Jasopels product catalogue 2013

JasopelsCatalogue 2013

–professionel til skindet


Design/produktion: w

ww

.rosendahls.dk

Fabriksvej 19, 7441 Bording, DenmarkPhone +45 98 42 05 66

[email protected]


15

54

32

63

47

24

3 The times are favorable5 Wire6 Breeding boxes10 Mountings, fittings and clips13 Mink sheds20 Water equipment21 Manure systems22 Service and Spare part kits23 Farm Manager 24 Article with Burmølle Mink26 Soffie feeding machines29 Spare parts for feeding machines30 Article with Villy Hestbech31 Feed silos32 Training33 Article with Freddy Christiansen 35 Jasopels Drums40 Slicing Machine T3 XL41 Skinning Machine T1144 Jasopels MaxiHook

45 Article with Hundebøl Mink47 Jasopels Pelting Robot XXL49 Article with Jens Christian Thomsen50 Jasopels Fleshing Automat T652 Jasopels Fleshing Automat T4/T554 Article with John Lykke56 Article with Søren Hansen57 Impellers60 Article with Søren Buhl61 WRAP MaxiStretch63 Article with Rasmus Bøgsted64 Jasopels Maxi Trolley66 Jasopels Skin Remover SnapMax 67 Sleeves and boards69 Skin Cleaning Automat T572 Farm articles76 World Wide Agents78 Contacts

Palle HansenSales consultant

+45 [email protected]

2

Content Contacts

78www.jasopels.com www.jasopels.com

Tommy [email protected]

Export sales +45 98 42 05 66

Export sales +45 98 42 05 66

Logistics+45 98 42 05 66

Technical supervisors +45 98 42 05 66

Casper SpannerManager / Polen +48 502202909

[email protected]

Mogens KristensenSales consultant


Brian SkødebergNielsen

Sales consultant+45 30172806

[email protected]

Dennis Daa JensenService Manager


Kim DahlService

Technical [email protected]

Morten [email protected]

Poul BachCEO Jasopels A/S


Bronek GutowskiSales consultant +48 502202404

[email protected]

Kasia MatysiakOffice manager+ 48 509161333

[email protected]

Justyna UrbanowiczOffice assistant+48 517750512

[email protected]

Administration +45 89 20 61 88

Jakub SkikiewiczSales consultant


Børge VindSales consultant

+45 30172805 [email protected]

It's been a good year for Jasopels and it is by and large thanks to our talented and dedicated employees who are goal-ori-ented in their daily work with sales, service and development of new, effective products for fur farmers.

This catalog will give you a complete view of the market's strongest product portfolio that our customers highly appre-ciate with regards to such vital points as quality, finish, user-friendliness and last but not least – excellent value for money!

A better boardJasopels is launching a revolutionary new board with proper-ties that ensure large skins. The board is made of a sturdy plas-tic material and has few movable parts, so it is durable, stable and easy to use. It can change its circumference as much as 10 mm all the way at the top, which makes it easier to take the skin off the board and thanks to efficient barbs it ensures the right skin size.

We have already drawn your attention to the WRAP Maxi Stretch Stretching machine before, but there is a good reason to do it again, as customers are incredibly happy with the re-sults they can achieve thanks to this machine. It ensures opti-mal sizes and is easy to use and cheap to run. It is clearly a hit.

New, quick Fleshing Automat T6Jasopels is launching the new Fleshing Automat, T6, which we tested thoroughly in the past pelting season. The T6 is quick, clean and efficient thanks to the ability to adjust the beam’s pressure and speed in four different zones. You can both see and feel it on the skins!

The beam returns quickly in order to be ready for the next skin. The impellers are self-adjusting, which also saves the us-er’s time otherwise spent adjusting the distance to the beam. And finally, the Fleshing Automat T6 requires far less mainte-nance than its predecessors.

Farm Manager is the futureFarm Manager is a great tool that gathers and keeps track of all the important information on the farm. In the catalog you can read more about this smart system that we have devel-oped with fur farming in mind.

Farm Manager has an impact on all aspects of daily work on the farm. It gives its users a better overview and helps in-crease their profits. We sell it and install it on all types of feed-ing machines.

Make use of our training sessionsTake part in on one of our training sessions and take full ad-vantage of your new machine! It is definitely worthwhile and even experienced breeders will find new ways of improving production once they learn about the machine's full potential. At the same time it is a good deal because when the machines achieve better results, the breeders will get full value for their investments.

In keeping with the timesJasopels has exclusive distribution rights for the world's best wire, CrapalPremium®, which is made of a unique anti-corro-sion alloy developed especially for breeders who have special requirements regarding the products’ lifespan. A quality pro-duct which we sell for the right price!

Only the best for the industryHere at Jasopels we focus on development. Therefore, we are constantly working on improving our product portfolio. We keep investing in order to future-proof our machinery and equipment so that we can offer the best to the industry. It is our tradition to do this in dialogue with fur farmers so we can continue making the world's best skins.

Welcome to Jasopels’ new product catalog. I hope you will en-joy the read!

The times are favorable and Jasopels presents interesting news…

3www.jasopels.com

Presentation

Code no. Product description Price

2021-062716 Top part of double cage, 6 compartments,

stainless, ass., incl. front door *

2011-062716 Top part of double cage,

6 compartments 27", ass., incl. front door *

2031-06271636 Double cage, 36" + 27", ass.

with stainless bottom wire, bent 9" *

2031-069012 Double cage, 36" + 27", ass.

with stainless bottom wire, bent 9", 2.45 mm *

2021-06271636 Double cage, ass., 36" + 27" stainless

bottom wire bent 9", complete stainless *

2031-069018 Cage, ass. 6/90 cm, Maxi top wire

stainless bottom wire, bent 9" *

2031-069019 Cage, ass., 6/90 cm, Maxi top wire

stainless bottom wire, bent 9", 2.45 mm *

2031-0690192 Cage, ass., 6/90 cm, 3/4" X1" stainless bottom,

bent 9", 2.45 mm, stainless feeding wire *

2011-069018 Cage, ass., 6/90 cm combi, with Maxi Crapal *

2021-0690121 Cage, ass., 6/90 cm, 3/4" X1", stainless 2x bottom

wire, bent, complete stainless, 2.45 mm *

2010-06271636 Cage, unass., 36" + 27" *

2030-0690192 Cage, unass., 36" + 27"

with stainless bottom wire, bent 9", 2.45 mm. *

2030-06271636 Cage, unass., 36" + 27" with stainless bottom wire,

bent 9". *

2030-0690162 Cage, unass., 6/90 cm, combi top wire

stainless bottom wire, bent 9", 2.45 mm. *

2030-069017 Cage, unass., 6/90 cm, combi top wire

stainless bottom wire, bent 9". *

2011-0575164 Cage, 5/75 cm, Jump-up model 2002

incl. breeding box of birch plywood. *

Wire

Cages

CrapalPremium®

Sold only by Jasopels.CrapalPremium® is ArcelorMittal WireSoltuions’ patented zink+aluminium+magnesium alloy.This extra anti-rust alloy is especially designed for users who have high expectations regarding the product’s lifespan. This alloy is guaranteed to have a lifespan that is 8 times lon-

ger than of similar heavily galvanized products exposed to the same conditions.CrapalPremium® is an anti-rust alloy that consists of 95% zink and 5% aluminium as well as a controlled content of magne-sium. CrapalPremium® can also be delivered in plasticized coils and panels.

Jasopels – when top quality must be at the right price!

5www.jasopels.com

Wire

Breeding Boxes

It is a priority for us to keep developing products that are dura-ble and highly functional, which is why we are able to offer you the most attractive breeding box on the market. Our breeding boxes are made of 11 layers of hard-pressed birch plywood.

A unique groove in the rear panel for the locking spring, which ensures a pleasant and easy open/close function. Thanks to the tapered grooves in the panels, the countersunk holes have no annoying edges. All mountings are of stainless steel, so the quality is perfect.

We have a very strong standard program regarding deliveries of many types of breeding boxes at attractive prices.

All holes are pre-drilled to ensure correct mounting of fittings.All partition walls are pre-drilled to ensure correct assembly of boxes.Unique grooves in the rear panels eliminate the need to install locks.120 mm hole in the front panel.

Jasopels Breeding Boxes are made using CNC machinery, which gives an

accuracy of 1/10 mm on all boxes.

6www.jasopels.com

Breeding Boxes


2121-010609 Breeding box, 6 compartments, ass., 11 x 12".

Special f/double cage *

2121-210600 Breeding box, 6 compartments, ass. 9 x 12".

With plastic nest & cover, without shutter *

2121-210610 Breeding box, 6 compartments, ass. 9 x 12".

With plastic nest, cover & shutter *

2111-210600 Breeding box, 6 compartments, Dutch type ass.

With cover, plastic nest, without shutter *

2121-210601 Breeding box, 6 compartments, ass., 9 x 12". With cover,

plastic nest, 3/4" X1", stainless, without shutter *

2121-2106010 Breeding box, 6 compartments, ass., 9 x 12".

With cover, plastic nest, 3/4" X1", stainless, with shutter *

Birch plywood / Dutch type breeding boxes

7www.jasopels.com

Breeding Boxes


2110-110800 1 Breeding box with 8 room,

Greek model, in green wood

2030-089010 2 Cage with 8 room, have 2 mm stainless steel

bottom and top mounted door, rest is in Premium.

2

1

Breeding boxes

8www.jasopels.com

Breeding Boxes

Breeding Boxes

Cage and Breeding box, 8 room in our well known quality.

Top mounted door in stainless steel, with 4 mm handle.

9www.jasopels.com

Breeding Boxes


654

321

121110

987

181716

151413

2019

2115-1310 1 Angle hinge 65 x 65 x 11 mm 0,30

2115-1300 2 Angle hinge 110 mm x 20 mm 2,04 mm 0,35

2115-1000 3 Locking plate for breeding box 0,20

2115-1100 4 Metal whirl 0,20

2115-1210 5 Cage hook for breeding box, stainless 0,30

1232-01151 6 Band for breeding box, 14 cm x 50 m. 20,30

1232-01175 7 Manual band rewinder *

2215-1135015 8 Torx screws for front doors 3,5 x 15, 200 pcs. 26,40

2115-1595 9 Shutter/bulkhead rail, stainless 0,30

2115-1700 10 Shutter/bulkhead, galvanized, for 12 cm hole 1,75

2115-1720 11 Shutter, “fork model” 12,85

2115-200120 12 Alu. plate, hole in the middle 1,95

2115-200100 13 Alu. plate, hole on the side 1,95

2115-2000 14 Spring for cage door, stainless 0,25

2116-000128 15 Cage hook, 12,8 cm 0,60

2116-000950 16 Cage hook, 95 cm 0,85

2210-150005 17 Cage card holder, Morsø, plastic, with screw 0,15

2210-150001 18 Cage card holder, stainless, short, without screw 0,20

2210-150002 19 Cage card holder, stainless, long, without screw 0,30

2210-150006 20 Cage card holder, Morsø, plastic, double, multi 0,25

2210-150010 21 Cage card holder, stainless, double, BK model 3,75

2012-1080 22 Loose hogrings 1/2" Crapal 10,15

2012-1060 Loose hogrings 3/8” Crapal 10,15

2022-1080 Loose hogrings 1/2" stainless, approx. 1100 pcs./kg 18,50

2022-1060 Loose hogrings 3/8” stainless, approx. 1100 pcs./kg 16,25

2012-20601 23 C-rings 3/8” alu, magazine 18.000 pcs. *

2022-20601 C-rings 3/8” stainless, magazine 18.000 pcs. *

2012-20816 24 A-16 rings alu magazine 1.000 pcs. 10,20

2022-20816 A-16 rings stainless magazine 26,40

2423

21

22

Mountings, fittings and hog rings

10www.jasopels.com

Breeding Boxes

65

8

4

7

321



1261-15504 1 Tube GVA R120 x 155 x 5 mm 0,80

1261-15505 2 Tube R43 small, GVA approx. 15 cm 0,40

1261-155060 3 Tube with ribs GVA R120x150 mm 0,80

1261-155065 4 Tube Ø 120 x 400 5 mm 1,60

2016-121416160 5 Shelf for cage 12 x 14” rolled *

2016-080916080 6 Shelf for V- model 11x11” bent *

1261-14003 7 Uniq screen, 16 mm 3,30

1261-14006 8 Screen module, NF, plastic, black 1,45

2018-609121170 1 Nest, plastic, 9" x 12", with lid *

2018-609120170 2 Nest, plastic, 9" x 12", without lid *

2018-609121370 3 Nest, 9" x 12", with stainless lid, 1" x 3/4" *

2018-610121170 4 Nest, plastic, 10" x 12", with Crapal lid *

2018-611121170 5 Nest, plastic, 11" x 12", with lid *

2016-091216081 6 Plastic nest bottom, 9" x 12", 1/2" x 1" *

2018-509121160 7 Locking spring, 9" x 12", 1"x1" *


1260-10021 1 Pliers/tong, Swedish 45,00

1260-10022 2 Pliers/tong, with magazine, Ottensten 60,15

1260-100030 3 Jasopels C-ring pistol 810,00

1260-10055 4 Cutter, pneumatic, MR-20 330,00

1260-100551 5 Jaws for MR-20, P6 80,00

1260-10050 6 Wire cutter, electric, Bosch 470,00

54 6

321

Toys/Shelves

Nests

Pliers/Tongs

11www.jasopels.com

Breeding Boxes

2015-3611510 1 Puppy net, 90 cm, plastic without frame

11,5"x36" = 29 cm. x 91 cm. *

2015-3611511 2 Puppy net, 90 cm, plastic with frame

11,5"x36" = 29 cm. x 91 cm. *

2035-0690 Frame for puppy net, 90 cm *



2015-77301624 Bottom wire, combi, 1" x 1" x 1,5" x 30", 76 cm *

2015-77361624 Bottom wire, combi, 1" x 1" x 1,5" x 36", 91 cm *

2015-77181616 Rear wire, 1" x 1", 18" x 77", Ø 2,00 *

2015-770916122 Feeding wire, 3/4" x 1", 9" x 77" *

2015-770816162 Feeding wire, 1" x 1", 8" x 77" *

2015-770816164 Feeding wire, 1" x 1", 8" x 77" *

2015-770916164 Feeding wire, 1" x 1", 9" x 77", *

2013-551801 Partition walls, 18" x 55", 70 cm, ass., Crapal *

2013-551800 Partition walls, 18" x 55", 70 cm, unass., Crapal *

2013-731801 Partition walls, 18" x 73", 90 cm, ass., Crapal *

2013-731800 Partition walls, 18" x 73", 90 cm, unass., Crapal *

2025-77452426 Bottom panel, stainless, 9 x 1" + 17" x 1,5 + 1 x 2", Ø 2,45 *

2025-77451224 Bottom panel, stainless, 12 x 3/4" + 17 x 1,5" + 1 x 2", Ø 2,00 *

2025-77452424 Bottom panel, stainless, 9 x 1" + 17 x 1,5" + 1 x 2", Ø 2,00 *

2025-77452425 Bottom panel, stainless, 23 x 1,5" + 1 x 2", Ø 2,45 *


2018-112111609 1 Cage door for 6 rooms, 12" x 11", combi *

2018-112111608 2 Cage door for 6 rooms, 12" x 11", 1/2" x 1" *

2018-112111616 3 Cage door for 6 rooms, 12" x 11", 1" x 1" *

2018-112121609 4 Cage door for 6 rooms, 12" x 12", combi *

2018-409121608 5 Bottom door, 9" x 12", 1/2" x 1", with frame/hinge *

2018-409123 6 Bottom door, 9" x 12", 1" x 1", without hinges *

2018-509120160 7 Locking spring, ass., 9” x 12”, 1” x 1” *

Puppy netCrapalPremium®

Wire panels

Doors

1 2

12www.jasopels.com

Wire

Rafters 2” x 5” / 2” x 4” rafter legs, usually delivered assembled.

