Innovo's products brochures

Description The INNODRIVE 550 and 600 configuration is one of the largest capacity and operationally proven powered reel system available to the Offshore Oil & Gas and Renewable Industry. Used for single or multiple installations of flexible flowlines, umbilicals, mooring wires and power cables ensuring a safe, fast and economical installation.

The INNODRIVE system is capable of handling product installation operations with or without laying tensioner and from a multitude of offshore dynamically positioned or anchored vessel in shallow and ultra deep water depths.

Capabilities • INNODRIVE 550; 550Te

capacity and reel size up to 12mtr O.D.

• INNODRIVE 600; 600Te capacity and reel size up to 14mtr O.D.

• Product Ø capacity 20mm to 300mm.

• Offshore product installation up to sea state 4

• Customised lay configuration to customers’ requirements

• DNV, LR and RINA certified • Containerised shipping and

fast assembly

www.innovoteam.com

ITALY – SLOVENIJA – UK - UAE

INNODRIVE – Powered Reel Drive System

[email protected]

SYSTEM DETAILS: INNODRIVE can be easily client customised with any required auxiliary equipment to suit, such as: Lay Tensioner, Level winder, Control Room, Load Cell System. The flexible design characteristics of INNODRIVE system allow the units to operate from a variety of vessel types and sizes so improving operational flexibility and multiple-reel installation capability all in a safe, fast and economical manner. INNODRIVE is operated by an automatic system and it is DNV, LR and RINA certified. Both the systems can be used for either product laying or retrieval and is operated from its control system monitored constantly by a programmable logic controller (PLC) that guarantees reliability and excellent system performance. There are two operating modes: Master or Slave. When operating in “Master” mode the system manages the product pulling load by a closed loop utilising a load cell. When operated in “Slave” mode the system feeds a laying tensioner ensuring the product remains ‘slack’ between the reel and the tensioner. INNODRIVE is a robust design manufactured from S355 grade carbon steel with sufficient structural resistance to operate to -20°C. Designed to distribute evenly the weight and loads onto the vessel deck. The whole INNODRIVE system was designed to be easily transportable by sea or road in standard open-topped containers to anywhere in the world and even the highest drive towers, which are 9.0 m high, can be assembled or dismantled in one working day. This key feature avoids the need of having to bring a vessel to collect the systems and reduce significantly any mobilization or demobilization time.

INNOVO Specifications and weights provided are for guidance only.

INNODRIVE – Powered Reel Drive System

DIMENSIONS AND WEIGHT:

DESCRIPTION INNODRIVE-550 INNODRIVE-600

Product capacity 550 mT 600 mT

Max reel diameter 12 m OD 14 m OD

Weight 90 mT 100 mT

Length 4.5m 4.8m

Breadth 4.0m 4.2m

Height 8.5m 9.0m

Product diameter 20mm - 300mm 20mm - 300mm

Max pull on hub 140mT 160mT

Max operational sea state Sea state 4 Sea state 4

Max transit sea state (with appropriate seafastening)

Sea state 7 Sea state 8

Laying speed Up to 1600 m/h Up to 1800 m/h

Speed control Full variable control Full variable control

NOTE: Both are able to operate to -20°C

Revision 1

Description INNOREEL has 500mT product loading and it is designed to be loaded with variety of products ranging from subsea umbilicals, flexible pipes, mooring wires and power cables. These can then be installed from INNOREEL itself utilising the INNOVO’s Powered Drive Systems from various installation vessels or barges.

INNOREEL can be designed in different dimensions and weights in order to suit client requirements, up to maximum original design parameters. INNOREEL is supplied with its own dedicated saddle suitable for any short to long term product storage requirement prior to deployment operations.

Capabilities

• Product Ø capacity 20mm to 300mm

• Product loading capacity up to 500mT

• Reel OD range up to 14mtr

• Auxiliary Equipment o Lifting spreader bar o Saddle

www.innovoteam.com

[email protected] ITALY – SLOVENIJA – UK - UAE

INNOREEL – 500mT Reel

SYSTEM DETAILS: INNOREEL has a product capacity of up to 500mT and for mobilization/demobilization the Reel’s dedicated Lifting Spreader Bar is supplied to lift the complete system with product up to product and unit weight of 550mT. The reel assembly consists of an inner hub unit that interfaces to the power drive unit for the deployment of the power cable reel. This manufacture is able to operate to -20°C. Adaptability, INNOREEL is perfectly suitable for any short or long term product storage requirement prior to installation operations, which can be later performed directly from this reel itself once it is mounted to one of INNOVO’s Powered Drive Systems. Certification and testing shall be in accordance to DNV, LR and RINA certification. Along with INNOREEL, an operating system with a full turnkey package can be provided to include pipe handling equipment: tensioners, straighteners, clamps, aligners, rollers and monitoring equipment.

