January - 2007 Contact details Company:IDEKO S. Coop. Address:Arriaga Kalea, 2 Location:Elgoibar,...
6
January - 2007 Contact details Company: IDEKO S. Coop. Address: Arriaga Kalea, 2 Location: Elgoibar, 20870 SPAIN Tel. +34 943 74 80 00 Fax: +34 943 74 38 04 Presenter: Joseba Perez Bilbatua Position: International R&D Projects Director Tel. +34 943 74 80 00 Fax: +34 943 74 38 04 Email: [email protected] Page 1
-
Upload
jett-sellon -
Category
Documents
-
view
215 -
download
0
Transcript of January - 2007 Contact details Company:IDEKO S. Coop. Address:Arriaga Kalea, 2 Location:Elgoibar,...
January - 2007
Contact details
Company: IDEKO S. Coop.
Address: Arriaga Kalea, 2
Location: Elgoibar, 20870 SPAIN
Tel. +34 943 74 80 00
Fax: +34 943 74 38 04
Presenter: Joseba Perez Bilbatua
Position: International R&D Projects Director
Tel. +34 943 74 80 00
Fax: +34 943 74 38 04
Email: [email protected]
Page 1
January - 2007
Previous experience within FP5 and FP6
• 32 European funded projects, 8 of them in FP6 and 14 co-ordinated by IDEKO
– LAUNCH MICRO: MicroTechnologies for Re-launching European Machine Manufacturing SMEs
– NEXT: New and user-friendly production technologies, and their incorporation into the factory of the future
– MANUDIRECT: Direct Ultra-precision Manufacturing– PROLIMA: Environmental Product Lifecycle Management for building– MAGFORGE: Magnesium Forged Components for Structural Lightweight Transport
Applications– KNOWEDM: Automated Knowledge based EDM technology for integrated tool making and
high precision components– HYMOULD: Development of a Hybrid Machine Tool Concept for Manufacturing of Free-Form
Surface Moulds SAPIENT: Synergetic Process Integration for Efficient Micro and Nano Manufacture
IP
SMEs
CA
– SEPMAC: Sustainable and economic production of magnesium components– ENGY: Development of low energy and eco-efficient grinding technologies– SMARTOOL: Smart structures for machine tools – PRIMA: Improving performance and life-cycle cost of Machine Tools through
Advanced Materials– AMADEUS: Reduction of manual finishing by automated manufacturing of dies
and moulds– NOISELESS: Reduction of noise emission on machine tools
FP5
Page 2
January - 2007
First Choice Topic
Nanotechnology, Materials, Production Technologies, Call 1
Advanced Wood-Based Composites and their Production
Ecological and safe machining of wood-based composites. A promising and innovative technology in terms of :
Safety, Operator's health, Tool life increment, Parts cleanliness, Machine performance, Machine and fixturing maintenance,
etc...
Page 3
January - 2007
Key Competencies and skills (I)
SEPMAC Project (FP5): Development of a New Integrated System for Ecological High Speed Machining using Internal Chip Evacuation.
Project Goal: Full chip removal through tool and spindle, elimination of chips from working space
Advantages of the new technology:
Safe and clean working area. No operator’s health hazard. Clean and dry workpieces, do not
require further cleaning. Immediate chip processing. Flexible machining / less tools
required. Compatible with tool-shank
standards (HSK, ISO). Simple- do not require additional
devices.
The promising results encouraged the research group to explore new materials and applications
Page 4
January - 2007
Key Competencies and skills (II)
Page 5
New Materials:
— Interested aerospace companies (AIRBUS, EADS, GAMESA, CASA) for applying this technology on CFRCs materials.
— Mould makers interested on production electrodes made in Graphite.— First successful trials made on machining Wood.
Without aspiration With aspiration
January - 2007
Key Competencies and skills (II)
New Materials:
— Interested aerospace companies (AIRBUS, EADS, GAMESA, CASA) for applying this technology on CFRCs materials.
— Mould makers interested on production electrodes made in Graphite.— Successful trials made on machining Wood.
Page 5
Without aspiration With aspiration
