Instruction Manualgdlp01.c-wss.com/gds/1/0300021231/01/dpv2410-im1-en.pdf · 2015-10-27 ·...

Instruction Manual

Video Display

•Beforeuse,besuretoreadthisguide,includingthesafetyandhandlingprecautions.

•Readingthisguidewillhelpyoulearntousethevideodisplayproperly.

•Storethisguidesafelysothatyoucanuseitinthefuture. English

2 Table of Content

Table of Content

Introduction .................................................................................................................................. 4Aboutthismanual.................................................................................................................................... 4

Trademarks.............................................................................................................................................. 4

SuppliedAccessories............................................................................................................................... 4

Safety Precautions ....................................................................................................................... 5

Handling Precautions ................................................................................................................... 6

Features ........................................................................................................................................ 8

Nomenclature ............................................................................................................................... 9

Installation/Connection .............................................................................................................. 11HowtoCarrytheMainUnit.................................................................................................................... 11

Procedurestoattachtheprotectionpanel.............................................................................................. 11

Procedurestoattach/detachstands....................................................................................................... 12

PreventingfromTipping......................................................................................................................... 13

MountingtheMainUnitonaStandorWall............................................................................................. 14

ConnectingtheMainUnittoInputDevices............................................................................................. 15

Turning on the Power ................................................................................................................. 17TurningonthePoweroftheMainUnit.................................................................................................... 17

Operating the Video Display ....................................................................................................... 18Operatingthejogdial............................................................................................................................. 18

BasicoperationstousetheOSDmenu.................................................................................................. 18

AdjustingImageQualityWhileViewingtheEntireImage......................................................................... 20

TemporarilySavingParameters(AnchorPointSetting)............................................................................ 21

CalibrationwithoutaPC......................................................................................................................... 22

Export/Import......................................................................................................................................... 23

SetDate/Time........................................................................................................................................ 25

InputtingCharacters............................................................................................................................... 25

UsingtheFunction(F)Buttons............................................................................................................... 26

UsingtheChannel(CH)Button............................................................................................................... 27

CheckingSignalInformationandStatusoftheMainUnit........................................................................ 27

OSD Menu .................................................................................................................................. 28OSDMenuIndex.................................................................................................................................... 28

Adjustment............................................................................................................................................. 34

ChannelSettings.................................................................................................................................... 43

DisplaySettings...................................................................................................................................... 45

AudioSettings........................................................................................................................................ 48

MarkerSettings...................................................................................................................................... 49

FunctionSettings................................................................................................................................... 54

SystemSettings..................................................................................................................................... 60

3Table of Content

SignalInformation................................................................................................................................... 65

SystemInformation................................................................................................................................ 65

Main specifications/Performance ............................................................................................... 66Dimensions............................................................................................................................................ 67

Appendix .................................................................................................................................... 68SupportedSignalFormat....................................................................................................................... 68

Image/FrameDisplay.............................................................................................................................. 79

InputSignalsandAdjustable/SettingItem............................................................................................... 82

Error Messages .......................................................................................................................... 83

Troubleshooting .......................................................................................................................... 85

Software Used in This Product ................................................................................................... 87

Index ........................................................................................................................................... 89

4 Introduction

IntroductionThank you for purchasing the Video Display DP-V2410.The On Screen Display (thereafter referred to OSD) default language setting is English. To change the OSD menu language setting, please refer to p. 60.

About this manual

Some of the illustration used in the manual have been simplified for clarity.

Conventions used in this manual

: Indicates a reference page. Note: Indicates a note. Reference: Indicates reference information. CAUTION: Indicates an item you must observe.

Trademarks

• HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the U.S. and other countries.

• VESA is a registered trademark or trademark of Video Electronics Standards Association in the U.S. and other countries.

•Other product and company names herein are trademarks or registered trademarks of their respective owners.

Supplied Accessories

The following items are supplied with this product. Please check before using.

AC Power Cord HT-21 DP-V2410 Instruction Manual (this document)

5Safety Precautions

Safety PrecautionsFor the customers in the U.S.A.ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencewhentheequipmentisoperatedinacommercialenvironment.Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructionmanual,maycauseharmfulinterferencetoradiocommunications.Operationofthisequipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcasetheuserwillberequiredtocorrecttheinterferenceathisownexpense.

Donotmakeanychangesormodificationstotheequipmentunlessotherwisespecifiedinthemanual.Ifsuchchangesormodificationsshouldbemade,youcouldberequiredtostopoperationoftheequipment.UseofshieldedcableisrequiredtocomplywithclassAlimitsinSubpartBofPart15ofFCCRules.

ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.

CanonU.S.AInc.OneCanonPark,Melville,NY11747,U.S.A.TelNo.(631)330-5000

For the customers in CanadaCANICES-3(A)/NMB-3(A)

For the customers in EuropeThisproductmaycauseinterferenceifusedinresidentialareas.Suchusemustbeavoidedunlesstheusertakesspecialmeasurestoreduceelectromagneticemissionstopreventinterferencetothereceptionofradioandtelevisionbroadcasts.

CANONINC.30-2,Shimomaruko3-chome,Ohta-ku,Tokyo146-8501,Japan

CANONEUROPAN.V.Bovenkerkerweg59,1185XBAmstelveen,TheNetherlands

OnlyforEuropeanUnionandEEA(Norway,IcelandandLiechtenstein)Thissymbolindicatesthatthisproductisnottobedisposedofwithyourhouseholdwaste,accordingtotheWEEEDirective(2012/19/EU)andnationallegislation.Thisproductshouldbehandedovertoadesignatedcollectionpoint,e.g.,onanauthorizedone-for-onebasiswhenyoubuyanewsimilarproductortoanauthorizedcollectionsiteforrecyclingwasteelectricalandelectronicequipment(EEE).ImproperhandlingofthistypeofwastecouldhaveapossiblenegativeimpactontheenvironmentandhumanhealthduetopotentiallyhazardoussubstancesthataregenerallyassociatedwithEEE.Atthesametime,yourcooperationinthecorrectdisposalofthisproductwillcontributetotheeffectiveusageofnaturalresources.Formoreinformationaboutwhereyoucandropoffyourwasteequipmentforrecycling,pleasecontactyourlocalcityoffice,wasteauthority,approvedWEEEschemeoryourhouseholdwastedisposalservice.FormoreinformationregardingreturnandrecyclingofWEEEproducts,pleasevisitwww.canon-europe.com/weee.

6 Handling Precautions

Handling PrecautionsPlaces to avoid using the video display

Donotusethevideodisplayinthefollowingplacesorconditions.• Placeswithexcessivedustorhumidity

• Placesthatwillexposethevideodisplaytodirectsunlight,smoke(suchasfromakeroseneheaterorothersuchsource)orsteam

• Nearheatsources,humidifiersorflammablegas

• Nearawindowduringrainorsnow

• Nearwaterorotherplacesthatcouldcausemoisturetoformonthevideodisplay

Screen Handling

• Thescreenmaybedamagedifitisleftfacingstrongsourceoflight.Pleasetakeprecautionswhenplacingitnearawindow.

• Donotpressfirmlyonthescreen,scratchitorplaceanobjectonthescreen.Itcancausenon-uniformityordamagetothepanel.

• Thescreenandcabinetmaybecomewarmduringuse.Notethisdoesnotconstituteamalfunction.

About Backlight

Thebacklighthasalimitedservicelifesoitsbrightnessmaydegradeandcolormaychangeduetoaging.

About Temporary Screen burn-in

Ifastationaryimageisdisplayedforaprolongedperiod,screenburn-inmayoccurwhereyouseeremnantsofwhatwasdisplayed.ThisisacharacteristicofLCDandisnotafailure.However,thisisonlytemporaryandwilldisappearwhenplayingvideo.

About the LCD screen

Thescreenisproducedusingextremelyhigh-precisionmanufacturingtechniques,withmorethan99.99%ofthepixelsoperatingtospecification.Lessthan0.01%ofthepixelsmayoccasionallymisfireorappearasblack,red,blueorgreendots.Inaddition,thistendencymayincreasethroughlongtermuseduetocharacteristicoftheLCDpanel.Thesedonotconstituteamalfunction.

Condensation

Ifthisequipmentisbroughtintoawarmroomwhileitiscoldoriftheroomisheatedsuddenly,condensationmayformonthesurfaceorinsidetheequipment.Notethattheequipmentmaybedamagedifitisusedundersuchcondition.Ifcondensationhasformedonthesurfaceorinsidetheequipment,donotusethevideodisplayasitmaygetdamaged.Turnthepoweroffandwaituntilthecondensationhasevaporatedbeforeusingthevideodisplay.

7Handling Precautions

Cleaning

• Beforecleaning,besuretounplugtheACpowersupplyandDCpowerplugfromthewalloutlet.

• Thescreenhasaspecialsurfacetreatment,avoidtouchingitdirectlywithyourhand.Inaddition,neveraffixadhesiveobjectssuchasseals.

• Neverusealcoholorbenzene,thinner,acidiccleaningsolution,alkalinecleaningsolution,abrasiveorchemicalwipesbecausethesewilldamagethescreen.

• Ifthescreenisdirty,wipegentlywithsoftdryclothsuchascleaningclothoreyeglassescleaningcloth.WipingthescreentoohardmaycauseunevennessonthescreenordamagetheLCDpanel.Thescreenmaybescratchedifwipedtoohardwithacleaningclothwithforeignparticlesattached.

• Whenthescreenisextremelydirty,wipewithsoftclothsuchascleaningclothoreyeglassescleaningclothmoistenedwithwater-dilutedneutraldetergent.

• Useablowertoremovedustfromthesurfaceofthescreen.

• Wipedirtoncabinetwithasoftcloth.Ifthescreenisverydirty,useamoistenedclothwithwaterormilddetergentdilutedwithwater.Donotusealcohol,benzene,paintthinner,orpesticidesastheymaydamagethesurfacefinishorerasecharactersonthecabinet.

Disposing

• Donotdisposetogetherwithnormalwaste.Donotincludethevideodisplayinwastethatwillbetakentolandfill.

• Observetherulesandregulationsofyourlocalauthoritieswhendisposing.

8 Features

FeaturesVideoDisplayDP-V2410isareferencedisplaysuitableforvideoproductionforbothdigitalcinemaandbroadcasting.ThevideodisplayprovideshighimagequalitymadepossiblebyCanon'simage-makingtechnologyaswellasbuilt-inperformanceandfunctionssuitableforshootingvideo.Thevideodisplayusesa24-inchpanelwith4096x2160resolution.ItisalsohighlyportablebecauseitiscompactandlightweightandcanbeusedwithaDCpowersupply.

Image quality and functions perfect for shooting video

• Equippedwithapanelwith4096x2160resolutionandbacklightsystem.

• Highbrightnessisavailablewhenusedinabrightplace.

• Highcontrastof2000:1isprovided.

• Highuniformityisprovidedbyminimizingthevariationduetotemperaturechangesandaging.

• SupportswideDCI-P3colorgamut.

• Equippedwithfunctionstoimproveimagequalityperformance.

-Supports"BoostContrast"toincreasethebrightnesswhenusedinabrightplace. -DisplaysITU-RBT.2020colorgamutattheoptimumlevelandsupports"ConstantLuminance".• EquippedwiththeHighDynamicRange(HDR)displayfunction.

• SupportsACESproxy(ACES1.0).

• EquippedwithfunctionstoassistshootingandvideocheckingincludingWaveFormMonitor,VectorScope,ScreenCapture,Zoom,andFalseColor.

• SupportsgammaequivalenttoCRTstandardizedbyITU-RBT.1886.

• Acolorgradingcontroller(Element-TkmadebyTangentWaveLtd),externalsensor,orUSBmemorycanbeconnectedtotheUSBport.

• Separately-soldDisplayControllerCL-01canbeconnectedtotheLANterminal.

• EquippedwithaHDMIinputterminal.

Use with other Canon equipment

• Supports4KRAW.

• Establishes4KRAWworkflowonACES.

• CanbeusedwithCinemaEOSSystemcameras.

-Equippedwithfunctionstoautomaticallydisplayacamera'sshootinginformationandswitchimagequalitymodesbyusingmetainformationofthecamera.-Specialgammafor"CanonLog2"thatEOSC300Mark hasisavailable.

• ItcandisplaydataonCanoncamerassupportingHDMITimeCodeoutput.

• EquippedwiththeFanStopfunctioninterlockedwiththeRECsignalofCanonprofessional-usevideocameras.

Portability

• Small,light-weightbodywitha24-inchpanelandweightoflessthan12kg

• Highdurabilityachievedbyametaloutercovering

• Thehandleonthemainunitisconvenientforinstallationandtransporting.Thehandleandadjustabletwopositionstandprovidesflexibleinstallationandhighportability.

• SupportsDCpowersupplyinput.

9Nomenclature

Nomenclature Front face of the main unit

2

1 1

3 4 5 6 7 8

9

1 Stand Therearetwomountingpositions. 12

2 Headphoneterminal Connectionforheadphoneset. 48

3 USBport Connectionforanexternalsensorforcalibration( 22),USBmemory,HUB,orcolorgradingcontroller(Element-TkmadebyTangentWaveLtd).

–

4 CH1to3buttons Changeschannel. 27

5 CDLbutton SwitchesbetweennormalandCDLmode. –

6 F1toF8buttons Executethedefinedfunction.YoucanassigndifferentfunctionsonFbuttonsinthenormalandCDLmodesrespectively.

26

7 MENUbutton Opens/closestheOSDmenu,ormovesuponelevelinamenu. 18

Jogdial MovestheselectionframewithintheOSDmenu,changesthesettings(up/down,left/right,rotation)anddetermines(press)theselection.

18

RESETbutton Resetstheitemstobeadjustedusingthesliderandenteredcharacters. 18

8 (Power)button TurnspowerOn/Off. 17

9 Powerindicator Displaysthestatusofthemainunit.Thebrightnessofthepowerindicatorcanbesetfrom"Off"or"1(dark)to5(brightest)"( 62).Evenwhenthepowerindicatoris"Off",itwillflashduringfirmwareupgrade,orwhenanerrorisdetected.Off:whenACorDCpowersupplyisnotconnectedGreenlit:whenanACorDCpowersupplyisconnectedandthepowerofthevideo

displayisonGreenflash:duringcalibrationorfirmwareupgradeAmberlit:duringstandby(anACorDCpowersupplyisconnectedandthepowerofthe

videodisplayisoff)Amberflash:whenerrorisdetected

–

10 Nomenclature

Back face of the main unit

Aq

Aa

As

Ad

AfAg Ah

Aq Carryinghandle Usedtoinstall,connect,orcarrytheunit. 11

Aa HDMIinputterminal UsedtoinputHDMIsignals. 16

As LAN(10/100BASE)terminal

ConnectionforaDisplayControllerCL-01(separatelysold)orotherequipment.–

Ad 3G/HD-SDIoutputterminal

Passthroughoutputcorrespondingto3G/HD-SDIinputterminal. –

Af 3G/HD-SDIinputterminal

UsedtoinputSDIsignals. 15

Ag DCpowerinputterminal

ConnectionforDCpowersupply. 17

Ah ACpowerinputterminal

ConnectionfortheprovidedACpowersupplycord. 17

CAUTION

• WhenconnectinganexternalsensorforcalibrationtotheUSBport,cablelengthmustnotexceed3m.Otherwise,communicationerrormayoccurandcorrectcalibrationmaynotbepossible.

• Forsafety,donotconnectanyconnectorthatmayhaveexcessivevoltagetotheterminalofthevideodisplaywhenconnectingperipheraldevices.

• PassthroughSD-SDIsignalsarenotoutputcorrectly.

Note

• BothFAT16andFAT32USBmemorydevicesaresupported.

• ProperoperationcannotbeguaranteedforallUSBmemories.

• Itmaytake10secondsormorefortheUSBmemorytoberecognized.IfthefunctiontosavedataonaUSBmemoryisexecutedduringrecognition,themessage"DetectingUSBmemory"isdisplayed.

11Installation/Connection

Installation/ConnectionHow to Carry the Main Unit

Whenliftingthevideodisplay,besuretoholdthecarryinghandleontheback.

CAUTION

• Whencarryingthevideodisplay,handleitcarefullynottotouchordamagethescreen.

Procedures to attach the protection panel

Youcanattachtheprotectionpaneltoprotectthescreenwhencarryingthevideodisplayorwhenusingitoutdoors.

1. Unscrew the four screws on the front face.Usea1.5mmhexagonalkey.Donotlosetheremovedscrews.Donotusethesescrewsforotherpurposes.

2. Place the protection panel by aligning its corners with the screw holes. ( 67).Takecarewhenattachingthepanelinordertoavoiddamagingit.

4×M37mmdeep(Max.)

CAUTION

• Avoidtouchingthescreenduringthisstepasitmaydamageit.

12 Installation/Connection

Procedures to attach/detach stands

Thestandcanbeattachedintwodifferentpositions.Thissectiondescribestheproceduretoattach/detachthestand,tochangethestandposition.Italsodescribestheprocedureforinstallingthevideodisplayonarackorawall.

CAUTION

• Useaflat,clearsurfacewhenattaching/detachingthestand.

• Thedisplaycantipoverifthestandhasnotbeenattached.


Detaching

1. Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the display.

2. Remove four fixing screws.Donotlosetheremovedscrews.Donotusethesescrewsforotherpurposes.

Attaching

1. Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the display.

2. Align the position of the stand and screw hole on the video display.Alighttheconvexpartofthestandandconcavepartofthevideodisplay.

3. Fix the left and right stands using two fixing screws respectively.

Rear

Screenside

Insidestandmountingpart

Stand

Standmountingscrewhole

Mountingscrew

Outsidestandmountingpart

Concavepart

Convexpart

Note

• Itisrecommendedtomountbothstandsineithertheoutsideorinsidepositions.


Preventing from Tipping

Fixingthevideodisplayusingscrewholesonthestandscanreducetheriskofthemainunittippingoverorfalling.

1. Use screws that fit the screw holes.Thescrewholesizeisshownbelow.

Screwhole4× 4.5

CAUTION

• Whensecuringthemainunittoatableordesk,pleaseensureatableordeskisstrongenoughtocarrytheweightofthemainunit.

• Itisrecommendedtoobtainassistancefromanotherpersonwhenperformingthisstep.



Mounting the Main Unit on a Stand or Wall

Thismainunitcanbefittedtoastand*ortoawallmountbracket*.Removethestandsbeforehand( 12).ScrewscompatiblewiththismainunitareM4x7mm(VESAStandard100x100mm).*Commerciallyavailable.

CAUTION

• Forsafety,makesuretoperformthisstepwithatleasttwopeople.

• Whenmountingthemainunitonawall,makesurethewallhassufficientstrength.Ifnecessary,applyreinforcement.Also,makesuretochecktheloadcapacityofthestandorwallmountbracket.

