ISSUE Fixed Network Curriculum Development Section MA5600 Multi-Service Access Module Operation and...
-
Upload
tommy-wassell -
Category
Documents
-
view
227 -
download
3
Transcript of ISSUE Fixed Network Curriculum Development Section MA5600 Multi-Service Access Module Operation and...
ISSUEISSUE
Fixed Network Curriculum
Development Section
Fixed Network Curriculum
Development Section
MA5600 Multi-Service Access Module Operation and Maintenance
MA5600 Multi-Service Access Module Operation and Maintenance
1.01.0
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Objectives Objectives
Grasp the basic knowledge of command line
Grasp the basic system configuration
Grasp the basic service and function
configuration
Upon completion of this course, you will be able
to:
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Contents Contents
1 Introduction to Command Line Operations
2 Basic System Configuration
3 Port Configuration
4 VLAN Service Configuration
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Command Line Basis Command Line Basis
MA5600 >
Login via serial port
or TELNET
Privilege user mode
MA5600 #
OSPF mode
MA5600(config-ospf)#
RIP modeMA5600(config-rip)#
interface configuration modeMA5600(config-if-…)#
MA5600(config-test)#
enable
disable
Configure
return
ospf
rip
test
quit
quit
Diagnose mode
MA5600(config-diagnose)#
interface
diagnose
MA5600 command line mode
Ordinary user mode
Global configuration mode
TEST mode
MA5600(config)#
MA5600(config-btv)#
BTVBTV mode
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Command Line Basis Command Line Basis
Command line help
By entering “?” , you can get list of commands with a brief
description under any command mode
MA5600#display?
Key word matching
MA5600#conf<space> ---- MA5600#configure
Chinese/English language switching
MA5600#Switch language mode
Access history commands
Access the previous history command: "Ctrl +P"
Access the next history command: "Ctrl +N"
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Contents Contents
1 Introduction to Command Line Operations
2 Basic System Configuration
3 Port Configuration
4 VLAN Service Configuration
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Setting up Configuration Environment Setting up Configuration Environment
MA5600 control console provides two configuration modes:
Setting up local configuration environment via the Console
Local maintenance
Setting up configuration environment via Telnet
Local and remote maintenance
In-band Telnet: Occupying service channels
Out-band Telnet: Occupying no service channel
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
MA5600
CONETHMON
SCU
AD
EF
Setting up Configuration Environment Setting up Configuration Environment
Setting up a local configuration environment via the Console
Connect the computer serial port with the MA5300 Console via a s
tandard RS232 serial cable, then configure hyper terminal in Wind
ows or other operation systems.
PCRS232 serial port cable
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Open the hyper terminal
Open-Program-Accessories-
Communications-Hyper terminal: Double click
Setting the HyperTerminal parameters
Enter the name: MA5600( The name can be defined by
the user) Connection use: Directly connect to Serial port 1
(depending on actual conditions)
Port setting: 9600bit/s, 8 data bits, no parity check
1 suspension bit, no flow control
Terminal type: VT100 or automatic test
Hypertrm. exe
Setting up Configuration Environment Setting up Configuration Environment
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
MA5600
CONETHMON
SCU
AD
EF
Setting up Configuration Environment Setting up Configuration Environment
server Telnet Terminalworkstation
LAN
workstation
LAN local Telnet mode
Setting up Configuration Environment via Telnet
ETH
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
MA5600
CONETHMON
SCU
AD
EF
Setting up Configuration Environment Setting up Configuration Environment
WAN
LAN
Remote router
Local router
Telnet terminal
LAN
workstation
workstation
WAN remote Telnet configuration mode
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Setting up Configuration Environment Setting up Configuration Environment
User login
Via the Console
After correctly connecting the hyper terminal, press Enter key
according to the prompt to enter the configuration environment
Via Telnet
According to the prompt, enter correct user name and password to
enter the configuration environment
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Basic Maintenance Operations Basic Maintenance Operations
Out-band NM configuration
MA5300(config)#interface meth 0
Enter the external network interface port mode.
MA5300(config-if-meth0)#ip address 10.71.53.2 255.255.255.
0
Configure the IP address of the external network interface
MA5300(config-if-meth0)#undo shutdown
Activate the external network interface
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
In-band NM Configuration ExampleIn-band NM Configuration Example
MA5600SCU
A
F
E
D
MA5200
S
M
B
HRB
Upstream
0
7
FE0/7/0
0
7
HAB
Port ethernet 0/7/0 on the MA5600’s SCU board is connected to port 0 on the MA5200’s HAB board.The IP address of the MA5600 inband NMS is 10.10.20.2/24. The NMS VLAN ID is 1000. The IP address of the NMS is 10.10.21.1/24The IP address of the MA5200’s VT interface is 10.10.20.254/24.The IP address of port 0 of the MA5200 HRB board is 10.10.40.1/30.