INNOREEL – 500mT Reel


DESCRIPTION INNOREEL

Product Capacity 500 Te

Max reel diameter 14mtr

Internal drum diameter 9mtr

Reel's width 7.5mtr

Weight (empty) 74Te

Hub interface Compatible with worldwide standard systems

Specifications and weights provided are for guidance only. INNOVO

Revision 1

Description INNOVO’s Modular Jack-Up is a reliable alternative for operations in a diverse range of application ranging from dredging operations, pier building activities, ultra heavy-duty fendering, among others.

It consists of an assembly of the modular components known as INNOFLOAT (floating units) and INNOLIFT (lifting modules), both certified by RINA’s marine classification (other certification are available on demand).

This modular approach allows full customization for different Jack-up sizes and pontoon shapes to suit specific Client requirements and operations.

Capabilities

• Operating depth 1mtr to 30mtr water depth

• Lifting capability configurations:

- 1000mT overall lifting

- 2000mT overall lifting

• Jack-up ‘feet’ to suit seabed terrain

INNOVO’s Modular JACK-UP

www.innovoteam.com


SYSTEM DETAILS:

INNOFLOAT is a boxed shaped floating element specifically designed to be assembled, once place on water, into larger systems of variable shapes and dimensions. Each INNOFLOAT is designed to be easily transportable to site, handled by low tonnage crane and assembled without any delay.

INNOLFIT provides the lifting system for INNOVO’s Modular Jack-up, this is comprised by 4 off lifting modules (legs), where each leg would have the lifting capacity of either 500mt/each or 250mt/each depending on the required configuration.

Special Jack-up’s feet can be installed to suit a variety of seabed terrains (rocky, sandy, etc). A back-up system is also available to enable a foot to get disconnected from the Jack-up leg if leg movement becomes restricted by existing soil conditions.

A patented manual/semi-automatic/automatic scenario based on input signal data that is constantly monitored by a programmable logic controller (PLC), guarantees reliability and significant lifting speeds.

The modular Jack-up can be self propelled by adequate outboard motors or it can be tug assisted. Both Jack-up’s modular components INNOFLOAT and INNOLIFT are certified by the Royal Institution of Naval Architects (RINA) and all other certifications are available on demand.

INNOVO’s Modular JACK-UP



Revision 1

DESCRIPTION 500mt Pay Load Jack-up 250mt Pay Load Jack-up

Length overall (LDA) 30m 37m

Breadth 17m 28m

Height 2.89m 2.89m

Leg extensions 36m 48m

Leg diameter 1.95m 1.2m

Payload 500mt 250mt

Description

INNOVO’S Modular pontoon

INNOVO’s modular pontoons are box shaped floating elements which are specifically designed to be assembled, once placed in water, into larger units of extremely variable shape and dimension.

Modular components are known as INNOFLOAT (floating units) and INNOLIFT (lifting modules), both certified by RINA’s marine classification (other certifications are available on demand).

INNOVO’S Ultra Heavy Fenders

INNOVO’S ultra heavy duty fenders are modular pontoon designed and built to face hash water and severe stormy conditions: design and manufacturing are fully certified by RINA.

Capabilities

INNOVO’S modular pontoon are: • Heavy duty; • Resistant; • Verified to work in a jack-up

configuration • Suitable to create barge

configurations of extremely variable shape and dimensions according to the scope of works.

www.innovoteam.com

[email protected]

INNOVO’s Modular PONTOON


SYSTEM DETAILS:

• Single elements are easily transportable so they can be transferred on site by trucks, placed in water and then assembled.

• The pontoon can be self propelled by relevant outboard motors or can be moved using winches.

• In INNOVO’s modular pontoon there are only continuous full penetration welds

• Pontoons have a flat bottom and minimal draft, which makes them suitable for working in very shallow waters (under one metre depth).

• The modular pontoon are design and build according the most demanding requirement of International Association Classification Society.

• A patented manual/semi-automatic/automatic scenario based on input signal data that is constantly monitored by a programmable logic controller (PLC), guarantees reliability and significant lifting speeds.

