Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the...

28
GF Piping Systems Innovative Drinking Water and Heating System d16-d32 iLITE Quick | Multi | Flow New!

Transcript of Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the...

Page 1: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

GF Piping Systems

Innovative Drinking Water and Heating System d16-d32

iLITEQuick | Multi | Flow

New!

Page 2: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

Destinctive ribbing and reinforcement for a

lightweight design with maximal power

Inspection windowas additional safety

Multi-usable fittingconnects PE-X and ML pipes

Fitting nut for simpleusage of tool

EPDM o-ring providesadditional safety

Cone-shaped fitting nippleexpands the pipe whilepushed onto fitting

2

Properties

iLITE – evolution in axial press technology GF Piping Systems has achieved success with the new iLITE plastic piping system by bringing real innovation to the market in the area of plumbing and heating. This new system offers a quick and safe connection of various piping materials while providing an excellent flow rate at the same time. iLITE is the ideal choice for use in drinking water and heating distribution demonstrated by its long life span.

In comparison to conventional axial press systems, iLITE fittings are delivered with pre-assembled sleeves. There are no loose, individual parts that can get lost. No additional tools or steps are required for the expansion of the pipes. With the innovative design of the cone-shaped fitting nipple, the pipe is expanded by itself while pushing the fitting onto the pipe. This leads to the excellent flow rate. Finally, the pre-assembled sleeve will be pushed in the reverse direction for a safe and tight connection of pipe and fitting. And all of this can easily be accomplished with one tool in a single step.

Page 3: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

3

Quick – 1 tool and 1 stepIn a single step, the fitting and pipe are connected quickly

and easily with just one tool. No more loose spare

parts and no need for calibration or deburring of the pipe.

Additional tools are not necessary to expand the pipe.

Simply connect the pipe and fitting by hand, use the tool,

release with a double click, the connection is made. This

saves time during the installation and space in the tool

case.

Multi-usable fittingThe iLITE fitting is multi-functional for different pipe

materials. Both, full plastic pipes made from crosslinked

polyethylene (PE–Xa/c) as well as multilayer composite

pipes in the dimensions d16-32mm can be connected. No

change of the tool is necessary.

Flow – Excellent flow rateThe innovative design of the cone-shaped fitting nipple

ensures a perfectly circular expansion of the pipe when

pushed onto the fitting. With the fitting nipple, the pipe is

calibrated simultaneously. The sophisticated expansion of

the tube ensures excellent flow rates, low pressure losses

and low noise levels.

Safe connectionAxial sliding sleeve connections are among the safest

connections of pipes and fittings. Through the expansion of

the pipe and the sleeve’s axial pressing, a large sealing

surface is created between the fitting nipple and pipe. The

O-ring provides additional safety. With the inspection

window, the plumber has a simple control mechanism to

check whether the connection is correct and tight.

Connections are immediately ready for pressure. Missed

connections will immediately leak during the pressure test.

Advantages

Page 4: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

4

iLITE

Flexible pipe choice for your application

Multilayer Composite PipesiLITE composite pipes combine the advantages of plastic and

metal. Thanks to the flexibility of the plastic and the stability

of the metal, the pipes are ideally suited for the wide

temperature and pressure range in hot and cold drinking

water systems.

The pipe’s composition is made out of five layers:

an extruded inner layer made out of PE-RT, bonding agent,

longitudinal butt welded aluminium pipe, an additional

bonding layer and an extruded outer layer made out of

PE-RT.

PE-RT was developed by renowned manufacturers precisely

for building technology applications and is approved for use

with food and drinking water.

• Oxygen diffusion resistant and opaque thanks to a butt

welded aluminium layer • High temperature and pressure resistance for use in

heating and sanitary applications• High flexibility and yet stable installation; simple and

economical workmanship • Resistant to numerous chemicals• Low thermal expansion comparable to metal pipes

Pipes

Protective layer made of PE-RT

Bonding layer

Homogeneous longitudinal butt - welded aluminum pipe

Bonding layer

Pipe wall madeof PE-RT

PE-X PipesPE-X pipes consist of three-dimensionally cross-linked

polyethylene and is commonly used in hot and cold water

pipework systems. The cross-linking provides an

improvement of the creep resistance, low-temperature

impact strength and stress-cracking resistance. Therefore,

it also provides safety in drinking water installations along

with a high level of quality. A characteristic of our PE-X pipe

includes is its low weight, as well as resistance to abrasive

waters, corrosion and deposits. Due to their flexibility, these

pipes are very easy to install and are ideally suited for cold

and hot water installations.

In our product range, multilayer composite pipes and PE-X

pipes are available both as insulated pipe and as a pipe in

pipe version with conduit pipe.