ALL rafters are delivered with consoles for breeding

boxes mounted directly on the rafters.

Battens 70 x 70 mm

Boards for data cards 25 x 100 mm, first-class quality

Ridge board 25 x 125 mm, pressure-impregnated

Roofing sheets Full-squared, “step-safe” 600R in full length

Ridge White pvc foil, 60 cm. UV resistant

Rafters 2” x 5” / 2” x 4” rafter legs, usually delivered assembled.



Battens 70 x 70 mm



Roofing sheets Full-squared, “step-safe” 600R in full length


Specifications Specifications

Mink sheds

Mink shed, open, 2 rowsMink shed, open,

2 rows, double cages

13www.jasopels.com

Mink sheds

Over the years Jasopels has built up a high level of experience in building open mink sheds. This makes us one of the mink industry’s preferred cooperation partners. If you are a breeder and are thinking of building mink sheds, we are ready to give you all the professional assistance you need.

Our goal is to be the best supplier of quality mink sheds for the best price on the market. We discovered many years ago how important it is to listen to input from breeders and pass it on to our designers in order to achieve the best results.

Our carpenters set up and deliver the very best products to the customers’ full satisfaction. Of course, you can also choose one of our do-it-yourself solutions.

The quality of the materials will always be the same as that of the mink sheds that we set up for you.

We are in constant dialogue with our suppliers regarding product development in order to keep on improving the qua-lity of our products. The mink sheds we build have a sturdy construction and do not “tip” when it is windy. We put a lot of effort into including extra support in the construction of the mink sheds so that they can stand up to wind and rough weather.

If you are thinking of extending your mink sheds, you are more than welcome to contact Jasopels – we are always ready to provide you with advice and help you choose a solution that matches your needs and wishes.

Rafters 2” x 5” / 2” x 4” rafter legs, 4- and 6-row modules are

usually delivered assembled, 2” x 5” principal rafters.



Roof rafters 2” x 4” / 2” x 5”

Battens 70 x 70 mm



Roofing sheets Ivarsson, “step-safe” 700T


Rooflights B9, 1,2 mm, pvc “step-safe”

Ridge White pvc foil, 60 cm, UV resistant

Gable paneling Corus IP steel profile plates

Wind ties BMF hollow ties 2,0 x 24/40 mm

Rafter bracing Rafter wood 45 x 97 mm

Nails Hot-dip galvanized

Screws Climat

Foundation Made based on engineer’s calculations

Feeding aisle, inside width At least 130 cm as a standard

Mucking aisle, inside width At least 80 cm as a standard

Specifications

Mink shed, open, 4-16 rows

14www.jasopels.com

Mink sheds

Specifications

Rafters 2” x 5” / 2” x 4” rafter legs, 4- and 6-row modules are

usually delivered assembled, 2” x 5” principal rafters.



Roof rafters 2” x 4” / 2” x 5”

Battens 70 x 70 mm



Roofing sheets Ivarsson, rounded corners, pre-drilled holes

“step-safe” 700T eternite


Rooflights B9, 1,2 mm, pvc “step-safe”

Ridge White pvc foil, 60 cm, UV resistant

Gable paneling Corus IP steel profile plates

Side paneling Corus IP steel profile plates

Wire covering,

windows Crapal 14 x 75 cm. 1” x 1”, split to 25” in width

Wire covering,

bottom ventilation Crapal 14 x 75 cm. 1” x 1”.

Wind ties BMF hollow ties 2,0 x 24/40 mm

Rafter bracing Rafter wood 45 x 97 mm

Nails Hot-dip galvanized

Screws Climat

Foundation Made based on engineer’s calculations

Gates 220 cm x 220 cm gable gate,

pressure-impregnated wood,

standard: 2 pcs. per gable

Windows 60 x 200 cm, pressure-impregnated wood

(35 x 50 mm)

Battens for 3 m free spans 2" x 6" rafter wood,

BMF 45 x 9 7 mm beam hanger

Battens for 4 m free spans 2" x 8" rafter wood in

BMF 45 x 97 mm beam hanger

Feeding aisle, inside width At least 130 cm as a standard

Mucking aisle, inside width At least 80 cm as a standard

Mink shed, closed, 4-16 rows

15www.jasopels.com

Mink sheds

Front and gable paneling

Battens

The Jasopels front and gable paneling is made of mainte-nance-free steel plates. The standard color is the “Swedish red” (terracotta red), but other colors are also available.

Jasopels uses perforated steel plates as a standard for gables and/or as side paneling, although these only come in a limited range of colors.

The current standard in all Jasopels sheds that have more than 2 rows is to have 2 battens per roofing sheet. Planed, rounded, kiln-dried rafter wood is used (70 x 70 mm), sorted according to the T1 principle.

Such a construction means extra sturdiness and support for the shed as well as safety when walking the roof. Further-more, this ensures compliance with applicable regulations for similar constructions.

16www.jasopels.com

Mink sheds


2214-4030065 Ridge, 60 cm, white, 30 m *

2214-4010000 Footing stone for mink shed *

2214-4020091 Roofing sheet 600 R, Ivarsson 227 cm. Full length *

2214-4020095 Fence plate 600 R, Ivarsson 1.086 x 2.275 *

2210-10294 Rafter, assemble yourself, standard *

2210-102941 Rafter, assemble yourself, climb cages *

Building materials

BracingBracing is made with hollow ties as cross bracing on rafters below the roof battens.

Furthermore, cross bracing is made in the shape of "V's" from the bottom of the data card boards to the bottom of the roof rafters throughout the entire width of the shed.

The number of crosses depends on the number of spans.Finally, there is also longitudinal bracing with rafter wood (45 x 97 mm) on the tallest rafter legs throughout the en-tire length of the shed; in the driving spans, though, with 45 x 120 mm rafter wood. Jasopels also includes lattice girders for extra bracing in 8-10-row sheds and in 12-row sheds.

17www.jasopels.com

Mink sheds

Gable gates

Side gates

The Jasopels closed sheds are delivered as a standard with 1 steel plate gate and 1 wire gate in each gable. The gates are rolling/sliding gates with a Svalk 300 kg mounting.

The Jasopels closed sheds can be delivered with vertical lifting gates with or without automated remote control, for mounting in the extra tall driving spans.

Automatic control for luxury gate.

18www.jasopels.com

Mink sheds

2116-203000 Steel console *

2116-203005 Steel console *


Steel consoles

Roof gutters

Jasopels produces galvanized steel consoles for cages, breeding boxes and manure pipes. They can be used in sheds with steel rafters etc.

The consoles can be found in various versions: with “feet” – for mounting on concrete floors and other level surfaces or with longer “legs” for imbedding. The consoles are made of 40 mm rectangular pipes with welded-on galvanized brackets for manure pipes and plates for mounting of mink data cards.

As a standard Jasopels uses 5-6” plastisol-coated steel gut-ter pipes from LINDAB with 3” downpipes.

Having the gutter pipes made of steel ensures better du-rability and significantly better sturdiness than it is in the case of the commonly used PVC gutter pipes.

19www.jasopels.com

Mink sheds


1220-05000 1 Drinking valve, biting, Gjøl, green 0,75

1220-05010 2 Drinking valve, biting, thermo, Gjøl, green 0,95

1220-03101 3 Valve, biting, stainless, white, Columbus 0,70

1220-03102 4 Valve, biting, stainless, black, Columbus 0,80

1220-02103 5 Valve, biting, ØKO, incl. steel holder, Morsø 0,80

1220-02250 6 Gasket for valve 0,08

1220-01201 7 Valve holder, single 0,11

1220-01202 Valve holder, double 0,11

1220-01203 Holder for Forelco Thermohose 0,25

1220-02201 8 Metal holder for Morsø valves 0,20

1220-09207 9 Metal holder for drinking valve, stainless 0,20

1220-03201 10 Holder for Columbus and Gjøl valves 0,10

1221-01106 11 Connector, black, 3/4", with inner gasket 2,05

1221-01103 12 Connector, RG, 3/4", for PEL hose 5,55

1221-01102 13 Connector, 3/4", for PEL hose 1,55

1221-01105 14 Hose connection without screw cap, 3/4”, for pipe 3,40

1221-01104 15 Hose connection with screw cap, 3/4”, for pipe 3,40

1221-02201 16 Angle, RG, 3/4", for PEL hose 3,60

1221-02202 17 Angle 3/4” with screw cap 3,40

1221-02203 18 Angle 3/4” without screw cap 3,40

1221-02200 19 Angle, 3/4", for PEL hose 1,50

1221-02151 20 T-pipe, 3/4", for PEL hose 1,80

1221-01150 21 T-piece, RG, 3/4", for PEL hose 12,85

1221-02250 22 Screw cap, RG, foe PEL hose 3,90

1221-02325 23 Plastic tap, 3/4", for PEL hose 13,40

1222-01101 24 Reducing valve, RG, without manometer 89,20

1222-011010 25 Manometer for reducing valve 12,85

1222-011011 26 Repair kit for RG reducing valve 53,40

1222-01250 27 Draining 0,60

1222-01251 28 Draining for drinking valve, Morsø 0,60

1222-01300 29 Drinking cup, Berima, double 0,90

1221-01128 30 Thermopipe, Gjøl, 6 rooms, 206 cm, incl. green valves 15,55

1221-01101 31 PEL hose, 3/4", 100 m. 85,00

1221-02327 32 Loop, complete 13,10

5056-00176 33 Clamp 3/4, 22-32 2,70

242322

654

321

121110

987

272625

302928 31 3332

18

21

1716

151413

2019

Water equipment

20www.jasopels.com

Water

2314-33800150 Pump 6,5 hp, dry mounting *

2314-33800130 Pump, 2 hp, back flush, complete *

2314-33800120 Control cabinet with interval start *

2313-33160490 Tank overflow 160 mm, galvanized *

2315-33800100 Dry well 1000 x 2000 mm *

2311-33001020 Manure pipe, Gjøl, grey, 350 mm. of 6 m. *

2311-33250425 Drain, Gjøl, grey/black, excl. gutter *

2311-33001060 End, Gjøl, black, 350 mm. *

2311-33001070 End, Gjøl, grey, 350 mm. *

2311-33001080 Suspension for Gjøl drain, 680 mm, incl. bolt *

2311-33001090 Hanger for Gjøl end panel *

2311-33001095 Suspension strap, flat steel 20x3 mm. *

2311-33300050 Manure scraper, manual for Gjøl *



Manure systems Manure pumps

Washing machine for manure guttersCode no. 2318-3700000

Jasopels Farm CatCode no. 2318-37502003

Gutters and fittings

Price EUR

1.490,00

Jasopels does not compromise…Jasopels offer the most flexible manure system on the market – tailored to your farm and your needs. We are ready to deliver back flush systems with dry-mounted pumps.

We do not compromise when it comes to our common goal - the environment. All materials are therefore approved for this purpose and the installation is, of course, performed by special-ly trained employees. Jasopels offers all the commonly known manure systems, both Farmcat and wire drive solutions.

Effective cleaning of manure gutters, 200 m per hour.No spattering around the shed, on cages, mink or personnel. The manure stays in the gutter. Reduced risk of infection.

For this season we have produced an entirely new FarmCat for automatic manure removal.

New, improved control systemDouble forward drive – boogieNew charging systemPowerful motorStainless chainNew batteriesLess maintenance neededMade of stainless materialsShielding of vital parts

New

Price EUR

1.625,00

21www.jasopels.com

Manure systems

3173-174101000 Spare parts kit for Pelting Robot 1.205,00

3285-00028980 Spare parts kit for Fleshing Automat 1.205,00

3285-00128980 Spare parts kit for Slicing Machine T3 800,00

3285-00158980 Spare parts kit for Body Hook T4 340,00

3285-00188980 Spare parts kit for Skinning Machine 205,00

3285-00348981 Spare parts kit for WRAP-T4 800,00

3285-00348982 Spare parts kit for WRAP MaxiStretch 675,00


Service

Citing the motto “prevention is better than cure”, we would very much like to draw your attention to service and mainte-nance.

At Jasopels we like to be prepared, but we know that even though we try hard to be ahead of schedule, time moves quick-ly and our technical staff are overloaded during the pelting season.

In order to provide you with the best possible service, if you al-ready know that some of your machines need servicing, main-tenance or repair, please call us to arrange a visit at yourpelting house in good time prior to pelting time.

