JAWBONE ICON MANUAL

2
TALKING POINTS 1 GET CONNECTED IN 30 SECONDS SLIDE ON LED PRESS + HOLD TALK BUTTON 1.1 PREPARE YOUR JAWBONE Press and hold the TALK BUTTON while sliding ON your Jawbone until the LED flashes RED + WHITE . This indicates that the Jawbone is ready to connect (pairing mode). 1.2 PREPARE YOUR PHONE Turn on the Bluetooth® settings. ON AN IPHONE® Go to SETTINGS > GENERAL > and enable BLUETOOTH® ON A BLACKBERRY® Go to SETTINGS/OPTIONS > BLUETOOTH > and enable BLUETOOTH® OTHER CELL PHONES Go to JAWBONE.COM/PAIRING or review the instruction manual that came with your phone 1.3 MAKE THE CONNECTION Go to your phone’s Bluetooth® settings. ADD OR SEARCH FOR DEVICES When “Jawbone ICON” appears, select it IF ASKED FOR A PASSCODE, enter “ 0000 This is a one-time event you should not have to repeat, unless you are connecting your Jawbone headset to a new phone. 2 GET COMFORTABLE 2.1 FIND YOUR FIT Mix and match to select the most comfortable and secure fit option. Jawbone can be worn WITH or WITHOUT an earloop. 2.2 DROP, TWIST & POINT For the most secure fit, place your Jawbone in your ear pointing down. Then twist it upwards so it points directly at your mouth.

Transcript of JAWBONE ICON MANUAL

Page 1: JAWBONE ICON MANUAL

TALKING POINTS

1GET

CONNECTEDIN 30 SECONDS

SLIDE ON

LED

PRESS + HOLDTALK BUTTON

1 . 1 PREPARE YOUR JAWBONE

Press and hold the TALK BUTTON while sliding ON your Jawbone until the LED flashes RED + WHITE . This indicates that the Jawbone is ready to connect (pairing mode).

1 . 2 PREPARE YOUR PHONE

Turn on the Bluetooth® settings.

ON AN IPHONE ®

Go to SETTINGS > GENERAL >

and enable BLUETOOTH ®

ON A BLACKBERRY®

Go to SETTINGS/OPTIONS >

BLUETOOTH > and enableBLUETOOTH ®

OTHER CELL PHONES

Go to JAWBONE .COM / PAIRING

or review the instruction manualthat came with your phone

1 . 3 MAKE THE CONNECTION

Go to your phone’s Bluetooth® settings.

ADD OR SEARCH FOR DEVICES

When “Jawbone ICON” appears, select it

IF ASKED FOR A PASSCODE,

enter “0000”

This is a one-time event you should not have to repeat, unless you are connecting your Jawbone headsetto a new phone.

2GET

COMFORTABLE

2 . 1 F IND YOUR FIT

Mix and match to select the most comfortable and secure fit option.

Jawbone can be worn WITH orWITHOUT an earloop.

2 . 2 DROP, TWIST & POINT

For the most secure fit, place your Jawbone in your ear pointing down. Then twist it upwards so it points directly at your mouth.

Page 2: JAWBONE ICON MANUAL

2 . 3 ENSURE BEST QUALIT Y

Jawbone works regardless of position, but you will get the best performance if the Voice Activity Sensor physically touches your cheek.

VOICEACTIVIT YSENSOR

3TALK

T A L K B U T T O N

3 . 1 TAKE A CALL

Press the TALK BUTTON on your Jawbone to answer. When you are finished talking, press the TALK

BUTTON to hang up.

3 . 2 MAKE A CALL

Use your phone to dial as usual. Listen and talk through your Jawbone. To hang up, just press the TALK BUTTON .

4POWER UP,

ETC.L E D

4 . 1 GET JUICED

Your Jawbone is partially charged and ready for use right out of the box.

WHEN BATTERY LOW

The LED indicator flashes RED .

FOR A FULL CHARGE

Plug it in.

NOTE It takes 40 minutes to get your Jawbone 80% charged. A full charge takes 90 minutes.

WHEN FULLY CHARGED

The LED indicator turns WHITE .

G ET MORE H E LP ( IF YOU NEED IT )

VISIT JAWBONE .COM / SUPPORT

CALL 1 - 877 - ALIPHCO ( 254 - 7426)

GO TO JAWBONE .COM / WARRANT Y

for warranty info

PURCHASE the official JawboneCar Charger and other accessoriesat JAWBONE .COM

Become a fan of Jawboneon Facebook®VISIT JAWBONE .COM / FACEBOOK

© 2 0 1 0 A L I P H C O M . A L L R I G H T S R E S E R V E D . 7 7 0 - 0 0 1 5 0 R E V H