INNOVO’S Modular PONTOON



Revision 1

INNOFLOAT module

RINA class: C @ HULL

(BV, DNV, GL, LR, ABS, RUSSIAN REGISTER class on demand)

Link for 1,5 and 2 m height module

L [m] B [m] T [m] W [t] Deck Capacity [t/mq]

3/18 3 3 2 3,7 6

6/36 6 3 2 7,2 6

9/54 9 3 2 10,5 6

12/72 12 3 2 13,5 6

INNOLIFT module

RINA certificated

(BV, DNV, GL, LR, ABS, RUSSIAN REGISTER certificated on demand)


INNOLIFT L [m] B [m] T [m] W [t] Lifting Force [t] Spud [in] Spud L/W [m/t]

34-50 3 3 2 14,5 50 34” 6 / 3,2

34-65 3 3 2 15,0 65 34” 6 / 3,2

34-75 3 3 2 20,5 75 34” 6 / 3,2

34-100 3 3 2 20,5 100 34” 6 / 3,2

www.innovoteam.com

[email protected]

INNOVO’s HIGH-CUBE

Description

INNOVO’s High Cube are box shaped floating elements which are specifically designed to be assembled, into larger units of extremely variable shape and dimension.

Modular components are certified by RINA’s marine classification (other certifications are available on demand).

Features

INNOVO’S modular High-Cube are:

• Heavy duty;

• Resistant;

• Characterized by continuous full penetration welds.

T20 HIGH-CUBE


HIGH-CUBE MODULES

RINA class: C @ HULL

(BV, DNV, GL, LR, ABS, RUSSIAN REGISTER class on demand)


L [m] B [m] T [m] W [t] Deck Capacity [t/mq]

T20HC (iso container, 20 feet high cube) 6,06 2,44 2,89 9,8 8

T40HC (iso container, 40 feet high cube) 12,19 2,44 2,89 16,3 8

SYSTEM DETAILS:

• Single elements are easily transportable so they can be transferred on site by trucks.

• The modules can be moved using slings correctly fixed on the high-cube top.

• Each high-cube can be assembled with the all the other high-cube modules typologies by suitable connections.

• The high-cube are design and build according the most demanding requirement of International Association Classification Society.

INNOVO’S High-Cube



Revision 1

L B

T

HIGH-CUBE

INTERNAL FRAME

LIFTING POINT

HIGH-CUBE CONNECTION

SYSTEM

Description The INNOTABLE 2000 is a 2000Te capacity umbilical and cable carousel system for the purpose of installing umbilicals, subsea power cables and telecoms cables in the Offshore Oil & Gas, Telecoms and Renewable Industry ensuring a safe, fast and economical installation.

The INNOTABLE system is capable of handling product installation operations from a multitude of vessels including dynamically positioned or anchored units in harsh environments and both shallow and ultra deep water depths. The system is a high volume and high capacity to suit larger cable diameters, long lengths and high weights.

Capabilities

• INNOTABLE 2000; 2000Te capacity and max 15mtr O.D

• Product Ø capacity 20mm to 300mm.

• Offshore product installation up to sea state 4

• Customised lay configuration to customers’ requirements

• DNV, LR and RINA certified

INNOTABLE 2000 – Powered Carousel System

www.innovoteam.com


SYSTEM DETAILS: The INNOTABLE 2000 can be divided into an inner and outer partition in which two cables can be loaded independently if required. Rotating Table, robust design manufactured from S344 grade carbon steel with sufficient structural resistance to operate to -20°C. Cable outer holding is ensured by modular fences, designed for easy handling and to facilitate mounting/dismounting operations. Cable inner holding is manufactured from adequately re-enforced bent plate with the option of the last portion being conical to suit Client requirements. The table bottom is covered by robust wooden segments to ensure an optimum flat surface for cable positioning. Motorized Drive Units, composed by two electrical motors complete with heater and anti-corrosion system mounted on the Turntable foundation for rapid mobilization/demobilization. The Emergency Breaking System is designed to be installed either to break between Electrical Motor and Gearboxes, or directly on Rotating Table bottom. Foundation, robust design manufactured from S355 grade carbon steel with sufficient structural resistance to operate to -20°C. Designed to distribute evenly the weight and loads of the Turntable onto the vessel deck. Foundation beams designed to be sea-fastened to the vessel deck by robust dedicated brackets. Foundation saddles are designed to allow the Motorized Drive Units to be adjusted as well as easily accessible and controllable. The INNOTABLE 2000 can be supplied complete with INNOVO cable/umbilical management system composed by multi-floor tower to install either electrical/control and/or hydraulic powerpacs, pick-up arm hydraulically drive, tensioner for cable loading/unloading and rollers/bent for cable guiding during its movement from/to turntable.