Spare part kits

We all know how costly it is when machines go on strike during production – this also happens in pelting centers. This is why we offer you spare part kits!

When a problem occurs and the production process is interrupted, it is often a part which can be found in the spare parts kit that needs to be used to fix the problem. By having a spare parts kit on site the breeder can save a lot of money. The reparation that needs to be made can often be done with assistance over the phone.

22www.jasopels.com

Service

Jasopels has hit the bull’s eye with a feeding system for mink farms that can do so much more than just feed the animals individually and quickly.Many breeders have already purchased the Jasopels Farm Manager feeding system and are using it on their farms. The breeders have given their input and expressed their wishes with regards to the feeding system. Farm Manager is now on such a high level that it can satisfy all farms’ and all breeders’ special wishes concerning daily feeding in their own individual way instead of forcing the breeders to adjust to the system.

Farm Manager is used on mink farms where between 1.000 and 12.000 females are bred. We have fulfilled all the require-ments concerning Farm Manager that were expressed by the mink breeders. The everyday challenges on the farms are a challenge for Jasopels as well. This is why we have developed the feeding system.

Call us to book a demonstration of Farm Manager and let us know if you have any ideas that will let us make our system “the world’s best feeding system”.

• The system automatically generates lists of ill animals.• The system always knows where it is without the operator

having to “remind” it.• The system creates records of medicine, defects on the farm

and dead animals.• A stable system that removes the daily portion of hard work,

frost and water.• Quick and slow feeding in the same row without having to

press any buttons.• Quick and easy adjusting of food amounts for every cage.• Overview and buttons that are big enough for the thumb of a

real man.• The program is available in several languages and for several

breeders on the same machine.• Fully automatic backup and many units that communicate

with each other and share data.• It is possible to create birth rate curves, illness records, death

records, puppy numbers, feed statistics and growth cycle re-cords without having to connect to any extra equipment.

• Reverse function, thanks to which the machine does not waste feed when driving out of the rows and when there are several empty cages in a row.

– possibly the best feeding system for mink farms in the world


4020-00622 Joystick for Farm Manager 830,00

4020-0057 Farm Manager 8.095,00

23www.jasopels.com

Farm Manager

Farm Manager allows you to control individual feeding

By journalist Thorkild Høj

Lars Kristensen and his brother Jack run Burmølle Mink to-gether outside Holsterbro. Their farm is a well-established business with over 10.000 females.

Two seasons ago they worked with a system for individual feeding that they did not find satisfactory. Their goal has al-ways been that of achieving optimal feeding, increased well-being and larger animals. At that time Jasopels introduced the new data-driven Farm Manager and Jack Kristensen decided to purchase Farm Manager along with the big Soffie 1500D feeding machine from Jasopels.

– We have been using Farm Manager on our entire farm since April 2012 and the results have been satisfactory, as we now have larger animals, just like we wanted. There is more peace in the mink sheds as the animals are getting the amounts of feed that they need and fewer skins have been damaged, which is probably also due to the fact that the ani-mals have been getting enough feed and thriving even more, says Jack Kristensen.

– It took a lot of time and energy to start using Farm Mana-ger, but I think it was worth the effort. In the puppy season the number of animals in each cage was different. On the first day we spent a lot of time putting the feed manually, but after that the computer remembered everything and I could have had virtually anybody do the feeding because Farm Manager

controls the whole process. The system has allowed us to use the feed in an optimal way, says the ambitious mink breeder.

Farm Manager consists of a well-arranged screen that is mounted on the feeding machine. On the screen the user can retrieve and input various types of data thanks to a set of pre-loaded symbols just by touching the screen lightly.

Farm Manager is always up to date as far as the machine’s location on the farm, feed and (if applicable) medicine con-sumption as well as other essential information concerning each cage are concerned.

– Yet another advantage of the system is that if I am away from the farm, I can receive lists by phone or by e-mail. This allows me to determine whether I need to have my employees e.g. go and check some of the cages the following morning. This way we can reduce the number of errors and see to any irregularities that may occur, says Jack Kristensen.

– It takes time and energy, and it forces you to change the methods that you are used to, but this is also the case with alternative solutions. Getting started probably took two or three weeks but getting to know all the details of Farm Manager takes even longer. But once you have done that, work just flows.

– In the case of our farm using Farm Manager has meant more peace in the cages, less damage to the skins and larger animals. At the same time we have eliminated feed waste,

24www.jasopels.com

Farm Manager

which is also very important. I have measured the skins after they have been stretched and they are larger this year, says Jack Kristensen.

Burmølle Mink purchased their first Soffie 1500D feed-ing machine in 2011 along with Farm Manager, which was fol-lowed by another one so that the entire farm could be covered.

Burmølle Mink have installed an ergonomic arm rest, as each of the machines operates for over six hours a day. Apart from that, Burmølle Mink have adjusted the feed pump in or-der to combine a maximum amount of distributed feed with low rpms.

– Jasopels has provided very good service – they listened to our requests and adjusted the feeding machines and the computer the way we wanted it. We have had some technical problems under commissioning. Other than that it was hard to get rid of old habits, but now that we had the system properly run in, there are really a lot of advantages of using the system and it has allowed us to achieve the desired results, says Jack Kristensen.

– The system has been working on the entire farm since April 2012. The animals have been getting the amounts of feed

that they need and we have had no feed waste in comparison with the period prior to getting Farm Manager. As we started using the system when it was brand new, we got all the “child-hood diseases” along with it. But to Jasopels’ credit I must say that they come when we call them and they get the problems solved, so we have had no major interruptions in production. But there was a period when Kenneth Zobbe, who has devel-oped Farm Manager for Jasopels, was a frequent guest on our farm, says Jack Kristensen with a twinkle in his eye.

In connection with the acquisition of Farm Manager Burmølle Mink have also installed a wireless network in their sheds so that communication with the computer can take place non-stop, regardless of the feeding machine’s location.

This also means that it is possible to make modifications and update Farm Manager at any time and thus avoid having to interrupt work to do that. It is also possible to retrieve data from the system while working, which can help the user avoid waiting time when new tasks come up while at work, e.g. if the user discovers the need for that during feeding.

25www.jasopels.com

Farm Manager

4-way adjustable seat

Servo-steering, small turning radius, easy to maneuver

Low noise level and easy maintenance

Tiltable feed tank for easier cleaning

Extra strength and sturdy construction equals low running costs

Multiple extra accessories

Newly-developed and improved cooling system

ENGINE 26 hp KUBOTA. 3 cyl. water-cooled diesel

TRANSMISSION Fully hydraulic, 40 l tank

STEERING Servo

DIESEL TANK 40 l

FEEDING PUMP Steplessly adjustable XL gear wheel pump

FEED TANK Stainless steel, 600 l

WATER TANK Stainless steel, 60 l

MEASUREMENTS L: 245 cm W: 85 cm H:140 cm

Specifications

Technical data

Soffie feeding machines

Soffie 600DCode no. 4010-001

Price EUR from:

18.250,00

Feeding machines that give you maximum assistance on your fur farm…

Soffie feeding machines have been developed and produced to take care of the daily chores of delivering many tons of feed to animals on the farm for many years. The machine’s con-struction is very sturdy and gives the user maximum assistance on a fur farm.

The feeding machine has been on the mar-ket for many years and it is well-known among breeders all over the world. Over the years it has been modernized and further developed, but we will keep on developing it in order to meet the requirements and expectations that this type of machines needs to live up to.

If you want to get to know Soffie better, just ask your friends in the business about it or, which is even better, contact Jasopels for fur-ther information and a to book a demonstra-tion.

26www.jasopels.com

Feeding machines


Servo-steering, small turning radius, easy to maneuver


Tiltable feed tank with mixer

Water dosage





STEERING Servo

DIESEL TANK 40 l


FEED TANK Stainless steel, 700 l, with mixer



Specifications

Technical data


Servo-steering, articulated

4WD, traction tires on all 4 wheels


Extra strength and sturdy construction equals low running costs


Also available without a mixer in the feed tank

Maintenance-friendly feed tank (tiltable to the side) with a quick-

action coupling on the feeding hose between tractor and trailer




STEERING Servo

DIESEL TANK 40 l


FEED TANK Stainless steel, 950 l



Specifications

Technical data


Code no. 4010-0011 Soffie 700D, with mixer and water tank.

Price EUR

23.000,00

New


Code no. 4010-0021 Soffie 950D, articulated, with mixer and water tank.

Price EUR from:

27.050,00

27www.jasopels.com

Feeding machines

Articulated with servo-steering

4WD, traction tires on all 4 wheels

Feeding hose between tractor and trailer

Feed tank with built-in mixer and safety system

4-way adjustable, air-cushioned seat

New Kubota 1505 low-emission engine

Oil cooler

Water dosage

Maintenance-friendly feed tank (tiltable to the side) with a quick-

action coupling on the feeding hose between tractor and trailer


ENGINE KUBOTA 1505 35 hp / 26,2 kW

TRANSMISSION Fully hydraulic, 55 l oil tank with oil cooler

STEERING Servo

DIESEL TANK 55 l


FEED TANK 1320 l or 1520 l stainless steel feed tank with mixer

WATER TANK 50 l

MEASUREMENTS 1320 l: L: 375 cm W: 89 cm H:155 cm

1520 l: L: 375 cm W: 90 cm H:165 cm

Specifications

Technical data

Soffie 1500D

Code no. 4010-0041 Soffie 1500D, articulated, with mixer 1320 l.

Price EUR from:

30.400,00Code no. 4010-0042 Soffie 1500D, articulated, with mixer 1520 l.

Price EUR from:

31.750,00

One KillCode no. 4320-00075

Avoid sick and injured animals on the farmQuick and easy way of putting the animals down with CO2 Enough CO2 for 35 minutes – the gas cylinder can be refilledPutting down possible during feedingWith a small (1 kg) CO2 cylinderWith One Kill you are prepared for a visit from the authoritiesOne Kill can be mounted on all types of feeding machines

Price EUR

800,00

28www.jasopels.com

Feeding machines

5018-02111Water pump for regulated feeding 20 l/min powerful

5013-0018Feeding sprout, plastic, Ø-40mm

5018-0211Water pump for regulated feeding 12 l/min

5013-0019Feeding sprout, stainless

4020-0011Air-cushioned seat MSG 75/521 N

4020-00555013-00195Jasopels feeding computerEasy grip for feeding hose

4020-0035Arm rest for hose holder

5020-010003Feeding pump Soffie XL 4 M

5020-010001Feeding pump Soffie XL 4 M

4120-006Work light

5013-0010Feeding hose, soft, blue, 1,6 m

5020-010081Feeding pump Minkomatic 560/570 4 M

5020-010080Feeding pump Minkomatic 409/530 4 M

5020-010060Feeding pump Twinca 4 M

5018-02112Water pump for regulated feeding 22 l/min

Hydraulic return filter on top of the tank Soffie

5020-2900441Hydraulic filter s 600/950/1400/1500/1600

5019-3016Fuel filter, Soffie 600-1500

5020-2900440Pressure filter Soffie 600/950 1400-1600

5019-3018Fuel filter, Soffie

5011-740910Fuel filter/diesel filter, big

5018-02001Reverse contact/press-button switch

5019-3150Air filter 25/28 hk 905/1505

5018-0465Insert for blue pedal

5018-0464Blue pedal for Soffie and 560/570

5055-2129Complete wheel, traction pattern

3271-00188003O-ring for encoder

5940-10125031 female5940-10125030 male

Bearing SI 30 ES M30x2 inner/outer thread5020-29008311

Steering knob for Soffie

5020-290043

Spare parts for feeding machines

29www.jasopels.com

Feeding machines


Last season Jasopels presented a new, handy feeding ma-chine – Soffie 700D. The machine has a feed tank at the front and a mixer, and it can get around in the mink sheds even when there is little room.

Mink breeder Villy Hestbech from near Struer bought a new Soffie 700D last year, and he has been very pleased with the new feeding machine, which he describes as handy and relia-ble. It has helped the mink breeder with an annoying problem."The mixer is a big hit. Now I can get the feed to have the ex-act consistency that I want and I am really happy with that. We no longer have to struggle with very rigid and unmanage-able lumps of feed," says Villy Hestbech.

"Another advantage is that I have the opportunity to en-hance the feed with extra ingredients much more efficiently, e.g. when the animals have stomach trouble. I can also be sure that the medication is evenly distributed and is not gathered somewhere in uneven clumps," says Villy Hestbech.

"The feed should have a thin consistency so that it hangs down in the cage just enough for a mink to take a mouthful. With the mixer it is easier to achieve a uniform result, and it is very satisfying to see how evenly the feed is coming out of the feeding hose, instead of having water and food running al-most separately."

On the farm they have always worked with a feed tank at the front of the feeding machine. There is not much space at

the ends of their sheds, so the larger feeding machines with a tank and a mixer have never been an option.

"We have often had to stand there and bang on the feed tank with a broomstick when the feed was too rigid and clumped together, so it is a great relief to have the mixer. It makes adding a little water and getting it properly distributed so much easier," says Villy Hestbech.

"In the puppy season, for example, it is also a huge advan-tage that we can add extra water so the puppies that do not drink much still get enough liquids to survive. Yes, there are many advantages of the new feeding machine", says the mink breeder.

One of the advantages, however, was not well received by Villy Hestbech.

"We got an ergonomic armrest, in which case you are sup-posed to put the feeding hose up in the holder and then drive around and feed. But in our sheds we have a number posts that you cannot just pass with such an armrest, and there-fore we had to take care of that many times in each shed. And we got really tired of that very soon! Jasopels had to move the hose from the feed tank, so we now have it lying above the knee, as we always have. Thanks to that we drive freely and easily through the sheds and feeding work has been going very well without extra support for the arm," says Villy Hest-bech.

Due to the mentioned conversion Jasopels has been offer-ing to Soffie 700D either with an ergonomic armrest or, as in Villy Hestbech's case, with a shorter, hand-held feeding hose.