Page 5: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

5

The pipe is cut to length and connected to

the fitting by hand. There is no need for calibration

or deburring of the pipe.

With the cone-shaped design of the fitting nipple,

the pipe is simultaneously expanded while pushed

onto the fitting.

The pre-assembled sleeve is pressed in the

opposite direction over the connection.

Due to the self-locking design, the pressed

sleeve prevents potential pulling out of the pipe.

Page 6: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

iLITE

Lightweight with maximal poweriLITE plastic fittings from the high-performance plastic PPSU, also commonly used in air and space travel, are lightweight and nevertheless extremely sturdy and stable.

PPSU is hygienic, resistant to corrosion, durable and therefore an ideal choice for your installation. The unique construction and design with distinctive ribbing is the result of decades of experience in the development of drinking water systems. This patented design enables finding the optimal weight-stability proportion for the fittings. Consequentially the result for the customer is a competitive price and simultaneously a high level of quality. The fittings have a smooth inner surface and are fabricated as one part and from one material.

PPSU Fittings

• Pre-assembled sleeves with inspection window• Low pressure losses• Reinforcement thanks to distinctive ribbing• Good impact strength

6

Page 7: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

Our iLITE threaded fittings consist of a hygienic, drinking

water quality brass alloy that is listed on the Federal

Environment Agency (UBA)’s published positive list.

The fitting nipple of all metal fittings is provided with plastic

protective caps to prevent transport damage.

Threaded Fittings

Special fittings

ReductionReduce direct on

the fitting

Double SocketDirect fitting to fitting connection Cap

Closing direct on the fitting

detachable and reusable

• Easy installation by hand• Detachable and reusable

7

• UBA-compliant brass• Pre-assembled sleeves with inspection window• Low pressure losses • Plastic protective cap to prevent transport damage • Spacer to avoid contact corrosion

Page 8: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

The basis of our iLITE battery tool originate from a renowned tool

maker with longstanding experience and expertise in the tool

manufacturing industry.

This basis tool has already established and proved its quality

on the market. This handy and lightweight tool for single-

hand operation has an ergonomic handle, a battery with a

very short charging time and is captivating with its reliability

and high quality of workmanship.

Optimised and modified for the iLITE system, the battery tool

has two holding fixtures for the fitting jaws, an optical check on

the tool head, which immediately indicates whether the tool is

in the initial position, a double spring for a full return into initial

position and release with a simple double click.

The GF patented pair of jaws are a masterpiece of Swiss

engineering. The system’s intelligence lays within the tool jaws

in combination with the sophisticated fitting design.

The expanding of the pipes and the two axial movements in the

opposite direction are put into one step using one tool.

Tool

8

iLITE

The intelligence is in the toolFor the connection of the iLITE pipes and fittings, only one tool is needed. Per dimension, there is a pair of jaws consisting of a fitting mounting and a pipe clamping jaw.

Jaw Holding Fixture

Pipe Clamping

Fitting Mounting

Makita Battery

Optical Check

15min charging time for 200 cycles (d20)

Page 9: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

9

Page 10: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

Technical Data

Operating pressure max. 10 bar

Temperature range 0°-70°C in continious operation, short- term up to 95°C

Life span 50 years (DVGW)

Dimensions d16 - 32mm

Materials Plastic Body PPSU (Polyphenylsulfone)

High resistance to chemicals, good impact strength,

and inherent fire resistance

Sliding Sleeve PA6GF30 (glass fibre reinforced polyamide)

Threaded Fittings Brass – UBA compliant

Multilayer Pipe PE-RT / AL / PE-RT (Polyethylene Raised-Temperature)

Plastic Pipe PE-X (cross-linked Polyethylen)

Standards Pipes DVGW W542 (multi-layer composite pipe)

EN ISO 21003 (multi-layer composite pipe)

EN ISO 15875 (PE-X pipe)

Fittings DVGW W534

EN ISO 21003-5

System Permissions Registration number: DW8501CSO320

CSTB, WRAS and IIP in Process

10

iLITE

Compliance to standards and one of the safest connections make iLITE the number one choice

Page 11: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

11

iLITE

Convincing quality

GF Piping Systems is one of the leading suppliers of plastic

and metal pipes with a global presence with more than

60,000 products and over 200 years of experience in

research and development. We aspire to deliver our

customers only products with a consistent, excellent level of

quality.

Quality provides security and is the basis for trust. By

systematically integrating business partners and suppliers,

we pursue a holistic approach to quality, thus warranting a

binding claim to quality along the entire value-added chain.

Like other GF Piping Systems products, our iLITE System is

developed, produced, and tested for compliance with all

relevant norms and standards.