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Basic Maintenance Operations Basic Maintenance Operations
In-band NM configuration
MA5600(config)#vlan 1000 mux
Add NM VLAN
MA5600(config)#interface vlan-if 1000
Enter the Vlan-interface 1000 configuration mode .
MA5600(config-if-vlanif1000)#ip address 10.10.20.2 255.255.
255.0
Configure the equipment with a management address, which should
be configured on vlan virtual interface 1000 .
MA5600(config)#port vlan 1000 0/7 0
Add the upstream port
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Basic Maintenance Operations Basic Maintenance Operations
SNMP network management configuration
MA5600(config)# snmp-agent community read public
MA5600(config)# snmp-agent community write private
Set the community name and access authority
MA5600(config)# snmp-agent trap enable
Enable sending Trap
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
MA5600(config)#snmp-agent target-host trap address 10.10.
21.1 securityname private
Set Trap destination address.
MA5600(config)#snmp-agent trap source vlanif 1000
Specify IP address of the inband NMS as the Trap source address.
MA5600(config)#route-static 10.10.41.1 30 10.10.20.254
Configure the equipment with a static route.
MA5600(config)#save
Basic Maintenance Operations Basic Maintenance Operations
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Basic Maintenance Operations Basic Maintenance Operations
Operation terminal configuration
Adding a User MA5600#terminal user name
Deleting a User MA5600#undo terminal user name
Modifying user level MA5600#terminal user level
Modifying user password MA5600#terminal user password
Modifying number re-entries MA5600#terminal user reenter
Viewing User Information MA5600#display terminal user
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Basic Maintenance OperationsBasic Maintenance Operations
Board Management
Query a Board MA5600#display board 0
MA5600#display board 0/2
Add a board(ADEF) MA5600(config)#board add 0/1 ADE
Confirm a Board MA5600(config)#board confirm 0
Delete a board MA5600(config)#board delete 0/2
Reset a Board MA5600(config)#board reset 0/1
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Basic Maintenance Operations Basic Maintenance Operations
Equipment management
Reset the system MA5600(config)#reboot system
Show CPU Occupancy Ratio MA5600>display cpu 0/7
Display the system time MA5600> display time
Set the system time
MA5600#time HH:MM:SS YYYY/MM/DD
Display the system version MA5600(config)#display version 0/7
Setting hostname
MA5600(config)#sysname MA5600
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
System Management Configuration System Management Configuration
Configure File Management
Query the initial configuration of the MA5300 intelligent IP integrated
access equipment
MA5600#display saved-configuration
Query the current configuration of the MA5300 intelligent IP integrate
d access equipment
MA5600#display current-configuration
query the configuration commands of fault restoration.
MA5600#display unresumed-configuration
Save the current configuration MA5600#sav
e
Erase the configuration files in the Flash MA5600#eras
e flash data
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
ADSL Port ConfigurationADSL Port Configuration
To set the VPI/VCI of a port, run the command service-port.
MA5600(config)#service-port vlan 2 adsl 0/2/1 vpi 0 vci 35 rx-
cttr 0 tx-cttr 0
To add multiple virtual ports to a VLAN at a time, run the com
mand multi-service-port.
MA5600(config)#multi-service-port 3 adsl 0/2 3-10 rx-cttr 0 tx-c
ttr 0
(vlan-id 3, board 0/2 ,port range 3/10 )
Unblocking Adsl port
MA5600(config-if-adsl-0/2)#undo block all
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Contents Contents
1 Introduction to Command Line Operations
2 Basic System Configuration
3 Port Configuration
4 VLAN Service Configuration
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
ADSL Port ConfigurationADSL Port Configuration
MA5600
CON
ETH
MON
SCU
ADEF SPLT
PCMODEM
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
ADSL Port ConfigurationADSL Port Configuration
Entering ADSL board configuration mode
MA5600(config)#interface adsl 0/5
Add an ADSL2+ line profile
MA5600(config)#adsl line-profile add huawei…
Activate port 0 on the ADSL board with line-profile above:
MA5600(config-if-adsl-0/5)#activate 0 huawei
Resetting ADSL Chipset
MA5300(config-if-adsl-0/2)#chipset reset 1
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
ADSL Port ConfigurationADSL Port Configuration
Through the bit allocation information, you can get to know the
number of bits carried by every ADSL2+ tone (totally 512
tones), and analyze the performance of the line.