A handy feeding machineMakes work much easier

30www.jasopels.com

Feeding machines

4310-010 Feed silo, stainless, 2.500 l *






4310-014 Feed silo, stainless, 2 x 2.500 l *





4310-025010 Stairs for stainless silo 2.500 l, 10 steps *

4310-025012 Stairs for stainless silo 3.300/5.000 l, 12 steps *

4310-025014 Stairs for stainless silo 4.000/6.000 l, 14 steps *

4310-025016 Stairs for stainless silo, 15 steps *


Call us to learn more and get a quote. Prices start at 5.190,-Gangway from 600 x 1500 mm to 600 x 5.000 mm in length

Feed silos

31www.jasopels.com

Feed silos

Training

Take part in a training session and make money!

With the Jasopels pelting machines work is performed quick-ly and correctly. This way efficient working conditions and high quality of the final product are ensured.

Jasopels are now stronger than ever in their efforts to offer fur farmers the best solutions for skin handling, whether what you want is a solution for the entire process or just individual machines.

Jasopels provides effective solutions for all phases of the process (putting the animals down, skinning, scraping, stretching and drying) until the moment when the skins are in the storage room, ready to be shipped. Every step is per-formed in the professionally best possible way.

The machines are designed and developed based on many years of experience in the fur industry.

In our development department accomplished professionals work all year long to develop and improve the machines so that we can always offer you the best products on the market.

We test the machines thoroughly before they are released for sale in order to make sure that you get products that are all of high quality. At the same time we focus significantly on achieving the best possible working functions.

In order to make work even easier and more efficient, we have developed a number of unique tools and machines over the years. Their task is to transport mink skins, bodies and sawdust during the pelting process so that everything can be done in a single operation cycle, with great efficiency and with work satisfaction as a result.

Jasopels offers all users of new Jasopels machines practical training aimed at allowing them to get the most out of the pelting process and helping them become familiar with the machines before pelting season.

Last season a couple hundred mink breeders agreed to par-ticipate in Jasopels' practical training in the use of the Wrap Maxi Stretch stretching machine with spindle (2 days), Fleshing Automat XL (2 days) and Pelting Robot (2 days).

It gives you overview and energy to keep the pelting center running effectively – e.g. during peak load periods, when it is necessary to change a spare part – so that you can move the production process forward as soon as possible.

In 2013, the courses are being held in September 30 - October 4 and October 7-11. "We invite all breeders who have bought a new pelting ma-chine of one of the mentioned types to participate in a trai-ning session concerning the machines’ operation so that they can get the best possible results out of the skins," says Mogens Kristensen.

Henrik Bækgaard, who is a consultant at the National Cen-tre for Fur Animals, thinks that the courses are a good idea. "Pelting errors due to ignorance, carelessness, haste or lacking knowledge of the machines cost the industry millions of euro every year. Therefore, there is much money to be saved by

32www.jasopels.com

Pelting machines

taking part in the training session because you get to make mistakes and learn from them here, and then go home and do a far better job on your own farm,” says the consultant. If you have questions about the training, please feel free to contact your local sales representative or call +45 9842 0566.

On the following pages you will find our selection of machines and accessories. We are ready to provide service with the aim of creating the best solution for you and your fur farm.

If you have any questions, please feel free to contact Jasopels at any time.


Mink breeder Freddy Christiansen replaced his old fleshing automat with a new model last season. Upon doing that he decided to participate in Jasopels' training session held in Frederikshavn.

"Before I left home to go to the training session, I thought that after 10 years I knew enough of what was worth knowing about fleshing machines, but now I'm really glad that I attend-ed the training session,” says Freddy Christiansen.

"During the training we had a lot of opportunities to exper-iment with the fleshing automat and test it out in ways you don’t do at home, in your own pelting facility. At home we are more likely to do what we are used to. Here we could sudden-ly see a clear difference in the outcome and it has given me an even greater understanding of what fleshing machines can do,” says Freddy Christiansen.

There were 6 - 8 people on each team, so there was time to talk and everyone got a chance to try the different challenges along the way, so we became familiar with all of the fleshing automat’s different functions.

"In the course of the training session we tried a lot of dif-ferent settings, changed impellers and worked with different pressure settings, and we got to see all the different results that came out of it. It makes a huge difference to be in Fred-erikshavn and have time for all this. On one’s own fur farm there are plenty of other things that always need attention.

Talking to other breeders also provides tips and inspiration, as they also come with a lot of experience in trying to create the best possible result,” says Freddy Christiansen.

Jasopels offers practical training sessions that allow the us-ers to get the most out of their expensive machines. The aim of the sessions is for the users to become more familiar with the machinery before the season starts. The training session devoted to the use of the Jasopels Fleshing Automat T5 takes two days so that the participants really get an opportunity to go through all the functions and become familiar with the machine. Another goal is for the participants to be able to per-form elementary maintenance and service tasks so that un-planned interruptions in the production process do not take place during the pelting season. Last but not least, we want the users to be able to make the necessary adjustments them-selves and this way make sure that they achieve the best re-sults.

"When you think about it, the amounts of money we run through the pelting center are huge, and everything that can lead to better results is worth the money in the end. The train-ing session is also a really good deal and I am thinking of par-ticipating again if a follow-up course is held in a couple of years. Now I know that it makes sense to keeping yourself up to date,” says Freddy Christiansen.

Freddy Christiansen made a good investment

33www.jasopels.com

Pelting machines


3250-003006 1 Trolley for bodies 1.610,00

4320-00027 2 Gas box, incl. electric start 5.315,00

4320-00035 3 Conveyor for gas box 225 cm. incl. wheels 2.370,00

4320-000350 4 Conveyor for gas box 285 cm. incl. wheels 2.650,00

1 2

New sturdier model

When using a Gas Box, a Conveyor and a Body Drum, you will experience higher efficiency in the process of putting the animals down.

34www.jasopels.com

Pelting machines

Jasopels Body DrumCode no. 3240-290200

Price excl. suction device EUR

12.150,00

New tumbling methodReliable constructionNo compressed air necessary

Technical data

Dimensions L: 240 cm H: 210 cm W: 175 cm

Electrical connection 3 x 400 Volt N + PE

Jasopels Drums

The new family of Jasopels’ effective drums has already be-come highly appreciated by both Danish and foreign fur far-mers. This is, of course, a result of many factors. The success is by and large due to the fact that apart from being effective and reliable, the machines have been designed with the ut-most attention paid to both safety and the working environ-ment.

It is characteristic for all new Jasopels drums that the ro-tating core is encapsulated. In this way we made sure that the user cannot get to the moving parts unintentionally. The traditional belt drive is no longer used in the new drums. This means that you get a drum without tensile stress and you save money on wearing parts. The large wheels are driven by direct drive with a soft-start feature, which ensures smooth operation, and at the same time the absence of belts makes the machines very quiet. We have, of course, equipped the larger models with the latest digital technology, which makes programming very easy.

Put suction on your drums to improve the working environment.

Regardless of how good and expensive sawdust you are using, there will always be varying occurrences of what is called dan-gerous dust, which is basically dust smaller than 0,063 mm.

Dust is as such very light and it is practically invisible to the naked eye. All wood contains a certain amount micro- organisms, yeast and mould fungus, which may cause serious respiratory diseases.

If you want to improve the working environment in your pelting center, we recommend that you install suction devices with your drums. The machinery itself is placed outside of the pelting center in order to eliminate both noise and dust from the workplace.

35www.jasopels.com

Pelting machines

Safety kit for the drum

Technical data


Ø 100 cm. Drum diameter

Electrical connection 3 x 400 Volt + PE


Technical data

3240-206000 Body Drum with sliding door, right 8.775,00

3240-206001 Body Drum with sliding door, left 8.775,00

3280-00209870 Safety kit, wire set 670,00

Capacity 100 males / 120 females

Electrical connection 3 x 400 Volt + N + PE

Air 0,05 l/min and 8 bar


Body Drum

Fill the drum with mink and start it. You can set the tumbling time yourself. When the set tumbling time is up, the drum will automatically remove the mink and the sawdust will remain inside the drum.

Price EUR

8.775,00

Jasopels Leather Side DrumCode no. 3221-220825

Tumbles and cleans the skins twiceBetter tumblingLarger drum diameterNo belt drive

Price EUR

6.745,00

36www.jasopels.com

Pelting machines

Technical data


Ø 120 cm. Closed

Electrical connection 3 x 400 Volt N + PE

Technical data

Capacity Approx. 80 males / 110 females


Air 2 l/min max 8 bar


Technical data



Skin/Leather Side DrumCode no. 3240-290100

Suction device for Jasopels Body Drum and Skin Drum

Code no. 3220-800403

Skin DrumCode no. 3240-290000

New tumbling methodReliable constructionCan be connected to the Skin Moving SystemNo compressed airExcl. Skin Moving System

Price excl. suction device and skin moving system EUR

12.150,00

Price incl. pipes EUR

2.030,00

The skins are tumbled in a closed drumSwitches to net drum automaticallyThe drum removes sawdust itselfAutomatic removal of the fursAir-operated loading lid

A time saver that you can really feel!

Price EUR

9.450,00

37www.jasopels.com

Pelting machines

3280-00209920

5923-70000508

Safety set for Body Drum

Pizzato ISO electronic stop

5150-00201070Driving wheel

5150-00201060Support wheel for drum

5150-00201050Support wheel for drum

3280-00209930Safety cover for wheels

5961-00054242 V-belt B167, inside measure 4242 mm

5150-1105132Eccentric lock no. 105

2310-32002040Wire 4 mm, stainless

5923-70012078Pizzato emergency contact


3250-831300 Conveyor belt, rubber, 15 x 300 cm 2.700,00



Spare parts for drums

3250-832151 Conveyor belt, 150 cm., incl. control panel 2.690,00




Conveyor Belt for Body DrumThe Conveyor Belt is supposed to be placed right by the Body Drum. It needs to be placed in such a way that the mink bodies, as they leave the drum, are fed directly onto the conveyor belt, which thanks to a control module will transport them at the same tempo as that of the slicing and skinning performed by the Slicing Machine/Pelting Robot.

Conveyor Belt for Skinning Machine T3/T4

Place the Conveyor Belt after the Skinning Machine. It will then transport the bodies to the container. Excl. stand.

38www.jasopels.com

Pelting machines

3250-118250 Conveyor belt for Slicing Machine T2 2,5 m. excl. stand 1.530,00

3221-225000 Conveyor belt for Leather Side Drum with stand 1.610,00

3250-118200 Conveyor belt 2 m. excl. stand 1.340,00


3280-00120444Laser beam for cross cut marking

5120-00122241Belly paddle XL – Slicing Machine T3

3393-1501ARKANSAS grindstone

5940-10020608Glasier bearing PAF 0608 for paw knives

5120-00110163Knife holder

5120-00120750Paw plate T3 2006, new left

5940-11200031Slide bearing

3271-00110115Circular knife for T2 Ø 50 mm

5120-00120751 5940-10600201Paw plate T3 2006, new right Ball bearing Ø15 x 32 x 9

3271-00110066Knife for paw cut, left

3271-00110166Knife, round, Ø 50 mm

5120-00120166Knife, round, Ø 80 mm

3271-00110067Knife for paw cut, right

5120-00110165Air engine cross cut

5120-001263727Air engine Slicing Machine T3 – Right

5120-0012637216Air engine Slicing Machine T3 – Left

5963-05903542509Gates toothed belt GT3 5MGT 425-09

Conveyor Belt

Increase the capacity by over 30%

Place the Conveyor Belt under the Slicing Machine. The conveyor Belt transports the mink to the Body Hook. Suitable for Slicing Machine T2 and T3.

Price EUR

1.340,00excl. stand.

Spare parts for Slicing Machine T3 XL

3271-00110060Paw holding brick, left

3271-00110061Paw holding brick, right

39www.jasopels.com

Pelting machines

Technical data


Air 600 l/min and 8 bar

Dimensions W: 120 cm H: 120 cm D: 65 cm

Weight 100 kg

Slicing Machine T3 XLCode no. 3210-120000

Price EUR

16.880,00

Slicing Machine T3 XL with laser for slicing of cross cut.

This model has an increased stretch length and V-cut. The ma-chine’s process time is approx. 5 seconds per animal.

With a display, where you can read out cycle time and other relevant production data. Quick switching between males and females. Extra air regulator for setting the stretch pressure for both males and females. 100% correct triangle cut. The paddle is extra long. Streamline your workflow by placing a conveyor belt under the Slicing Machine.

40www.jasopels.com

Pelting machines

Technical data

Air 2,0 l/min and 8 bar


Skinning machine T11Code no. 3210-190000

New skinning methodEasy operation via foot pedalsBuilt-in seat that guarantees an ergonomically correct working position and makes work easier for the operatorBuilt-in conveyor beltSuitable for larger animalsVery large capacitySkins animals sliced and loosened using CombiCut

Price EUR

16.210,00

41www.jasopels.com

Pelting machines

Technical data


Air T3 XL 0,77 l/min and 8 bar

Air T4 XL 2,0 l/min and 8 bar

3210-188000

3120-174002040

Pneumatic knife, straight model

Head for head cutter with click system

3040-02060Spiral hose with quick-action coupling

3271-00110166Knife, round Ø50 x 16 x 1 mm

3271-00188003 Drive belt for pneumatic knife straight/angle, blue

3210-189000

3040-02051

Pneumatic knife, angle model

Counterweight 2-3 kg

3280-00179920Kit for rebuilding the holder of T3 Skinning Machine

3285-00188980Spare parts kit BS Hydr. Skinning Machine

5911-5228521011Foot pedal 5/2, yellow

5140-00186122Arm for holder, knuckle model

5140-00172018Skin holder, rubber, 13x62x96

Skinning machine T3/T4 XLCode no. 3210-1870000

Skinning Machine T4 XL incl. body remover

Price EUR

6.745,00The price includes hydraulics. Pneumatic knife and hanger are extra accessories.

This machine is easy to use and it is also available with an au-tomatic body remover. Improved Skinning Machine and shoul-der holder.

The stretch length has been increased by 250 mm. If the machine is placed together with a body remover and a small conveyor belt that transports the bodies to a container, the fur flow is better and the entire working process is optimized.