• Whenthevideodisplayisplacedonarackordisplaystandandventilationarounditisblockedbyequipmentplacedaboveorbeloworinasurroundingarea,theoperatingtemperaturemayincrease,causingafailureoroverheating.Inordertomaintaintheoperatingtemperatureconditionofthevideodisplay(0˚Cto40˚C),makeaspaceofatleast1U(4.4cm)aboveandbelowandatleast4cmspacefromitsback.Makeasufficientspacefromperipheralequipment,securevents,orinstallaventilationfan.

• Wheninstallingthevideodisplayonawall,makesufficientspacefromthewallsothatcablesarenotsqueezedortwisted.

• Whenmountingacommerciallyavailablestandorwallmountbracket,besurethattheydonotcontactthecarryinghandle.


• Makesurethatthemainunitdoesnotfallduringinstallation/removal.

1. Attach a commercially available stand or wall mount bracket using four screw holes on the back or side face of the main unit ( 67).Thescrewholesizeisshownbelow.

Rear4×M47mmdeep(Max.)

2×M48mmdeep(Max.)

Sameontheotherside

Side


Connecting the Main Unit to Input Devices

Thevideodisplayhas3G/HD-SDIandHDMIinputterminalsthatinputdevicesareconnectedto.

CAUTION

• Checkthatthepowerofthevideodisplayandinputdevicesisswitchedoffbeforeconnecting.

To input 4K signals using 3G/HD-SDI input terminal

• 3G/HD-SDI

3G/HD-SDIhasfourinputswhichcorrespondtoadisplayarea.Thedisplayareaiconslocatedinthe3G/HD-SDIinputterminalareashowwheretheinputvideoisdisplayedonthescreen.Pleaseensuretheseareconnectedcorrectlyasindicatedbytheicons.

Displayareaicon

SDI(IN)terminal

• 3G-SDIRAW

Toinput3G-SDIRAW,signalswithaframerateof30.00PorsmallercanbeinputusingoneinputinInputA-D.Signalswithaframerateover30.00PrequiretwoinputseitherInputAandInputBorInputCandInputD.

When the frequency is 30.00P or less When the frequency is over 30.00P

InputAandInputB

InputCandInputD

InputA

InputB

InputC

InputD

Reference

• TheconnectionischeckedusingCanareCorp.BNCcable(multi)4VS03A-5C.

• 3G-SDIRAWthroughoutoutputcorrespondstotheterminal.Evenduringfull-screendisplay,whensignalsareinputfromInputA,connectthecabletotheSDI(OUT)terminalofInputA.


To input signals from the HDMI input terminal

HDMIinputterminal

CAUTION

• UseaHDMIcablewiththeHighSpeedlogothatcomplieswiththeHDMIstandard.Whenanon-compliantHDMIstandardcableisused,thevideodisplaymaynotworknormally,forexampleavideobecomeschoppyornothingisdisplayed.

17Turning on the Power

Turning on the PowerThis section describes how to turn on the power of the main unit.

Turning on the Power of the Main Unit

1. Plug the provided AC power cord HT-21 to the AC power supply input terminal at the rear.The video display goes into standby and the power indicator lights up in amber.

When using a DC power supply

DC power supply input terminal specifications are shown below. When connected normally, the video display goes into standby and the power indicator lights up in amber. Check the specifications of the DC power supply input terminal and use a power supply that is compatible with the video display. Using a

power supply with incompatible voltage and polarity may cause fire or electric shock.

Pin No. Signal

1 - (GND)

2 + (24 V to 28 V, allowable current 10 A min.)

3 N.C.

2. Press the power supply button at the front.The power indicator lights green.

CAUTION

•When using the provided power plug adapter PU-01, be sure to connect the ground terminal to the ground.

• Use a 2 m or shorter DC cord that can bear an electric current of at least 10 A. When a cable longer than 2 m is used, the video display may not work normally for example a video becomes choppy and nothing is displayed.

• Do not connect cables for audio devices or sound cables to the DC power supply input terminal, as it may cause damage to the display unit.

Note

•Warming-up is necessary to stabilize the brightness of the video display. Wait at least 10 minutes after turning on the power before using.

•When an AC power supply is connected during the use of a DC power supply, the power source is switched to the AC power supply. When this happens, the power is turned off temporarily and then turned on again.

• Refer to the Canon website for detailed information about DC power supplies for which operation has been confirmed.

18 Operating the Video Display

Operating the Video DisplayUsingbuttonsandjogdialonthevideodisplay,youcanadjustimagequalityandconfiguresettingsforinputsignals.Inaddition,youcanassignthefrequentlyusedfunctionstotheCHandFbuttons.

Operating the jog dial

Theprocedurestooperatethejogdialaredescribedbelow.

MENUbuttonOpens/closestheOSDmenu,ormovesuponelevelinamenu.

RESETbuttonResetstheitemstobeadjustedusingthesliderandenteredcharacters.

JogdialUp,down,left,right/rotation:Usedtomovetoadifferentitemand

changesettings.Press:Confirmssettingsormovestheselectionframeup/down1level.

Basic operations to use the OSD menu

ThissectiondescribesbasicoperationstousetheOSDmenu.

1. Press the MENU button to open the OSD menu.

MainMenuTopScreen

SubMenu SettingOptions

19Operating the Video Display

2. Select an item using the jog dial and press it to determine the selection.Theselectionframemovestosubmenu.

3. Select an item using the jog dial and press it to determine the selection.Theselectionframemovestosettingoptions.

4. Select the setting using the jog dial.Settingschangeaccordingtotheoperationofthejogdial.

5. Press the jog dial to determine the selection.Theselectionframereturnstosubmenu.

6. Exit menu.WhenyoupresstheMENUbutton,theselectionframemovesuponemenulevel.MovetheselectionframeallthewaytothemainmenuonthetopscreenandthenpresstheMENUbuttontoexitthemenu.

Note

• PresstheRESETbuttontoreturn"Contrast","Brightness","Chroma","Sharpness","Power","Saturation","Offset",and"Slope"tothefactorydefaultduringadjustment.In"User1-7"modewhereyouareperformingcalibration,thesettingreturnstothevalueaftercalibrationinsteadofthefactorydefault.

• Toadjustimagequality,warming-upisnecessarytostabilizethebrightnessofthevideodisplay.Waitatleast10minutesafterturningonthepowerbeforeusing.

• TheOSDmenuandsliderwilldisappearautomaticallyifnooperationisperformedforapproximately1minute.TheFbuttonwilldisappearautomaticallyifnooperationisperformedforapproximately10seconds.

• Thesettingsthatcannotbeset,aregrayedout.


Adjusting Image Quality While Viewing the Entire Image

YoucanadjusttheOSDmenutodisplayasaslideratthebottomofthescreen.Thisallowsfortheimagequalitytobeadjustedwhilstitisdisplayedonthescreen.

1. Press the jog dial when the selection frame is on setting options.Asliderappearsatthebottomofthescreen.

2. Make adjustments using the jog dial with using the slider as guide.

3. When adjustments are completed, press the jog dial.ThescreenreturnstotheoriginalOSDmenu.

Adjusting "Gain R/G/B, Bias R/G/B" under "Color Temperature"

YoucanadjustRGBallatonceorindividuallywhenthesliderforadjusting"GainR/G/B"and"BiasR/G/B"aredisplayed.

1. Switch the guide in the upper right area of the slider screen using the jog dial ( ).Theindicationchangesto"RGB","R","G",and"B".


Adjusting "x, y" under "Color Temperature"

Youcanadjust"x,y"in"ColorTemperature"onthecolormap.

1. Adjust "x" with the and "y" with .Theadjustedvalueisindicatedbythe" "markonthecolormap.


Defaultvalue

Lastusedvalue

Currentvalue

Currentvalue


Temporarily Saving Parameters (Anchor Point Setting)

Youcantemporarilysaveparametersfor"Contrast","Brightness","Chroma",and"Sharpness"andrecoverthevalues.See 39forsettinganchorpointsduringCDLadjustment.


2. Select "Adjustment" using the jog dial and press the dial to determine the selection.Theselectionframemovestosubmenu.

3. Select "Anchor Adjustment" using the jog dial and press the dial to determine the selection.Whentheconfirmationscreenappears,select"OK".Theparameterissavedandsetsanchorpoint.

4. Adjust the image quality again and press the RESET button on the video display.PresstheRESETbuttontoreturntoeachsavedanchorpoint.

CurrentvalueLastusedvalue

Anchorpoint

Note

• Executing"Reset"under"Adjustment"or"ResetAllSettings"under"SystemSettings"resetssavedanchorpointsandthesettingsreturntotheirfactorydefaultvalues.

• Whencalibrationisperformedin"User1-7"under"PictureMode",thevaluesaresavedasanchorpoints.


Calibration without a PC ( 40)

When"User1-7"under"PictureMode"isselected,youcanperformcalibrationusinganexternalsensor,withoutusingthecomputer.ThesupportedexternalsensorsareKonikaMinoltaDisplayColorAnalyzersCA-310andCA-210.BesuretoalsoreadtheinstructionmanualoftheCA-310andCA-210.

1. Connect the display color analyzer to the USB port of the main unit.

2. Open the OSD menu and select "Adjustment" → "Detail Settings" → "Calibration".Seteachtargetvalue.

3. Press the jog dial and select "Start".Pleasefollowtheinformationindicatedonthescreen.

4. Initialize the sensor.SetthemodedialoftheUniversalMeasuringProbeto"0-CAL".Pressthejogdialofthevideodisplay,select"OK",andexecuteinitialization.

5. Place the universal measuring probe pointing at the center of the video display.Setthemodedialoftheuniversalmeasuringprobeto"MEAS"andplacetheprobeasshownbelowaccordingtothedisplayedcontent.Pressthejogdialofthevideodisplay,select"OK",andexecutecalibration.

KonicaMinoltaUniversalMeasuringProbeCA-310support:CA-PU32,CA-PU35CA-210support:CA-PU12,CA-PU15

KonicaMinoltaDisplayColorAnalyzerCA-310,CA-210

MainUnit

6. Finish calibration.Whenthemessage"Calibrationiscompleted".isdisplayed,pressthejogdialandselect"OK".

• Ifthemessage"Calibrationerror."isdisplayed.Calibrationhasbeenterminatedduetoanerror.Themainunitreturnstothestatebeforecalibration.( 83)

• TocancelcalibrationPressthejogdialduringcalibrationandselect"Cancel".Themainunitreturnstothestatebeforecalibration.


Note

• DuetothecharacteristicofLCDpanelandindividualdifferenceofCA-310andCA-210,thecalibrationresultsmaydiffer.

• Performmatrixcalibrationofthedisplaycoloranalyzerpriortocalibration.Ifcalibrationisperformedwithoutperformingmatrixcalibration,anerrormayoccur.RefertotheCA-310andCA-210instructionmanualforthedetailoperation.

• Warming-upisnecessarytostabilizethebrightnessofthevideodisplay.Waitatleast10minutesafterturningonthepowerbeforecalibration.

• Performcalibrationinadarkroomsothatnoexternallightentersthesensor.Ifexternallightentersthesensor,lowbrightnesscharacteristicscannotbecalibratedcorrectly.

Export/Import

Youcanexport/importLUTandCDLparametersaswellasmainmenusettings.InsertaUSBmemorystickintotheUSBportofthemainunit.

LUT Import ( 39)

LUTcanbeimportedexceptwhen"ACESproxy"isselectedfor"PictureMode"or"ACESproxy"isselectedfor"ColorGamut".


2. Select "Adjustment" → "Detail Settings" → "LUT Import" using the jog dial.

3. Select the file using the jog dial.Inthe"Filename"field,searchanddisplayafilewithextension".clut"intherootfolder.

4. Select the LUT file type using the jog dial. SelectthefiletypeoftheLUTbyusing"Gamma"or"ColorGamut".

5. Select "Select LUT" using the jog dial.SelectsUserLUT1-8.

6. Select the standard color gamut using the jog dial.SelectthecolorgamutusedwhencreatingtheLUT(when"ColorGamut"under"LUTType"isselected).

7. Select "Execute" using the jog dial.Whentheconfirmationscreenappears,select"OK".Importstarts.

Note

• TheLUTfileisproprietarytoCanonVideoDisplay.RefertotheCanonwebsiteforthefileformatandhowtocreate.

• Upto1000LUTimportfilesarerecognized.

• YoucandeletetheimportedLUT.YoucanspecifythenameofLUT( 39).


Export/Import Main Menu Settings ( 64)


2. Select "System Settings" → "Export/Import".

3. Select "Export" or "Import" using the jog dial.

Exporting-Select"Target"from"USB"or"User1-3".Export"USB"totheUSBmemoryand"User1-3"tothebuilt-inmemoryofthemainunit.-Select"Filename".Factorydefaultis"dinfo_dpv2410.dat".YoucanchangethenameofthefiletobeexportedtotheUSBmemorywithin16one-bytecharactersincludingalphabeticalcharacters,numbers,andsymbols.-Select"Execute".Whentheconfirmationscreenappears,select"OK".Exportstarts.

Importing-Select"Target"from"USB"or"User1-3".Specifythedestinationtosavethefiletobeimported.-Select"Filename".-In"Settings",select"All"or"MainMenuName".-Select"Execute".Whentheconfirmationscreenappears,select"OK".Importstarts.

Note

• Afterexportto"User1-3",youcanselecttheconfigurationsatstartupfrom"User1-3"in"PoweronSetting"in"SystemSettings( 64).

Exporting/Importing CDL Parameters ( 39)


2. Select "Adjustment" → "CDL" → "Detail Settings" using the jog dial.

3. Select "CDL Export" or "CDL Import".

Exporting-Select"CDLPreset".-Selectafileformat".ccc"or".cdl"-Select"Execute".Whentheconfirmationscreenappears,select"OK".Exportstarts.

Importing-Select"Filename".-Select"CDLPreset".-Select"Execute".Whentheconfirmationscreenappears,select"OK".Importstarts.

Note

• Theexportedfileisautomaticallysavedunderthename"YYYYMMDDhhmmss_Presetname.ccc(cdl)".

• Upto1000CDLimportfilesarerecognized.


Set Date/Time ( 62)

ThissectiondescribeshowtosettheDate/Time.TheDate/Timeofthisvideodisplaywillberesetifthepowercordisnotconnectedforabout20days.


2. Select "System Settings"→"Date/Time".AscreentoinputtheDate/Timeappears.

3. Move the selection frame using the jog dial.Numberschangeasyouoperatethejogdial.Repeatuntilyoucompletesettingtheyear,month,date,hour,andminute.

4. Press the jog dial when you are finished.Theselectionframemovesto"OK".

5. Check the content and press the jog dial to confirm the settings.

Reference

• Whenselecting"Cancel"orpressingMENUbuttonbeforeselecting"OK",thesettingswillberesetandthepreviousscreenwillbedisplayed.

Inputting Characters

Thissectiondescribeshowtoinputthecharacters.Usethisfunctiontospecifyachannelname,adisplayname,orfilename.


2. The character input screen appears automatically when character input is required.Movetheselectionframetothelocationtoentercharactersusingthejogdial( orrotation).

3. Select characters using the jog dial ( or rotation).Thefollowingcharacterscanbeselected:Press buttonstodisplaythemonebyone.Youcaninputupto16characters. Alphanumericcharacters:AtoZ,atoz,0to9 Symbols:,.:;‘`-+/=%&!?#_|$^~@[]<>()spaceSomecharacterscannotbeusedforafilename.Inthiscase,theyareautomaticallyskipped.

4. Repeat steps 2 and 3 until the desired text has been inputted.

5. Press the jog dial when you are finished.Theselectionframemovesto"OK".

6. Check the content and press the jog dial to confirm the settings.

Reference

• Whenselecting"Cancel"orpressingMENUbuttonbeforeselecting"OK",thesettingswillberesetandthepreviousscreenwillbedisplayed.

• Toerasethecharacterintheselectionframe,presstheRESETbuttonofthevideodisplay.


Using the Function (F) Buttons

YoucanassignfunctionstotheFbuttonsonthevideodisplaytoexecutetheminstantly.


2. Select "System Settings" → "Function/Channel Button" → "Display Function" or "Display Function (CDL)" and press the jog dial to determine the selection.AnewwindowopensanddisplaysbuttonnamesF1toF8.

3. Select the name of the button using the jog dial and press the jog dial to determine the selection.TheselectionframemovestonextOSDmenulevel.

4. Select the function to assign using the jog dial.See"DisplayFunction"or"DisplayFunction(CDL)"( 61)fortheavailablefunctions.

5. Press the jog dial to determine the selection.Thesettingisconfirmed.

Reference

• Select"FunctionSettings"→"VariousFunction"andset"FunctionGuide"to"On".Then,youcancheckthelistoffunctionsassignedtoFbuttonsonthevideodisplaybypressingthejogdialwhileOSDisnotdisplayed( 58).


Using the Channel (CH) Button

Youcanassignchannels(varioussettingsrelatedtoinputsignal)totheCHbuttonsonthevideodisplayandswitchchannelsinstantly.


2. Select "System Settings" → "Function/Channel Button" → "Display Channel" and press the jog dial to determine the selection.AnewwindowopensanddisplaysbuttonnamesCH1toCH3.

3. Select the name of the button using the jog dial and press the jog dial to determine the selection.TheselectionframemovestonextOSDmenulevel.

4. Select the channel to assign using the jog dial.See"ChannelSettings"( 43)fortheconfigurablesettings.

5. Press the jog dial to determine the selection.Thesettingisconfirmed.

Thefollowingcontentisassignedtochannelbuttonsonthevideodisplaybyfactorydefault.

CH CH1 CH2 CH3

InputConfiguration 3G/HD-SDI HDMI 3G-SDIRAW

SelectInputSignal Automatic Automatic Automatic

Format Automatic Automatic Automatic

InternalSync Off Off Off

ChannelName (Blank) (Blank) (Blank)

PictureMode ITU-RBT.709 ITU-RBT.709 CanonLog

ColorRange Automatic Automatic Automatic

Checking Signal Information and Status of the Main Unit

Thevideodisplayisequippedwithabannerfunctionwhichdisplayssignalinformationorthestatusofthemainunit.

1. Press the jog dial when the OSD menu is closed.Thechannelname,signalinformation,andstatusofthemainunitwillbedisplayedinthebanner.Itwillautomaticallydisappearafter6seconds.

Note

• Formoredetailedsignalinformation,pleaserefertothesectionon"SignalInformation"( 65).

• The"Detectingsync."bannerwillcontinuetoappearuntiltheinputsignalissynchronized.