For example, the weld seam of all multilayer pipes is directly

tested during the production process inline. Likewise, a

100% inspection of the internal diameter of the finished

pipes is examined with a special ball.

Thermal shock tests, internal pressure creep testing and

bending tests analyse and show the excellent combination of

the iLITE pipe and fitting and the security of the connection.

With the burst test, it is clearly visible that with a burst

pressure between 130 bar and 245 bar, iLITE PPSU fittings

withstand more than 10 times of the normal pipeline

pressure. They provide security against pressure surges

thanks to an intelligent design with ribbing and fitting

reinforcements in critical areas.

Pipeline pressure

max. 10 bar

Burst pressure

min. 130 bar

Burst pressure

max. 245 bar

Page 12: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

12

Made for you

Page 13: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

PipesMulitlayer pipes

iLITE Multilayer pipe

• Description: in bars• Material: PE-RT / AL / PE-RT 

d(mm)

DN(mm)

JRGCode

GFCode

Weight(kg ⁄ m)

l(m)

s(mm)

16 12 E600.016 351 816 802 0.129 5 2.0020 15 E600.020 351 820 802 0.202 5 2.5026 20 E600.026 351 826 802 0.296 5 3.0032 25 E600.032 351 832 802 0.365 5 3.00

iLITE Multilayer pipe

• Description: in coils• Material: PE-RT / AL / PE-RT 

d(mm)

DN(mm)

JRGCode

GFCode

Weight(kg ⁄ m)

l(m)

s(mm)

16 12 E604.016 351 816 814 0.129 100 2.0020 15 E604.020 351 820 814 0.202 50 2.5026 20 E604.026 351 826 814 0.296 50 3.0032 25 E604.032 351 832 814 0.365 50 3.00

iLITE Multilayer pipe, insulated 6mm

• Description: in coils• Material: PE-RT / AL / PE-RT, insulation W/mK 0.040 

d(mm)

DN(mm)

JRGCode

GFCode

Weight(kg ⁄ m)

d1(mm)

l(m)

s(mm)

s1(mm)

Thermal conductivity(W ⁄ mK)

16 12 E606.016 351 816 835 0.152 28 50 2.00 6 0.04020 15 E606.020 351 820 835 0.225 32 50 2.50 6 0.04026 20 E606.026 351 826 835 0.326 38 50 3.00 6 0.040

13

iLITE

Mulitlayer composite pipes

Page 14: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

iLITE Multilayer pipe, insulated 10mm

• Description: in coils• Material: PE-RT / AL / PE-RT, insulation W/mK 0.040 

d(mm)

DN(mm)

JRGCode

GFCode

Weight(kg ⁄ m)

d1(mm)

l(m)

s(mm)

s1(mm)

Thermal conductivity(W ⁄ mK)

16 12 E606.116 351 816 836 0.164 36 50 2.00 10 0.04020 15 E606.120 351 820 836 0.239 40 50 2.50 10 0.04026 20 E606.126 351 826 836 0.338 46 50 3.00 10 0.04032 25 E606.132 351 832 836 0.431 52 25 3.00 10 0.040

iLITE Multilayer pipe, insulated 6mm

• Description: in coils• Material: PE-RT / AL / PE-RT, insulation W/mK 0.035 

d(mm)

DN(mm)

JRGCode

GFCode

Weight(kg ⁄ m)

d1(mm)

l(m)

s(mm)

s1(mm)

Thermal conductivity(W ⁄ mK)

16 12 E608.016 351 816 735 0.160 28 50 2.00 6 0.03520 15 E608.020 351 820 735 0.224 32 50 2.50 6 0.03526 20 E608.026 351 826 735 0.325 38 50 3.00 6 0.035

iLITE Multilayer pipe, insulated 10mm

• Description: in coils• Material: PE-RT / AL / PE-RT, insulation W/mK 0.035 

d(mm)

DN(mm)

JRGCode

GFCode

Weight(kg ⁄ m)

d1(mm)

l(m)

s(mm)

s1(mm)

Thermal conductivity(W ⁄ mK)

16 12 E608.116 351 816 736 0.166 36 50 2.00 10 0.03520 15 E608.120 351 820 736 0.239 40 50 2.50 10 0.03526 20 E608.126 351 826 736 0.325 46 50 3.00 10 0.035

14

iLITE

Mulitlayer composite pipes

Page 15: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

iLITE Multilayer pipe, insulated 20mm

• Description: in coils• Material: PE-RT / AL / PE-RT, insulation W/mK 0.035 

d(mm)

DN(mm)

JRGCode

GFCode

Weight(kg ⁄ m)

d1(mm)

l(m)

s(mm)

s1(mm)

Thermal conductivity(W ⁄ mK)