42www.jasopels.com

Pelting machines


3210-187500 Fleshing table, wood, double, for 2 Body 2.420,00

Hooks & 2 Skinning Machines, excl. Conveyor Belt

Technical data

Dimensions: 1,5 m.

Fleshing Table with Conveyor BeltCode no. 3210-187600

Fleshing Table

The conveyor belt is controlled by a sensor so that there is al-ways a mink ready at the outlet. This is highly time-saving for the skinning personnel.Incl. steering with sensor.

Conveyor

Price incl. Conveyor Belt EUR

4.720,00

43www.jasopels.com

Pelting machines

5923-54612102 3285-00158980Spare parts kitFoot pedal

5911-5228521011 5130-00140022Foot pedal 5/2, yellow Body holder

5130-00150120

5130-00153004 5130-00153005

Hook with ball, T3/T4, male model

PRD12-4DP2 Sensor Valve for Body Hook

5130-00140023

5130-00153003

Rubber for Body Hook

Roll by electric Body Hook

Technical data

Air Max 8 bar; 2 l/cycle


Electrical connection 230 Volt + L + N + PE

Relay Super resistant HPFI

Jasopels MaxiHook Code no. 3210-156001

A brand new body hook from Jasopels is born. Bye, bye air hos-es – welcome, electrical power supply! We call it:

Jasopels MaxiHook

A great advantage of having electrical power run the machine is that the force transferred is linear. This means that the force is the same throughout the entire process and your skins are loosened with a steady pull.

It is an advantage that you can both see and feel!

The shoulder lock has been updated as well to match the large animals that are bred on the farms.

Price EUR

6.070,00

44www.jasopels.com

Pelting machines


Mink breeder Søren Finnemann of Hundebøl Mink near Rød-ding purchased a new Pelting Robot XXL with the new skin moving system last season and his general assessment is that it was a good investment.

“I have been crazy about the system that moves skins away from the Pelting Robot from the day I saw it! Even before I got it delivered, I knew that it would make a big difference in my pelting center. With the previous pelting robot we had to stand there and grab the fat-covered side of the skin to move the skin away, and then we had to put our hands into a bucket with sawdust before grabbing the next mink. But every now and then we ended up leaving fat marks on the fur, which was quite annoying,” says Søren Finnemann.

“We had had the previous pelting robot since 2007 and it needed to be updated along with the safety package in order to live up to legal requirements. Although we did decide to go for that solution, it would still be a used machine. I thought it was a lot of money for an update and decided to get the latest version of the machine,” says Søren Finnemann.

“And on top of that, it was beginning to get hard with the largest skins. We had to take them off ourselves, which did not make much sense because we actually had a pelting robot to do the job. The new one can handle even the longest skins, and the adjustment of chain rollers is better compared to the old one. We don’t have to touch the fat-covered side of the skin any more now that the machine passes the skin onto the conveyor. It has definitely lived up to our expectations,” says Søren Finnemann.

“The pelting robot has been very stable. We have gone through around 12.000 skins during the season, on average 800 a day. Out top score was 1.200 skins in one day, which is very satisfying,” says Søren Finnemann.

“We can spend more time by the pelting robot, but now we have a new challenge. We must keep an eye on the box, where the skins end up once they are off the conveyor. We must make sure the box moves so that more skins can fit inside it. Otherwise we must go and grab it all the time, which is an-noying,” says Søren Finnemann.

“In general we are happy with the pelting robot. It fits well into a pelting facility like ours, where it is crucial that one person must be able to do the skinning work. However, we have not had a good relationship with the machine’s touch screen. It doesn’t react like a traditional button, so sometimes you end up standing there and keeping on pressing buttons several times until the machine registers it. The problem is, obviously, that we wear gloves, but we need to make it work better in the future,” says Søren Finnemann.

At Hundebøl Mink they have had one man work using the pelting robot, but sometimes rotation is needed to prevent work from becoming too much of the same.

“One ends up standing in the same way and supporting one’s body on the same leg all the time because of the foot pedal, so it is necessary to take a break. It is also an advantage to follow what is going on in the rest of the pelting facility and see what it is that gives good results,” says Søren Finnemann.

Skin conveyor has eliminated the problem of fat marks

45www.jasopels.com

Pelting machines

5320-955253Lintra cylinder

5923-54612105Insert for foot pedal

5320-100359Holder for tail roll

5320-0000015Leg hooks

5320-100295Spike chain

5320-0000064Rubber for switch

5320-0000018Feather for double cut

5320-100196Wheel for pneumatic knife

5320-000019Paw holder

5320-000006Contact for pneumatic knife

5320-000012Tight rolls for pneumatic knife

5320-00000418-edge knife, Ø50

5320-000008Scalpel knife

5320-0000060Bracket for sensor Ø25

5320-975000Air engine M53N1AS-015 (V)

5320-0000076Reed switch M/40P

5320-0000079Inductive sensor

5920-120438Foot pedal with emergency stop

3173-174101000Spare parts kit, 4 M Pelting Robot

5320-0000014Pneumatic oil

3271-00188003Belt, rubber Ø4

5320-0000077Inductive sensor for cylinder

5120-00120166Knife, round, Ø80 mm

3271-00110166Knife, round, Ø50 x 16 x 1 mm

3120-174002040Head for head cutter with click system

Spare parts for Pelting Robot

46www.jasopels.com

Pelting machines


5920-120443 Laser light for Pelting Robot 810,00

5320-0000019 Chair with console 945,00

5320-0000023 Light for Pelting Robot 2 x 18 W 379,00

5320-00000104 Skin Conveyor for Pelting Robot 6.750,00

Technical data

Process time approx. 20 seconds

Electrical connection 3 x 400 Volt + ground/fault current switch type B

Air 600 l/min + minimum 8 bar

Outer dimensions W: 1750 cm L: 1250 cm H: 3000 cm

Transport dimensions W: 1750 cm L: 1250 cm H: 2300 cm

Skin conveyor for Pelting Robot

Jasopels Pelting robot XXL

Code no. 3120-174002013

Price EUR

51.350,00

It is our great pleasure to present to you the Jasopels Pelting Robot XXL.

The Pelting Robot’s appearance is the same but its insides have been much im-proved. We have taken the best features from the previous models and put them together with the market's best skinning technology from our Skinning Machine T11, so we now dare promise you that you can skin even the biggest males yourself, without any unwanted stops during the process.

The skinning process takes place by means of a more linear motion and the number of movable parts has been re-duced so that the machine is more user-friendly. We have installed a bigger dis-play and loaded new software so your Pelting Robot XXL is ready to meet the challenges of forthcoming years – at least as far as size is concerned.

Improved skinning system, suitable for the largest animalsSimplified operationFaster trainingNew display with more functionsFaster skinning and thus greater capacity

TRAININGLearn to achieve optimal qua-lity using your Pelting Robot. Take part in Jasopels’ training

for machine users

47www.jasopels.com

Pelting machines

48www.jasopels.com

Jasop Fodercentral Service A/S | Knivholtvej 7 | DK-9900 Frederikshavn

Tlf. + 45 98 43 05 66 | Fax + 45 98 43 59 77 | E-mail: [email protected]

JASOPFodercentral Service A/S

Total supplier for mink feed kitchens

Exclusive distribution of CFS/Wolfking feed kitchen machines

Petsmo mink feed tanks

DME Weighing systems for mink feed tanks

New and renovated pumps manufactured specifically for mink feed

Forging and machine shop

Individual solutions in stainless steel

Wide range of second-hand feed kitchen machines and mink feed tanks

JASOPFodercentral Service A/S

Industrivej 6, 4200 Slagelse, Danmark. Tel. +45 58 55 52 00, Fax +45 58 50 10 31

http://www.CFS.com

Minkfoderanlægget til Foderfabrikken Lemvig er blot et af

mange komplette, fuldautomatiske, skræddersyede produk-

tions løsninger, som CFS har udviklet og installeret i tæt

kontakt med kunder overalt i verden i de seneste 15 år.

CFS er førende indenfor løsninger til forarbejdning,

forædling og pakning af kød, fisk, ost og dyrefoder. CFS

leverer alt lige fra enkelt maskiner eller pakkematerialer til

komplette produktionsløsninger inklusiv styresystemer og

software hertil.

CFS tilbyder ekspertise og professionalisme indenfor

Foderfabrikken Lemvig har

valgt en totalløsning fra CFS

de forskellige områder via engagerede teams, som arbejder

med forskning og udvikling, produktion, installation og

produktsupport. Dette suppleres af vore “Teknologi Centre”,

som er placeret strategisk i store industriområder verden

over, hvor vi arbejder sammen med kunder om at teste og

udvikle løsninger, som specifikt opfylder deres krav.

Overalt bakkes alle vore produkter op af vort uovertrufne

engagement i kundeservice, træning på produktionsstedet,

teknisk support og et verdensomspændende distributions-

netværk indenfor reservedele og materialer.

Annonce.indd 1 20-05-2010 13:30:51


Mink breeder Jens Christian Thomsen from near Årre bought a Jasopels Pelting Robot last season and chose to supply it with the new skin moving system, a conveyor belt with a sawdust container set up behind the robot so that the machine can put the skins in the back and has an opportunity to create an even better workflow for the entire pelting center and for the robot’s operator.

“I chose a used Jasopels Pelting Robot XXL with all the latest updates because I wanted to be able to work even with the largest males myself, and it has worked well throughout the season,” says Jens Christian Thomsen, who has gone through 15.000 mink using the robot with no problems.

“We never have to deal with sore arms any more, as we don’t have to take skins off the large males ourselves. The robot helped us increase our work tempo and gave the pelting center a nice rhythm,” says Jens Christian Thomsen.

The pelting robot moves the skins to the back and puts them on the skin conveyor, where there is also a sawdust container that gives every skin a little bit of sawdust while on the conveyor.

“The skin is moved away from the area around the pelting robot, and then we put them in boxes. Their next destination is the fleshing machine. We used to hang the skins on hangers and we had to stop every time we had 15-20 skins. With the skin conveyor we can work longer without stopping, which has given us a better working rhythm, as we are no longer in the way for each other,” says Jens Christian Thomsen.

There are to men who can take turns operating the pelting robot. They go through 100 females an hour (on average) and slightly fewer males. We can now operate the robot longer and work more efficiently because we can get a good workflow and focus 100% on the mink.

The start-up of the machine went fine, partly because Jens Christian Thomsen had had a pelting robot before, so he had no problems in the beginning. Jasopels’ installation employee, Kim, came over and set up the pelting robot and skin conveyor a week before the pelting season began.

“During the first week the combined operation of the robot and skin conveyor needed adjustments so that the machines could follow each other, but they have been working well together since then. I think that Jasopels has provided good service. The Pelting Robot is easy to operate. The programming simply makes it work. Every now and then you need to loosen a valve, but this can be taken care of on the phone, so we have not experienced a situation, where we would have to stop our production, which is great,” says Jens Christian Thomsen.

“The Pelting Robot works well, and it has freed us from quite a burden. We are happy with the way things are, as it means that we can let our bodies take it easy. You don’t get as tired when working with the pelting robot and all the auxiliary machines, which means that even smaller farms can now keep up with others in the efforts to make top quality skins,” says the mink breeder, who has around 1.000 females on his farm.

Pelting robot with skin conveyor

has given a better working rhythm

49www.jasopels.com

Pelting machines

Newly-developed self-adjusting impellersQuick changing of impellersShock absorption of the fleshing enginesAdjustable beam speed4 variable fleshing zones, speeds and pressuresClosed suction boxSeparate control cabinetAlmost no cleaningAutomatic travelling distanceSkin washPossibility of adjusting the speed of the fleshing engine

Self-adjusting impellers

Jasopels has developed a system that no longer requires you to adjust the impellers after installing new ones. The new Jasopels Fleshing Automat T6 adjusts the impellers itself based on the data that have been typed in on the user-friendly touch screen. The Fleshing Automat is therefore easy to oper-ate for new employees and gives the user a good and regular result!

No mess

Thanks to this “tidier” fleshing automat you can avoid unnec-essary stops for minor adjustments and cleaning.

The new Fleshing Automat T6 has many good features, one of which is that the mess it creates is minimal. Thanks to the new closed suction box the fat from the fleshing device does not get the fleshing automat dirty and at the same time it keeps the impellers quite clean.

The effect is an easier work day for you, a better working environment and, what is even more important, a better and more regular fleshing result and a greater capacity.

Jasopels Fleshing Automat T6Code no. 3220-020402

Code no. 3220-020402Price excl. suction device EUR

104.730,00

New

TRAININGLearn to achieve optimal

quality using your Jasopels Fleshing Automat. Take part in Jasopels’ training for machine

users.

50www.jasopels.com

Pelting machines

Fast change of impellers

The newly-developed system in the Jasopels Fleshing Automat T6 can move the impellers out of the suction box using com-pressed air. This improves working conditions while changing the impellers and makes things much easier.

After the impellers have been installed, they are moved to the right position via the display and then they are automati-cally adjusted. An experienced employee can do all this in just 5-7 minutes.

Technical data


Power consumption 32 amp



Dimensions / cabinet L: 60 cm H: 170 cm W: 40 cm

51www.jasopels.com

Pelting machines

Fleshing Automat T4/T5

It comes as no surprise that for decades the Jasopels Fleshing Automat XL has been praised as the best fleshing machine on the market. It performs a solid piece of fleshing work and it is quick, cheap to run and very reliable. – This is why we have made it even better!The big touch screen gives the operator quick overview and provides a chance to switch between the machine’s operating modes in an easy and manageable way. This allows you to achieve a more regular fleshing result even if your skin types are mixed!

Active Per4mance® is a system developed by Jasopels that makes it possible for you to change the beam speed and the impeller pressure of 4 independent zones. This allows you to adjust the machine precisely to your skins.

All impellers have been equipped with shock absorbers. In practice this means that the impellers stay on the skin, which results in a significantly better fleshing. At the same time the machine is a lot gentler when fleshing damaged skins!

Better fleshingLess risk of fat extraction Increased income

Jasopels Fleshing Automat T4/T5

The same Fleshing Automat as the T4 model but with 2 extra impellers for the front paws.