28 OSD Menu

OSD MenuOSD Menu IndexAdjustment( 34)

PictureMode

Contrast

Brightness

Chroma

Sharpness

BacklightControl

ColorTemperature

ColorGamut

Gamma

HDRRange

IDT

ODT

ODTSurround

ColorRange

CDL

CDLPreset

Power

Saturation

Offset

Slope

CDLBypass

DetailSettings

CDLExport

CDLImport

CDLPresetName

AnchorCDL

ResetCDL

DetailSettings

BoostContrast

LUTImport

LUTName

LUTDelete

2020ConstantLuminance

2020GamutMapping

Calibration

CopyPictureMode

PictureModeName

AnchorAdjustment

Reset

29OSD Menu

ChannelSettings( 43)

SelectChannel

InputConfiguration

SelectInputSignal

Format

InternalSync

ChannelName

PictureMode

ColorRange

DisplaySettings( 45)

ScreenScaling

Zoom

ScalingMethod

FrameHold

BackgroundColor

I/PsF

I/PConversion

PsF

FilmCadence

AudioSettings( 48)

SDIGroup

CHL/R(SDI)

CHL/R(HDMI)

Volume

AudioSwitch

SelectInput

30 OSD Menu

MarkerSettings( 49)

MarkerPreset

AspectMarker

Enable

Mask

AspectRatio

Line

LineWidth

LineColor

LineBrightness

HPosition

VPosition

SafetyZoneMarker1,2

Enable

AspectRatio

AreaSize

Rate(%)

Width(dot)

Height(dot)

Shape

LineWidth

LineColor

LineBrightness

HPosition

VPosition

AreaMarker

Enable

HPosition

VPosition

Width(dot)

Height(dot)

Mask

Line

LineWidth

LineColor

LineBrightness

CenterMarker

Enable

Size

LineWidth

LineColor

LineBrightness

31OSD Menu

GridMarker

Enable

Distance

LineWidth

LineColor

LineBrightness

FunctionSettings( 54)

Peaking

Enable(Peaking1/Peaking2/Off)

Monochrome

Frequency

Range

Color

FalseColor

ScreenCapture

Capture

FrameHold

CaptureSource

PlaybackFile

FinishPlaybackFile

TimeCode

Enable

Type

Size

Position

WaveFormMonitor

Enable

SelectSignal

DisplayType

SelectLine

Position

Guide

StandardLevelHigh

StandardLevelLow

Color

VectorScope

Enable

Target

Position

32 OSD Menu

AudioLevelMeter

Enable

ChannelNumber(SDI)

ChannelNumber(HDMI)

PeakHold

StandardLevel

TestPattern

VariousFunction

Monochrome,BlueOnly,RedOff,GreenOff,BlueOff,Banner,FunctionGuide,OSDPosition,OSDSize,BacklightScan

CameraLink

Adjustment

ColorGamut/Gamma

ColorTemperature

ColorRange

DisplayColorGamut

Fan

CameraInformation

SystemSettings( 60)

Network

Language

Function/ChannelButton

DisplayFunction

DisplayFunction(CDL)

DisplayChannel

DisplayName

Date/Time

PowerIndicatorBrightness

DisplayButtonLED

CompatibleSettings

FirmwareUpdate

ProtectSettings

Password

ProtectTarget

Protect

FanSettings

FanControl

FanStop

Export/Import

Export

Import

PoweronSetting

ResetAllSettings

33OSD Menu

SignalInformation( 65)

Channel

InputConfiguration

SelectInputSignal

Format

Resolution

PictureRate,I/P/PsF

SDIPayloadID

VideoStandard

SamplingStructure

BitDepth

PictureRate

ScanningMethod

LinkNumber

PixelEncoding

ColorDepth

Matrix

RGBRange

SystemInformation( 65)

DisplayModelName

DisplaySerialNo.

DisplayFirmwareVer.

DisplayUsageTime

DisplayIPAddress

DisplaySubnetMask

DisplayMACAddress

34 OSD Menu

Adjustment

ThismenuisusedtoadjusttheimagequalityandperformcalibrationwithoutaPC.

Item Setting Options (underline indicates factory default)

PictureMode

Selectapresetmode.See 41,42foreachsetting.SMPTE-C,EBU,ITU-R BT.709,ITU-R BT.2020,Adobe RGB,DCI-P3:Modesettothebrightness,colortemperature,gamma,andcolorgamutofthethreeprimarycolorschromaticitypointsofeachstandard.User 1-7:Custommodes.Seteachitemof"Adjustment".Youcanchangethemodenamewithin16one-bytecharactersincludingalphabeticalcharacters,numbers,andsymbols.Canon Log:CanonLogisidealwhenviewingimagecapturedwithCINEMAEOSSYSTEMcamera/videocamera.PerformslinearconversionanddisplaysCanonLogvideowithouthavingtoimportViewingLUT.ACESproxy:AmodetodisplayACESproxy(ACES1.0)videosinoptimumgammaandcolorgamut.

Contrast Adjuststhewhiteleveloftheimage.(Incrementsof1)When"BoostContrast"is"On","Contrast[BOOST]"isdisplayed.0to1500When"BoostContrast"in"DetailSettings"issetto"On",thesettablerangeisshownbelow.1500to4000

Brightness Adjuststheblackleveloftheimage.(Incrementsof1)-500to500

Chroma Adjuststhecolorsaturationoftheimage(colordepth).(Incrementsof1)0to2000

Sharpness Adjuststhesharpnessoftheimage.(Incrementsof1)0to100

BacklightControl

Switchesthebacklightcontrolmethod.Local Dimming (High, Low):Localdimmingisatechnologytocontroltheamountoflightemittedbythebacklightforeacharea.Thebacklightofbrightareaisincreasedandthedarkareaisdecreasedaccordingtothedisplayedcontent.Global Dimming:Globaldimmingistheabilitytocontroltheamountoflightemittedbythebacklightontheentirescreen.Iftheimageisdark,thewholedisplayisdarken.Off:Nobacklightdimming.

Note

• When"GlobalDimming"isselected,thecontrastmaychangetemporarilyinordertomaintaingradationdependingontheimage.Ifthisisundesirable,turnit"Off"andseeifitimproves.

• When"BoostContrast"issetto"On","BacklightControl"turnsto"Off".

35OSD Menu


ColorTemperature Setsthecolortemperature.D93, D65, D61, D60, D56, D50, DCI-P3:Selectfrompresetcolortemperatures.Gain R/G/B, Bias R/G/B:Canbeadjustedinincrementsof1whenapresetcolortemperatureisselected.Gain R/G/B: 0to1023 (in increments of 1)Bias R/G/B: -500to500 (in increments of 1)Custom (xy):YoucanadjustCIEx,yinincrementsof0.001.x: 0.260to0.360 (in 0.001 increments)y: 0.260to0.360 (in 0.001 increments)

Note

• "Custom(xy)"and"GainR/G/B"or"BiasR/G/B"cannotbeselectedatthesametime.

• If"Custom(xy)"aremodifiedafteradjusting"GainR/G/B"or"BiasR/G/B"thenboththesevalueswillreturntofactorydefault.

• When"GainR/G/B"or"BiasR/G/B"valueisadjusted,anasterisk"*"isdisplayedbycolortemperaturepresetmode.

• Thedisplayedcolorcoordinates(x,y)arejustaguideandnotguaranteedabsolutevalues.

ColorGamut Colorgamutcanbeselectedwhen"User1-7"or"CanonLog"isselectedfor"PictureMode".SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3:Colorgamutcomplianttoeachstandard.Native:Colorgamutthatcanbedisplayedbythisvideodisplay.Cinema Gamut to 709, Cinema Gamut to 2020, Cinema Gamut to DCI, DCI-P3+ to 709, DCI-P3+ to DCI, DCI-P3 to 709, ITU-R BT.2020 to 709:ModeswherethecolorgamutisconvertedtomonitorCinemaGamut,DCI-P3+,BT.2020,andDCI-P3videosrecordedbytheCINEMAEOSSYSTEMEOSC500/C500PLandC300MarkIIACESproxy:DisplaysthecolorgamutofACESproxy.User LUT 1-8:SetsbyloadinganexternalLUT.

Note

• ForcheckingthevideocapturedwithCinemaEOSSystem,pleaserefertothe"ParameterofCinemaEOSSystemandDP-V2410( 58)"in"Adjustment".

• When"ITU-RBT.2020","CinemaGamutto709","CinemaGamutto2020","CinemaGamuttoDCI","DCI-P3+to709","DCI-P3+toDCI","DCI-P3to709",or"ITU-RBT.2020to709"isselected,theDP-V2410displaysimagesafterconvertingthecolorgamutasshownbelow.Dataoutsideofthecolorgamutafterconversionisalsodisplayedattheoptimumlevel.

Inputvideocolorgamut ColorgamutafterconversionontheDP-V2410

ITU-RBT.2020 Native

CinemaGamutto709 ITU-RBT.709

CinemaGamutto2020 Native

CinemaGamuttoDCI DCI-P3

DCI-P3+to709 ITU-RBT.709

DCI-P3+toDCI DCI-P3

DCI-P3to709 ITU-RBT.709

ITU-RBT.2020to709 ITU-RBT.709

36 OSD Menu


Gamma Sets the Gamma.2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, Canon Log, Canon Log 2: Select the preset gamma.Canon Log (HDR), Canon Log 2 (HDR), SMPTE ST 2084: Select the gamma for HDR display.User LUT 1-8: When "User 1-7" or "Canon Log" is selected for "Picture Mode", load an external LUT and configure.

The relationship between "Color Gamut" and "Gamma" that can be selected is shown below. When "Color Gamut" is changed, gamma is changed to the underlined value (default value) only when current gamma value is not selectable.

Picture Mode Color Gamut Selectable Gamma

SMPTE-C Cannot be selected 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, Canon Log, Canon Log (HDR), SMPTE ST 2084, User LUT 1- 8

EBU 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, Canon Log, Canon Log (HDR), SMPTE ST 2084, User LUT 1- 8

ITU-R BT.709, ITU-R BT.2020

2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, Canon Log, Canon Log (HDR), Canon Log 2, Canon Log 2 (HDR), SMPTE ST 2084, User LUT 1- 8

DCI-P3 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, Canon Log, Canon Log (HDR), Canon Log 2, Canon Log 2 (HDR), SMPTE ST 2084, User LUT 1- 8

Adobe RGB 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, User LUT 1- 8

Canon Log, User 1-7

SMPTE-C 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, Canon Log, Canon Log (HDR), SMPTE ST 2084, User LUT 1- 8

EBU 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, Canon Log, Canon Log (HDR), SMPTE ST 2084, User LUT 1- 8

ITU-R BT.709, ITU-R BT.2020

2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, Canon Log, Canon Log (HDR), Canon Log 2, Canon Log 2 (HDR), SMPTE ST 2084, User LUT 1- 8

Adobe RGB 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, User LUT 1- 8

DCI-P3 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, Canon Log, Canon Log (HDR), Canon Log 2, Canon Log 2 (HDR), SMPTE ST 2084, User LUT 1- 8

Native 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, SMPTE ST 2084, User LUT 1- 8

Cinema Gamut to 709, Cinema Gamut to DCI

Canon Log, Canon Log (HDR), Canon Log 2, Canon Log 2 (HDR)

Cinema Gamut to 2020 Canon Log 2, Canon Log 2 (HDR)

DCI-P3 to 709, ITU-R BT.2020 to 709

Canon Log 2

DCI-P3+ to 709, DCI-P3+ to DCI

Canon Log, Canon Log (HDR)

User LUT 1-8 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, User LUT 1- 8

Note

• For checking the captured video with Cinema EOS System, please refer to the "Parameter of Cinema EOS System and DP-V2410 ( 58)" in "Adjustment".

37OSD Menu


HDRRange Settingisenabledwhen"CanonLog(HDR)","CanonLog2(HDR)",or"SMPTEST2084"isselectedfor"Gamma".Canon Log (HDR): Setsthedynamicrangetobedisplayedfrom0to800%that"CanonLog"has.

100 to 800%(in100increments)Canon Log 2 (HDR): Setsthedynamicrangetobedisplayedfrom0to1600%that"CanonLog2"

has.100 to 1600%(in100increments)SMPTE ST 2084: Setsthedynamicrangetobedisplayedfrom0.005to10,000nitthat"SMPTEST

2084"has.100 to 4000 (2000) nit(in100increments)

SettingproceduresTheproceduresbelowuseCanonLog(HDR)asanexample.Whenthemaximumvalue(800%)isspecified,the800%dynamicrangeofCanonLogisassignedtothedynamicrangeofthevideodisplay.Althoughthebrightnessinappearancelowers,youcancheckthedynamicrangeincludedinvideosignals.When400%isspecified,partexceeding400%isclipped(gradationissaturated)andpartupto400%isassignedtothedynamicrangeofthevideodisplay.ThisisthesameforCanonLog2(HDR)."SMPTEST2084"hasthedynamicrangeof0.005to10,000nit.Therefore,whenthemaximumvalue(4000nit)isspecified,partexceeding4000nitisclippedandpartupto4000nitisassignedtothedynamicrangeofthevideodisplay.Althoughthebrightnessinappearancelowers,youcancheckthedynamicrangeupto4000nit.When1000nitisspecified,partexceeding1000nitisclippedandpartupto1000nitisassignedtothedynamicrangeofthevideodisplay.ThebrightnessofthevideodisplaycorrespondstothevaluesetforContrast.

800%

400%

800%

400% 400%

Canon Log 800% signal

(Contrast: 4000)

CanonLog(HDR):Setto800 CanonLog(HDR):Setto400

CanonLogrange

CanonLogrange

DP-V2410range

DP-V2410range

GradationisreproducedbyassigningtherangetotherangeoftheDP-V2410(whichlowersthebrightness).

Clip(Saturatesgradation.)

Brightnessvaluecorrespondingtothecontrastsetting

IDT SetswhetherornottoapplyIDT(InputDeviceTransform)to"3G-SDIRAW"signals( 43)when"PictureMode"issetto"CanonLog"and"ACESproxy"isselectedfor"ColorGamut"orwhen"ACESproxy"isselectedfor"PictureMode".Automatic:Appliedautomatically.Off:Notapplied.

ODT ThisisdisplayedinsteadofGammaandColorGamutwhen"PictureMode"issetto"CanonLog"and"ACESproxy"isselectedfor"ColorGamut"orwhen"ACESproxy"isselectedfor"PictureMode".ITU-R BT.709, ITU-R BT.2020, DCI-P3:ACESproxyisconvertedintorespectivemode.

38 OSD Menu


ODTSurround Thisisdisplayedinsteadof"Gamma"and"ColorGamut"when"PictureMode"issetto"CanonLog"and"ACESproxy"isselectedfor"ColorGamut"orwhen"ACESproxy"isselectedfor"PictureMode".Dim Surround:EnablesDimSurroundprocessspecifiedbyACESproxy(ACES1.0).Dark Surround:EnablesDarkSurroundspecifiedbyACESproxy(ACES1.0).

ColorRange SetsthequantizationrangeforSDIandHDMIrespectively.Automatic:Setstherangebasedonsignalinformationautomatically.Full (0-255):SetstoBlacklevel:0;Whitelevel:1023(10-bit)/4095(12-bit).Limited 1 (16-235):Limitstheblackandwhiterange.

Blacklevel:64(10-bit)/256(12-bit)Whitelevel:940(10-bit)/3760(12-bit)

Limited 2 (16-255):Limitstheblackrange.Blacklevel:64(10-bit)/256(12-bit)Whitelevel:1023(10-bit)/4095(12-bit)

Note

• Settingisdisabledwhen"ACESproxy"isselectedfor"PictureMode"or"ACESproxy"isselectedfor"ColorGamut".

• Operationswhen"Automatic"isselectedaredescribedbelow.- WhenHDMIisselected,"Full(0-255)"or"Limited1(16-235)"issetautomaticallydependingonHDMIsignalinformation.

- When"DCI-P3"isselectedfor"PictureMode",or"DCI-P3","CinemaGamuttoDCI"or"DCI-P3+toDCI"isselectedfor"ColorGamut","Full(0-255)"isset.

- When"CanonLog"or"CanonLog2"isselectedfor"Gamma","Limited2(16-255)"isset.- "Limited1(16-235)"issetintheothercases.

39OSD Menu


CDL ConfiguressettingsforCDL.CDLfilescreatedonCanonVideoDisplayDP-V3010canalsobeusedbecausethefiletypeisthesame.

CDLPreset SetsCDLpreset.ImportedLUTcanalsobesetaspreset.CDL 1-15, User LUT

CAUTION

• When"UserLUT"isselected,all"CDL"items,"Chroma",and"BlueOnly"cannotbechanged.

Power Adjuststhegamma(in0.01increments).0.50 to 4.00 (1.00)

Saturation Adjuststhecolorsaturationoftheimage(in0.001increments).0.000 to 2.000 (1.000)

Offset Adjuststheblacklevel(in0.001increments).-1.000 to 1.000 (0.000)

Slope Adjuststhewhitelevel(in0.001increments).0.000 to 2.000 (1.000)

CDLBypass When"CDLBypass"issetto"On",youcantemporarilydisabletheCDLadjustmentresultandreturntotheimagequalitybeforeadjustment.Whentheimagequalityhasreturnedtothestatebeforeadjustment,youcannotadjustPower,Saturation,Offset,orSlope.On, Off

DetailSettings CDL Export:ExportsCDLparameters. CDL Preset: CDL 1 - CDL 15, All File Type: CCC, CDL ExecuteCDL Import:ImportsCDLparameters. Filename:Selectafilename. CDL Preset: CDL 1 - CDL 15 ExecuteCDL Preset Name:Youcanspecifythenameofpresetmodewithin16one-bytecharactersincludingalphabeticalcharacters,numbers,andsymbols.

AnchorCDL Youcantemporarilysaveparametersfor"Power","Saturation","Offset",and"Slope"andrecoverthevalues.(anchorpointsetting).

ResetCDL ResetsCDLparameters.

DetailSettings SetsdetailsforPictureMode.

BoostContrast

Youcanincreasethebrightness.On:1500to4000Off:0to1500

LUTImport LUTcanbeimportedexceptwhen"ACESproxy"isselectedfor"PictureMode"or"ACESproxy"isselectedfor"ColorGamut".Filename:Selectafilename.LUT Type (Gamma, Color Gamut):SelecttheLUTtype.Select LUT:SelectsUserLUT1-8.Base Color Gamut(SMPTE-C,EBU,ITU-RBT.709,AdobeRGB,DCI-P3,Native):SelectsthecolorgamutusedwhencreatingtheLUT(when"ColorGamut"under"LUTType"isselected).Execute:Performsimport.

LUTName YoucanspecifythenameofLUTwithinone-byte24charactersincludingalphabeticalcharacters,numbers,andsymbols.LUT Type (Gamma, Color Gamut):SelecttheLUTtype.Select LUT:SelectsUserLUT1-8.Input Name:InputtheLUTname.