16 12 E608.216 351 816 737 0.222 36 50 2.00 20 0.03520 15 E608.220 351 820 737 0.296 40 50 2.50 20 0.03526 20 E608.226 351 826 737 0.401 46 25 3.00 20 0.035

iLITE Multilayer pipe, with protection pipe

• Description: in coils• Material: PE-RT / AL / PE-RT 

d(mm)

DN(mm)

JRGCode

GFCode

Weight(kg ⁄ m)

d1(mm)

l(m)

s(mm)

16 12 E602.016 351 816 834 0.204 25 50 2.0020 15 E602.020 351 820 834 0.294 30 50 2.50

15

iLITE

Mulitlayer composite pipes

Page 16: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

16

iLITE

PE-X pipesPE-X pipes

JRG Sanipex PE-X pipe, blue

• Description: in coils• Material: PE-Xc 

d(mm)

DN(mm)

JRGCode

GFCode

Weight(kg)

L(m)

s(mm)

16 12 5717.016 355 516 316 12.000 100 2.220 15 5717.020 355 516 320 8.600 50 2.8

JRG Sanipex PE-X pipe, blue, with protection pipe 

• Description: in coils• Material: PE-Xc 

d(mm)

DN(mm)

JRGCode

GFCode

Weight(kg)

d1(mm)

L(m)

s(mm)

16 12 5716.016 355 516 317 9.500 25 50 2.220 15 5716.020 355 516 321 13.100 29 50 2.8

Page 17: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

17

iLITE

Fittings FittingsPPSU

Coupler

• Material: PPSU d

(mm)JRG

CodeGF

CodeWeight

(kg)l1

(mm)z1

(mm)

16 E690.016 351 816 920 0.010 51 920 E690.020 351 820 920 0.018 61 1326 E690.026 351 826 920 0.032 72 1432 E690.032 351 832 920 0.058 88 18

Elbow 90°

• Material: PPSU d

(mm)JRG

CodeGF

CodeWeight

(kg)l1

(mm)l2

(mm)z1

(mm)z2

(mm)

16 E670.016 351 816 922 0.013 39 39 18 1820 E670.020 351 820 922 0.024 48 48 24 2426 E670.026 351 826 922 0.045 58 58 29 2932 E670.032 351 832 922 0.084 71 71 36 36

T-piece equal

• Material: PPSU d-d-d

(mm)JRG

CodeGF

CodeWeight

(kg)

16 - 16 - 16 E650.016 351 816 921 0.01920 - 20 - 20 E650.020 351 820 921 0.03526 - 26 - 26 E650.026 351 826 921 0.06632 - 32 - 32 E650.032 351 832 921 0.123

d-d-d(mm)

d1(mm)

d2(mm)

d3(mm)

l1(mm)

l2(mm)

l3(mm)

z1(mm)

z2(mm)

z3(mm)

16 - 16 - 16 16 16 16 39 39 39 18 18 1820 - 20 - 20 20 20 20 48 48 48 24 24 2426 - 26 - 26 26 26 26 58 58 58 29 29 2932 - 32 - 32 32 32 32 71 71 71 36 36 36

Page 18: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

18

iLITE

Fittings T-piece reduced

• Material: PPSU d-d-d

(mm)JRG

CodeGF

CodeWeight

(kg)

20 - 16 - 16 E652.110 351 820 934 0.02620 - 16 - 20 E652.112 351 820 931 0.03026 - 16 - 26 E652.214 351 826 931 0.05226 - 20 - 20 E652.218 351 826 934 0.04826 - 20 - 26 E652.220 351 826 932 0.05732 - 20 - 32 E652.324 351 832 932 0.09832 - 26 - 32 E652.330 351 832 933 0.107

d-d-d(mm)

d1(mm)

d2(mm)

d3(mm)

l1(mm)

l2(mm)

l3(mm)

z1(mm)

z2(mm)

z3(mm)

20 - 16 - 16 20 16 16 42 42 48 21 21 2420 - 16 - 20 20 16 20 48 42 48 24 21 2426 - 16 - 26 26 16 26 58 46 58 29 25 2926 - 20 - 20 26 20 20 52 52 58 28 28 2926 - 20 - 26 26 20 26 58 52 58 29 28 2932 - 20 - 32 32 20 32 71 57 71 36 33 3632 - 26 - 32 32 26 32 71 63 71 36 34 36

Double Socket

• Description: reusable• Material: PPSU 

d(mm)

JRGCode

GFCode

Weight(kg)

l1(mm)

z1(mm)

16 E692.016 351 816 940 0.014 51 3020 E692.020 351 820 940 0.020 61 3726 E692.026 351 826 940 0.028 72 4332 E692.032 351 832 940 0.037 87 52

