JOIN THE TOUR!Intertek has the largest network of EMC labs in North America. Learn how EMC testing and certification strategies can optimize resources to meet the challenges of new product development/introduction, information needed from testing and speed-to-market issues. In addition, the open houses will showcase all the other testing capabilities available such as safety, performance and certification.

WHO SHOULD ATTEND: Manufacturers of electrical and electronic devices, engineers, EMC Engineers, Engineering Managers, VP of Engineering, and Compliance Managers/Directors

OPEN HOUSES

ArrivalWelcome from General ManagerPresentation: “Why 50% of EMCtests fail on the first attempt” Facility tourLunchDeparture

• August 16th: Portland OR, at 7:00am (Breakfast & roundtable discussion)• August 22nd: Menlo Park CA, at 10:30am • August 29th: Boxborough & Littleton MA, at 10:30am• September 7th: Duluth GA, at 10:30am• September 19th: Richardson TX, at 10:30am• November 1st: Oakdale, MN at 10:30am

At the Open Houses you can tour our state-of-the-art EMC facilities, learn how to better prepare your products for testing, and speak directly to our knowledgeable engineers. To showcase our expansive capabilities locally, we offer open houses nationally which will include: ½ hour presentation seminar, expert speaker, tour of lab, lunch, and prizes.

WEBINARS

If you cannot attend the Open Houses, you may register for a free webinar and learn valuable information to improve your products as well as your testing and certification processes led by Intertek’s leading experts on the following topics:

(Held at 2:00pm EST)

August 10th at 2:00 pm EDT“Global EMC Requirements: Keeping Up-To-Date When Change Is The Only Constant.” Presenter Bill Holz, Manager, Global Market Access Program, Intertek ETL SEMKO

This webinar will guide you through complex global EMC requirements. Get details on up-to-date country requirements, standards changes and how to achieve global compliance.

August 24th at 2:00 pm EDT“Transmitters, EMC, and Next Generation Product Designs.” Presenter Nick Abbondante, Project Engineer, Intertek ETL SEMKO

Today, next-generation commercial, industrial and consumer devices, or “smart appliances”, are communicating with one another. Embedded transmitters are making it all possible. Learn how this affects EMC compliance.

August 31st at 2:00 pm EST“Why 50% of EMC Tests Fail The First Attempt.”Presented by Roland Gubisch, Chief EMC Engineer, Intertek ETL SEMKO

The expert engineers at Intertek see thousands of EMC tests each year. After years of experience, we’ve discovered that 50% of products fail EMC tests on their first attempt. Gain these insights to ensure that you end up on the right side of that statistic.

Agenda:10:3010:4511:00 11:3012:151:30

IEEE EMC ACROSS AMERICA

Aug. 16, 7:00-8:30am Breakfast Forum“Buzz, Business, & Bold Ideas”

Join Intertek Moderator, Roland Gubisch, and expert panelists: Kurt Fischer, NIST; Lee Hill, Silent Solutions; Benoit Nadeau, Matrox; Henry Ott, Henry Ott Consultants; Stephen Stegner, Microsoft; Derek Walton, LF Research

Salon BallroomHilton Portland & Executive Tower921 SW Sixth AvenuePortland, OR

DRIVE SAFELY. GET THE ETL LISTED MARK!

Freedom of choice in product certification mirrors the freedom of the open road. Speed. Opportunity. Independence. Proceed quickly with Intertek’s ETL Listed mark and see why our 15-day turnaround time is a departure from the traffic and congestion.

ENTER FOR A CHANCE TO WIN A GARMIN iQue M5 with built in GPS Navigate the highways with a GARMIN iQue M5 with built in GPS. Navigate Global EMC Compliances with Intertek ETL SEMKO. Register for any one of our webinars or Open Houses and your name is automatically entered to win a GARMIN iQue M5 with built in GPS.

The drawing for a Garmin iQue M5 with built in GPS, valued at $700 (USD), is sponsored by Intertek Testing Services NA, Inc. 70 Codman Hill Rd., Boxborough, MA 01719. No purchase or obligation is necessary to participate.

CONTEST RULES

WINNER SELECTION: The drawing will be held on November 15, 2006. All entries must be received by 5 pm November 1, 2006. One entry will win (no second or third place winners). Intertek is not responsible for lost or otherwise not received entries.

ELIGIBILITY: The drawing is open to all those who register online and have received Intertek’s EMC Across America mailing or emailing. Intertek employees and family members, employees and family members of Intertek's marketing, advertising, promotion or fulfillment partners, and employees from other testing organizations are not eligible to win.

NOTIFICATION/TERMS: Winners will be notified by electronic mail on November 16, 2006. If winner's e-mail address is not valid and the winners fail to return any required documentation within fourteen (14) days of prize notification, the result will be automatic prize forfeiture. If a prize is forfeited for any reason, an alternate winner will be chosen from the random drawing of all eligible entries. For confirmed winners, the prize will be sent via FedEx to the winners entered location.