40 OSD Menu


LUTDelete DeletesimportedLUT.LUT Type (Gamma, Color Gamut):SelecttheLUTtype.Select LUT:SelectsUserLUT1-8.Delete:DeletesLUT.

2020ConstantLuminance

Setsthecolormatrixconversionmethodtobeusedwhen"ITU-RBT.2020"isselectedfor"PictureMode".Constant Luminance:YUVsignalsarelinearlyconvertedandthenconvertedintoRGBsignals.Non-constant Luminance:YUVsignalsareconvertedintoRGBsignalswithoutchanginggamma0.45.

Note

• SD-SDIisfixedto"Non-constantLuminance".

2020GamutMapping

Setthisitemwhen"ITU-RBT.2020"isselectedfor"PictureMode"orwhen"User1-7"or"CanonLog"isselectedfor"PictureMode"andalso"ITU-RBT.2020"isselectedfor"ColorGamut".Gamut Mapping:MappingisperformedoncolorsoutsidethenativecolorgamutbyCanon's

uniquemethod.Clipping:Colorsoutsidethenativecolorgamutareclippedbyageneralmethod.

Calibration Performscalibrationbasedonsettargetvalueswhen"User1-7"isselectedfor"PictureMode".Luminance:Setsthetargetluminance. 48 to 150 (100) cd/m2

Color Temperature:Setsthetargetcolortemperature. D93, D65, D61, D60, D56, D50, DCI-P3:Selectfrompresetcolortemperatures. Custom (xy):YoucanadjustCIEx,yinincrementsof0.001. x: 0.260 to 0.360 (0.313)/y: 0.260 to 0.360 (0.329)Color Gamut:Setsthecolorgamut. SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3Gamma:Setsthetargetgamma. 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886Start:Performescalibration.

Note

• When"Luminance"issettohighbrightness,itmaybecalibratedbeyondthebrightnessadjustmentrangeandsetlowerthanthetargetvaluedependingonthe"ColorTemperature"setting.Inthatcase,setthe"Luminance"again.

CopyPictureMode

When"User1-7"isselectedfor"PictureMode",thecontentoftheselectedpicturemodeiscopied.Thefollowingmodescanbeselected:Picture Mode:SMPTE-C,EBU,ITU-RBT.709,ITU-RBT.2020,AdobeRGB,DCI-P3,User1-7(otherthanthecurrentlysetparameter)Execute:Performscopy.

PictureModeName

Youcanchangethenameof"User1-7"within16charactersincludingalphabeticalcharacters,numbers,andsymbols.

AnchorAdjustment Temporarilysavesparametersforadjusting"Contrast","Brightness","Chroma",and"Sharpness"andrecoverthevalues(anchorpointsetting).OK:Performsanchorpointsetting.Cancel:Returnstothepreviousscreenwithoutsettinganchorpoint.

Reset Return"PictureMode"tofactorydefault.Notethatin"User1-7"modewhereyouareperformingcalibration,thesettingreturnstothevalueaftercalibrationinsteadofthefactorydefault.Whenselected,themessage"ResetAdjustmentsettingstodefaults?"appears.OK:Performsreset.Cancel:Returnstothepreviousscreenwithoutresetting.

41OSD Menu

Thefactorydefaultsettingsforeach"PictureMode"isasfollows:

Item SMPTE-C EBUITU-R

BT. 709ITU-R

BT.2020AdobeRGB

Contrast 1000 1000 1000 1000 1000

Brightness 0 0 0 0 0

Chroma 1000 1000 1000 1000 1000

Sharpness 0 0 0 0 0

LocalDimming High High High High High

ColorTemperature

Preset D65 D65 D65 D65 D65

x 0.313 0.313 0.313 0.313 0.313

y 0.329 0.329 0.329 0.329 0.329

GainR/G/B 1023 1023 1023 1023 1023

BiasR/G/B 0 0 0 0 0

Gamma 2.2 2.35 2.2 2.2 2.2

ColorGamut SMPTE-C EBU ITU-RBT.709 ITU-RBT.2020 AdobeRGB

ColorRange Automatic Automatic Automatic Automatic Automatic

IDT – – – – –

ODT – – – – –

ODTSurround – – – – –

CDLPreset CDL1 CDL2 CDL3 CDL4 CDL5

BoostContrast Off Off Off Off Off

2020ConstantLuminance Non-constantLuminance

Non-constantLuminance




2020GamutMapping Mapping Mapping Mapping Mapping Mapping

42 OSD Menu

Item DCI-P3User1-7

Canon Log ACESproxy

Contrast 480 1000 1000 480

Brightness 0 0 0 0

Chroma 1000 1000 1000 1000

Sharpness 0 0 0 0

LocalDimming High High High High

ColorTemperature

Preset DCI-P3 D65 D65 D60

x 0.314 0.313 0.313 0.322

y 0.351 0.329 0.329 0.338

GainR/G/B 1023 1023 1023 1023

BiasR/G/B 0 0 0 0

Gamma 2.6 2.2 CanonLog –

ColorGamut DCI-P3 ITU-RBT.709 ITU-RBT.709 ACESproxy

ColorRange Automatic Automatic Automatic Automatic

IDT – – Automatic Automatic

ODT – – DCI-P3 DCI-P3

ODTSurround – – DarkSurround DarkSurround

CDLPreset CDL6 CDL7-13 CDL14 CDL15

BoostContrast Off Off Off Off

2020ConstantLuminance Non-constantLuminance




2020GamutMapping Mapping Mapping Mapping Mapping

43OSD Menu

Channel Settings

Thismenuisusedforinputrelatedsettings.Selectthe"SelectChannel"andchooseachannelnumberfromCH1toCH30.Finallydefinetheparameterofeachofthe"ChannelSettings".


SelectChannel Displaythechannelnumber.Inaddition,youcanassigneachcontentof"ChannelSettings"toeachchannel( 44).CH1toCH30

Note

• Itmaytake10secondswhenswitchingchannels.

InputConfiguration Selecttheinput.Factorydefaultdependonthechannel( 44).3G/HD-SDI, 3G-SDI RAW, SD-SDI, HDMI, — (Not set)

SelectInputSignal Setsthesignaldisplaymethod( 15).Automatic:"4KInput"and"SingleInput/DualInput"areautomaticallydetermined.4K Input:Displaysthesignaltransmittedoverfourinputs.

Single Input/Dual Input:Displaysthesignalofasingleinput(SingleInputA-D)ordualinput(DualInputA,BorC,D)ontothecenterofthescreen.

Note

• ForHDMI,thesettingisfixedto"Automatic".

• ForSD-SDI,only"SingleInputA-D"canbeselected.

• For"DualInput",only"3G-SDIRAW"canbeselected.

Format Setsthecolorformatandgradation.

• SDISignal

Automatic, 4:2:2 YCbCr 10-bit, 4:2:2 YCbCr 12-bit, 4:4:4 YCbCr 10-bit, 4:4:4 YCbCr 12-bit, 4:4:4 RGB 10-bit, 4:4:4 RGB 12-bit, 4:4:4 XYZ 10-bit, 4:4:4 XYZ 12-bit

• HDMISignal

Automatic, 4:4:4 XYZ 12/10-bit

Note

• HD/SD-SDIisfixedto"4:2:2YCbCr10-bit".

• For"3G-SDIRAW",thesettingisfixedto"Automatic".

• Ifsetto"Automatic"whenreceiving3G-SDI,allsignalswithoutapayloadformatwillberenderedin"4:4:4RGB10-bit".Inaddition,ifthereisonePayloadormoreofthefourinputs,theyarerenderedinaPayloadthatisselectedintheorderofpriorityA→B→C→Dinthedisplayarea.

• Touse4:4:4XYZ10-bitforSDIsignals,select"4:4:4XYZ10-bit".Then,signalswillbeprocessedassignalswhereXYZdataisincludedinRGBdataoutputin4:4:4RGB10-bitformat.

44 OSD Menu


InternalSync Synchronizesfourinputsfor"4KInput".On:Forcesynchronization.Off:Donotforcesynchronization.

ChannelName Setsthenameoftheselectedchannel.Youcaninputupto16alphanumericcharacters.

PictureMode Setsthe"PictureMode".

ColorRange SetsthequantizationrangeforSDIandHDMIrespectively.Automatic:Setstherangebasedonsignalinformationautomatically.Full (0-255):SetstoBlacklevel:0;Whitelevel:1023(10-bit)/4095(12-bit).Limited 1 (16-235):Limitstheblackandwhiterange.

Blacklevel:64(10-bit)/256(12-bit)Whitelevel:940(10-bit)/3760(12-bit)

Limited 2 (16-255):Limitstheblackrange.Blacklevel:64(10-bit)/256(12-bit)Whitelevel:1023(10-bit)/4095(12-bit)

Note

• Settingisdisabledwhen"ACESproxy"isselectedfor"PictureMode"or"ACESproxy"isselectedfor"ColorGamut".

• Operationswhen"Automatic"isselectedaredescribedbelow.- WhenHDMIisselected,"Full(0-255)"or"Limited1(16-235)"issetautomaticallydependingonHDMIsignalinformation.

- When"DCI-P3"isselectedfor"PictureMode",or"DCI-P3","CinemaGamuttoDCI"or"DCI-P3+toDCI"isselectedfor"ColorGamut","Full(0-255)"isset.

- When"CanonLog"or"CanonLog2"isselectedfor"Gamma","Limited2(16-255)"isset.- "Limited1(16-235)"issetintheothercases.

Thefactorydefaultsettingsforeachchannelisshowninthefollowingtable.

CH CH1 CH2 CH3 CH4 to CH30

InputConfiguration 3G/HD-SDI HDMI 3G-SDIRAW –

SelectInputSignal Automatic Automatic Automatic Automatic

Format Automatic Automatic Automatic Automatic

InternalSync Off Off Off Off

ChannelName (Blank) (Blank) (Blank) (Blank)

PictureMode ITU-RBT.709 ITU-RBT.709 CanonLog ITU-RBT.709

ColorRange Automatic Automatic Automatic Automatic

–:notset

45OSD Menu

Display Settings

Thismenuisusedtoconfigurethedisplaymethod.


ScreenScaling Defineshowthevideoisscaledanddisplayedonthescreen.Native Input Resolution:Displaystheinputsignalwithoutscaling.

1920x1080(original)

200%:Doublestheverticalandhorizontaldimensions.

1920x1080→3840x2160

Automatic:Enlargestofullscreen.

1920x1080→3840x2160

Note

• When"Peaking"or"FalseColor"is"On",themagnificationisupto200%,evenif"Automatic"isselected.

Zoom Whentheresolutionis4096x2160or3840x2160,theenlargedimageisdisplayedatthecenterofthescreenoratthepositionselectedscreenofa4-screenlayout.Center, Top Left, Top Right, Bottom Left, Bottom Right, Off

Center

RightTopLeftTop

LeftBottom RightBottom

Note

• WhenHDMIisselected,only"Center"and"Off"canbeselected.

46 OSD Menu


ScalingMethod Setstheinterpolationmethodwhen"ScreenScaling"issetto"200%"or"Automatic".Shape Trace:Canonoriginalprocessingthatproducessmoothslopeswithreducedjaggedlines.

Bicubic:Generalinterpolationprocessthatusesneighboringpixelinformationtocreateinterpolatedpixels.

Nearest Neighbor:Processthatusesnearestneighborpixelinformationtocreate(copy)newpixels.Thisisusefulasitenlargestheoriginalpixels,thusmakinganyjaggedlinesvisible.

FrameHold Pausesthevideo.On, Off

Note

• Settingisdisabledwhen"Peaking"issetto"On"or"FalseColor"issetto"On".

BackgroundColor Setsthecoloroftheblackbandtochecktheboundaryoftheblackbandandvideoimage.White, Gray, Off

I/PsF DefineshowtheinterlacesignalorPsFsignalisdisplayed.Automatic:Automaticallydeterminedbasedonpayloadanddisplayed.Ifthereisnopayload,thesignalisdisplayedasaninterlacesignal.Interlace:Displayedasaninterlacesignal.PsF:DisplayedasaPsFsignal.

I/PConversion SetstheinterlacedsignalI/Pconversionmethod.Image Priority:Thismodegivesprioritytoimagequality.Processingtimewillbelongerthan"SpeedPriority".Speed Priority:Thismodegivesprioritytospeed.

PsF DefineshowthePsFsignalisdisplayed.Progressive:Interpolatesgivingpreferencetoimagequalitybydetectingpairedfields.Interlace:Interpolatesusingtwoadjacentfieldsgivingprioritytospeed.

47OSD Menu


FilmCadence Setsthefilmcadencemode( 82).2-2:Displaysprogressiveimageafterconversionfor2-2pulldownprocessedinterlacedsignalinput.2-3:Displaysprogressiveimageafterconversionfor2-3pulldownprocessedinterlacedsignalinput.2-3-3-2:Displaysprogressiveimageafterconversionfor2-3-3-2pulldownprocessedinterlacedsignalinput.Off:Doesnotperformfilmcadencemodeprogressiveconversion.

Note

• Thiscanbesetonlywhen"I/PConversion"issetto"ImagePriority".

48 OSD Menu

Audio Settings

Thismenuisusedtosetaudiooutputfromtheheadphoneterminal.


AudioSettings Setstheheadphoneterminalaudio.

SDIGroup SwitchestheaudiogrouptobeinputduringSDIaudioinput.CH1-CH8, CH9-CH16

CHL/R(SDI) Setstheaudiotobeoutputfromthetwochannels(L/R)oftheheadphonerespectively.Theoptionsdifferaccordingtothe"SDIGroup"setting.When"CH1-CH8"isselectedfor"SDIGroup":CH1-CH8When"CH9-CH16"isselectedfor"SDIGroup":CH9-CH16

CHL/R(HDMI) Setstheaudiotobeoutputfromthetwochannels(L/R)oftheheadphonerespectively.CH1-CH8

Volume Setsthevolume.0 to 100 (30)

AudioSwitch Setsthestereooutput.L R, L, R, MIX (L+R)

SelectInput Setstheaudioterminaltobeusedwhen"4KInput"isselected.Single Input A-D (Input A)

49OSD Menu

Marker Settings

Thismenuisusedtoconfigurevariousmarkers.


MarkerPreset Customizesmarkerswhichareassignedtomarkers1to5.Marker 1to5, Off

AspectMarker "AspectMarker"displaysarangeinaccordancewiththespecifiedaspectratio.

Note

"AspectMarker"isnotdisplayedinthefollowingcases:

• Whenthereisnosignal,unsupportedsignal,orachannelwith"InputConfiguration"notsetisselected

• Whenanenlargedimageisdisplayed

• Duringtheexecutionof"PlaybackFile"under"ScreenCapture"

• Whena"TestPattern"isdisplayed

Enable SwitchestheaspectmarkerOn,Off.On,Off

Mask Switchesthemaskcolor.Maskistheblankingareaoutsidetherangeofthemarker.Black:

Half (50% gray):

Off:Turnsmaskoff.

AspectRatio Setstheaspectratiooftheaspectmarker.16:9, 15:9, 14:9, 13:9, 4:3, 2.39:1, 2.35:1, 1.896:1, 1.85:1, 1.66:1, VariableTheaspectratiocanbeenteredasanumericvaluewhenyouselect"Variable"(0.01:1increments).Thegrayedoutsliderbecomesactiveandcanbeusedtosettheaspectratio.1.00:1to3.00:1(1.78:1)

Line Activewhen"Black"or"Half"isselectedfor"Mask".SwitcheslinesonmaskOn,Off.On, Off

LineWidth Setsthethicknessoftheaspectmarkerline.Thick, Normal, Thin

50 OSD Menu


LineColor Setsthecoloroftheaspectmarkerline.White, Red, Green, Blue, Yellow, Cyan, Magenta

LineBrightness

Setsthebrightnessoftheaspectmarkerline.High, Low

HPosition Changeshorizontalpositionwithoutchangingtheaspect.-65to65 (0)

VPosition Changesverticalpositionwithoutchangingtheaspect.-35to35 (0)

SafetyZoneMarker1,2 Therearetwotypesof"SafetyZoneMarker":1and2,whichsharethesamesettings.Asafetyzonemarkerisusedtosetthesafezoneoftheimage(actualdisplayedarea)tochecktheimage.

Note

"SafetyZoneMarker"isnotdisplayedinthefollowingcases:





Enable SwitchesthesafetyzonemarkerOn,Off.On,Off

AspectRatio Setstheaspectratioofthesafetyzonemarker.16:9, 15:9, 14:9, 13:9, 4:3, 2.39:1, 2.35:1, 1.896:1, 1.85:1, 1.66:1, VariableTheaspectratiocanbeenteredasanumericvaluewhenyouselect"Variable"(0.01:1increments).Thegrayedoutsliderbecomesactiveandcanbeusedtosettheaspectratio.1.00:1to3.00:1(1.78:1)

Note

• When"AreaSize"issetto"Variable(dot)",youcannotselect"AspectRatio".

AreaSize Setsthesafetyzonemarkerareasize.80%, 88%, 90%, 93%, Variable (%), Variable (dot)When"Variable(%)"isselected,thegrayedout"Rate(%)"becomesactive.When"Variable(dot)"isselected,thegrayedout"Width(dot)"and"Height(dot)"becomeactive.Thiscanbesetbymovingtheslider.

Rate(%) Becomesactivewhenyouselect"Variable(%)"underthemenu"AreaSize".Movetheslidertosetthedisplayedmarkerareasizewithoutchangingtheaspectratioin1%increments.50to100 (80)

Width(dot) Becomesactivewhenyouselect"Variable(dot)"underthemenu"AreaSize".Movetheslidertosettheareawidthin2dotincrement.360to4096 (3276)

Height(dot) Becomesactivewhenyouselect"Variable(dot)"underthemenu"AreaSize".Movetheslidertosettheareaheightin2dotincrement.240to2160 (1728)

51OSD Menu


Shape Setstheareashapeofthesafetyzonemarker.Box:

Bracket:

Enclosure:

LineWidth Setsthewidthofthesafetyzonemarkerline.Thick, Normal, Thin

LineColor Setsthecolorofthesafetyzonemarkerline.White, Red, Green, Blue, Yellow, Cyan, Magenta

LineBrightness

Setsthebrightnessofthesafetyzonemarkerline.High, Low

HPosition Adjuststhemarkerhorizontalpositionwiththesetaspectandsize.-65to65 (0)

VPosition Adjuststhemarkerverticalpositionwiththesetaspectandsize.-35to35 (0)

52 OSD Menu


AreaMarker "AreaMarker"isusedtocheckaspecificareausingarectangularbox.