Cap

• Description: reusable• Material: PPSU 

d(mm)

JRGCode

GFCode

Weight(kg)

l1(mm)

z1(mm)

16 E695.016 351 816 904 0.008 31 1020 E695.020 351 820 904 0.012 38 1426 E695.026 351 826 904 0.020 45 1632 E695.032 351 832 904 0.070 55 20

Page 19: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

19

iLITE

Fittings

iLITE

Fittings

Reduction

• Description: reusable• Material: PPSU 

d(mm)

JRGCode

GFCode

Weight(kg)

d1(mm)

l1(mm)

z1(mm)

16 E730.200 351 820 926 0.000 20 59 616 E730.202 351 826 926 0.012 26 65 820 E730.204 351 826 927 0.020 26 71 920 E730.208 351 832 927 0.030 32 78 1026 E730.210 351 832 928 0.035 32 84 11

DZR brass

Pipe outlet, single

• Material: brass, dezincification resistant  d1

(mm)JRG

CodeGF

CodeWeight

(kg)

16 E615.135 351 816 794 0.11820 E615.235 351 820 794 0.137

d1(mm)

d3 G(inch)

d4(mm)

d5(mm)

l(mm)

l1(mm)

l3(mm)

l4(mm)

l5(mm)

l6(mm)

z1(mm)

16 1∕2 6.4 40 40 44 22 18 15 21 2320 1∕2 6.4 40 40 50 22 18 15 21 26

Pipe outlet, double

• Material: brass, dezincification resistant  d-d

(mm)JRG

CodeGF

CodeWeight

(kg)

16 - 16 E616.150 351 816 781 0.00120 - 20 E616.170 351 820 781 0.001

d1(mm)

d2(mm)

d3 G(inch)

d4(mm)

d5(mm)

d6(mm)

l(mm)

l1(mm)

l2(mm)

l3(mm)

l4(mm)

l5(mm)

l6(mm)

z1(mm)

z2(mm)

16 16 1∕2 7 40 52 50 64 64 31 19 15 40 43 4320 20 1∕2 7 40 52 50 69 69 31 19 16 40 45 45

Wall penetration, single

• Material: brass, dezincification resistant  d

(mm)GN

(inch)JRG

CodeGF

CodeWeight

(kg)

16 1∕2 E625.140 351 816 751 0.210

d(mm)

GN(inch)

d1(mm)

d3 Rp(inch)

d4(mm)

d5(mm)

d6 G(inch)

l(mm)

l1(mm)

l3(mm)

z1(mm)

16 1∕2 16 1∕2 7 40 3∕4 45 50 65 33

Page 20: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

20

iLITE

Fittings

DZR brass

Pipe outlet, single

• Material: brass, dezincification resistant  d1

(mm)JRG

CodeGF

CodeWeight

(kg)

16 E615.135 351 816 794 0.11820 E615.235 351 820 794 0.137

d1(mm)

d3 G(inch)

d4(mm)

d5(mm)

l(mm)

l1(mm)

l3(mm)

l4(mm)

l5(mm)

l6(mm)

z1(mm)

16 1∕2 6.4 40 40 44 22 18 15 21 2320 1∕2 6.4 40 40 50 22 18 15 21 26

Pipe outlet, double

• Material: brass, dezincification resistant  d-d

(mm)JRG

CodeGF

CodeWeight

(kg)

16 - 16 E616.150 351 816 781 0.00120 - 20 E616.170 351 820 781 0.001

d1(mm)

d2(mm)

d3 G(inch)

d4(mm)

d5(mm)

d6(mm)

l(mm)

l1(mm)

l2(mm)

l3(mm)

l4(mm)

l5(mm)

l6(mm)

z1(mm)

z2(mm)

16 16 1∕2 7 40 52 50 64 64 31 19 15 40 43 4320 20 1∕2 7 40 52 50 69 69 31 19 16 40 45 45

Wall penetration, single

• Material: brass, dezincification resistant  d

(mm)GN

(inch)JRG

CodeGF

CodeWeight

(kg)

16 1∕2 E625.140 351 816 751 0.210

d(mm)

GN(inch)

d1(mm)

d3 Rp(inch)

d4(mm)

d5(mm)

d6 G(inch)

l(mm)

l1(mm)

l3(mm)

z1(mm)

16 1∕2 16 1∕2 7 40 3∕4 45 50 65 33

Wall penetration, double

• Material: brass, dezincification resistant  d-d

(mm)GN

(inch)JRG

CodeGF

CodeWeight

(kg)

16 - 16 1∕2 E626.140 351 816 761 0.010

d-d(mm)

d1(mm)

d2(mm)

d3 Rp(inch)

d4(mm)

d5(mm)

d6 G(inch)

l(mm)

l1(mm)

l2(mm)

l3(mm)

z1(mm)

z2(mm)