Our well known fleshing quality – now in a digital version!

Code no. 3220-020400Jasopels Fleshing Automat T4 Price excl. Suction device EUR

62.000,00

Code no. 3220-020399Jasopels Fleshing Automat T5.

Price excl. suction EUR

75.550,00

Technical data

El 3 x 400 Volt + N+PE.

Luft 10 l. / min. og 8 bar.

Mål L.: 440 cm. H.: 190 cm. B.: 100 cm.



users.

52www.jasopels.com

Pelting machines

Beam washerCode no. 3220-024400 Extra impellers

Code no. 3220-020450

Extra fat removalCode no. 3220-024405

53www.jasopels.com

Pelting machines

3220-020452 Skin Remover model 2010.Price Euro.

2.690,00

3220-024700 Skin Remover til T3, XL model.Price Euro.

1.340,00

Price incl. installation Euro.

9.190,00

Price incl. installation Euro.

6.620,00

Mechanical skin removerCode no. 3220-020452

Price excl. suction, Euro.

16.200,00

Chock absorberNew touch displayAll functions are digitally con-trolled - from pressure, speed to the beam insertion lengthGet a fast overview on your

skins, breeder directory, types of skins and much more…!

Get rid of the difficult fat, and residues of flesh, under the forelegs, with the new Extra fleshing. The impellers are mounted directly on the existing side impellers. New powerful motors in combination with a strong gear, secure that you don´t lose speed in fleshing!

The new invented chock absorber, in combination with variabel beamspeed, insures that your skins is better fleshed especially in the difficult areas around the neck, and frontpaws.

The beam is pressure washed with 60° hot water… It removes the need for clea-ning the beam with sawdust and makes your fleshing faster

and cheaper!

Adjustable skin remover to secure, that your skins are always put in the pos-sition you want – exactly in the middle

of the leatherside drum along with the sawdust. This improves the drumming

quality significantly.

Removes the loose and floating fat, before the

skin proceeds. In short – it makes the leatherside drum-ming more efficient!


Jasopels has developed a new Fleshing Automat, T6, with the goal of giving mink breeders even better efficiency and constantly good pelting results. The new fleshing automat has been tested by four different mink breeders in the previous season. One of the tests was carried out by John Lykke on his farm outside Janderup in Western Jutland.

“I think we fleshed 45.000 skins and 98% were all right. There are a lot of things that contribute to our increased fleshing efficiency. The more continuous operation has meant that we have been able to flesh more skins within the same amount of time, which is very satisfying,” says John Lykke and adds:

“It is not that we are unable to achieve a good result using the old machine, but the new Fleshing Automat T6 is simply easier to work with and more consistent. It makes less mess and it is easier to keep clean, which gives the employees more motivation to clean the area around the machine.”

“We have often changed impellers, approximately after 5.000 skins. One of the reasons why we did that was that it is so easy. The skins get fleshed in a more consistent way, also by the front paws. This means that I no longer have to walk around checking whether the result is acceptable. And this means the world to me because I also do fleshing work for others,” says John Lykke.

“For females we have been able to use way less pressure and a harder type of impeller than expected. This has

given us very good and consistent results, and we have also experienced fewer stops along the way, which, again, allowed us to flesh more skins within the same amount of time,” says John Lykke.

“Thanks to the machine’s design, the operator is no longer isolated behind a big box and becomes a part of the team working in the pelting center. This is beneficial for the working environment, and in my opinion it means a lot. So, in general I think that the new fleshing automat is an upgrade for the pelting center,” he concludes.

Jasopels’ service technician, Kurt Pedersen, who has been responsible for the development of the new Jasopels Fleshing Automat T6 said: “We started by taking the previous model completely apart and putting only what was necessary back together. This way got to a fleshing automat that is reliable, efficient and maintenance-friendly.”

The beam has been turned, so it is now taller than it is wide, thanks to which the front paws are always on the beam’s side. The beam is made of polyurethane cast around a steel core, it is very smooth and therefore easy to keep clean. The beam moves the skin towards the impellers that are divided into 4 zones, for which the operator can adjust pressure and speed, and then it gets pulled back quickly so that it is ready for the next skin.

Each of the four impellers has its own motor. The impellers come in different kinds and can be changed, depending on the type of skin that is to be fleshed. The impellers are self-adjusting, which saves the operator a lot of time, as

New Jasopels Fleshing Automat T6 increases efficiency and gives a better result

54www.jasopels.com

Pelting machines

the distance from the beam does not need to be manually adjusted. The front paw scraper also has its own motors. It is possible to adjust the speed of each of the motors individually and to adjust pressure and revolutions in order to achieve the optimal result. It is possible to remove the motors from the machine, which makes changing impellers quick and easy.

The impellers have a bigger diameter, thanks to which they are more effective. The skin – and the beam – gets rinsed with warm water during scraping. There is one central suction device that removes the fat effectively before the skin is treated with sawdust and transported away for tumbling. The sawdust device is now smaller but more efficient – dosage is controlled via a well-organized touch screen that can be programmed and updated online.

There is a sensor by the impellers. Its task is to register how long the skin is so that all of it gets fleshed. Both the beam and the fat scraping device are self-adjusting, thanks to which the operator is able to save time. In general the fleshing automat requires less maintenance. When the machine needs to be serviced, it is possible to open everything and all parts are easily accessible.

“In order to get the best out of the new Jasopels Fleshing Automat T6, it is important to take part in a training session before starting to use the machine. This makes things easier for the machines’ users and for our service team so that we can achieve the very best fleshing results together. Ultimately, it is also worth a lot of money!” says Kurt Pedersen.

Fat pump – Jasopels modelCode no. 3220-800218

Sawdust HeaterCode no. 3250-920225

Conveys the fat directly to an external container. The fat is conveyed to the container through a hose. The machine can pump fat 12 m horizontally and 3 m vertically – it all depends on the bend. Incl. blower and cyclone. Mounted on a stand.

The “good old” Sawdust Heater that is always in great demand – now in a new and modern version.

The machine has a large capacity. It can take approx. 5 bags of sawdust at a time. Sturdy construction. Equipped with large rubber wheels.

Price EUR

6.745,00

Price EUR

6.070,00

55www.jasopels.com

Pelting machines


Last season, mink breeder Søren Hansen from Hjejlundgård near Esbjerg used Jasopels’ new line of impellers, MotionWave. He experienced many advantages, such as less noise during fleshing, high quality at reduced pressure and longer lifespan of impellers, which, again, means saved time and lower expenses.

“Throughout the previous season we used our fleshing automat with the new, wave-shaped impellers from Jasopels. We used less pressure, but we still achieved a fleshing result that we find extremely satisfying. The impellers are less worn. You actually can’t even tell that they have been used just by looking at them,” says Søren Hansen, who has fleshed around 35.000 skins throughout the season because he also does fleshing work for three other mink breeders.

“There is a lot less noise coming from the machine during fleshing. I work next door from the room where our fleshing machine is. A couple of times I have actually gone to the other room to check whether they were having a break because I could not hear the machine work. But the machine was actually working and everything was all right. This was not the case before – the previous machines sometimes sounded like chippers,” says Søren Hansen, who has been following the development of 6-, 7- and 8-tooth impellers for years.

This season Søren Hansen has been primarily using the 8-tooth blue version of MotionWave impellers in his fleshing automat.

MotionWave is a newly-developed impeller with deeper grooves that take more fat away with every rotation, which is also enhanced by the wave-like cutting motion. The V-shaped teeth are slightly displaced from one another, which is where the name WaveMotion comes from. The impellers are sharpened very precisely, which means increased efficiency, even at a lower pressure. This way a gentle, more effective fleshing of the skin is achieved. The new impellers are produced in 7-, 8- and 9-tooth versions and come in different hardness variants, so they can be applied to every kind of mink skin.

“We used to be able to flesh half the amount of skins until it was necessary to change impellers. Even in the other half the new impellers do a great job and work like a Duracell battery. They keep on going and giving a great fleshing result,” says Søren Hansen.

“When I change impellers, I can’t actually see that they are worn. The old ones used to be chipped and have scratches, so it didn’t seem realistic to reuse them. But Jasopels’ employees have said that they can actually sharpen the new impellers again so we can save even more money. We will definitely try it,” says Søren Hansen.

”I think that my conclusion should bet hat the new impellers have allowed us to achieve a great result. We have controlled the skins thoroughly and we have not found errors on any of them. We haven’t had complaints from other people that we do fleshing for, so therefore I can say that we’re going to continue using the blue, wave-shaped impellers. They are the best ones we have tried so far,” concludes Søren Hansen.

Many advantages of Jasopels’ new MotionWave impellers

56www.jasopels.com

Pelting machines

A new series of Jasopels impellers is on the market. Thanks to the brand new wave pattern that we call the MotionWave, Jasopels has once again succeeded in taking effective fleshing to the next level. The new impellers have deeper grooves that can carry more fat, helped along the way by the undulating cutting motion.

On top of that the new impellers are sharpened in a brand new way, thanks to which they have a considerably sharper profile than other known products. The new impellers come in various versions – with 7, 8 or 9 teeth. Of course, we still produce the 8-tooth impeller with a traditional pattern and deeper grooves for easier fat removal.

3272-00026500 Impeller T6, milk white, 12 teeth, coarse males, Shore 88

3272-00026501 Impeller T6, turquoise, 12 teeth, normal males/coarse females. Shore 84

3272-00026502 Impeller T6, blue, 12 teeth, normal females/fine males. Shore 82

3272-00026503 Impeller T6, yellow, 12 teeth, fine males. Shore 78/80

3272-00026504 Impeller T6, black, 12 teeth, very delicate skins. Shore 70

3272-00026320 Impeller, turquoise , 7-tooth wave, displaced blade. Shore 84

3272-00026321 Impeller, blue, 7-tooth wave, displaced blade. Shore 82

3272-00026378 Impeller, blue, 7-tooth wave, for front paws. Shore 82

3272-00026380 Impeller, turquoise, 7-tooth wave, for front paws. Shore 84

3272-00026335 Impeller, turquoise, 8-tooth wave, displaced blade. Shore 84

3272-00026336 Impeller, blue, 8-tooth wave, displaced blade. Shore 82

3272-00026337 Impeller, blue, 8 teeth, even. Shore 82

3272-00026338 Impeller, turquoise, 8 teeth, even. Shore 84

3272-00026379 Impeller, yellow, 8 teeth, V-shaped, 155 mm normal. Shore 78/80

3272-00026381 Impeller, green, 8 teeth, V-shaped, 155 mm. Shore 82

3272-00026382 Impeller, green, 9 teeth, small, for front paws. Shore 82

3272-00026383 Impeller, yellow, 9 teeth, small, for front paws. Shore 78/80.

57www.jasopels.com

Pelting machines

Impellers and spare parts

5110-00031058 3285-00028980

5110-0003628755110-000260005290-23072715 5110-00022445

Chain bracket for sleigh Spare parts kit for Fleshing Automat

Shock absorber for Fleshing AutomatScraping motor 3 kW

5290-23005002Water nozzle for Beam Washer

Air nozzle for Beam Washer Rubber blocks for Skin Remover

5912-32040050Cylinder VDMA Ø40*050

3272-00035050Beam for T3 XL (THIN) Complete A

3272-00024090Rubber scraper plate 5x40x180

3272-00022420Rubber for washer (grinded, green set)

3272-00021217Beam scraper, rubber, horizontal, 75 mm, Green A

3272-00021231 3272-00025947Rubber skin remover, long A Rubber for fat suction with mounting plates, yellow set

3272-00025946Rubber for fat suction, yellow set

5110-00024096Tensile spring, 95 mm, Skin Remover

5110-00024095Tensile spring, 105 mm, Skin Remover

5110-00022430 3272-00024089Horizontal fat scraper with steel core Rubber for skin scraper, green set

3272-00021209Rubber for beam, 65 and 75 mm, complete green set

3272-00021220Rubber for sawdust automat

3272-00021208Rubber for beam, 65 and 75 mm, complete yellow set

3272-00021223Rubber for sawdust automat

3272-00021211Beam scraper, rubber, horizontal, 75 mm, Yellow A

58www.jasopels.com

Pelting machines

Impellers / Spare parts

3010-01002 Jasopels sawdust, type 50 mix, 20 kg bag *

3010-01005 Jasopels sawdust, type 60 fine, 20 kg bag *


Jasopels sawdust for a competitive price


Mink breeder Freddy Christiansen, who has a farm at Præstbro outside Dronninglund, has used Jasopels sawdust for a number of years. He also went through a period when he purchased from another supplier but he has returned to Jasopels.

"I think that Jasopels’ sawdust is a good product for a competitive price. It is a little cheaper, and the quality is right. We have used about six pallets of sawdust and we have not had problems with dust or color transfer in the case of bright skins, so I am very pleased”, says Freddy Christiansen.

Jasopels produces two types of sawdust, 50 mix and 60 fine. Both types are available in convenient 20 kg bags.

"I use the fine kind for everything – this way I don’t worry

about keeping the two kinds separated and not mixing them by mistake. I find Jasopels sawdust easy to work with and we have been very pleased with the results of our pelting work so we definitely aren’t planning to change our sawdust supplier“, says Freddy Christiansen.

Jasopels’ sawdust is produced in Germany, in a new production plant that was opened in 2011.

Production is under constant control in order to ensure that the quality is always the best. Jasopels recommends that you acclimatize the sawdust by letting it sit for a few days in the room where it is to be used so that it reaches room temperature. Performance is best at around 20-22 degrees, which is when the absorbency is optimal. You can also use a sawdust heater, thus optimizing the sawdust’s ability to clean and absorb fat.

Jasopels sawdust

A new, improved sawdust productNew, state-of-the-art production facility opened in January 201120 kg bags – easy to handleAvailable in two kinds: 50 mix and 60 fineDelivered on pallets with 36 bags each

Buy now and get a substantial discount.

59www.jasopels.com

Pelting machines


Søren Buhl’s ambition level is very high and you can feel his enthusiasm the moment you start talking to him. Søren and his wife, Michelle, have been thinking of starting their own pelting center to go along with their farm. Most of all fac-tors it is the economy that matters for a young married cou-ple with two small children and lots of plans for their farm outside Ulfborg.

