ITI LED LIGHT BOX User Manual - Imatest · 2020. 4. 21. · ITI LED Lighting Box can generate...
Transcript of ITI LED LIGHT BOX User Manual - Imatest · 2020. 4. 21. · ITI LED Lighting Box can generate...
ITI LED LIGHTING BOX SW ManualModel : ITLB-CUS-V2
ITI LED LIGHT BOX User Manual
Contents1. ITI LED Box Specification
2. SW INSTALLATION
- DEVICE SETTING
- RS232 DRIVER INSTALL
- RS232 & BLUETOOTH CONNECT
· Windows · OSX
3. ITI LED CONTROL PROGRAM
- Windows
- OSX
ITI LED LIGHTING BOX SW ManualModel : ITLB-CUS-V2
1. ITI LED Box Specification
• ITI LED Lighting Box
① Two Light source (Push Switching type)
- 3100 K : ± 100K (100 Lux under : ± 300K )
- 5500 K : ± 100K (100 Lux under : ± 300K )
② High Color rendering index :
- 97 Ra
③ Device Control
- Switch on the device
- ITI LED BOX PC Program (wire & wireless)
(RS232C to USB Interface & Bluetooth Adapter)
④ High brightness and Low brightness
- 10,000 Lux ~30 Lux
⑤ Dimming Level : 2000 step
- 1step & 20 step (Push the digital rotary switch)
⑥ Light uniformity
- 90 % over
⑦ Life time
- 20,000 hour over
⑧ No flicker
- Global shutter & Rolling shutter Free
⑨ Power
- AC 220V 0.5A
⑩ Operating Temperature/Humidity
- 20˚ (±15 ˚) / 50%
⑪ Dimension (mm)
- 650 (W) x 600 (H)
In the spectrum graph, Black Line is the spectrum of sunlight.
ITI LED Lighting Box can generate Spectral Characteristics
in almost every wavelengths of light.
This is superior to other LED devices or fluorescent lightings.
• ITI LED Lighting Box Spectrum
① Color Temperature Convert
- Push Switch (red arrow)
② Dimming Step (1 & 20 step)
- Push the digital rotary
Switch (red arrow)
3100K
5500K
1. ITI LED Box Specification
2. INSTALLATION- DEVICE SETTING
Figure(1) : Installing USB cable
Install USB cable or Bluetooth Adapter on LED box.
• Note: When you install the Bluetooth adapter, you should choose the Dipswitch on “DTE”.
Figure(2) : Dipswitch on “DTE”
** Note : When you do not use the Bluetooth function, you have to remove the Bluetooth module. Otherwise, flicker may occur.
- RS232 DRIVER INSTALLATION
RS232C Driver Download Link
https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
Download & install the driver which is tailored for your computer's operating system.
2. INSTALLATION
2. INSTALLATION- Windows RS232 CONNECT
Step 1 _ Install the driver on your PC. ( Double click on installer file which are suitable for your PC.)
Windows PC _ RS232 Connect
Step 2 _ Please check whether USB(Silicon Labs CP210x USB to UART Bridge) is generated on the port of Device Manager.
2. INSTALLATION- Windows BLUETOOTH CONNECT
Step 1 _ Choose “Add a Device” on the path ;Control panel>All Control Panel Items>Devices and Printers. Choose the “ITILEDBT” and click “Next”.
Windows PC _ BLUETOOTH
Step 2 _ Choose “Enter the device’s pairing code” , and click “Next”.
2. INSTALLATION
Step 3 _ Please Enter the Secret Code and click “Next”. * Secret Code : 1234
Windows PC _ BLUETOOTH
Step 4 _ The process of adding device is complete.
- Windows BLUETOOTH CONNECT
2. INSTALLATION
Step 5 _ Please check the connected COM port number.
Windows PC _ BLUETOOTH
Step 6 _ Run the LED BOX Control program and choose the right COM port , then Connect !!
- Windows BLUETOOTH CONNECT
2. INSTALLATION- OSX RS232 CONNECT
Step 1 _ Run “dmg file” , then the Silicon Labs App will be extracted .Step 2 _ Run the extracted Silicon Labs App.
OSX _ RS232 Connect
Step 3 _ After running Silicon Labs App, a folder like below image will be generated. Then please run “pkg” file.
7
2. INSTALLATION
Step 4 _ Run “pkg” file, then driver will be installed. Click “ Continue”
OSX _ RS232 Connect
Step 5 _ Choose language and click “Continue”.
- OSX RS232 CONNECT
2. INSTALLATION
Step 6 _ Click “Agree”
OSX _ RS232 Connect
Step 7 _ Click “Install”
- OSX RS232 CONNECT
2. INSTALLATION
Step 8 _ Installiation is finished.
OSX _ RS232 Connect
Step 9 _ Connect SLAB_USBtoUART
- OSX RS232 CONNECT
2. INSTALLATION
Step 1 _ Run Bluetooth in System Preferences.
OSX _ BLUETOOTH
Step 2 _ ITILEDBT Device will be detected. Click “Pair”.
- OSX BLUETOOTH CONNECT
2. INSTALLATION
Step 3 _ Click “Options”
OSX _ BLUETOOTH
Step 4 _ Please Enter the Secret Code * Secret Code : 1234
- OSX BLUETOOTH CONNECT
Step 5 _ You have successfully completed the Connection.
OSX _ BLUETOOTH
Step 6 _ Choose “ITILEDBT-DevB” and connect, then you can operate LED box with Control Program.
2. INSTALLATION- OSX BLUETOOTH CONNECT
3. ITI LED CONTROL PROGRAM- Windows
Windows
Name : Enter the file name when you save the current settings .
Port & Connect : Choose and connect the right port for LED box connecting. Port name, refer to “Windows BLUETOOTH CONNECTING”
Color Temperature : Choose the color temperature with dropdown menu.
Power On Off : LED Box On or Off
Dimming Step : You can choose the step of dimming, min is 1, max is 2,000
Send : Execute the current settings
Read : Read the current settings
Save : Save the current settings on data list.Delete : Delete saved setting on Data listNew File : When you click this button , the whole Data list is deleted. File Load : Load saved date list.File Save : Save current Data list as one file.
3. ITI LED CONTROL PROGRAM- OSX
OSX
Name : Enter the file name when you save the current settings .
Port & Connect : Choose and connect the right port for LED box connecting. Port name, refer to “OSX BLUETOOTH CONNECTING”
Color Temperature : Choose the color temperature with dropdown menu.
Power On Off : LED Box On or Off
Dimming Step : You can choose the step of dimming, min is 1, max is 2,000
Send : Execute the current settings
Read : Read the current settings
Save : Save the current settings on data list.Delete : Delete saved setting on Data listNew File : When you click this button , the whole Data list is deleted. File Load : Load saved date list.File Save : Save current Data list as one file.
Imaging Tech Innovation201, 84, Gaepo-ro 22-gil, Gangnam-gu,
Seoul, Korea (06314)
+82-70-4354-7251
Thank you!
If you have any other questions or need to technical support, Please contact at the number below.