Note

"AreaMarker"isnotdisplayedinthefollowingcases:





Enable SwitchestheareamarkerOn,Off.On, Off

HPosition Setsthestartposition(x-coordinate)todrawtherectangle(inincrementsof2).0 to 4086 (240)

VPosition Setsthestartposition(y-coordinate)todrawtherectangle(inincrementsof2).0 to 2150 (120)

Width(dot) Setsthewidthoftherectangle(inincrementsof2).10 to 4096 (240)

Height(dot) Setstheheightoftherectangle(inincrementsof2).10 to 2160 (120)

Mask Switchesthemaskcolor(inthemarker).Black,Half,Off

Line TurnsOn/Offtheoutlinesoftherectangularbox.On,Off

LineWidth Setsthewidthoftheareamarkerline.Thick, Normal, Thin

LineColor Setsthecoloroftheareamarkerline.White, Red, Green, Blue, Yellow, Cyan, Magenta

LineBrightness

Setsthebrightnessoftheareamarkerline.High, Low

53OSD Menu


CenterMarker "CenterMarker"showsthecenteroftheimage.

Note

• "CenterMarker"isnotdisplayedwhenanenlargedimageisdisplayed.

Enable SwitchesthecentermarkerOn,Off.On, Off

Size Setsthesizeofthecentermarker.Large, Small

LineWidth Setsthewidthofthecentermarkerline.Thick, Normal, Thin

LineColor Setsthecolorofthecentermarkerline.White, Red, Green, Blue, Yellow, Cyan, Magenta

LineBrightness

Setsthebrightnessofthecentermarkerline.High, Low

GridMarker "GridMarker"ismarkerusedtocheckthehorizontalandverticalposition.

Note

• "GridMarker"isnotdisplayedwhenanenlargedimageisdisplayed.

Enable SwitchesthegridmarkerOn,Off.On, Off

Distance Setsthehorizontalandverticallinedistance.160 dots, 240 dots, 320 dots

LineWidth Setsthewidthofthegridmarkerline.Thick, Normal, Thin

LineColor Setsthecolorofthegridmarkerline.White, Red, Green, Blue, Yellow, Cyan, Magenta

LineBrightness

Setsthebrightnessofthegridmarkerline.High, Low

54 OSD Menu

Function Settings

ThismenuisusedtosetfunctionstolinkwithCinemaEOSSystemcamerasandvideoassistancefunctions.


Peaking CustomizespeakingswhichareassignedtoPeaking1orPeaking2.Theoutlineisdisplayedinacolor,usedtocheckthefocus.

Note

• "Peaking"cannotbedisplayedduringtheexecutionof"PlaybackFile"under"ScreenCapture".

Enable SwitchesthepeakingdisplaymodeandalsosetspeakingtoOff.Peaking 1, Peaking 2, Off

Peaking1,2Monochrome:Displaysvideoinmonochrome.On, OffFrequency:Setsthecentralfrequencyofcontourenhancementsignals.Peaking 1 (High, Middle, Low), Peaking 2 (High, Middle, Low)Range:Setsthewidthoftherangetobecolored. -3 ~ +3 (0)Color:Setsthecolortobeused.White, Red, Green, Blue, Yellow, Cyan, Magenta

FalseColor Whensetto"On",differentcolorsaredisplayedaccordingtovideo'sbrightnesslevelsothatyoucanchecktheexposureconditioneasily.On, OffBelowaredetailsofthechart.NumbersindicatethelevelofY-signals.

RedOrangeLightorangeYellowLightgrayMediumgrayDarkgrayBlueBluepurpleLightpurplePurple

102394087681274858341925519112763

941877813749584420256192128640

Note

• "FalseColor"cannotbedisplayedduringtheexecutionof"PlaybackFile"under"ScreenCapture".

ScreenCapture Capturesthescreen.

Capture Capturesthescreen.Thedataissavedunderthename"YYYYMMDD_hhmmss.bmp"intherootfolderoftheUSBmemory.

FrameHold Pausesthevideo.On, Off

CaptureSource

Selectsthesourcestocapture.All:Everythingiscapturedincludingvideoassistancefunctionssuchasmarkersandwaveform

monitoraswellasOSDmenu.Video:Onlyvideosignalsarecaptured.

55OSD Menu


PlaybackFile Playsbackcapturedimages.Select File:Selectsafile.Execute:Playsbacktheimage.

Note

• WhenplayingbackcapturedimagesonotherDP-V2410orPC,colormaynotbeplayedbackprecisely.

FinishPlaybackFile

Finishesplayback.

TimeCode DisplaythetimecodesuperimposedontheSDIsignal.

VITC 01:23:45.05

Note

• "TimeCode"cannotbedisplayedwhen"FrameHold"is"On",duringtheexecutionof"PlaybackFile"under"ScreenCapture",orwhen"TestPattern"isdisplayed.

Enable SwitchesthetimecodedisplayOn,Off.On, Off

Type Selectsthetype.VITC, LTC

Size Selectsthesize.Large, Small

Position Selectsthedisplayposition.Top Left, Top Right, Bottom Left, Bottom Right

WaveFormMonitor Configuresvarioussettingsforthewaveformmonitor.Onthewaveformmonitor,thehorizontalaxisshowsthehorizontalresolutionofthevideoandtheverticallineshowsthesignallevel.

254

4%0%

50 %

100 %

0

Signallevel

Horizontalresolutionofvideo

Note

• When"FrameHold","Peaking"or"FalseColor"is"On","WaveFormMonitor"cannotbedisplayed.

• "WaveFormMonitor"cannotbedisplayedduringtheexecutionof"PlaybackFile"under"ScreenCapture",orwhen"TestPattern"isdisplayed.

• When"WaveFormMonitor"is"On","VectorScope"is"Off".

Enable SwitchesthewaveformmonitorOn,Off.On, Off

SelectSignal Setsthewaveformtobedisplayed.Y, Cb, Cr, R, G, B

56 OSD Menu


DisplayType Setsthedisplaytype.When"Line"isselected,dataforonelineisdisplayed.All, LineSelectsthelinetobedisplayedwhen"Line"isselected. Select Line: 1 to 2160

Position Selectsthedisplayposition.Bottom Left, Bottom Right

Guide Aguideisdisplayedatthespecifiedposition."Guide"isnotdisplayedwhen"255"isselected.1 to 255

StandardLevelHigh

Setsthestandarddisplaylevel(high)."StandardLevelHigh"isnotdisplayedwhen"255"isselected.190 to 255

StandardLevelLow

Setsthestandarddisplaylevel(low)."StandardLevelLow"isnotdisplayedwhen"0"isselected.0 to 64

Color Setsthesignalstobedisplayedandthecolorofsignalsexceedingthestandardlevel.Y, Cb, Cr, R, G, B:Selectsthesignal.Selectsthecoloroftheselectedsignal.White, Red, Green, Blue, Yellow, Cyan, MagentaDefaultvalueofeachsignalisshownbelow.Y(White),Cb(White),Cr(White),R(Red),G(Green),B(Blue)Standard Level High, Standard Level Low:Selectsthestandardlevel.White, Red, Green, Blue, Yellow, Cyan, MagentaDefaultvalueofeachstandardlevelisshownbelow.StandardLevelHigh(Magenta),StandardLevelLow(Cyan)

VectorScope Configuresvarioussettingsforthevectorscope.VectorscopedisplaystheintensityofcolorsignalsandhuewiththehorizontalaxisshowingthecolordifferencesignalCbandtheverticallineshowingCr.

Red

Green

Yellow Blue

Cyan

Magenta

(Cb,Cr)=(255,255)

(Cb,Cr)=(0,0)

Cr

Cb

Note

• When"FrameHold","Peaking"or"FalseColor"is"On","VectorScope"cannotbedisplayed.

• "VectorScope"cannotbedisplayedduringtheexecutionof"PlaybackFile"under"ScreenCapture",orwhen"TestPattern"isdisplayed.

• When"VectorScope"is"On","WaveFormMonitor"is"Off".

Enable SwitchesthevectorscopeOn,Off.On, Off

Target Setsthetarget.75%, 100%

Position Selectsthedisplayposition.Bottom Left, Bottom Right

57OSD Menu


AudioLevelMeter Configuresvarioussettingsfortheaudiolevelmeter.Displaystheaudioleveloftheselectedchannelnumber.

Note

• "AudioLevelMeter"cannotbedisplayedwhen"FrameHold"is"On",duringtheexecutionof"PlaybackFile"under"ScreenCapture",orwhen"TestPattern"isdisplayed.

Enable SwitchestheaudiolevelmeterOn,Off.On,Off

ChannelNumber(SDI)

SetsthenumberofchannelsdisplayedwhenSDIsignalisinput.Optionschangeaccordingtothesettingfor"SDIGroup"under"AudioSettings".When"CH1-CH8"isselectedfor"SDIGroup":2CH (CH1-CH2), 4CH (CH1-CH4),

6CH (CH1-CH6), 8CH (CH1-CH8)When"CH9-CH16"isselectedfor"SDIGroup":2CH (CH9-CH10), 4CH (CH9-CH12),

6CH (CH9-CH14), 8CH (CH9-CH16)

ChannelNumber(HDMI)

SetsthenumberofchannelsdisplayedwhenHDMIsignalisinput.2CH (CH1-CH2), 4CH (CH1-CH4), 6CH (CH1-CH6), 8CH (CH1-CH8)

PeakHold Whensetto"On",onesecondofaudiosignalatthepeakiskept.On, Off

StandardLevel

Setsthestandardlevel.-40 to 0 (-20)

TestPattern Setsthetestpatternbuiltintothemainunit.White, Gray (20%), Black, Red, Green, Blue, Ramp, 5 Step, Color Bars, PLUGE, Off

Note

• Ifthepoweristurnedoffonceandthenbackon,thetestpatternwillnotbedisplayed.

• Thetestpatternwillbeerasedinthefollowingcases:-Whencalibrationhasbeenstarted-WhenthechannelischangedusingtheCHbutton,FbuttonassignedforChannelUP/ChannelDOWN,or"SelectChannel"under"ChannelSettings"

-Whenchanging"InputConfiguration"or"SelectInputSignal"under"ChannelSettings"-When"ResetAllSettings"isexecuted

58 OSD Menu


VariousFunction Displaysthefunctionlisttoexecutefunctions.Monochrome (On, Off), Blue Only (On, Off), Red Off (On, Off), Green Off (On, Off), Blue Off (On, Off), Banner (On, Off)*1, Function Guide (On, Off)*2, OSD Position (Mode 1, Mode 2)*3, OSD Size (Large, Small)*4, Backlight Scan (High, Low, Off)

*1BannerWhen"Banner"issetto"Off",thebannerisdisplayedonlywhenyoupressthejogdialwhileOSDisclosed.*2Function GuideOn:YoucandisplaythelistoffunctionsassignedtoanFbuttononthevideodisplaybypressingthe

jogdialwhileOSDisclosed.Off:Functionguideisnotdisplayed.*3OSD PositionMode 1 (4096x2160):OSDisdisplayedina4096x2160area.Mode 2 (3840x2160):OSDisdisplayedina3840x2160area.*4OSD Size:ThesizeoftheOSDmenucanbeselectedfrom"Large"and"Small".

CameraLink SetsthefunctionstolinkwithCinemaEOSSystemcameras.

Adjustment Setswhetherornottolinktothecamera'simagequalitysettingwhen"CanonLog"isselectedfor"PictureMode".On, OffWhen"ColorGamut/Gamma","ColorTemperature",and"ColorRange"areallsetto"On",thefollowingsettingsareconfigured.

ParameterofCinemaEOSSystemandDP-V2410

CinemaEOSSystem DP-V2410

ColorSpace

Gamma ColorGamut GammaColor

TemperatureColorRange

BT.709 CanonLog

ITU-RBT.709 CanonLog D65 Automatic

BT.2020 ITU-RBT.2020 D65

CinemaGamut

CinemaGamutto709 D65

CinemaGamuttoDCI-P3 DCI-P3

DCI-P3+ DCI-P3+to709 D65

DCI-P3+toDCI-P3 DCI-P3

BT.2020 CanonLog2

ITU-RBT.2020 CanonLog2 D65

CinemaGamut

CinemaGamutto709 D65

CinemaGamuttoDCI-P3 DCI-P3

59OSD Menu


ColorGamut/Gamma

Theimagequalityofthedisplaycorrespondstothegammaandcolorgamutofthecamera.On, Off

ColorTemperature

Theimagequalityofthedisplaycorrespondstothecolortemperatureofthecamera.On, Off

ColorRange

Theimagequalityofthedisplaycorrespondstotherangeofthecamera.On, Off

DisplayColorGamut

Setsthecolorgamutshownonthedisplaywhenthecamera's"ColorSpace"issetto"CinemaGamut"or"DCI-P3+".ITU-R BT.709, DCI-P3

Fan Setswhetherornottostopthefanbylinkingwiththecamera'sRECsignal.Set"FanControl"under"SystemSettings"to"On".On, Off

Note

• Whensetto"On",targetstobelinkedareRECsignalsthatarecompatiblewiththisvideodisplay(SDIorHDMIsignalsofCinemaEOSSystemcamerasandCanonprofessional-usevideocameras).

• Ataroomtemperature(25˚C),thefanremainsoffforapproximatelyoneminutewhentheACpowersupplyisusedandtenminuteswhentheDCpowersupplyisused.Selectthetypeofpowersupplyaccordingtothepurposes.

• Ifthetemperatureinsidethemainunitincreaseswhilethefanisoff,themessage"Fanwillberotatedasthetemperatureishigh."isdisplayedandthefanstartsrotatingapproximatelytensecondslater.Sincethetemperatureofthemainunithasincreased,thefanrotatesfasterthanusual.

• Thevideodisplay'sfanmaystartrotatingearlierthanthecamerabecausethetemperatureinsidethemainunithasincreased.

• Thefanmaynotstopinsomeconditions,forexamplewhenusedatahightemperature.

CameraInformation

Setsconditionstodisplaycamerainformation.Automatic:Camerainformationisdisplayedfor4secondswhentheinformationhaschanged.On:Camerainformationisalwaysdisplayed.Off:Camerainformationisnotdisplayed.

60 OSD Menu

System Settings

Thismenuisusedtoconfiguresettingsrelatedthesystemofthevideodisplay.


Network Configuressettingsforthenetworkofthevideodisplay.

ConfigureanIPAddress

Automatic:ConfiguresanIPaddressautomaticallywithDHCP/AutomaticIP.Manual:ConfigureanIPaddressandsubnetmaskmanually.

Display 192.168.0.1

SubnetMask 255.255.255.0

Language SetsthelanguageoftheOSDmenuandmessages.English, ,

Function/ChannelButton SetsthefunctionorchanneltoassigntotheFbuttonsorCHbutton.

DisplayFunction/DisplayFunction(CDL)

SetsthefunctiontoassigntotheFbuttonsofthemainunit.SelectanFbuttonandassignafunctionfromthefollowinglist.ThefactorydefaultsforthemainunitFbuttonsisasfollow:Normalmode

F1:ContrastF2:BrightnessF3:Time Code (On, Off)F4:WFM/VEC (On, Off)F5:Audio Level Meter (On, Off)F6:Zoom (On, Off)F7:Hide OSD (On, Off)F8:Boost Contrast (On, Off)

CDLmodeF1:CDL R (On, Off)F2:CDL G (On, Off)F3:CDL B (On, Off)F4:CDL Power (On, Off)F5:CDL Offset (On, Off)F6:CDL Slope (On, Off)F7:CDL Saturation (On, Off)F8:CDL Bypass (On, Off)

Note

• Whenthe"BacklightControl"settingisswitchedusinganFbutton,theinformationisappliedto"BacklightControl"in"PictureMode".

• When"HideOSD"issetto"On",noOSDisdisplayed.AlthoughoperationcanbeperformedevenwhenOSDishidden,OSDfortheoperationisnotdisplayed.

61OSD Menu


DisplayFunction/DisplayFunction(CDL)

Thefollowingfunctionscanalsobeassigned:

Adjustment Picture Mode (SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3, User 1-7, Canon Log, ACESproxy)Chroma, Sharpness

Backlight Control (Local Dimming (High/Low), Global Dimming, Off)

Color Gamut (SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3, Native, Cinema Gamut to 709, Cinema Gamut to 2020, Cinema Gamut to DCI, DCI-P3+ to 709, DCI-P3+ to DCI, DCI-P3 to 709, ITU-R BT.2020 to 709, ACESproxy, User LUT 1-8)Gamma (2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, Canon Log, Canon Log (HDR), Canon Log 2, Canon Log 2 (HDR), SMPTE ST 2084, User LUT 1-8)HDR Range

CDL CDL Preset

CDL SOP/Sat

ChannelSettings Channel UP

Channel DOWN

Select Input Signal (Automatic, 4K Input, Single Input/Dual Input)

DisplaySettings Screen Scaling (Native Input Resolution, 200%, Automatic)

Frame Hold (On, Off)

Background Color (White, Gray, Off)

AudioSettings SDI Group (CH1-CH8, CH9-CH16)

CH L

CH R

Volume

Audio Switch (L R, L, R, MIX(L+R))

Select Input (Single Input A-D)

MarkerSettings Marker Preset (Marker 1-5, Off)

Aspect Marker (On, Off)

Safety Zone Marker 1, 2 (On, Off)

Area Marker (On, Off)

Center Marker (On, Off)

Grid Marker (On, Off)

62 OSD Menu


Display Function/Display Function (CDL)

Function Settings Peaking (Peaking 1, Peaking 2, Off)

Peaking 1 (Peaking 1, Off)

Peaking 2 (Peaking 2, Off)

False Color (On, Off)

Capture

Wave Form Monitor (On, Off)

WFM Select Signal (On (Y, Cb, Cr, R, G, B), Off)

Vector Scope (On, Off)

Monochrome/Blue Only/Red Off/Green Off/Blue Off (On, Off)

Backlight Scan (High, Low, Off)

Camera Information (Automatic, On, Off)

System Settings Fan Stop (On, Off)

Note

•When changing channels with "Channel UP/DOWN", the channels with "Input Configuration" ( 43) set to "–" are skipped.

•When the "Backlight Control" setting is switched using an F button, the information is applied to "Backlight Control" in "Picture Mode". Likewise, when any marker settings are changed, those changes will be applied to "Enable" under the currently selected "Marker Preset".

Display Channel Sets the channel to assign to the CH button on the display.Select a CH button and register a channel number. A list of settings under the menu "Channel Settings" ( 43) is displayed.

Display Name Sets the name of the main unit. You can input up to 16 alphanumeric characters.

Date/Time Sets the year/month/date/hour/minute.