16 - 16 16 16 1∕2 7 40 3∕4 45 54 54 65 33 33

Manifold 2-way

• Material: brass, dezincification resistant  d

(mm)JRG

CodeGF

CodeWeight

(kg)d1 R(inch)

l1(mm)

l2(mm)

l3(mm)

l4(mm)

l5(mm)

z1(mm)

16 E645.216 351 816 766 0.333 3∕4 126 46 36 55 35 25 3620 E645.220 351 820 766 0.383 3∕4 126 52 36 55 35 28 36

Manifold 3-way

• Material: brass, dezincification resistant  d

(mm)JRG

CodeGF

CodeWeight

(kg)d1 Rp

(inch)l1

(mm)l2

(mm)l3

(mm)l4

(mm)l5

(mm)z1

(mm)⎔

16 E645.316 351 816 767 0.469 3∕4 181 46 36 55 35 25 3620 E645.320 351 820 767 0.532 3∕4 181 52 36 55 35 28 36

Reduction

• Material: brass, dezincification resistant  d1-d(mm)

JRGCode

GFCode

Weight(kg)

d(mm)

d1(mm)

l1(mm)

z1(mm)

20-16 E735.100 351 820 743 0.067 16 20 65 1926-16 E735.102 351 826 743 0.110 16 26 71 2126-20 E735.104 351 826 744 0.122 20 26 76 2332-20 E735.108 351 832 744 0.200 20 32 85 2632-26 E735.110 351 832 745 0.224 26 32 90 27

Page 21: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

21

Wall penetration, double

• Material: brass, dezincification resistant  d-d

(mm)GN

(inch)JRG

CodeGF

CodeWeight

(kg)

16 - 16 1∕2 E626.140 351 816 761 0.010

d-d(mm)

d1(mm)

d2(mm)

d3 Rp(inch)

d4(mm)

d5(mm)

d6 G(inch)

l(mm)

l1(mm)

l2(mm)

l3(mm)

z1(mm)

z2(mm)

16 - 16 16 16 1∕2 7 40 3∕4 45 54 54 65 33 33

Manifold 2-way

• Material: brass, dezincification resistant  d

(mm)JRG

CodeGF

CodeWeight

(kg)d1 R(inch)

l1(mm)

l2(mm)

l3(mm)

l4(mm)

l5(mm)

z1(mm)

16 E645.216 351 816 766 0.333 3∕4 126 46 36 55 35 25 3620 E645.220 351 820 766 0.383 3∕4 126 52 36 55 35 28 36

Manifold 3-way

• Material: brass, dezincification resistant  d

(mm)JRG

CodeGF

CodeWeight

(kg)d1 Rp

(inch)l1

(mm)l2

(mm)l3

(mm)l4

(mm)l5

(mm)z1

(mm)⎔

16 E645.316 351 816 767 0.469 3∕4 181 46 36 55 35 25 3620 E645.320 351 820 767 0.532 3∕4 181 52 36 55 35 28 36

Reduction

• Material: brass, dezincification resistant  d1-d(mm)

JRGCode

GFCode

Weight(kg)

d(mm)

d1(mm)

l1(mm)

z1(mm)

20-16 E735.100 351 820 743 0.067 16 20 65 1926-16 E735.102 351 826 743 0.110 16 26 71 2126-20 E735.104 351 826 744 0.122 20 26 76 2332-20 E735.108 351 832 744 0.200 20 32 85 2632-26 E735.110 351 832 745 0.224 26 32 90 27

iLITE

Fittings

Adapter with loose nut

• Material: brass, dezincification resistant • Connection: male thread 

d(mm)

d1 G(inch)

JRGCode

GFCode

Weight(kg)

l1(mm)

z1(mm)

16 1∕2 E705.100 351 816 746 0.067 46 25 2416 3∕4 E705.102 351 816 747 0.097 48 27 3020 1∕2 E705.110 351 820 746 0.090 52 28 2420 3∕4 E705.112 351 820 747 0.117 54 30 3026 3∕4 E705.122 351 826 747 0.141 60 31 3026 1 E705.124 351 826 748 0.179 63 34 3732 1 E705.134 351 832 748 0.240 71 36 3732 1 1∕4 E705.136 351 832 749 0.330 75 40 46

Transition fitting

• Material: brass, dezincification resistant • Connection: male thread 

d(mm)

d1 R(inch)

JRGCode

GFCode

Weight(kg)

l1(mm)

z1(mm)