But the decision has been made and the machines have been bought. After that there was no doubt that the young couple also needed to take part in one of Jasopels’ training programs in Frederikshavn in order to get to know the machines as well as possible in order to achieve the best results.

“Taking part in the training also meant that we met many other mink breeders, talked to them and exchanged tips and tricks,” says Søren Buhl. “We would like to emphasize that the training was worth all the money and thanks to taking part in it we are not afraid to test different settings. We also know what the machines can do and what maintenance and repara-tions they require in order to perform as they are expected to,” says Søren Buhl.

His wife, Michelle, adds: “We were very sceptical before we decided to get our own pelting center and invest in all the ma-chines and equipment. We were talking about getting 10 kro-ner more for every skin so that it all made sense. But once we got started, it turned out to be a great success and we are now very happy that we actually did it. And there is no doubt that this has also made us set our ambitions for the future even higher.”

“We would like to expand and from this year on I’m not go-ing to skin all the mink myself like I did last year. I am going to be all around to make sure work is flowing as it should and to check if the quality is good enough,” says Søren Buhl.

“We are attending another training session this year and all of our machine operators are coming with us so that they can get some inspiring input before we start working. It gives you a better understanding of the machines, both in theory an in practice. You benefit so much just from exchanging tricks of

the trade with others, but also from taking some of their ad-vice home and making use of it,” says Søren Buhl.

“The training session gave us a good start, even though we had a lot of previous experience from other pelting centers. It was nice to be able to talk about all the different things at home afterwards. It makes us feel calm and confident around our machines and allows us to make plans for the coming pelting season,” says Michelle and adds: “It is nice that our skills overlap and that we can take turns operating different machines. Especially if problems occur and Søren has to take care of them so that there isn’t too much waiting time.”

Among the new machines in the pelting center you can see Jasopels’ new WRAP MaxiStretch.

“This one has become my machine!” says Michelle with a big smile. “It’s been hard for me to step aside and let others use it. I’ve become so familiar with it and it is really easy to use, the skins keep their sizes and our results are really good.”

“We were a little in doubt about the sizes, partly about how big skins we were making and also we didn’t know whether the skins would actually keep the sizes. We talked to Jasopels about it during the pelting season. We always make sure that the foil is wrapped very tightly. After having controlled many of our skins we can say that the sizes are the same and the re-sults are satisfactory,” says Søren Buhl.

“The trick is to fasten the skin properly and make sure that the belly, the back, the rear paws and the tail are placed cor-rectly. Then you need to wrap the foil very tightly so it almost becomes white but doesn’t break. At first we had to wrap some of the skins again, but now work is going much faster and we can even reach 800-1.000 pcs. a day and the skins are all wrapped correctly,” says Michelle.

“Starting our own pelting center has given us a sense of freedom and an opportunity to keep up the good work and make sure that it gets done properly. The quality needs to be top notch and we will definitely continue working to maintain that,” says Søren Buhl.

The plan is to extend the farm already in the next season and the three keywords are: quality, quality and quality. “We must get to the top 50 in order to secure our future in the business,” says Søren Buhl.

Own pelting center gave freedom

and new inspiration

60www.jasopels.com

Pelting machines

Technical data

Air 40 l/min and minimum 8 bar

Electrical connection 230 Volt + PE

Relay Super resistant HPFI


WRAP MaxiStretchCode no. 3230-340015

The fact that over 250 WRAP MaxiStretch machines were sold last season means that over 18 million skins are stretched worldwide using this machine. It also means that breeders’ interest in better stretching is not getting any smaller – on the contrary!

Countless clients have told us that they have achieved better selling prices – partly due to the fact that their skins have actually gotten bigger thanks to WRAP MaxiStretch and partly because of the way the WRAP does not let the skins shrink during the drying process.

“The weakest pelt decides”Not any more – since the introduction of Dynamic force® it is the current pelt that is the starting point instead of a generalized value.

In short words the system works as follows: WRAP MaxiStretch measures the pelt and then digitally sets the machine’s force based on the starting point.

In other words this means that a pelt which is of size 0 before stretching will not be exposed to the same force as a pelt that is of size 2 x 0 – simply be-cause largest pelts are able to endure greater force. What you get is a new sense of certainty that all your pelts have been stretched in an optimal way. On top of that you also get a machine that is faster.

“Stretch’n release”If a pelt cannot be stretched to the next size, there is no point in keeping it stretched to its maximum length. In such cases WRAP MaxiStretch can automat-ically reduce the force, which will allow you to achieve the perfect balance between size and quality.

Switch quickly between your pelt types using 8 different programsDifferentiated wrapping – wraps up only what is needed for current peltsFully programmable stamp-function – you get to choose the amount of force appliedA special gentle function – suitable for damaged peltsThe board’s position can be chosen by the user

Last but not least WRAP MaxiStretch has the lowest running costs on the market.

Price EUR

31.750,00

New



users.

61www.jasopels.com

Pelting machines

3030-01025WRAP foil 50mm

3280-00342010Program update WRAP 2010

3050-01056WRAP knife, blue

5160-00346130Rubber for knife – WRAP 15*25

5160-00349999Multi board for WRAP, without cylinder

5160-00346850Tension roll – green

5160-00346605Wheel with rubber coating

5160-00346136Knife blade for WRAP T4

5923-44003310Photo sensor Omron 25*11*8

5923-44003311Reflective block/tape for 5923-44003310

Spare parts for WRAP machines

Skin Moving System Code no. 3250-901000

Automatically move skins from the fleshing room to a silo placed above the drumMove the skins from the silo under the drum to the stretching room/stretching machineThe automatic control monitors the rest of the procedure after tumbling is finishedMove sawdust from the drum via a buffer silo to the container above the Fleshing AutomatTime-saving, saves up to 75% of expenses connected with the drum operator’s wage

Remember to place your order before 01.08.13 if you want the machine delivered in 2013.

Together with the Self-Emptying Skin Drum the system can carry out the following working processes:

62www.jasopels.com

Pelting machines


Bøgsted Mink near Hjallerup is known as a producer of top class skins.

They have been working with WRAP MaxiStretch for two seasons. Last season they stretched approximately 25.000 skins. The result was top notch – no shrinking after drying and no jaw marks.

This is not what it was like in the beginning. Before the season, the machine’s computer was routinely updated and the jaws for rear paws were replaced with new ones in order to ensure a regular pull on the sides and a perfect stretching result on all skins.

“Right when we started, the machine was pulling the skins too hard, which is why we had Kurt from Jasopels visit us. He adjusted the program so that the machine pulled in smaller intervals but still managed to get the skins stretched to the desired size. I guess you can say that the machine has become a little gentler, especially when it comes to female skins,” says Rasmus Bøgsted, who has stretched all the skins at Bøgsted Mink.

“We have many bright mink skins, which are probably more delicate than the average. This is another reason why we are so happy with our WRAP MaxiStretch, as it can show consideration for all types of skins and stretch them according to their needs. It is incredibly stable and does some real quality work. It is also user-friendly,” says Rasmus Bøgsted.

“The advantage of having WRAP MaxiStretch is that we get to decide about the result, not the machine. It is very easy to switch it from one type of skin to another using the pre-programmed control system, and it contributes greatly to our pelting center’s good results,” says Rasmus Bøgsted.

Rasmus Bøgsted is a third generation mink farmer. His grandfather started with 56 females in the 1960s. His ambitions and results speak for themselves. Achieving the best results requires hard work, which is why the same is required of the machines. They are supposed to help achieve the best results – otherwise they shouldn’t even be there!

“I have chosen to stretch all the skins myself because it is a vital stage of the entire production process. Here I am able to control the outcome of all the remaining stages and I must say that it is very seldom that I come across errors. It is not about going through a huge number of skins but about getting the best possible quality. Therefore, we must spend the time that it takes in order to achieve it,” says Rasmus Bøgsted.

At Bøgsted Mink the skins are refrigerated for 1,5 hours before they get stretched so that they get a little bit moist. Thanks to this the skins become slightly more flexible, which the stretching machine can make use of.

“The good thing about WRAP MaxiStretch is that we can set it the way we want to. The machine works very precisely and this is why we get very close to what is optimal. The wrap leaves no marks and thanks to that we achieve very satisfactory results,” concludes Rasmus Bøgsted.

WRAP MaxiStretch guarantees the optimal result

63www.jasopels.com

Pelting machines

Jasopels MAXI Trolley

Code no. 3450-2777Jasopels MAXI Trolley

with blower, excl. timer, price EUR

1.285,00

MAXI drying box for up to 200 boardsAll boards can be used in the MAXI TrolleyRotating wheels in each cornerCan be supplied with blowers in the drying boxCan be connected to an existing drying installationDrying time up to 50 % shorter with MAXI boardsAdapted to automatic skin removalEasy to operateCan be cleaned with a high pressure cleaner

Automatic MAXI Round PlateCode no. 3450-27755

Price EUR

2.710,00Place the board in the round plate and move it to the stretch-ing machine.

64www.jasopels.com

Pelting machines

Technical data


Technical data


Jasopels Skin Remover

Code no. 3330-1100

Skin loosenerCode no. 3330-1099

The Jasopels Automatic Skin Remover re-moves pelts from boards after drying on a Jasopels MAXI Trolley or another drying box.

Place the Jasopels MAXI Trolley or the drying box in the Skin Remover. When you start the Remover, the MAXI Trolley or the drying box will be moved forward automatically until all skins have been re-moved and the MAXI Trolley or the drying box is ready to be used again. The skins that have been removed from the boards are placed on a table.

Price EUR

21.610,00Operated by one personCapacity of approx. 200 skins per 20 minutesCan be placed directly in the drying roomEasy removalRemoves four skins at a time

Price EUR

18.905,00

Place the Jasopels MAXI Trolley or a drying box in the Skin LoosenerThe Skin Loosener loosens skins from boards after drying on a Jasopels MAXI Trolley and other drying boxes.

65www.jasopels.com

Pelting machines

Technical data

Dimensions L: 160 cm H: 220 cm D: 50 cm

Electrical connection 3 x 400 Volt + 0 + PE

Air Minimum 8 bar

Price EUR

10.800,00

Jasopels Skin Remover SnapMax Code no. 3330-1098

No more awkward lifting and strains while loosening skins from boards!

With SnapMax you only need to control the pro-cess. The hard work of loosening the skins is conducted in a safe and dependable manner.

The strong jaws and a powerful lifting en-gine let you save your energy for other tasks. The SnapMax Skin Remover works with Maxi and Fix2 boards.

In simple words: you just lower the remover’s head over the board and the rest happens auto-matically. We call this simplicity!

66www.jasopels.com

Pelting machines

Super quality paper.Individual solutions with larger orders.

The Jasopels sleeves are of great quality and they are available in several lengths, which makes it easy to find a sleeve that suits your individual needs.

The most expanding board on the market that makes the skin easier to remove after drying.

3030-01011 Jasopels sleeves, male, 95 cm, 2010 á 500 pcs.

3030-01016 Jasopels sleeves, female, 81 cm, 2010 á 500 pcs.

3030-01017 Jasopels sleeves, male, for Wrap 42 cm, á 1000 pcs.

3030-01018 Jasopels sleeves, female, for Wrap 42 cm, á 1000 pcs.


3020-0121011 Easy Off Board, male *

3020-0121012 Easy Off Board, female *


Sleeves

Easy Off Boards

New

67www.jasopels.com

Pelting machines

Air intake

3410-82004100 Q-VEX Fridge, 2,5 kW 3.370,00

3410-82004125 Q-VEX Fridge, 5 kW 4.040,00

Code no. Product Price

Technical data

Dimensions W: 60 cm H: 183 cm D: 60 cm

Air quantity 16.060 m3/hour

Heating element 9 kW

Weight 125 kg

Electrical connection 400 Volt, 16 Amp

Waterworks water Normal

Compressed air: Minimum 5 atm

Q-VEX ClimaCode no. 3410-82002000

Q-VEX Fridge

Jasopels Storage Unit

Humidity UnitCode no. 3440-0500

Price excl. installation Euro.

10.125,00

Code no. 3420-84000500Until 120 cubic meters, excl. installation, Euro.

13.500,00Code no. 3420-84000600Until 240 cubic meters, excl. installation, Euro.

17.560,00

Humidity unit for storage and drying room, with hygrostat. Very efficient, with 2 nozzles.

Price excl. installation Euro.

2.560,00

The Jasopels Storage Unit is designed to be installed in the storage room. It maintains a temperature of between 10 and 12oC and a humidity of 75-80%.

The unit consists of a fan, a cooling unit, a humidity unit, sensors and an electronic control unit.

68www.jasopels.com

Pelting machines

For precise control of humidity and temperature in the drying room, especially with MAXI TrolleyOptimal humidity and temperature controlThe machine will make sure the skins are dried correctlyBuilt-in hygrostat and thermostat, humidity unit and heating unitEasy installation – all in one unitThe machine only requires the connection of electrical power, water, a ventilation pipe and compressed air

5250-1210400 Kongskilde suction fan 4,0 kW, 400 vac, 50 Hz 1.345,00

5250-1210600 Kongskilde suction fan 5,5 kW, 400 vac, 50 Hz 1.879,00

3230-540401 Pipe set and Kongskilde suction fan 4,0 kW 2.710,00

3230-540402 Pipe set, cyclone and Kongskilde suction fan 4,0 kW 3.365,00

3275-529000 Brush 10,15

Code no. Product description PriceTechnical data




Skin Cleaning Automat T5Code no. 3230-540001

The Cleaning Automat cleans the skins, softens them and makes them ready for delivery. The wool and hair are cleaned and get a “lift”.

The remaining sawdust is loosened and removed from the skin. The blowing system then blows air inside the skin so that the leftover sawdust and dust is removed, all in one complete cycle.

With its high capacity and built-in vacuum suction unit, this machine is a real time saver and skin improver. The Skin Cleaning Automat gives the skin the optimal look.

The Skin Cleaning Automat T5 is 20 cm bigger. There are now 2 skin holders instead of 1, which increases the speed.