Power Indicator Brightness Adjusts the brightness of the power indicator on the main unit. The greater the number is, the greater the brightness.Off, 1 to 5 (3)

Display Button LED Sets the F buttons and the lamp on the face.On, Off

Compatible Settings Sets the connection compatibility with HDMI equipment.Normal: All formats are supported.Compatible: Set this option when video is not played correctly in "Normal". "4K50.00P/60.00P" is

not supported when this option is selected.

Firmware Update This function is used to update the video display firmware. Refer to the Canon website for detailed information.

63OSD Menu


ProtectSettings Locksthesettingssotheycannotbechanged.WhenyoupresstheMENUbutton,"Signal/SystemInformation"appears,butotheroperationsaregrayedoutbecausetheyarelocked.

Password Setapasswordtoprotectsettings.Useafour-digitnumber(0000to9999).

ProtectTarget Selectsthetargettobeprotected.Picture Mode:Select"On"toprotector"Off"toexcludesettingsfor"PictureMode".

On, OffSelect Channel:Select"On"toprotector"Off"toexcludesettingsfor"SelectChannel".

On, Off

Protect Select"OK"toprotect.Whenapasswordhasbeenset,enterthepasswordandselect"OK".

• UnlockingProtectSettings

Movetheselectionframeto"ProtectSettings"andpresstheSETbuttonforapproximately3seconds.Whenapasswordhasbeenset,enterthepasswordandselect"OK".

FanSettings Setstheoperationofinternalfan.

FanControl Makesthefanrotatefasterbeforestoppinginordertopreventtheinternaltemperaturefromincreasing,whenthefanisstoppedmanually.On, Off

FanStop Thefancanbestoppedmanuallywhen"FanControl"issetto"On".Thefannoisecanbemadesilentwhenthevideodisplayisusedduringshootingorwhensilenceisnecessary.On, Off

Note

• Ifthemessage"Invalidoperationduetohightemperature."isdisplayed,thefancannotbestoppedevenwhen"On"isselectedforthisitem.Waituntiltheinternaltemperaturelowers.

• Ataroomtemperature(25˚C),thefanremainsoffforapproximatelyoneminutewhentheACpowersupplyisusedandtenminuteswhentheDCpowersupplyisused.Selectthetypeofpowersupplyaccordingtothepurposes.

• Ifthetemperatureinsidethemainunitincreaseswhilethefanisoff,themessage"Fanwillberotatedasthetemperatureishigh."isdisplayedandthefanstartsrotatingapproximatelytensecondslater.Sincethetemperatureofthemainunithasincreased,thefanrotatesfasterthanusual.

• Select"Off"torestartthefan.Thefanrotatesfasterthanusual.

• Thefanmaynotstopinsomeconditions,forexamplewhenusedatahightemperature.

64 OSD Menu


Export/Import Setstheexport/importmainmenusettings.

Note

• Thefollowingsettingscannotbeexportedorimported.Thisisalsotruewhen"All"isselected.-"Calibration"under"Adjustment"(includingcalibrationresults)-"Zoom"and"FrameHold"under"DisplaySettings"-"TestPattern"and"Monochrome/BlueOnly/RedOff/GreenOff/BlueOff"under"FunctionSettings”,"FrameHold"under"ScreenCapture"

-"Date/Time","FanStop","Export/Import"and"PoweronSetting"under"SystemSettings"

• DataexportedfromthisvideodisplaycannotbeimportedtootherCanonvideodisplaysexceptDP-V2410.

Export Target:Selecttheexportdestination.USB:ExporttoaUSBmemoryUser 1-3:Exporttothebuilt-inmemoryofthemainunit

Filename:Factorydefaultis"dinfo_dpv2410.dat".YoucanchangethenameofthefiletobeexportedtotheUSBmemorywithin16one-bytecharactersincludingalphabeticalcharacters,numbers,andsymbols.

Execute:Performsexport.

Import Target:Specifythedestinationtosavethefiletobeimported.USB, User 1-3

Filename:Displaysfileswiththeextension".dat"soyoucanselectfromamongthem.Settings (All, Adjustment, Channel Settings, Display Settings, Audio Settings, Marker Settings, Function Settings, System Settings):Selectthesettingstoimport.Execute:Performsimport.

PoweronSetting Youcanselectthestateofthedisplaywhenthepoweristurnedon.Last memory:Thevideodisplaystartsupwiththesettingslastused.User 1-3:Itstartsupwiththesettingssavedin"User1-3"under"Export".

ResetAllSettings Returnsallsettingstofactorydefault.Whenselected,themessage"Resetallsettingstofactorydefaults?"appears.OK:Performsreset.Cancel:Returnstothepreviousscreenwithoutresetting.

65OSD Menu

Signal Information

Showsthesignalinformation.When"SelectInputSignal"is"4KInput",informationfortheentiresignalandeachinputisdisplayed.Selectasignalwiththejogdialaccordingtotheguideattoprightcornerofthemenu.Whensignalinformationhasbeenobtainedalthoughitisnotdisplayedonthescreen,thecontentoftheinformationisgrayedout.

SDI Signal HDMI Signal

Item Display Example Item Display Example

ChannelInputConfiguration

SelectInputSignalFormatResolutionPictureRate,I/P/PsF*SDIPayloadIDVideoStandardSamplingStructureBitDepthPictureRateScanningMethod

LinkNumber

CH13G/HD/SD-SDI(3G-SDILevelA)4KInputAutomatic4096x216024.00P89C346013G-SDI4:4:4:4GBRA10-bit24.00Progressive/Progressive(Transport/Picture)Single/Link_1

ChannelInputConfigurationSelectInputSignalResolutionPictureRate,I/P/PsFPixelEncodingColorDepthMatrixRGBRange

CH4HDMIAutomatic4096x216060.00P4:2:2YCbCr10-bitITU-RBT.709Full

*Whenacontentisgrayedout,anasterisk"*"maybedisplayedindicatinglow"PictureRate"accuracysuchas"24.00P*".

System Information

Showsthevideodisplaystatusandnetworkinformation.

Item Display Example

Display DP-V2410

SerialNo. 000000000000

FirmwareVer. 1.0.0

UsageTime* 5h

IPAddress 192.168.0.1

SubnetMask 255.255.255.0

MACAddress FF:FF:FF:FF:FF:FF

*The"UsageTime"isnotalways"0"whenyoupurchasethedisplayduetofactoryinspection.

66 Main specifications/Performance

Main specifications/Performance

Panel

PanelType IPSLCDpanel

ScreenSize 24inch(61.1cm)

AspectRatio 17:9

Resolution 4096x2160(8.8megapixels)

ActiveDisplayArea Approximately540.7x285.1mm

PixelPitch 132µm/193ppi

PanelDriver 1024gradations,10-bitforeachRGBcolor

Image quality

Brightness(Standard) 100cd/m2

ViewAngle(Up,Down,Left,Right) 89°(contrastratio10:1orhigher)

SurfaceTreatment Anti-glarecoating

General

BacklightType RGBLED,directdowntype

Power RatedVoltage:100–240VACRatedFrequency:50/60Hz24V–28VDCMax.8.9A,XLRterminal

Powerconsumption Atmaximumload(includingchangeinbrightnessthroughaging):Approximately210WAtfactoryshipment:Approximately160W

EnvironmentalConditions

Operating Temperatureandhumidity:0–40°C(32–104°F),20–85%RH(nocondensation)recommended:15–30°C(59–86°F)

Pressure:700–1060hPa

Storage/Transporting

Temperatureandhumidity:-20–40˚C(-4–104°F),20–85%RH(nocondensation)41–60˚C(105–140°F),20–30%RH(nocondensation)

Pressure:700–1060hPa

Dimensions(widthxheightxdepth) Includingstands:Approx.594×399×187mm(23.4×15.7×7.4in.)Mainunitonly,excludingprotrusions:Approx.594×378×106mm(23.4×14.9×4.2in.)

Weight Approximately12kg(26.4lb)

MountingHolePitch VESAstandard100x100mm(3.9x3.9in.)

Interface

Input 3G/HD/SD-SDI 4(1systems)BNC(75Ω)receptacleterminal3G-SDI:SMPTE2048-2/274M/296/372/425-1/428-19/428-9compliantHD-SDI:SMPTE2048-2/274M/292-1/296/428-19/428-9compliantSD-SDI:CompliantwithSMPTE-259M

HDMI 1(1system)typeAterminalContentsprotectionstandard:HDCP2.2

Output 3G/HD-SDI 4(1pass-thrusystems)

Headphone 1stereominijack,Supportedimpedance:32Ωto64Ω

Control USB 1USBAreceptacleterminalUniversalSerialBusSpecificationRevision2.0compliantLS(LowSpeed)/FS(FullSpeed)/HS(HighSpeed)modecompatibleCompliantwithEnhancedHostControllerInterfaceSpecificationforUniversalSerialBusRevision1.0

LAN 1RJ-45terminalCompliantwithIEEE802.310BASE-TX/IEEE802.3u100BASE-TX

67Main specifications/Performance

Dimensions

Main Unit

Panel center

594 (23.4)

100 (3.9)

106 (4.2)

187 (7.4)

493 (19.4)355.4 (14.0)

61 (2.4)

41 (1.6)40 (1.6)

47.5 (1.9)

10 (0.4)

100

(3.9

)

4-M4 Depth: 8 (0.3) (MAX.)

4-M4 Depth: 7 (0.3) (MAX.)

312

(12.

3)37

8 (1

4.9)

399

(15.

7)

230

(9.1

)

374

(14.

7)

144

(5.7

)

160

(6.3

)

21 (0

.8)

5 (0

.2)

15 (0

.6)

15 (0

.6)

567.6 (22.3)

4- 4.5 (0.2)

Unit:mm(inch)

• Front

• Rear

• Side

• Bottom

68 Appendix

AppendixSupported Signal Format

SDI

Formatswith"*"supportaudiosignals.

Transmission method Signal format Color format Color depth Standards

SD-SDIx1 720x576i50.00Hz 4:2:2YCbCr 10-bit SMPTE-259M

HD-SDIx1 1280x720P59.94/60.00Hz* 4:2:2YCbCr 10-bit SMPTE292-1SMPTE2961280x720P50.00Hz*

1280x720P29.97/30.00Hz

1280x720P25.00Hz*

1280x720P23.98/24.00Hz*

1920x1080i59.94/60.00Hz* SMPTE292-1SMPTE274M1920x1080i50.00Hz*

1920x1080P29.97/30.00Hz*

1920x1080PsF29.97/30.00Hz*

1920x1080P25.00Hz*

1920x1080PsF25.00Hz*

1920x1080P23.98/24.00Hz*

1920x1080PsF23.98/24.00Hz*

2048x1080i59.94/60.00Hz

2048x1080i50.00Hz

2048x1080P29.97/30.00Hz SMPTE292-1SMPTE428-9SMPTE428-19SMPTE2048-2

2048x1080PsF29.97/30.00Hz

2048x1080P25.00Hz

2048x1080PsF25.00Hz

2048x1080P23.98/24.00Hz

2048x1080PsF23.98/24.00Hz

3G-SDILevelAx1 1280x720P59.94/60.00Hz* 4:4:4RGB4:4:4YCbCr

10-bit SMPTE425-1SMPTE296

1280x720P50.00Hz* 4:4:4RGB4:4:4YCbCr

10-bit

1280x720P29.97/30.00Hz 4:4:4RGB4:4:4YCbCr

10-bit

1280x720P25.00Hz* 4:4:4RGB4:4:4YCbCr

10-bit

1280x720P23.98/24.00Hz* 4:4:4RGB4:4:4YCbCr

10-bit

1920x1080P59.94/60.00Hz* 4:2:2YCbCr 10-bit SMPTE425-1SMPTE274M

69Appendix


3G-SDILevelAx1 1920x1080i59.94/60.00Hz 4:4:4RGB*4:4:4YCbCr*

12-bit/10-bit SMPTE425-1SMPTE274M

4:2:2YCbCr 12-bit

1920x1080P50.00Hz* 4:2:2YCbCr 10-bit

1920x1080i50.00Hz 4:4:4RGB*4:4:4YCbCr*

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080P29.97/30.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit SMPTE425-1SMPTE274M

4:2:2YCbCr 12-bit

1920x1080PsF29.97/30.00Hz 4:4:4RGB* 10-bit

12-bit

4:4:4YCbCr* 12-bit

4:4:4YCbCr* 10-bit SMPTE425-1SMPTE274M4:2:2YCbCr 12-bit

1920x1080P25.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF25.00Hz 4:4:4RGB* 10-bit

12-bit

4:4:4YCbCr* 12-bit


1920x1080P23.98/24.00Hz 4:4:4RGB*4:4:4YCbCr*

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF23.98/24.00Hz 4:4:4RGB 10-bit

12-bit

4:4:4YCbCr 12-bit

4:4:4YCbCr 10-bit SMPTE425-1SMPTE274M4:2:2YCbCr 12-bit

2048x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1SMPTE428-9SMPTE428-19SMPTE2048-2

2048x1080i59.94/60.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 12-bit

4:2:2YCbCr

2048x1080P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1SMPTE2048-2

70 Appendix


3G-SDILevelAx1 2048x1080i50.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 12-bit

4:2:2YCbCr

2048x1080P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1SMPTE2048-2

2048x1080P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1SMPTE2048-24:2:2YCbCr 12-bit

2048x1080PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit


2048x1080P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit


2048x1080PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit



4:4:4X'Y'Z' 12-bit



4:4:4X'Y'Z' 12-bit


71Appendix


3G-SDILevelBx1 1920x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1SMPTE372SMPTE274M1920x1080i59.94/60.00Hz 4:4:4RGB

4:4:4YCbCr12-bit/10-bit

4:2:2YCbCr* 12-bit

1920x1080P50.00Hz 4:2:2YCbCr 10-bit

1920x1080i50.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr* 12-bit

1920x1080P29.97/30.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF29.97/30.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080P25.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF25.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080P23.98/24.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF23.98/24.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

2048x1080P　59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1SMPTE372SMPTE428-9SMPTE428-19SMPTE2048-2

2048x1080i59.94/60.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z'4:2:2YCbCr

12-bit

2048x1080P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1SMPTE372SMPTE2048-2

2048x1080i50.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z'4:2:2YCbCr

12-bit

72 Appendix


3G-SDILevelBx1 2048x1080P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1SMPTE372SMPTE2048-2

2048x1080P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE372SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1SMPTE372SMPTE2048-2

4:2:2YCbCr 12-bit

2048x1080PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE372SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit


4:2:2YCbCr 12-bit

2048x1080P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE372SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit


4:2:2YCbCr 12-bit

2048x1080PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE372SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit


4:2:2YCbCr 12-bit


4:4:4X'Y'Z' 12-bit


4:2:2YCbCr 12-bit

73Appendix


3G-SDILevelBx1 2048x1080PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE372SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit


4:2:2YCbCr 12-bit

HD-SDIx4 3840x2160i59.94/60.00Hz* 4:2:2YCbCr 10-bit SMPTE292-1SMPTE274M3840x2160i50.00Hz*

3840x2160P29.97/30.00Hz*

3840x2160PsF29.97/30.00Hz*

3840x2160P25.00Hz*

3840x2160PsF25.00Hz*

3840x2160P23.98/24.00Hz*

3840x2160PsF23.98/24.00Hz*

4096x2160i59.94/60.00Hz

4096x2160i50.00Hz

4096x2160P29.97/30.00Hz SMPTE292-1SMPTE428-9SMPTE428-19SMPTE2048-2

4096x2160P29.97/30.00Hz

4096x2160PsF29.97/30.00Hz

4096x2160P25.00Hz

4096x2160PsF25.00Hz

4096x2160P23.98/24.00Hz

4096x2160PsF23.98/24.00Hz

3G-SDILevelAx4 3840x2160P59.94/60.00Hz 4:2:2YCbCr* 10-bit SMPTE425-1SMPTE274M

3840x2160i59.94/60.00Hz 4:4:4RGB*4:4:4YCbCr*

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P50.00Hz 4:2:2YCbCr* 12-bit

3840x2160i50.00Hz 4:4:4RGB*4:4:4YCbCr*

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P29.97/30.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

74 Appendix


3G-SDILevelAx4 3840x2160PsF29.97/30.00Hz 4:4:4RGB* 10-bit SMPTE425-1SMPTE274M

12-bit

4:4:4YCbCr* 12-bit


3840x2160P25.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF25.00Hz 4:4:4RGB* 10-bit

12-bit

4:4:4YCbCr* 12-bit


3840x2160P23.98/24.00Hz 4:4:4RGB*4:4:4YCbCr*

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF23.98/24.00Hz 4:4:4RGB 10-bit

12-bit

4:4:4YCbCr 12-bit

4:4:4YCbCr 10-bit SMPTE425-1SMPTE274M4:2:2YCbCr 12-bit

4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1SMPTE428-9SMPTE428-19SMPTE2048-2

4096x2160i59.94/60.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z'4:2:2YCbCr

12-bit

4096x2160P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1SMPTE2048-2

4096x2160i50.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z'4:2:2YCbCr

12-bit

4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1SMPTE2048-2

75Appendix


3G-SDILevelAx4 4096x2160P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit



4:4:4X'Y'Z' 12-bit


4096x2160P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit


4096x2160PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit



4:4:4X'Y'Z' 12-bit



4:4:4X'Y'Z' 12-bit


3G-SDILevelBx4 3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1SMPTE372SMPTE274M

3840x2160i59.94/60.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr* 12-bit

3840x2160P50.00Hz 4:2:2YCbCr 10-bit

76 Appendix


3G-SDILevelBx4 3840x2160i50.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit SMPTE425-1SMPTE372SMPTE274M4:2:2YCbCr* 12-bit

3840x2160P29.97/30.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF29.97/30.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P25.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF25.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P23.98/24.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF23.98/24.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

4096x2160P　59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1SMPTE372SMPTE428-9SMPTE428-19SMPTE2048-2

4096x2160i59.94/60.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z'4:2:2YCbCr

12-bit

4096x2160P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1SMPTE372SMPTE2048-2

4096x2160i50.00Hz 4:4:4RGB4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z'4:2:2YCbCr

12-bit

4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1SMPTE372SMPTE2048-2

77Appendix


3G-SDILevelBx4 4096x2160P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE372SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit


4:2:2YCbCr 12-bit

4096x2160PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE372SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit


4:2:2YCbCr 12-bit

4096x2160P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE372SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit


4:2:2YCbCr 12-bit

4096x2160PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1SMPTE372SMPTE428-9SMPTE428-19SMPTE2048-2

