INSTRUCTIONS FOR INSTALLING THE EMULATOR AND … · IMEI, I will send you the Biodanza Player...
Transcript of INSTRUCTIONS FOR INSTALLING THE EMULATOR AND … · IMEI, I will send you the Biodanza Player...
1
INSTRUCTIONS FOR INSTALLING THE EMULATOR AND
APPLICATION
Download the emulator; To do this, run Memu-Setup-6.0.8.1-ha1f867cd5
Click Install
Let it install (takes a few minutes…)
2
Click Launch…
Be patient…
If you get the following image:
3
So, you have to do hardware virtualization, before proceeding. Go to the
end of this document.
The installation is already done; now a few steps to get it going ...
Now, select the language…
4
Enter your Google account (or skip this step)…
Already done; now, a brief tutorial…
5
Next step: get IMEI; for it, click on Settings:
6
And on Advanced. There, read the IMEI and send it to me (you can take a
screenshot) ... (DO NOT press Generate, because that would change the
IMEI).
Click Cancel to return to the general screen. Once you have sent me the
IMEI, I will send you the Biodanza Player application and the rest of the
material you need (music, auxiliary files, etc.) in a pen-drive. Once received
the material, proceed as follows.
Copy the folder BIODANZA PLAYER: click on Shared folder (see next
image):
7
The following image appears:
Click on the Windows symbol of the fourth option (see next image):
8
A directory will open:
Copy the folder BIODANZA PLAYER there, with all its contents (it will
take a good while ...). Finally, it will look like this:
9
Finally, install the application: BiodanzaPlayerSRTHQESMEMU.apk. To do
this, click on the icon apk:
Open the directory where you have the application; If it's on the pen-drive,
you'll have something like this:
10
Select the app and click Open and Biodanza Player will install automatically.
Lastly, open the app and the welcome screen will show up:
11
Congratulations!. From here, it is advisable to read the User's Manual to
learn how to use the application.
INSTRUCTIONS FOR THE HARDWARE VIRTUALIZATION
Note1: Follow these instructions only if your machine has this
possibility; for this, install LeoMoon CPU-V and verify that it is so.
Note 2 (Disclaimer): This is a delicate operation, since it requires
access to the system's BIOS. It is convenient that this operation be
done by a knowledgeable person. We decline responsibility for any
problem that may arise as a result.
12
Restart the system, holding down Shift while pressing Power… The
following screen will appear:
Now Troubleshoot:
13
Now Advanced options:
14
Now UEFI Firmware Settings:
Now Restart:
15
The screen now may differ (depends on manufacturer), but it will be similar
the one of the two above. Search on System Configuration, or Advanced,
for Virtualization and change it to Enabled (if it were Disabled).
Once enabled, touch F10 for saving changes and exit.