16 1∕2 E715.110 351 816 795 0.035 49 28 2216 3∕4 E715.150 351 816 796 0.095 50 29 3220 1∕2 E715.210 351 820 795 0.072 54 30 2220 3∕4 E715.220 351 820 796 0.114 56 32 3226 3∕4 E715.250 351 826 795 0.135 61 32 3226 1 E715.260 351 826 796 0.178 65 36 3632 1 E715.310 351 832 795 0.234 74 39 36

Transition fitting

• Material: brass, dezincification resistant • Connection: female thread 

d(mm)

d1 G(inch)

JRGCode

GFCode

Weight(kg)

GN(mm)

l1(mm)

z1(mm)

16 1∕2 E717.110 351 816 797 0.065 1/2-16 45 12 2716 3∕4 E717.150 351 816 798 0.083 3/4-16 48 13 3220 1∕2 E717.210 351 820 797 0.076 1/2-20 49 13 2720 3∕4 E717.220 351 820 798 0.103 3/4-20 53 15 3226 3∕4 E717.250 351 826 798 0.121 3/4-26 57 14 3226 1 E717.260 351 826 799 0.154 1-26 61 17 3932 1 E717.310 351 832 799 0.216 1-32 68 18 39

Elbow 90°

• Material: brass, dezincification resistant • Connection: male thread 

d1-d(mm)

JRGCode

GFCode

Weight(kg)

d(mm)

d1 R(inch)

l1(mm)

l2(mm)

z1(mm)

1/2-16 E677.110 351 816 775 0.073 16 1∕2 45 28 24 161/2-20 E677.210 351 820 775 0.099 20 1∕2 50 31 26 183/4-20 E677.220 351 820 776 0.112 20 3∕4 54 32 30 183/4-26 E677.250 351 826 776 0.163 26 3∕4 59 36 30 24

1-32 E677.310 351 832 777 0.288 32 1 73 42 38 30

Page 22: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

Reduction

• Description: reusable• Material: PPSU 

d(mm)

JRGCode

GFCode

Weight(kg)

d1(mm)

l1(mm)

z1(mm)

16 E730.200 351 820 926 0.000 20 59 616 E730.202 351 826 926 0.012 26 65 820 E730.204 351 826 927 0.020 26 71 920 E730.208 351 832 927 0.030 32 78 1026 E730.210 351 832 928 0.035 32 84 11

22

iLITE

Fittings

Adapter with loose nut

• Material: brass, dezincification resistant • Connection: male thread 

d(mm)

d1 G(inch)

JRGCode

GFCode

Weight(kg)

l1(mm)

z1(mm)

16 1∕2 E705.100 351 816 746 0.067 46 25 2416 3∕4 E705.102 351 816 747 0.097 48 27 3020 1∕2 E705.110 351 820 746 0.090 52 28 2420 3∕4 E705.112 351 820 747 0.117 54 30 3026 3∕4 E705.122 351 826 747 0.141 60 31 3026 1 E705.124 351 826 748 0.179 63 34 3732 1 E705.134 351 832 748 0.240 71 36 3732 1 1∕4 E705.136 351 832 749 0.330 75 40 46

Transition fitting

• Material: brass, dezincification resistant • Connection: male thread 

d(mm)

d1 R(inch)

JRGCode

GFCode

Weight(kg)

l1(mm)

z1(mm)

16 1∕2 E715.110 351 816 795 0.035 49 28 2216 3∕4 E715.150 351 816 796 0.095 50 29 3220 1∕2 E715.210 351 820 795 0.072 54 30 2220 3∕4 E715.220 351 820 796 0.114 56 32 3226 3∕4 E715.250 351 826 795 0.135 61 32 3226 1 E715.260 351 826 796 0.178 65 36 3632 1 E715.310 351 832 795 0.234 74 39 36

Transition fitting

• Material: brass, dezincification resistant • Connection: female thread 

d(mm)

d1 G(inch)

JRGCode

GFCode

Weight(kg)

GN(mm)

l1(mm)

z1(mm)

16 1∕2 E717.110 351 816 797 0.065 1/2-16 45 12 2716 3∕4 E717.150 351 816 798 0.083 3/4-16 48 13 3220 1∕2 E717.210 351 820 797 0.076 1/2-20 49 13 2720 3∕4 E717.220 351 820 798 0.103 3/4-20 53 15 3226 3∕4 E717.250 351 826 798 0.121 3/4-26 57 14 3226 1 E717.260 351 826 799 0.154 1-26 61 17 3932 1 E717.310 351 832 799 0.216 1-32 68 18 39

Elbow 90°

• Material: brass, dezincification resistant • Connection: male thread 

d1-d(mm)

JRGCode

GFCode

Weight(kg)

d(mm)

d1 R(inch)

l1(mm)

l2(mm)

z1(mm)