4:4:4X'Y'Z' 12-bit


4:2:2YCbCr 12-bit


4:4:4X'Y'Z' 12-bit


4:2:2YCbCr 12-bit

4096x2160PsF23.98/24.00Hz 4:4:4YCbCr 12-bit/10-bit SMPTE425-1SMPTE372SMPTE2048-2

4:2:2YCbCr 12-bit

78 Appendix

RAW

Signal format

3840x2160P59.94Hz,50.00Hz,29.97Hz,25.00Hz,24.00Hz,23.98Hz

4096x2160P59.94Hz,50.00Hz,29.97Hz,25.00Hz,24.00Hz,23.98Hz

HDMI

Signal format Color format/Color depth

640x480P59.94/60.00Hz 4:4:4RGB8-bit

800x600P60.00Hz

1024x768P60.00Hz

720x480P59.94/60.00Hz 4:4:4RGB12-bit/10-bit/8-bit4:4:4YCbCr12-bit/10-bit/8-bit4:2:2YCbC12-bit

720x576P50.00Hz

1280x720P59.94/60.00Hz

1280x720P50.00Hz

1920x1080P59.94/60.00Hz

1920x1080i59.94/60.00Hz

1920x1080P50.00Hz

1920x1080i50.00Hz

1920x1080P29.97/30.00Hz

1920x1080P25.00Hz

1920x1080P23.98/24.00Hz

2048x1080P59.94/60.00Hz

2048x1080P50.00Hz

2048x1080P29.97/30.00Hz

2048x1080P25.00Hz

2048x1080P23.98/24.00Hz

3840x2160P59.94/60.00Hz 4:4:4RGB8-bit4:4:4YCbCr8-bit4:2:2YCbC12-bit4:2:0YCbC12-bit/10-bit/8-bit

3840x2160P50.00Hz


3840x2160P25.00Hz

3840x2160P23.98/24.00Hz

4096x2160P59.94/60.00Hz 4:4:4RGB8-bit4:4:4YCbCr8-bit4:2:2YCbC12-bit4:2:0YCbC12-bit/10-bit/8-bit

4096x2160P50.00Hz


4096x2160P25.00Hz

4096x2160P23.98/24.00Hz

79Appendix

Image/Frame Display

SDI

Signal system Display Method

720x576 50.00 i 50.00 P

1280x720 23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

1920x1080 50.00 i 50.00 P

59.94/60.00 i 59.94/60.00 P

23.98/24.00 PsF 47.96/48.00 P*

25.00 PsF 50.00 P*

29.97/30.00 PsF 59.94/60.00 P*

23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

2048x1080 50.00 i 50.00 P

59.94/60.00 i 59.94/60.00 P

23.98/24.00 PsF 47.96/48.00 P*

25.00 PsF 50.00 P*

29.97/30.00 PsF 59.94/60.00 P*

23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

47.95/48.00 P 47.95/48.00 P

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

3840x2160 50.00 i 50.00 P

59.94/60.00 i 59.94/60.00 P

23.98/24.00 PsF 47.96/48.00 P*

25.00 PsF 50.00 P*

29.97/30.00 PsF 59.94/60.00 P*

23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

80 Appendix


4096x2160 50.00 i 50.00 P

59.94/60.00 i 59.94/60.00 P

23.98/24.00 PsF 47.96/48.00 P*

25.00 PsF 50.00 P*

29.97/30.00 PsF 59.94/60.00 P*

23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

47.95/48.00 P 47.95/48.00 P

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

*:Displayingsameframe

81Appendix

HDMI


640x480 59.94/60.00 P 59.94/60.00 P

800x600 60.00 P 60.00 P

720x480P 59.94/60.00 P 59.94/60.00 P

720x576 50.00 P 50.00 P

1024x768 60.00 P 60.00 P

1280x720 59.94/60.00 P 59.94/60.00 P

1280x720 50.00 P 50.00 P

1920x1080 59.94/60.00 P 59.94/60.00 P

1920x1080 59.94/60.00 i 59.94/60.00 P

1920x1080 50.00 P 50.00 P

1920x1080 50.00 i 50.00 P

1920x1080 59.94/60.00 i 59.94/60.00 P

1920x1080 29.97/30.00 P 59.94/60.00 P*

1920x1080 25.00 P 50.00 P*

1920x1080 23.98/24.00 P 47.96/48.00 P*

2048x1080 59.94/60.00 P 59.94/60.00 P

2048x1080 50.00 P 50.00 P

2048x1080 29.97/30.00 P 59.94/60.00 P*

2048x1080 25.00 P 50.00 P*

2048x1080 23.98/24.00 P 47.96/48.00 P*

3840x2160 59.94/60.00 P 59.94/60.00 P

3840x2160 50.00 P 50.00 P

3840x2160 29.97/30.00 P 59.94/60.00 P*

3840x2160 25.00 P 50.00 P*

3840x2160 23.98/24.00 P 47.96/48.00 P*

4096x2160 59.94/60.00 P 59.94/60.00 P

4096x2160 50.00 P 50.00 P

4096x2160 29.97/30.00 P 59.94/60.00 P*

4096x2160 25.00 P 50.00 P*

4096x2160 23.98/24.00 P 47.96/48.00 P*

*:Displayingsameframe

82 Appendix

Input Signals and Adjustable/Setting Item

Thefollowingitemshavelimitationsdependingontheinputsignals.

Setting item

Input signal

3G/HD/SD-SDI 3G-SDI RAW HDMI

YCbCr/RGB/XYZ RGB

Adjustment 2020ConstantLuminance *1

ChannelSettings SelectInputSignal *2 *3

Format *4 *5 *6

DisplaySettings Zoom *7

PsF —

FilmCadence *8

FunctionSettings TimeCode *9

ScreenCapture *10

CameraLink *11 *12

-:Settingisdisabled.*1 :SD-SDIisfixedto"Non-constantLuminance".*2 :Cannotbesetto"DualInput".*3 :Fixedto"Automatic".*4 :SD-SDIisfixedto"4:2:2YCbCr10-bit".*5 :Fixedto"Automatic".*6 :Only"Automatic"or"4:4:4XYZ10/12-bit"canbeselected.*7 :Only"Center"or"Off"canbeselected.*8 :Canbesetonlywhen"I/PConversion"issetto"ImagePriority".*9 :CanbedisplayedonlyonCanoncamerasthatsupportHDMItimecodeoutput.*10 :CannotbeexecutedwhenverifiedbyHDCP.*11 :Canbesetonlywhen"CanonLog"issetfor"PictureMode".*12 :Canbesetonlyfor"Fan".

83Error Messages

Error Messages

Message Description and Action

Calibration Failedtoinitializetheexternalsensor. SeeCA-310andCA-210instructionmanual.

Calibrationerror. • Checktheinstallationandconnectionoftheexternalsensorandretry( 22).

• PerformmatrixcalibrationofCA-310andCA-210( 22).

Calibrationiscompleted.(Brightnesssettingislowerthantargetbrightness.)

Setthe"Luminance"incalibrationagain( 40).

Failedtodetecttheexternalsensor.Pleasechecktheconnectionwiththesensor.

CorrectlyconnecttheexternalsensortotheUSBportofthismainunit.

Network Communicationerror. IPaddressmaybeinconflictortheremaybeanetworkcommunicationerror.Checkthenetworkenvironment.

InvalidIPAddress. EnterthecorrectIPaddress.

InvalidSubnetMask. Enterthecorrectsubnetmask.

Varioussettings,CDLexport

TheUSBmemoryisfull. UseanotherUSBmemoryordeletethecontentofthememory.

Failedtowritefile. TheUSBmemorymaybedefectiveorprotected.ChecktheUSBmemory.

LUT,Varioussettings,CDLimport

(LUTImport)"LUTType"isdifferent.(CDLImport)"FileType"isdifferent.

Selectthecorrectfileformat.

Failedtoreadfile. TheUSBmemorymaybedefectiveorprotected.ChecktheUSBmemory.

Failedtoimport. Thereisanerrorinthefiletobeimported.Checkthefile.

Noimportfile. ChecktoseeifthefilehasbeenimportedtotheUSBmemory.

ScreenCapture

Failedtocapture. TheUSBmemorymaybedefectiveorprotected.ChecktheUSBmemory.

InvalidSignal. Ascreendisplayingnovideoisbeingcapturedforexamplethereisnosignaloranunsupportedsignalisbeinginput.Checkthesignal,inputitagain,andcaptureit.

Copyprotectedsignal. ThesignalyoutriedtocapturemaybeprotectedbyHDCP2.2whichisacopypreventionstandardforHDMI.Inthiscase,thesignalcannotbecaptured.ChecktheHDMIsignal.

Failedtoplaybackfile. TheUSBmemorymaybedefectiveorprotected.ChecktheUSBmemory.

84 Error Messages

Message Description and Action

Hardwareerror Backlighterror. Disconnectthepowercord,reconnectit,andthenturnonthepower.Ifthemessagepersists,contactCanonCustomerCenter.

Fanerror.

Panelerror.

I/Ferror.

Systemerror.

Invalidoperationduetohightemperature. Thetemperatureinsidethemainunitishigh.Turnoffthepowerandwaituntilthefanstops.

Inputsignal NoSignal Displayedwhenthereisnovideosignalinput.

Unsupported Unsupportedvideosignalisinput.Checkthesupportedsignalformat( 68).

"InputConfiguration"isdifferentfromPayload. Checkthe"InputConfiguration"( 43)and"SignalInformation"( 65)settings.Resetanyincorrect"InputConfiguration"settings.

Operation Invalidoperation. Operationisdisabled.Checkthesettingitems.

"ProtectSettings"ison. TousetheOSDmenu,movetheselectionframeto"ProtectSettings"andpressthejogdialforapproximately3seconds.

"CDLBypass"ison. When"CDLBypass"isturned"On",youcannotadjust"Power","Saturation","Offset",or"Slope".

InvalidPassword. Enterthecorrectpassword.

USBmemory USBmemoryisnotconnected. CorrectlyconnecttheUSBmemorytotheUSBportofthismainunit.

UnsupportedUSBmemory. ChecktheUSBmemoryformatandmakesureitisnotprotected.

DCpowersupply LowVoltage. IndicatesthattheinputvoltageoftheDCpowersupplyhasbecomebelowapprox.22.5V.CheckthevoltageoftheDCpowersupply.

LowVoltage,Turnoffpower. IndicatesthattheinputvoltageoftheDCpowersupplyhasbecomebelowapprox.21.0Vandthepowerwillbeturnedoff.Connecta23.5VorhigherDCpowersupplyandpressthe buttontoturnonthepower.

InvalidVoltage,Turnoffpower. IndicatesthattheinputvoltageoftheDCpowersupplyhasreachedapprox.35.8Vorhigher.ChecktheinputvoltageoftheDCpowersupply.

85Troubleshooting

Troubleshooting

Symptom Cause and Action

Powerdoesnotturnon.(Powerindicatordoesnotturnon.)

• Pressthe button.

• CheckthattheACpowersupplyorDCpowercordisconnectedcorrectly.

• Brightnessofthepowerindicatormaybeturnedoff.Turnitonandcheckoncemore.

9

17

62

Thescreenisdark. Whenthepowerindicatordoesnotturnon:• Pressthe button.

• CheckthattheACpowersupplyorDCpowercordisconnectedcorrectly.

9

17

Whenthepowerindicatorislitorange:• Pressthe button.

9

Whenthepowerindicatorisflashingorange:• Flashingonceevery3seconds: ContactCanonCustomerCenter.

• Flashingtwiceevery3seconds: -Turnonthepowerwiththe button.-Thetemperatureofthedisplayrises(orfalls)dependonoperationenvironment.Checktheenvironmentalconditions( 66)anddonotuseindirectsunlight.-Ifthepowerstilldoesnotturnon,contactCanonCustomerCenter.

9

66

ThepowersuddenlygoesoffwhenaDCpowersupplyisused.

• SomeDCpowersupplyunitsturnoffthevoltagewhenathresholdvalueisreached.Inthiscase,themessageindicatinglowvoltageisnotdisplayed.ConnectachargedDCpowersupplyorACpowersupply.

—

Theimagedoesnotdisplay. • Seteachitemin"ChannelSettings"accordingtoinputsignal. 43

Thereisablankareawhensetto4KInput.

• Theremaybenoinputsignal.Lookatthedisplayareaiconintheinterfaceareaandcheckthattheinputareaandsignalcablesareproperlyconnected.

• Signalswithdifferentresolutionorfrequencymaybeinputfromeachterminal.Checkthesignal.

15

65

Screenistoobright/dark. • Adjustthe"Contrast"ontheOSDmenu.

• ThereisalimitontheservicelifeofLCDbacklight.Ifthescreenbecomesdarkorstartsflickering,contactCanonCustomerCenter.

34

Burn-inimageappears. • ThisisacharacteristicoftheLCDpanelandyoushouldavoiddisplayingstationaryimageforalongtime.

—

Thereisanunlitorred,blue,green,orwhitedotonscreen.

• LCDdisplayismadeofveryhighprecisiontechnology.Ithaseffectivepixelsof99.99%ormore,buttheremaybeblackdotsorred,blue,orgreendotsthatmaybealwayson.Thisisnotafailure.

—

ThereisaninterferencepatternortracethatremainswhentheLCDpanelispressed.

• Thesymptommayberesolvedbydisplayingawhiteorblackimageontheentirescreen. —

86 Troubleshooting

Symptom Cause and Action

OSDmenucannotbeused. • Checkthat"ProtectSettings"isnotset. 63

"AspectMarker","SafetyZoneMarker"or"AreaMarker"doesnotappear.

• Achannelwithnosignal,unsupportedsignal,orwith"InputConfiguration"notsetmaybeselected.Checkthesignal.

65

Thefanstartstorotateevenwhen"Fan"under "CameraLink" is set to "On"or"FanStop"issetto"On".

• Thefanstaysoffforapprox.1minutewhenanACpowersupplyisused.Tokeepthefanoffforalongerperiod,useaDCpowersupply.

• When"Fan"under"CameraLink"issetto"On",thedowntimemaynotmatchthecamera.

59

63

The fandoesnotstopevenwhen"Fan"under "CameraLink" is set to "On"or"FanStop"issetto"On".

• Thefandoesnotstopiftheinternaltemperatureofthevideodisplayishigh.Configuresettingsaftertheinternaltemperaturehaslowered.

• Thefanmaynotstopinsomeconditions,forexamplewhenusedatahightemperature.Usethevideodisplayattheoperatingtemperature( 66)orlower.

59

63

You forgot the password for "ProtectSettings".

• Pressthejogdialandthe buttonwhilethevideodisplayisinstandby.Theconfigurationwillberesettothestatewherenopasswordisset.

9

Thevideodisplaydoesnotstartupinthecondition that thepowerwas turnedofflasttime.

• Checkthe"PoweronSetting"ontheOSDmenu.Set"Lastmemory"tostartupthevideodisplayintheconditionthatthepoweristurnedofflasttime.

64

87Software Used in This Product

Software Used in This ProductSoftwareinstalledwiththisproductincludessoftwaremodulesfromCanonorthirdparties.

Software Developed by Canon and Free Software

SoftwaredevelopedorcreatedbyCanonandaccompanyingdocumentisprotectedbycopyrightlaw,termsofaninternationalconventionandanyothergoverninglaws.Thisproductusessoftwaremodulesundercopyrightbythirdpartiesanddistributedasfreesoftware.SomeofthesesoftwaremodulesaresubjecttotheGNUGeneralPublicLicensev2(GPL),GNULesserGeneralPublicLicensev2.1(LGPL)oranyotherlicense.

Acquiring Source Code for Free Software

Somefreesoftwarerequirestheacquirementofthesourcecodeofmodulesinordertodistributetheexecutableformofthosesoftwaremodules.ForinformationonhowtoacquirethesourcecodeforfreesoftwaresuchastheseandconfirmingtermsoftheGPL,LGPLandotherlicenseagreements,pleasecheckwiththedistributorfromwhomtheproductwaspurchased.

Thefollowingfreesoftwaremodulesareinstalledtothisproduct:•linuxkernel •busybox •glibc •JFFS2•SquashFS •FUSE •libfuse •libupnp•avahi-autoipd •libxml •zlib •libpng

License Agreement for this Product

Obligation to Present License Agreement

Thecopyrightholdersofsoftwaremodulesinstalledwiththisproductrequireitslicenseagreementtobedisplayed.Thislicenseagreementisasfollows:

libupnp License

Copyright(c)2000-2003IntelCorporationAllrightsreserved.

Redistributionanduseinsourceandbinaryforms,withorwithoutmodification,arepermittedprovidedthatthefollowingconditionsaremet:

* Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowingdisclaimer.

* Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowingdisclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.

* NeithernameofIntelCorporationnorthenamesofitscontributorsmaybeusedtoendorseorpromoteproductsderivedfromthissoftwarewithoutspecificpriorwrittenpermission.

THISSOFTWAREISPROVIDEDBYTHECOPYRIGHTHOLDERSANDCONTRIBUTORS"ASIS"ANDANYEXPRESSORIMPLIEDWARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITYANDFITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLINTELORCONTRIBUTORSBELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,ORCONSEQUENTIALDAMAGES(INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOFSUBSTITUTEGOODSORSERVICES;LOSSOFUSE,DATA,ORPROFITS;ORBUSINESSINTERRUPTION)HOWEVERCAUSEDANDONANYTHEORYOFLIABILITY,WHETHERINCONTRACT,STRICTLIABILITY,ORTORT(INCLUDINGNEGLIGENCEOROTHERWISE)ARISINGINANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVENIFADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGE.

88 Software Used in This Product

libxml License

Copyright(C)1998-2003DanielVeillard.AllRightsReserved.

Permissionisherebygranted,freeofcharge,toanypersonobtainingacopyofthissoftwareandassociateddocumentationfiles(the"Software"),todealintheSoftwarewithoutrestriction,includingwithoutlimitationtherightstouse,copy,modify,merge,publish,distribute,sublicense,and/orsellcopiesoftheSoftware,andtopermitpersonstowhomtheSoftwareisfurnishedtodoso,subjecttothefollowingconditions:

TheabovecopyrightnoticeandthispermissionnoticeshallbeincludedinallcopiesorsubstantialportionsoftheSoftware.

THESOFTWAREISPROVIDED"ASIS",WITHOUTWARRANTYOFANYKIND,EXPRESSORIMPLIED,INCLUDINGBUTNOTLIMITEDTOTHEWARRANTIESOFMERCHANTABILITY,FITNESSFORAPARTICULARPURPOSEANDNONINFRINGEMENT.INNOEVENTSHALLTHEDANIELVEILLARDBELIABLEFORANYCLAIM,DAMAGESOROTHERLIABILITY,WHETHERINANACTIONOFCONTRACT,TORTOROTHERWISE,ARISINGFROM,OUTOFORINCONNECTIONWITHTHESOFTWAREORTHEUSEOROTHERDEALINGSINTHESOFTWARE.

Exceptascontainedinthisnotice,thenameofDanielVeillardshallnotbeusedinadvertisingorotherwisetopromotethesale,useorotherdealingsinthisSoftwarewithoutpriorwrittenauthorizationfromhim.