MA5600(config-if-adsl-0/2)#display line bit-allocation 61
Upstream bits per frame: 312
Downstream bits per frame: 5616
0 0 …… 6 6 ****** 7 9 ********* 8 10 **********
9 11 ***********10 12 ************11 12 ************12 13 *************13 14 **************
14 14 **************15 14 ************** ……31 6 ****** ……
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
ADSL Port ConfigurationADSL Port Configuration
Adding an ADSL Line Alarm Profile
MA5600(config)#adsl alarm-profile add 3
(Refer to operation manual to see more detail)
Bind alarm profile 1 with all ports of the ADSL2+ board
residing in slot 10.
MA5600(config-if-adsl-0/10)#alarm-config all 1
Deleting an ADSL Line Alarm Profile
MA5600(config)#adsl alarm-profile delete 3
Querying ADSL line alarm profile information
MA5600(config)#display adsl alarm-profile 3
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
ADSL Port ConfigurationADSL Port Configuration
Querying ADSL Port Information
MA5600(config)#display service-port port 0/10/1
Viewing line parameters of a port
MA5600(config-if-adsl-0/2)#display parameter 2
view the statistics collected on an ADSL2+ port within the past
15 minutes or 24 hours, or all available performance statistics.
MA5600(config-if-adsl-0/2)#display statistics performance 61
historic-15minutes 1
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
MA5600
CON
ETH
MON
SCU
SHEA
SHDSL Port ConfigurationSHDSL Port Configuration
MODEM
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
SHDSL Port ConfigurationSHDSL Port Configuration
Add an SHDSL line profile, and number it as 3
MA5600(config)#shdsl line-profile add 3
When operating in blocked state, an SHDSL port cannot
transmit data, and any operation on the port is prohibited. To
operate the port, you need to unblock the port first.
MA5600(config-if-shdsl-0/1)#undo block all
Activate all ports on the board residing in slot 4 using profile 3.
MA5600(config-if-shl-0/3)# activate all 3
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
SHDSL Port ConfigurationSHDSL Port Configuration
Adding an SHDSL Line Alarm Profile
MA5600(config)#shdsl alarm-profile add 2
Bind alarm profile 2 with all ports of the SHDSL board residing
in slot 3.
MA5600(config-if-shdsl-0/3)#alarm-config all 2
Deleting an SHDSL Line Alarm Profile
MA5600(config)#shdsl alarm-profile delete 2
Querying SHDSL line alarm profile information
MA5600(config)#display shdsl alarm-profile 2
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
SHDSL Port ConfigurationSHDSL Port Configuration
view the brief information on a port
MA5600(config-if-shl-0/3)#display port state 0
--------------------------------------------------------------------
Port Running Control Line Alarm Running Config Bind
ID Status Status Profile Profile Operation Operation Status
--------------------------------------------------------------------
0 Activating Active 1 1 Normal None Normal
--------------------------------------------------------------------
MA5600(config-if-shl-0/3)#display line state 2
MA5600(config-if-shl-0/3)#display statistics performance 2 current
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Ethernet Port ConfigurationEthernet Port Configuration
Set duplex mode of an Ethernet port
MA5600(config-if-scu-0/7)#duplex all full
Set the bit rate of an Ethernet port
MA5600(config-if-scu-0/7)#speed all 1000m
Set an Ethernet port’s network cable type
MA5600(config-if-scu-0/7)#mdi all auto
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Ethernet Port ConfigurationEthernet Port Configuration
Enable/Disable a Port’s Traffic Control Function
MA5600(config-if-scu-0/7)#flow-control all
Enable/Disable Traffic Suppression
MA5600(config-if-scu-0/7)#traffic-suppress all broadcast value 1
Configure a Port's MAC Address Learning Attribute
MA5600(config)#mac-address max-mac-count adsl 0/10/1 vpi 0 v
ci 35 10
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Ethernet Port ConfigurationEthernet Port Configuration
Enable/Disable Port Aggregation
MA5600(config-if-scu-0/7)#link-aggregation 0-1 ingress
MA5600(config-if-scu-0/7)#display link-aggregation
-----------------------------------------------
Master port Sub-ports Mode
-----------------------------------------------
0 1 ingress
-----------------------------------------------
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Ethernet Port ConfigurationEthernet Port Configuration
View the configuration of an Ethernet port
MA5600(config-if-scu-0/7)#display port state all
--------------------------------------------------------------------
Port Port Optic Native MDI Speed Duplex Flow- Active Link
Type Status VLAN (Mbps) Control State
--------------------------------------------------------------------
0 GE absence 1 - 1000 full on active offline
1 GE absence 1 - 1000 full on active offline
--------------------------------------------------------------------
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
VLAN Service ConfigurationVLAN Service Configuration
The MA5600 supports diverse VLAN applications, including:
Standard VLAN
Smart VLAN
MUX VLAN
Super VLAN
QinQ VLAN
Stacking VLAN
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Contents Contents
1 Introduction to Command Line Operations
2 Basic System Configuration
3 Port Configuration
4 VLAN Service Configuration
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Standard VLAN Configuration ExampleStandard VLAN Configuration Example
MA5600-A
A
F
E
D
SCU
MA5600-B
A
F
E
D
SCU
0/7/0
0/7/1
0/7/0
0/7/1
IP network
To establish the above connections,
do as follows:
Add VLAN 9
Run the command port vlan on MA56
00_A to add a port on MA5600_B an
d a port on MA5600_A to a standard
VLAN.
