1

Read carefully the user’s manual before use.

In the event of malfunction or damage due to a violation of the instructions specified in the user's manual, repairs may be charged within the warranty period.Some of the contents may change without notice for the improvement of product quality.Disassembly and modification of this product are strictly prohibited.

Instant Food Cooker

(LAZO-2000IH) MANUAL

2

Contents

Name and components of each division

Precautions for safe use

How to install

How to use

How to change your settings

Notes on use

Error code guide

Certification

Warranty

03

04

05

06

07

08

09

10

11

3

Name and components of each division

> This appliance uses hot water and heat to cook instant food.

1. Range of cooker usage

2. Device and functions built into cooker

※ Parts and usage of this cooker is subject to change without notice due to quality improvement or specification change of the parts manufacturing company.

3. Device and parts

Please ensure to use this cooker only for food cooked with water.- Putting on food not containing water can lead to a risk of fire or breakdown.

This cooker should be used only for exclusively disposable containers.- Using regular containers other than disposable containers may cause lead to fire or breakdown due to cooker overheating.

This cooker is designed to operate for about 4 minutes at a time.

Cooker composition

Front Side Back

Power switch

Drain holeTop plate glassTuyere Inlet

Outlet

Control Board

Power cord

① Electric water heater : It stores and supplies water of about 85°C.- Water is filled and heated in the electric water heater automatically.

② Induction range: Continuously heats up the water supplied to the container.

③ PCBA : Controls electric water heater and induction range to operate smoothly.

4

Standard

Precautions for safe use

Cooker size Front side 23cm x Side 42cm x Height 34.5cm

Exterior materialHeat-resistant plastic

Cooking table top plate: heat-resistant tempered glass

Weight 4.8kg

Main parts

Electric water heater, 1 liter

Induction range

PCBA

Control Pannel

Solenoid valve

Motor(Option)

Safety device

Overheating prevention sensor

Overheating prevention temperature fuse

Overheating prevention bimetal

Working voltage 220V 60Hz

Power consumption 1700W

Additional accessories

Tubing line(Hose 2m, T-Valve, Ball-valve) *For motor type, only hose is provided.

Installation is prohibited in the following places.

Location where there is a risk of fire or electric leakage.

Location where a risk of fire or electric leakage exists.

Location where water can flow into the cooker.

Extremely humid area.

Location where dust or foreign substance can enter into the cooker.

Location where highly volatile or explosive chemical exists.

Location where about 10cm distance is not secured on left, right and back side of the cooker.

Location where the cooker is not fixed and can be shaken.

Location exposed to rain, snow, wind, and lightning.

Location exposed to direct sunlight.

Location where ambient temperature drops below 0°C, or the place maintinaing above 30°C.

5

How to install

1. Water supply connection

By connecting the water supply unit

For the spot where water purifier or electric water heater is used

① Cut off the middle of the water supply hose that connects faucet and water purifier.

② Connect each of them with both ends of the T-valve at the end of the water supply hose supplied with the cooker.

③ Insert the opposite end of the water supply hose into the inlet at the bottom of the back of the cooker.

For the spot connected to the faucet directly

① Attach water connection socket to water supply.(Need to buy a socket saperately)

② Insert water supply hose end (with the T-valve removed) supplied with cooker into the socket.

③ Insert the opposite end of water supply hose into the inlet at the bottom of the back of the cooker.

The places ground water is used

① Groundwater contains sediments, which can cause product malfunction.

② If you need to connect the product to the groundwater, you may be provided with a private filter.

③ Please clean the filter periodically.

By using water tank

① Dip one end of the supplied water supply hose into the water tank.

② Insert one end of the water supply hose to the inlet at the bottom of the back of the cooker.

6

How to install

How to use

2. Power connection

Basic usage① Put the food in container and place it on the induction. (raise it by aligning

with outlet and the heating part of induction)② Touch " Water" > " Preparation" > " Start-Stop" buttons in order.

(Basic settings - Operating time : 240sec, Water supply amount : 420cc)If water quantity needs to be increased

Water is supplied while touching "Add Water" button.

If additional heating is required

touch "Preparation" > "Start·Stop" buttons in order.- Can add up to 5 times in 1 minute depending on the number of times

"Time Adjustment" button is touched.- The time add function operates only when it is initialized. (when display number is 000)

What is initialization status?

It is before the start of cooking, or when the cooking is completed, and when display window number indicates 000.

When initialization occurs? "Preparation" button is not touched within 4 minutes after "Water" button is touched. "Start·Stop" button or "Time Adjustment" button is not touched within 1 minute after touching "Preparation" button.

Next button is not touched within 5 seconds after touching various setting buttons.* If "Preparation" button is not touched within for 4 seconds subsequently after touching "Water"

button, other buttons will not be working (touched) until the watering is completed.

How to stop heating and watering during cooking

In order to stop water supply and heating during cooking, touch "Start·Stop" button.

3. Installation check

- Connect the power cord and turn on the power switch. NOTICE: Distribute power consumption to prevent power usage concentration at power connection socket.