A suction unit that removes sawdust and dust directly to the container needs to be installed. Price EUR

17.560,00excl. suction device, cyclone and installation

New

69www.jasopels.com

Pelting machines

5190-00521010 1 Toothed belt, double, 815 mm 41,80

3275-529000 2 Brush, 1 pc. 10,15


Technical data

Technical data





21

3275-529000Brush

5190-00521010Toothed belt, double, 815 mm

5090-1532100Skin holder

Skin Cleaner T3Code no. 3230-522000

Soft BrushCode no. 3140-1740039999

Thanks to using three brushes, one on the top side and two at the bottom, this machine does a very good job removing small pieces of loose dirt from the pelt and softening it.

Price EUR

1.350,00

Price EUR

8.095,00

Cleans and softens the skinWool and hair get a “lift”Gives the skins the optimal look and prepares them for deliveryA suction unit that removes sawdust and dust from the skin can be installed

70www.jasopels.com

Pelting machines

Technical data

Technical data

Air: 0-10 bar


Air consumption 0,75 l/min – 8 bar


Label MachineCode no. 3232-620001

Quick Softer 4M AutomatikCode no. 3140-174004001

The Quick Softer 4M is a machine with a great capacity. The machine softens the skin after drying. The skin is placed on the ma-chine manually, after which the Quick Softer pulls the skin through a set of rolls that sof-ten the skin on the leather side.

Price EUR

1.900,00New, improved Quick SofterAutomatic processingMoulded reelsExtra strong pistonSkins are blown through

This machine’s construction is based on the same principle as that of the T2 Label Machine. The MB Label Machine has a label magazine that can use all types of labels.

Price EUR

3.365,00

71www.jasopels.com

Pelting machines

4 5 6

3

15

2

14

1

13

10 11 12

987


3050-01611 1 Handle, Gillette no. 4 9,20

3050-01060 2 Knife blade, Paragon no. 23, small 0,40

3050-01050 3 Knife, Dick model 2259-6 13,30

3050-01051 4 Knife, Dick model 4070-4 13,40

3050-01110 5 Paw scissors, Freunde 33,10

3050-01115 6 Paw scissors SX 10 58,15

3050-011150 7 Cutting edge for scissors SX 10 33,65

3050-011151 8 Stopper for SX 10, nylon 3,18

3050-01071 9 Manual flesher with two handles 100,00

3050-010750 10 Knife f/tail flesher with counterweight, 5 pcs. 6,70

3050-01080 11 Rapid steel action 94,20

3050-01082 12 Knife sharpener std. 23,65

1260-03101 13 Grading trap, stainless steel, male, XL 75,00

1260-03103 Grading trap, stainless steel, female *

1260-01103 14 Moving trap, 5 x 5, with new locking fastenings 20,00

1260-02102 15 Catching trap, wire, 1 x 1 18,20

1260-10102 16 Catching net with steel frame 63,40

1260-11101 17 Catching tong/pliers, female 57,00

1261-13101 Farm rake, 16 teeth, width: 60 cm 38,95

1261-13102 18 Farm rake, Galax, 15 teeth, adjustable 46,60

3050-011500 19 Plastic bag, clear, 60 x 120 super strong 0,75

3391-1201 20 Impeller 100 mm 65,55

3391-1200 21 Impeller, 100 mm, hard, yellow *

3391-1105 22 Tail clamp for fleshing machine *

3391-1250 23 Paw hook for Rotomax and Jasop *

3391-1108 24 String for fleshing machine *

3330-10010 25 Vacuum suction device, 2BH1600-7AH16, 3 kW

For rotating fleshing machine 1.610,00

3393-1000 26 Bucket holder with 3 wheels 270,00

212019

181716

242322 25 26

Farm articles

For feed distribution etc.

72www.jasopels.com

Farm articles

3070-02002 1 Skin tagging gun, economic 26,35

3070-020020 2 Needle for skin tagging gun 6,45

3070-020021 3 Skin tags, 13 mm, for Mark II, 1000 pcs. 8,90


321



4

4

5

5 6

6

3

3

2

2

1

1

3070-01040 1 Vaccination gun, Shooter 2 ml 24,20

3070-01045 2 Cylinder and gasket for Shooter 8,80

3070-01046 3 Bottle holder for Shooter 13,40

3070-01043 4 Tube system and bottle holder 10,15

3070-01044 5 Quick lock (metal) 4,75

1260-11150 6 Nail scissors, model 7803 25,00

1210-03101 1 Permaforte, 10 l 267,00

1210-03100 2 Bioinsect, 750 ml 23,65

1210-02101 3 Dimethoat, 5 l 111,50

1210-01100 4 Loppex, 5 kg 107,75

1210-01102 5 Dimilin, 5 kg 193,60

1211-011041 6 Fly poison, Agita, 400 g 79,60

1251-01280 1 Garbage bags, black 2,05

3070-02040 2 Stackable packaging box, white 25,00

1261-10001 3 Scales, without holder, 0-30 kg 506,00

1231-02114 4 Cage numbers with bar code, 50 pcs. per sheet 9,20

1230-01224 5 Breeding cards, male, 1 year 0,10

1230-01204 6 Breeding cards, female, 1 year 0,10

1230-01252 7 Cards for puppies 0,10

1230-01210 8 Breeding cards, 4 years 0,10

1261-12101 9 Feeding spoon 32,30

Code no. Product description Price321

654

987

Skin tagging

Vaccination

Flea poison

Farm articles

73www.jasopels.com

Farm articles


1240-01004 1 Glove, no. 178, right 33,65

1240-010040 Glove, no. 178, left 33,65

1240-01005 2 Glove, no. 178, right, women’s 33,65

1240-010050 Glove, no. 178, left, women’s 33,65

1240-01006 3 Glove, no. 179, right 40,45

1240-010060 Glove, no. 179, left 40,45

1240-01007 4 Glove, no. 179, xx large, right 49,35

1240-010070 Glove, no. 179, xx large, left 49,35

1240-01001 5 Glove, no. 183, right 21,90

1240-010010 Glove, no. 183, left 21,90

1240-01002 6 Glove, no. 185, right 50,70

1240-010020 Glove, no. 185, left 50,70

1240-01008 7 Glove, no. 562, right 21,65

1240-010080 Glove, no. 562, left 21,65

1240-01010 8 Glove, no. 563, right 31,10

1240-010100 Glove, no. 563, left 31,10

1240-01051 9 Welding glove, 5 fingers, no. 663 7,30

1240-02027 10 Working glove, Europa 8,40

1240-02052 11 Glove, nylon with dots 1,25

1240-02042 12 Working glove, Classic artic 16,90

1240-01016 13 Ninja Star 5, cut resistant glove 30,45

1240-01015 14 Ninja HPT glove CE-11 3,40

1242-01501 15 Disposable shoes 13,00

654

321

121110

987

14 1513

Gloves

74www.jasopels.com

Farm articles

Unless any other written agreement is made, the following sales and delivery terms conditions are effective for all arrangements and deliveries from Jasopels Ltd. Delivery and Supplies:Supplies are ex-factory unless other specific arrangements are agreed upon. Delays:The agreement can be cancelled and refusal of compensations from Jasopels Ltd.Delays from our sub-constructors cannot be hold responsible for compensation and therefore can Jasopels Ltd. refuse compensation regarding delays.Jasopels Ltd. is not responsible in any case regarding operating losses, time loss, profit loss or other indirect loss, and customers day fines. Payments:The buyer must pay the amount that is written on the invoice and obligations and other arranged payment conditions.If payments are not met on the date the payments are requested, the supplier has the right to add interest to the amount from the date the invoice is due for payment - the interest is 2% at the beginning of the month together with a reminder letter. Ownership:The ownership of the goods is Jasopels ltd. Customer ownership is only legal when goods are paid for in full and the amount received. Venue & Laws:Any disputes between partners will be decided at the ordinary courts and the use of Danish law and courts. As a rule, the court in Varde Denmark where decisions will be made. Responsibility for deficiency:Jasopels Ltd is bound to help in cases of delivered goods and parts where there is fault in materials and ore production mistakes. The buyer has the right to complain as in the conditions stated below.

Complaints and examination of the goods:The buyer must, as soon as the goods are delivered and received, make sure that the goods are in good order and condition and the number of articles ordered are of the correct number and that the contract is complete upon delivery.

The customer is obligated without delays and no later than 8 days after receipt of goods to give notice of shortages that may have occurred.The buyer cannot later on plead shortages after the 8 days on delivery of goods.Complaints and shortages must be send to Jasopels Ltd. by letter immediately. Complaints and shortages must always occure not later than 6 month after deliveries. Later the buyer will loose the rights to the objection. The return of defective goods can only be returned by arrangement with the supplier.The returned goods transport is paid by the customer and at the customer risk. Unless there is an alternative written arrangement. Free from responsibility:Jasopels Ltd. is not responsible alone for the damage caused or delivery services as long as it is proven. Jasopels Ltd has no responsibility for indirect damage and losses as well as operating losses, time loss, profit loss etc. Jasopels ltd. is not responsible for shortages or delays or fulfilment of orders because of force majeure war, riots, government measures, strikes, lock out, export or forbidden imports, shortages from our suppliers, or any other case which lies out of Jasopels Ltd. power and control, which would make deliveries late or hinder manufacturing or delivery of Jasopels Ltd. services.

Jasopels A/S takes reservations for misprints, price changes and discontinued products.

TERMS AND CONDITIONS:

75www.jasopels.com

Farm articles

World Wide Agents

Springbrook Fur Farm Limited1561 Berlett’s Road, St. Agatha, Ontario, N0B 2L0, CanadaPhone: + 1 519 885 0970Fax: + 1 519 885 2373E-mail: [email protected]

Flevo Farm ServiceNijverheidsweg 83881 LA Putten, HollandPhone: + 31 341 369 850Fax: + 31 341 369 855E-mail: [email protected]

MINKOMAT ABGottåkravägen 14B23641 Höllviken, SwedenPhone: + 46 404 50320Mob: + 46 706 004 800E-mail: [email protected]

Ert EelmetsErtel.ee OÜVääna 7-1811612 Tallinn, EstoniaMob: +37 250 316 42Fax: +37 253 071 537E-mail: [email protected], [email protected]: ert.eelmets

Jasopels Sp. z o.o.ul. Koscielna 2662-001 Chludowo, PolandPhone: + 48 61 855 2776Fax: + 48 61 811 7610E-mail: [email protected]

SAVIDi Pozza Luciano & C. Snc - societá agricolaVia Ciompo 636062 Vicenza, ItalyPhone: + 39 042 470 0379Fax: + 39 042 470 0379Mob: + 39 339 755 7356E-mail: [email protected]

Einar Johan SirevagHavraskaret 174364 Sirevag, NorwayPhone: + 47 909 652 01Fax: + 47 514 366 36E-mail: [email protected]

UAB Zverininkystes IrangaZalioji str. 10Kretingale, Kleipedos r.LT - 96044 LithuaniaMob: +37 061 254 601Fax: +37 046 446 757E-mail: [email protected], [email protected]

Katrin & Stefan GudmundssonÁsaskóli 801 Selfoss, IslandPhone: + 354 865 8776E-mail: [email protected]

Nikolaos dim. KafasisThoma Tsipou str. 3450300 Siatista, Kozani, GreecePhone: +30 694 793 3813Phone: +30 694 484 1599E-mail: [email protected]

Fabriksvej 19DK-7441 Bording, Denmark

Phone: +45 89 20 61 88Mobile: +48 509 161 333Fax: +45 89 20 61 87 Webpage: www.jasopels.com

Monday - Thursday 8.00 - 16.00 CETFriday 8.00 - 14.00 CET

Bank:Danske Bank, Prinsensgade 11, DK-9000 Aalborg, DenmarkSWIFT: DABADKKKIBAN: DK7030003201396719

Jasopels International Address

76www.jasopels.com

Contacts

76












15

54

32

63

47

24

3 The times are favorable5 Wire6 Breeding boxes10 Mountings, fittings and clips13 Mink sheds20 Water equipment21 Manure systems22 Service and Spare part kits23 Farm Manager 24 Article with Burmølle Mink26 Soffie feeding machines29 Spare parts for feeding machines30 Article with Villy Hestbech31 Feed silos32 Training33 Article with Freddy Christiansen 35 Jasopels Drums40 Slicing Machine T3 XL41 Skinning Machine T1144 Jasopels MaxiHook

45 Article with Hundebøl Mink47 Jasopels Pelting Robot XXL49 Article with Jens Christian Thomsen50 Jasopels Fleshing Automat T652 Jasopels Fleshing Automat T4/T554 Article with John Lykke56 Article with Søren Hansen57 Impellers60 Article with Søren Buhl61 WRAP MaxiStretch63 Article with Rasmus Bøgsted64 Jasopels Maxi Trolley66 Jasopels Skin Remover SnapMax 67 Sleeves and boards69 Skin Cleaning Automat T572 Farm articles76 World Wide Agents78 Contacts

Palle HansenSales consultant


2

Content Contacts

78www.jasopels.com www.jasopels.com

Tommy [email protected]

Export sales +45 98 42 05 66

Export sales +45 98 42 05 66

Logistics+45 98 42 05 66

Technical supervisors +45 98 42 05 66

Casper SpannerManager / Polen +48 502202909

[email protected]

Mogens KristensenSales consultant


Brian SkødebergNielsen

Sales consultant+45 30172806

[email protected]

Dennis Daa JensenService Manager


Kim DahlService

Technical [email protected]

Morten [email protected]

Poul BachCEO Jasopels A/S


Bronek GutowskiSales consultant +48 502202404

[email protected]

Kasia MatysiakOffice manager+ 48 509161333

[email protected]

Justyna UrbanowiczOffice assistant+48 517750512

[email protected]

Administration +45 89 20 61 88

Jakub SkikiewiczSales consultant


Børge VindSales consultant

+45 30172805 [email protected]

JasopelsCatalogue 2013



Design/produktion: w

ww

.rosendahls.dk

Fabriksvej 19, 7441 Bording, DenmarkPhone +45 98 42 05 66

[email protected]

Jasopels product catalogue 2013

Documents

Transcript of Jasopels product catalogue 2013