Insta cert 4076 uponor underground drainage system pp
2
LICENCE OF CERTIFICATION Date: No./Version: First version granted: Licensee’s name and address Marks covered by licence: Information regarding licensee/manufacturer Licensee’s technical officer Telephone Telefax Email Manufacturer Place of manufacture Product covered by the licence Type of product Standard/Other normative document Specific rules Specification of product The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA- CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products. The licence is valid for one calendar year and is automatically renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version number only if the content and/or conditions of the licence have been changed. The licence is not transferable. MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY Anne Qvintus, Managing Director 2013-07-01 4076-03 Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene with mineral modifiers (PP-MD) according to annex 1. Approved raw materials and sealings according to annex 2. Jaana Hallikas + 358 20 129 211 + 358 20 129 210 [email protected] Plastic pipes Kausala, Finland SBC 14758 SFS-EN 14758 2010-05-24
description
http://www.uponor.fi/~/media/countryspecific/finland/download-centre/certificates/sewer-and-storm/insta-cert-4076-uponor-underground-drainage-system-pp.pdf?version=1
Transcript of Insta cert 4076 uponor underground drainage system pp
LICENCE OF CERTIFICATION
Date: No./Version:
First version granted:
Licensee’s name and address Marks covered by licence:
Information regarding licensee/manufacturer
Licensee’s technical officer
Telephone
Telefax
Manufacturer
Place of manufacture
Product covered by the licence
Type of product
Standard/Other normative document
Specific rules
Specification of product
The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA-CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products.
The licence is valid for one calendar year and is automatically renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version number only if the content and/or conditions of the licence have been changed. The licence is not transferable.
MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY Anne Qvintus, Managing Director
2013-07-01 4076-03
Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene with mineral modifiers (PP-MD) according to annex 1. Approved raw materials and sealings according to annex 2.
Jaana Hallikas + 358 20 129 211 + 358 20 129 210
Plastic pipes
Kausala, Finland
SBC 14758
SFS-EN 14758
2010-05-24
Annex 1 Sivu 1 (1) Licence of certification No. 4076-03 Date 2013-07-01
Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) Test reports and other grounds for licence: Trade name UPONOR PP-MD INSTA-CERT licences 4046 and 4064,
SP F813915A, SP F813915B Product type socket pipe SP FX206017A Ring stiffness SN 4 Application area UD Dimensions, mm 110 - size group 1 Designation of production place B1