89Index

IndexNumber

3G/HD/SD-SDI.................................................... 10,15

3GSDIRAW....................................................... 10,15

4KInput.................................................................... 43

5Step(TestPattern).................................................. 57

200%(ScreenScaling).............................................. 45

2020ConstantLuminance........................................ 40

2020GamutMapping............................................... 40

A

ACESproxy................................................................ 34

Adjustment................................................................ 34

AdobeRGB............................................................... 34

AnchorAdjustment.............................................. 21,40

AreaMarker............................................................... 52

AspectMarker........................................................... 49

AudioLevelMeter...................................................... 57

AudioSettings........................................................... 48

Automatic(ScreenScaling)........................................ 45

B

BackgroundColor..................................................... 46

BacklightControl....................................................... 34

BacklightScan.......................................................... 58

Banner...................................................................... 58

BiasR/G/B................................................................ 35

Bicubic...................................................................... 46

Black(TestPattern).................................................... 57

BlueOff..................................................................... 58

BlueOnly................................................................... 58

Blue(TestPattern)..................................................... 57

BoostContrast.......................................................... 39

Brightness................................................................. 34

C

Calibration........................................................... 22,40

CameraInformation................................................... 59

CameraLink.............................................................. 58

CanonLog,CanonLog2..................................... 34,36

CDLBypass.............................................................. 39

CDLExport/CDLImport...................................... 24,39

CenterMarker........................................................... 53

ChannelName..................................................... 25,44

ChannelSettings....................................................... 43

ChannelUP/ChannelDOWN..................................... 61

Chroma..................................................................... 34

CinemaGamutto709............................................... 35

CinemaGamutto2020............................................. 35

CinemaGamuttoDCI............................................... 35

ColorBars(TestPattern)............................................ 57

ColorGamut.............................................................. 35

ColorRange........................................................ 38,44

ColorTemperature..................................................... 35

CompatibleSettings.................................................. 62

ConfigureanIPAddress............................................ 60

Contrast.................................................................... 34

Custom(xy)(ColorTemperature)................................ 35

D

Date/Time........................................................... 25,62

DCI-P3...................................................................... 34

DCI-P3+to709......................................................... 35

DCI-P3+toDCI......................................................... 35

DetailSettings

Adjustment............................................................ 39

CDL....................................................................... 39

DisplayButtonLED................................................... 62

DisplayChannel......................................................... 62

DisplayFunction/DisplayFunction(CDL).................... 60

DisplayName...................................................... 25,62

DisplaySettings......................................................... 45

DualInput............................................................ 15,43

E

EBU........................................................................... 34

Export/Import...................................................... 24,64

F

FalseColor................................................................ 54

FanControl................................................................ 63

FilmCadence............................................................ 47

FirmwareVer.............................................................. 65

Format....................................................................... 43

FrameHold............................................................... 46

Function/ChannelButton........................................... 60

FunctionGuide.......................................................... 58

FunctionSettings....................................................... 54

G

GainR/G/B................................................................ 35

Gamma..................................................................... 36

GlobalDimming......................................................... 34

90 Index

Gray(20%)(TestPattern)........................................... 57

GreenOff................................................................... 58

Green(TestPattern)................................................... 57

GridMarker............................................................... 53

H

HDMI................................................................... 10,16

HDRRange............................................................... 37

HD-SDI................................................................ 10,15

HideOSD.................................................................. 60

I

IDT............................................................................ 37

ImagePriority............................................................ 46

InputConfiguration.................................................... 43

InternalSync............................................................. 44

I/PConversion........................................................... 46

I/PsF.......................................................................... 46

ITU-RBT.709............................................................. 34

ITU-RBT.1886........................................................... 36

ITU-RBT.2020........................................................... 34

L

LAN........................................................................... 10

Language.................................................................. 60

LocalDimming.......................................................... 34

LTC........................................................................... 55

Luminance................................................................. 40

LUTImport.......................................................... 23,39

M

MACAddress............................................................ 65

MarkerPreset............................................................ 49

MarkerSettings......................................................... 49

Monochrome............................................................. 58

N

NativeInputResolution(ScreenScaling).................... 45

NearestNeighbor...................................................... 46

Network.................................................................... 60

O

ODT.......................................................................... 37

ODTSurround........................................................... 38

Offset........................................................................ 39

OSDMenu.......................................................... 18,28

OSDPosition............................................................. 58

OSDSize................................................................... 58

P

Password.................................................................. 63

Peaking..................................................................... 54

PictureMode............................................................. 34

PLUGE(TestPattern)................................................. 57

Power........................................................................ 39

PowerIndicatorBrightness........................................ 62

PoweronSetting....................................................... 64

ProtectSettings......................................................... 63

PsF............................................................................ 46

R

Ramp(TestPattern)................................................... 57

RedOff...................................................................... 58

Red(TestPattern)...................................................... 57

Reset......................................................................... 40

ResetAllSettings...................................................... 64

S

SafetyZoneMarker1,2............................................ 50

Saturation.................................................................. 39

ScalingMethod......................................................... 46

Bicubic.................................................................. 46

NearestNeighbor................................................... 46

ShapeTrace........................................................... 46

ScreenCapture......................................................... 54

ScreenScaling.......................................................... 45

200%..................................................................... 45

Automatic.............................................................. 45

NativeInputResolution.......................................... 45

SelectChannel.......................................................... 43

SelectInputSignal..................................................... 43

4KInput................................................................. 43

SingleInput/DualInput........................................... 43

SerialNo................................................................... 65

Settings............................................................... 24,64

ShapeTrace.............................................................. 46

Sharpness................................................................. 34

SignalInformation...................................................... 65

SingleInput............................................................... 43

Slope......................................................................... 39

SMPTE-C.................................................................. 34

SpeedPriority............................................................ 46

SubnetMask............................................................. 60

SystemInformation.................................................... 65

SystemSettings........................................................ 60

91Index

T

TestPattern............................................................... 57

TimeCode................................................................ 55

U

UsageTime............................................................... 65

USB................................................................ 9,22,23

User1-7.................................................................... 34

UserLUT............................................................. 35,36

V

VariousFunction(FunctionSettings).......................... 58

VectorScope............................................................. 56

VITC.......................................................................... 55

W

WaveFormMonitor................................................... 55

White(TestPattern)................................................... 57

Z

Zoom........................................................................ 45

92

USA

CANON PROFESSIONAL DISPLAY LIMITED WARRANTY FOR PRODUCTS PURCHASED IN THE UNITED STATES

ThelimitedwarrantysetforthbelowisgivenbyCanonU.S.A.,Inc.('CanonUSA')withrespecttoCanonProfessionalDisplayEquipment(the'Equipment')accompanyingthislimitedwarrantyintheEquipment’soriginalcontainer,whenpurchasedintheUnitedStates.ThislimitedwarrantyisonlyeffectiveuponpresentationofyourBillofSaleorotherproofofpurchase.CanonUSAwarrantstotheoriginalend-userpurchaser,whendeliveredinnewconditioninitsoriginalcontainer,thattheEquipmentwillbefreefromdefectsinmaterialsandworkmanshipundernormaluseandserviceforaperiodofONE-YEARfromthedateoforiginalpurchase.WhenreturningEquipmentunderthiswarranty,youmustpre-paytheshippingcharges,andyoumustencloseacopyoftheBillofSaleorotherproofofpurchasewithacompleteexplanationoftheproblem.EquipmentreturnedtoaCanonUSAfactoryservicefacility,andproventobedefectiveuponinspection,willbe,withoutcharge,:(a)repairedutilizingneworcomparablerefurbishedparts,or(b)exchangedforrefurbishedornewEquipmentasdeterminedintheCanonUSA’srepairfacility’ssolediscretion.TherepairedorexchangedEquipmentwillbeshippedbackfreeofcharge.WarrantyexchangeorreplacementdoesnotextendtheoriginalwarrantyperiodoftheEquipment.Forrepairsafterthewarrantyperiodhasexpired,anestimateofthecostofrepairandanopportunitytoapproveorrejecttherepairexpensebeforeitisincurredwillbeprovided.Ifyouapprove,repairswillbemadeandtheEquipmentwillbereturnedatyourriskandexpense.Ifyoureject,theEquipmentwillbereturnedtoyouatnochargetoyoutoanaddresswithintheUnitedStates.

This limited warranty only applies if the Equipment is used in conjunction with compatible computer equipment, compatible peripheral equipment and compatible software, as to which items Canon USA will have no responsibility. Canon USA shall have no responsibility under this limited warranty for use of the Equipment in conjunction with incompatible peripheral equipment and/or incompatible software. Non-Canon brand peripheral equipment and software which may be distributed with, or be factory loaded on, the Equipment, are sold 'AS IS' without warranty of any kind by Canon USA, including any implied warranty regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such non-Canon brand items is given by the manufacturer or producer thereof. If the Equipment contains a hard disk drive, Canon USA recommends that data stored on that drive be duplicated or backed up to prevent its loss in the event of failure or other malfunction of such drive.

Inordertoobtainwarrantyservice,pleasecontacttheauthorizedCanonretaildealerfromwhomyoupurchasedtheEquipmentorcontacttheCANONINFORMATIONCENTERAT855-4K-CANON(855-452-2666)orontheinternetatpro.usa.canon.com/support.YouwillbedirectedtothenearestservicefacilityforyourEquipment.

Technicalsupportprogramspecificssubjecttochangewithoutnotice.

ThisLimitedWarrantycoversalldefectsencounteredinnormaluseoftheEquipmentanddoesnotapplyinthefollowingcases:

A. LossordamagetotheEquipmentduetoabuse,neglect,mishandling,electriccurrentfluctuation,accident, impropermaintenance,useofnon-Canonaccessoriesorfailuretofollowoperating,maintenanceor environmentalinstructionsprescribedinCanonUSA’suser’smanual;B. IftheEquipmentisdefectiveasaresultofsand,dirtorwaterdamage;C. Ifdefectsordamagesarecausedbytheuseofpartsorsupplies(otherthanthosesoldbyCanonUSA)that causedamagetotheEquipmentorthatcauseabnormallyfrequentservicecallsorserviceproblems;D. IfdefectsordamagesarecausedbyserviceotherthanCanonUSA'sfactoryservicecentersorauthorized servicefacilities;E. Anyinternalmodificationtoproducthardwareorfirmware;F. AnymaintenanceoftheEquipment,includinganyfeesforsuchMaintenance;G. IftheEquipmenthashaditsserialnumberordatingalteredorremoved.

93

ThisLimitedWarrantydoesnotapplytoEquipmentpurchasedoutsidetheUnitedStates.ThisLimitedWarrantydoesnotapplytoaccessoriesorconsumablesfortheEquipment,whicharesold“ASIS”,withoutwarrantyofanykindbyCanonUSA.PleaseretainthiswarrantycardandyourBillofSaleasapermanentrecordofyourpurchase.Thiscardensuresthatyouarecontactedpromptlyshouldtherebeasafetyinspection,modificationorproductrecallunderapplicablelawsorregulations.Thiscardensuresthatyouarecontactedpromptlyshouldtherebeasafetyinspection,modificationorproductrecallunderapplicablelawsorregulations.

NO IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLIES TO THIS EQUIPMENT AFTER THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR GUARANTY UNDER THIS WARRANTY (EXCEPT AS MENTIONED ABOVE). (SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU). CANON USA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED ON THE EQUIPMENT’S HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA BE GREATER THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON USA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE EQUIPMENT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON USA (SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU).THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.

Thiswarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightswhichvaryfromstatetostate.

CANON U.S.A., INC

94

CANADA

CANON PROFESSIONAL DISPLAY LIMITED WARRANTY FOR PRODUCTS PURCHASED IN CANADA

ThelimitedwarrantysetforthbelowisgivenbyCanonCanadaInc.('CanonCanada')withrespecttoCanonProfessionalDisplayEquipment(the'Equipment')accompanyingthislimitedwarrantyintheEquipment’soriginalcontainer,whenpurchasedinCanada.Thislimitedwarrantyisonlyeffectiveuponpresentationofyourbillofsaleorotherproofofpurchase.CanonCanadawarrantstotheoriginalend-userpurchaser,whendeliveredinnewconditioninitsoriginalcontainer,thattheEquipmentwillbefreefromdefectsinmaterialsandworkmanshipundernormaluseandserviceforaperiodofONEYEARfromthedateoforiginalpurchase.WhenreturningEquipmentunderthislimitedwarranty,youmustpre-paytheshippingcharges,andyoumustencloseacopyofthebillofsaleorotherproofofpurchasewithacompleteexplanationoftheproblem.EquipmentreturnedtoaCanonCanadafactoryservicefacilityandproventobedefectiveuponinspectionwillbe,withoutcharge:(a)repairedutilizingneworcomparablerefurbishedparts,or(b)exchangedforrefurbishedornewEquipment,asdeterminedbytheCanonCanadafactoryservicecenter,initssolediscretion.TherepairedorexchangedEquipmentwillbeshippedbackfreeofcharge.WarrantyexchangeorreplacementdoesnotextendtheoriginalwarrantyperiodoftheEquipment.Forrepairsafterthewarrantyperiodhasexpired,anestimateofthecostofrepairandanopportunitytoapproveorrejecttherepairexpensebeforeitisincurredwillbeprovided.Ifyouapprovetheproposedrepairs,repairswillbemadeandtheEquipmentwillbereturnedatyourriskandexpense.Ifyourejecttheproposedrepairs,theEquipmentwillbereturnedtoyouatnochargetoyoutoanaddresswithinCanada.

This limited warranty only applies if the Equipment is used in conjunction with compatible computer equipment, compatible peripheral equipment and compatible software, as to which items Canon Canada will have no responsibility. Canon Canada shall have no responsibility under this limited warranty for use of the Equipment in conjunction with incompatible computer equipment, peripheral equipment and/or incompatible software. Non-Canon brand peripheral equipment and software which may be distributed with, or be factory loaded on, the Equipment, are sold 'AS IS' without warranty or condition of any kind by Canon Canada, including any implied warranty or condition regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such non-Canon brand items is given by the manufacturer or producer thereof. If the Equipment contains a hard disk drive, Canon Canada recommends that data stored on that drive be duplicated or backed up to prevent its loss in the event of failure or other malfunction of such drive.

Inordertoobtainwarrantyservice,pleasecontacttheauthorizedCanonretaildealerfromwhomyoupurchasedtheEquipmentorcontacttheCANONINFORMATIONCENTERat800-667-2666orontheinternetatwww.canon.ca/pro.

Technicalsupportprogramspecificsaresubjecttochangewithoutnotice.

ThislimitedwarrantycoversalldefectsencounteredinnormaluseoftheEquipmentanddoesnotapplyinthefollowingcases:A. LossordamagetotheEquipmentduetoabuse,neglect,mishandling,electriccurrentfluctuation,accident, impropermaintenance,useofnon-Canonaccessoriesorfailuretofollowoperating,maintenanceor environmentalinstructionsprescribedinCanonCanada’susersmanual;B. IftheEquipmentisdefectiveasaresultofsand,dirtorwaterdamage;C. Ifdefectsordamagesarecausedbytheuseofpartsorsupplies(otherthanthosesoldbyCanonCanada)that causedamagetotheEquipmentorthatcauseabnormallyfrequentservicecallsorserviceproblemsD. IfdefectsordamagesarecausedbyserviceotherthanCanonCanada'sfactoryservicecentersorauthorized servicefacilities;E. Anyinternalmodificationtoproducthardwareorfirmware;F. AnymaintenanceoftheEquipment,includinganyfeesforsuchmaintenance;orG. IftheEquipmenthashaditsserialnumberordatingalteredorremoved.

95

ThislimitedwarrantydoesnotapplytoEquipmentpurchasedoutsideCanada.ThislimitedwarrantydoesnotapplytoaccessoriesorconsumablesfortheEquipment,whicharesold“ASIS”,withoutwarrantyorconditionofanykindbyCanonCanada.Pleaseretainthiswarrantycardandyourbillofsaleorotherproofofpurchaseasapermanentrecordofyourpurchase.Thiscardensuresthatyouarecontactedpromptlyshouldtherebeasafetyinspection,modificationorproductrecallunderapplicablelawsorregulations.

NO IMPLIED WARRANTY OR CONDITION, INCLUDING IN RESPECT OF THE MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THIS EQUIPMENT AFTER THE EXPIRATION OF THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR GUARANTEE UNDER THIS LIMITED WARRANTY (EXCEPT AS MENTIONED ABOVE). (SOME PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU). CANON CANADA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED ON THE EQUIPMENT’S HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON CANADA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON CANADA BE GREATER THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON CANADA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE EQUIPMENT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON CANADA (SOME PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU).THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.

Thislimitedwarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightswhichvaryfromprovincetoprovince.

CANON CANADA INC.

Visit your local Canon Web site to download the latest version of this instruction manual.

Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

AUSTRALIA www.canon.com.auCanon Australia Pty Ltd

13-13-83 (within Australia only) (61) 02-9805-2000

CANADA CANON CANADA INC.http://www.canon.ca/pro Professional Product Support / Soutien des

produits professionnels (800) 667-2666

CENTRO Y SURAMÉRICA CANON LATIN AMERICA, INC.

http://www.cla.canon.com

EUROPE www.canon-europa.com Canon Europa N.V.Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands

MÉXICO CANON MEXICANA, S DE RL DE CVhttp://www.canon.com.mx 52 (55) 5249-4900

NEW ZEALAND www.canon.co.nzCanon New Zealand Ltd

0800-222-666 (within New Zealand only)(64) 09-489-0300

UNITED KINGDOM www.canon.co.ukCanon UK LtdCCI Service Centre, Unit 130, Centennial Park, Borehamwood, Hertfordshire, WD6 3SE

0844-369-0100

USA CANON U.S.A., INC.http://pro.usa.canon.comhttp://pro.usa.canon.com/support

(855) 4K-CANON (855-452-2666) (USA only)

캐논코리아컨슈머이미징 http://www.canon-ci.co.kr서울특별시 강남구 테해란로607, 캐논빌딩 5층 대표전화+82(0)2-1588-8133

Canon Korea Consumer Imaging Inc. http://www.canon-ci.co.kr5F, Canon Bldg, 607, Teheran-ro, Gangnam-gu, Seoul, Korea

+82(0)2-1588-8133

MIE-0010-000 ©CANONINC.2015

Instruction Manualgdlp01.c-wss.com/gds/1/0300021231/01/dpv2410-im1-en.pdf · 2015-10-27 ·...

Documents

Transcript of Instruction Manualgdlp01.c-wss.com/gds/1/0300021231/01/dpv2410-im1-en.pdf · 2015-10-27 ·...