Job Performance Requirement 16-11
-
Upload
ingrid-brewer -
Category
Documents
-
view
26 -
download
1
description
Transcript of Job Performance Requirement 16-11
JPR 16-11A
A Make certain that the vehicle is stabilized. The windshield should be “chopped” along the bottom edge with a pick-head axe. Placing a hand on the
pick of the axe will help control it, making certain that only one corner of the blade penetrates the glass.
JPR 16-11B
B The front roof posts on both the passenger side and driver side should be cut through next, using cutters or
hand tools such as a reciprocating saw or hacksaw.
JPR 16-11C
C Relief cuts are placed in the roof on both sidesof the vehicle, allowing ample space to gain
access when the roof is folded.
JPR 16-11D
D A tool such as a pike pole is placed across therear section of roof. Apply downward pressure to
form a fulcrum for the windshield and roofportion being folded over.