ISLAND 1. CONVERSION PROCEDURE - AJ Madison
1
ZLINE Kitchen & Bath | 916 Delaware Avenue, Marysville, OH 43040 | 350 Parr Circle, Reno, NV 89512 www.zlinekitchen.com | 1-614-777-5004 1. On the back side of the range top, remove the UPPER SHEET by unscrewing the two holes by the sides. 2. Lift the UPPER SHEET and flip to the under side. Two screws on each side must be unscrewed. Set aside once the screws are unscrewed. 3. Once this UPPER SHEET has been removed, six screws that are holding the BOTTOM SHEET must be unscrewed. 4. After unscrewing, lift the BOTTOM SHEET and set aside in case for any future kitchen renovations or dispose of. 5. Slide the UPPER SHEET back onto the range top. Screw in the two holes (shown on the right) to secure its place. 6. The UPPER SHEET should sit lower than before as it has replaced the BOTTOM SHEET. If successful, once installed, two holes should only be seen on the back side. UPPER SHEET ISLAND CONVERSION PROCEDURE for RT36 and RT48 1. 2. 3. 4. 5. 6.
Transcript of ISLAND 1. CONVERSION PROCEDURE - AJ Madison
ZLINE Kitchen & Bath | 916 Delaware Avenue, Marysville, OH 43040 | 350 Parr Circle, Reno, NV 89512www.zlinekitchen.com | 1-614-777-5004
1. On the back side of the range top, remove the UPPER SHEET by unscrewing the two holes by the sides.
2. Lift the UPPER SHEET and flip to the under side. Two screws on each side must be unscrewed.
Set aside once the screws are unscrewed.
3. Once this UPPER SHEET has been removed, six screws that are holding the BOTTOM SHEET must be unscrewed.
4. After unscrewing, lift the BOTTOM SHEET and set aside in case for any future kitchen renovations or dispose of.
5. Slide the UPPER SHEET back onto the range top. Screw in the two holes (shown on the right) to secure its place.
6. The UPPER SHEET should sit lower than before as it has replaced the BOTTOM SHEET. If successful, once installed, two holes should only be seen on the back side.
UPPER SHEET
ISLAND CONVERSION PROCEDUREfor RT36 and RT48
1.
2.
3.
4.
5.
6.