INNOTABLE 2000 – Turntable (Carousel) Unit Revision 1



Maximum Load Capacity 2000 Metric Tons

Design Accelerations Sea State 4:

Transverse 8m/sec²

Vertical: Gravity ±2.52 Max 12.33 m/sec²

Extreme Diameter of Turntable 15.25m

Outer Diameter of “Basket” (available for cable storage) 15m

Inner Diameter of “Basket” (available for cable storage) 5m

Foundation Envelope Diameter 14.4m

Overall Turntable height (foundation & basket)* 6.49m

Volume of “Basket”(available for cable storage) 645m³

Weight of Rotating Part (Slew Bearing, Wooden Floor, Plated Inner Core & Access Ladder)

105 Metric Tons

Weight of Foundation (Including Drive Units) 55 Metric Tons

C.O.G above deck (Including 30mm Plate) 1.8m

Carousel Speed Step-less 0 to 1.0 RPM

Acceleration (Fully Loaded) 0 to 1.0 RPM in 15 seconds

Retardation (Fully Loaded) 1.0 to 0 RPM in 15 seconds

Emergency Stop (Fully Loaded) 1.0 to 0 RPM in 8 seconds

Frequency Controlled Pinion Drives 2 off @ 38KW

Power Supply 3ph, 440Vac, 60Hz

Description

The modular Turntable system is an equipment assembly constituted by the followings: • GA 2000mT turntable; • Loading arm assembly; • Hinge; • Tower; • Tensioner (5 mT); • Bottom frame assembly; • Tensioner (10 mT); • Chute Assy;

www.innovoteam.com

[email protected]

Modular TURNTABLE System – GA 2000mT turntable

GA 2000mT Turntable

GA 2000mT turntable main features:

• Extreme diameter of carousel = 18.25m;

• Outer diameter of “Basket” = 18.00m;

• Inner diameter of “Basket” (core diameter) = 10.00m;

• Height of “Basket” above carousel floor = 5.785m

• Total weight of carousel = 165mT;

• Max load capacity = 2000mT;

• Power supply: 3ph, 440V, 60Hz

WOODEN

FLOOR

BASKET

CORE


Modular TURNTABLE System – GA 2000mT turntable


Revision 1

Chute Assy

Bottom Frame Assembly

System details

The modular turntable system with carrying capacity up to 2,000 tonnes, loading arm assembly, tensioners, trackways and associated equipment, shall be used for performing cable laying operations. The assembly system shall be positioned on vessels/barges according to operations requirements and in compliance with vessel features and dimension. The assembly system modularity offers the possibility to adapt the system configuration to Client requirements and scope of work.

Tower assembly

TENSIONER

CONTROL CABIN 10’ CONTAINER

4-OFF 20’ CONTAINER

STAIR

ASSEMBLY

LOADING

ARM

HINGE

INNOVO’s Modular TOWER System

www.innovoteam.com

[email protected]

Description

The modular tower system is an equipment assembly constituted by the followings:

• Loading arm assembly;

• Hinge;

• Tower modules (container);

• Control cabin (10’ Container);

• 10T Tensioner;

• Top grillage;

FRONT VIEW SIDE VIEW


INNOVO’S MODULAR TOWER SYSTEM


Revision 1

SISTEM DETAILS

The loading tower assembly system is constituted by 2 main elements:

1. 6-off INNOVO 20’ modular box

2. Modular loading arm characterized by: • Modular trussed sections connected each-other by flanged

couplings: each section is composed by 6” and 4” pipe sizes. • Inside the arm are equally disposed some adjustable rollers

equipped by self-lubricating bearings, to guide the various cables size.

• The arm modularity ensures the system adaptability to different diameter turntables.

• Inner rollers positioning gives to system an high flexibility in term of cable/umbilical sizes.

INNOVO MODULAR BOX L [m] B [m] T [m] W [t] Deck Capacity [t/mq]

20' 6.06 2.44 2.89 9.8 8

MODULAR TRUSSED SECTION

ROLLERS

Innovo's products brochures

Technology

Transcript of Innovo's products brochures