PRIVACY POLICY: Intertek does not sell its customer names, addresses, or other information to third parties outside of Intertek. This site registration form requires users to provide contact information (names and email addresses). Your contact information will be used to follow up any questions entered, inform of upcoming testing services, and/or receive newsletter information. Respondents can opt out of receiving any future material by emailing icenter@intertek.com

Attend our Open House on August 29th

• Chamber: 3m Semi-Anechoic• Emissions Sites: 10m and 30m (OATS)• Specialties: Medical devices, transmitters, ground penetrating radar, telecom, consumer products, laser and ultrasound, military EMC• Reporting: Test data delivered same day testing is completed. • NARTE-Certified Engineers on-site• Additional services: Electrical safety testing, performance testing, SEMI F47, telecom, NSF, and military gasket testing

EMC LAB SPECIFICATIONS

Attend our Open House on August 22nd

• Chambers: 3m, 10m Semi-Anechoic • Emissions Sites: 10m Semi-Anechoic• Radiated Emission: 60Hz – 40GHz• Specialties: Intentional transmitters for FCC, IC, EU, Japan, and Taiwan; medical devices: EMC MIL-STD; GR-1089-CORE, Sections 2 and 3• NARTE-Certified Engineers on-site• Additional services: Electrical safety testing, GR-63-Core, Section 4.2.2.2, fire resistance

Attend our Open House on September 7th

• Chambers: (Immunity & Emissions) 3m, 10m Semi-Anechoic • Radiated Emissions from 20 Hz to 40 GHz• ESD to 30 kV• Specialties: Medical devices, transmitters for US, Canada and EU, NEBS GR-1089 Sections 2 and 3, EMC for audio/video equipment for EU• NARTE-Certified Engineers on-site• Additional services: Electrical safety testing, telecom testing

Attend our Open House on November 1st

• Chambers: 3m Semi-Anechoic • Emissions Sites: 3m, 10m and 30m (OATS)• Specialties: Medical devices, transmitters, automotive, lighting fixture testing• NARTE-Certified Engineers on-site• Additional services: Electrical safety testing

Attend our Open House on September 19th

• Chamber: 3m Semi-Anechoic Chamber• Emissions Sites: 3m and 10m (OATS)• Specialties: Industrial, lighting, ITE, medical, laboratory, intentional radiators, FCC Part 18, Part 15, Product safety GMAP • Reporting: Test data delivered same day testing is completed.

EMC LAB SPECIFICATIONS

Attend our Open House on August 29th

• Chamber: 5m Semi-Anechoic capable of producing field strengths up to 600v/m. • Emissions Sites: 3m and 10m (OATS)• Specialties: Medical devices, transmitters, EMC portion of safety standards (ie. UL991)• Reporting: Test data delivered same day testing is completed. • Strengths: Sole AEMCLAP, GM and Ford Motor Company approved lab in the region. • NARTE-Certified Engineers on-site• Additional services: Environmental performance (vibration, temp/humidity cycling, thermal shock) and SEMI F47

To request a private tour of this facility, call 1-800-WORLDLAB

• Chamber: 3m and 10m Semi-Anechoic Chamber• Specialities: NEBS, EMC, Wireless• Reporting: Test data delivered same day testing is completed. • Strengths: Only 3rd party laboratory in Kentucky. On-site Specific Absorption Rate (SAR) testing capabilities.• Additional services: Environmental (temperature, humidity, altitude, accelerated weathering), earthquake and vibration testing, SAR and wireless testing, fire spread testing, acoustical testing, lightning surge and power fault testing

To request a private tour of this facility, call 1-800-WORLDLAB

• Chamber: 3m Semi-Anechoic • Emissions Sites: 3m, 10m (OATS)• Specialties: ITE Medical Industrial Limited MIL-STD-461/462, Limited RTCA DO-160 Radio• Reporting: Test data delivered same day testing is completed. • NARTE-Certified Engineers on-site• Strengths: Quick report turns, engineering advice available to clients during testing, training class for clients, continually building comfort level with client

To request a private tour of this facility, call 1-800-WORLDLAB

• Chamber: 3m Semi-Anechoic • Emissions Sites: 3m and 10m (OATS)• Specialties: Medical devices, transmitters, EMC portion of safety standards (ie. UL991)• Reporting: Formal test report delivered within 15 business days following completion of testing• NARTE-Certified Engineers on-site• Additional services: Electrical safety

EMC LAB SPECIFICATIONS

To request a private tour of this facility, call 1-800-WORLDLAB

• Chamber: 3m Semi-Anechoic • Safety and EMC Field Engineering Service Available• Reporting: Test data delivered within 5 business days once testing is completed • NARTE-Certified Engineers on-site• Strengths: Fast turn-around, best of breed engineers• Additional services: Electrical safety testing, IP testing (dust chamber, water testing), flammability of plastics, and sanitation (NSF), Gas Fired Product Testing

CONTACT INFORMATION:800-WORLDLAB

www.intertek-etlsemko.com/emcicenter@intertek.com