- Turn on the power switch.

- Ensure that water enters the electric water heater built into the cooker. (water is supplied when the input/output button blinks)

- If the number displayed on display changes to 000 during counting from 60 to 0, the installation is complete.

- Wait about 15 minutes. (warm water preparation time) and start using it after confirming the installation

7

How to change your settings

Quantity setting change※ The default setting quantity can be changed up to the range of 480cc

in 30cc increments from 210cc.

To use by changing water quantity only once

① Touch "Water Adjustment" button in the initialization state.② When the display shows the amount of water you want, touch "Water">

"Preparation"> "Start·Stop" button within 5 seconds.③ After the selected quantity is supplied, it will be restored to the default quantity.

To change the default quantity

+

① When touching menu selection in the initialization state, it show on display window the number increased by 30cc each time touched from 210cc.

② When the display shows the amount of water you want, touch the "Water Adjustment" button within 5 seconds.

③ Buzzer sound along with set quantity will be blinking 3 times on the display window.

Cooking time setting change※ The default cooking time can be changed up to 300 seconds from 180 seconds

in 30 seconds unit.

+① In the initialization state, touch "Time Adjustment" button until desired number

appears on the display window.② Touch "Add water" button when desired number appears.

8

Notes on use

Measures to be taken in order to prevent failure, damage, burn, short circuit, electric shock and fire

Cautions for containers

In the following cases, stop the operation and contact the vendor

Be careful not to modify or clean the inside of cooker arbitrarily.

Do not open or touch cooker cover while power is connected.

When moving the cooker, first turn off the power and remove water from electric water heater completely.

Fix the cooker firmly not to be tilted before use.

Use the power cord and water supply hose not to be pulled or bent.

Do not shock.

Do not block induction range vents on the bottom and prevent water inflow.

Prevent foreign matter from entering into the gap such as ventilation openings.

Do not use thinner, benzene, wax or chemicals when cleaning.

For water supplied to electric water heaters, the temperature should not exceed 35°C.

If water is flowing from the inside cooker, immediately shut off the power and lock the water supply valve.

If the cooker is not used for more than 48 hours, unplug the power plug and completely remove the water from electric water heater.

Be careful not to burn while draining and cooking.

The foreign substance must be removed from the water supplied to the cooker.

This cooker should be used only for exclusively disposable containers.

Containers must contain water.

Do not cook one container continuously for more than 10 minutes.

If there is no water or if it is heated continuously for 10 minutes or more, there is a risk of fire or breakdown due to overheating.

When the cooker does not operate normally.

When water comes out of the cooker.

When the buzzer continues in the induction range.

9

Error code guide

Error indication

error 1 : Insufficient water quantity - if electric water heater is not completely filled in less than 1 minute > Please turn the power off and on to fill the water.

error 2 : When body temperature rises above 55°C.

error 4 : When ambient temperature of induction case rises above 55 degrees.

error 6 : When touching "Water Adjustment" button for more than 16 seconds (Water cannot be supplied more than 500cc).

10

Passed the food container safety test

Acquired electric safety certification

ISO 9001ISO 14001 certification

Patent 10-1790547 10-1565928 10-1633037Design 30-0922086Brand 40-1195388 40-1195389 40-2017-0102266

Venture company No.20170300290

Enterprise affiliated research institute No.2013112502

Promising Export Firm Promising Small and Medium-Sized Enterprise

No.171001-00411 Global IP Company

Designated as a start-up K-Global 300

Intellectual Property Management CertificationNo.2018-1089

Excellence in Employee Invention PromotionNo.2018-00016

Certification

11

Warranty

1. We guarantee the product as following based on Consumer Dispute Resolution Criteria.

2. In the case of product malfunction, please contact our service center.

Product Instant food cooker

1 year warranty

Model LAZO-2000IH

Purchase date

SER No.

Retail shop

Customeraddress

Name

Contact

Free service

1 . During the warranty period, if any malfunction occurs under normal use in accordance with the contents of the instruction manual, it will be repaired free of charge.

2. Even if it is within the warranty period, the service fee (repair cost, parts cost, travel expenses, etc.) will be charged for the following paid services.

Paid service

1. In the case of malfunction or damage due to user's careless handling.

2. When trouble occurs due to the use of an incorrect electric capacity.

3. When trouble occurs due to repair by someone other than the engineer of our service center.

4. In the case of malfunction due to natural disaster. (damage from fire, salt, flood, and others)

5. In the case of malfunction or damage due to falling (consumer fault) during using the product after installation it.

6. In the case of trouble caused by any internal modifications of the product by the user.

7. When the part itself reaches its end of life.

12

Designed by Dawin co.,Ltd.www.lazo.kr

DATE OF ISSUE 2018. 03. 27.

Instant Food Cooker (LAZO-2000IH)

Dawin co.,Ltd.Business Research Institute Room 610,Jeonbuk Saemanguem Industry University Convergence Center, 189,Sandannambuk-ro, Gunsan-si, Jeollabuk-do, Republic of Korea+82-63-471-0470