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Standard VLAN ConfigurationStandard VLAN Configuration
Standard VLAN configuration involves:
1.Creating/Deleting a standard VLAN
MA5600(config)#vlan 9 standard
2.Adding/Deleting a port to/from a standard VLAN
MA5600(config)#port vlan 9
{ frame/slot<S><3,4>|to<K> }:0/7
{ portlist<S><1,256> }:0
MA5600(config)#port vlan 9
{ frame/slot<S><3,4>|to<K> }:0/7
{ portlist<S><1,256> }:1
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Standard VLAN ServiceConfigurationStandard VLAN ServiceConfiguration
3.Displaying the information on a standard VLAN
MA5600(config)#display vlan 9
VLAN ID: 9
VLAN attribute: standard
Standard port number: 2
--------------------------
F/ S/ P State
--------------------------
0/ 7/ 0 down
0/ 7/ 1 down
--------------------------
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Smart VLAN Service ConfigurationSmart VLAN Service Configuration
The Smart VLAN configuration
involves:
1.Adding/Deleting a Smart VLAN
2.Adding/Deleting a port to/from
a Smart VLAN
3.Displaying the information on a
Smart VLAN
ADSL link configuration
User User User…………………...User
vlan 20
Upper
network
MA5600
CONETHMONA
DE
F
AD
EF
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Smart VLAN Service ConfigurationSmart VLAN Service Configuration
Create a Smart VLAN.
MA5600(config)#vlan
{ smart<K>|vlanid<U><1,4000> |attrib<K>}:20
{vlantype<E><mux,standard,smart,super>|to<K> }:smart
Add the upstream port
MA5600(config)#port vlan 20 0/7 0
Configure multicast PVCs.
MA5600(config)#vlan smart 20
{ vpi<K> }:vpi 0 vci 35
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
Smart VLAN Service ConfigurationSmart VLAN Service Configuration
Add port 1 on the ADSL board residing in slot 0/12 to VLAN 2
0.
MA5600(config)#service-port vlan 20 adsl 0/12/1 vpi 0 vci 35 r
x-cttr 2
Add port 0-31on the ADSL board residing in slot 0/0 to VLAN
20
MA5600(config)# multi-service-port vlan 20 adsl 0/0 0-31 rx-ct
tr 2 tx-cttr 2
After the above configuration, the PCs can visit Internet but
can not ping each other.
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
MUX VLAN ConfigurationMUX VLAN Configuration
The MUX VLAN configuration involves:
1.Creating/Deleting a MUX VLAN
2.Adding/Deleting a port to/from a MUX VLAN
3.Displaying the information on a MUX VLAN
ADSL link configuration
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
MUX VLAN ConfigurationMUX VLAN Configuration
Create a MUX VLAN.
MA5600(config)#vlan
{ smart<K>|vlanid<U><1,4000> }:10
{ mux<K>|standard<K>|smart<K>|to<K> }:mux
Add upstream port
MA5600(config)#port vlan 10 0/7 0
Add/Delete a service port to/from a MUX VLAN
MA5600(config)# service-port vlan 10 adsl 0/1/0 vpi 0 rx-cttr 0
tx-cttr 0
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal
MUX VLAN ConfigurationMUX VLAN Configuration
Add Multiple Ports to Different MUX VLAN
Add all ADSL and SHDSL ports to MUX VLANs, with the first
port corresponding to VLAN 2.
MA5600(config)#multi-service-port from-vlan 2 board 0-15 vpi
0 vci 35 rx-cttr 2 tx-cttr 2
Confidential Information of Huawei. No Spreading without Permission. Security Level: Internal