1/2-16 E677.110 351 816 775 0.073 16 1∕2 45 28 24 161/2-20 E677.210 351 820 775 0.099 20 1∕2 50 31 26 183/4-20 E677.220 351 820 776 0.112 20 3∕4 54 32 30 183/4-26 E677.250 351 826 776 0.163 26 3∕4 59 36 30 24

1-32 E677.310 351 832 777 0.288 32 1 73 42 38 30

Elbow 90°

• Material: brass, dezincification resistant • Connection: female thread 

d1-d(mm)

JRGCode

GFCode

Weight(kg)

d(mm)

d1 G(inch)

l1(mm)

l2(mm)

z1(mm)

z2(mm)

1/2-16 E676.110 351 816 773 0.099 16 1∕2 44 33 23 20 271/2-20 E676.210 351 820 773 0.122 20 1∕2 50 34 26 21 273/4-20 E676.220 351 820 774 0.141 20 3∕4 52 36 28 21 323/4-26 E676.250 351 826 774 0.182 26 3∕4 58 37 29 22 32

1-32 E676.310 351 832 775 0.306 32 1 70 40 36 25 39

T-Piece

• Material: brass, dezincification resistant • Connection: female thread 

d-d(mm)

d1 G(inch)

JRGCode

GFCode

Weight(kg)

16 - 16 1∕2 E659.110 351 816 754 0.13020 - 20 1∕2 E659.210 351 820 754 0.16526 - 26 1∕2 E659.220 351 826 754 0.24326 - 26 3∕4 E659.250 351 826 755 0.26632 - 32 1∕2 E659.290 351 832 754 0.34532 - 32 3∕4 E659.310 351 832 755 0.41132 - 32 1 E659.330 351 832 756 0.455

d1(mm)

d2 G(inch)

d3(mm)

l(mm)

l1(mm)

l2(mm)

l3(mm)

z1(mm)

z2(mm)

z3(mm)

16 1∕2 16 88 44 33 44 23 20 23 2720 1∕2 20 100 50 34 50 26 21 26 2726 1∕2 26 111 56 37 56 30 24 30 2726 3∕4 26 116 58 37 58 27 22 27 3232 1∕2 32 129 65 40 65 29 27 29 2732 3∕4 32 134 67 40 67 32 25 32 3232 1 32 141 71 40 71 36 25 36 39

Transition Fitting

• Material: stainless steel• Connection: Radial press - iLITE 

d-d1(mm)

JRGCode

GFCode

Weight(kg)

d(mm)

d1(mm)

l1(mm)

z1(mm)

16 - 15 E716.100 351 816 791 0.040 16 15 49 2816 - 18 E716.101 351 816 792 0.046 16 18 50 2920 - 18 E716.104 351 820 791 0.068 20 18 54 3020 - 22 E716.105 351 820 792 0.074 20 22 56 32

Page 23: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

23

Elbow 90°

• Material: brass, dezincification resistant • Connection: female thread 

d1-d(mm)

JRGCode

GFCode

Weight(kg)

d(mm)

d1 G(inch)

l1(mm)

l2(mm)

z1(mm)

z2(mm)

1/2-16 E676.110 351 816 773 0.099 16 1∕2 44 33 23 20 271/2-20 E676.210 351 820 773 0.122 20 1∕2 50 34 26 21 273/4-20 E676.220 351 820 774 0.141 20 3∕4 52 36 28 21 323/4-26 E676.250 351 826 774 0.182 26 3∕4 58 37 29 22 32

1-32 E676.310 351 832 775 0.306 32 1 70 40 36 25 39

T-Piece

• Material: brass, dezincification resistant • Connection: female thread 

d-d(mm)

d1 G(inch)

JRGCode

GFCode

Weight(kg)

16 - 16 1∕2 E659.110 351 816 754 0.13020 - 20 1∕2 E659.210 351 820 754 0.16526 - 26 1∕2 E659.220 351 826 754 0.24326 - 26 3∕4 E659.250 351 826 755 0.26632 - 32 1∕2 E659.290 351 832 754 0.34532 - 32 3∕4 E659.310 351 832 755 0.41132 - 32 1 E659.330 351 832 756 0.455

d1(mm)

d2 G(inch)

d3(mm)

l(mm)

l1(mm)

l2(mm)

l3(mm)

z1(mm)

z2(mm)

z3(mm)

16 1∕2 16 88 44 33 44 23 20 23 2720 1∕2 20 100 50 34 50 26 21 26 2726 1∕2 26 111 56 37 56 30 24 30 2726 3∕4 26 116 58 37 58 27 22 27 3232 1∕2 32 129 65 40 65 29 27 29 2732 3∕4 32 134 67 40 67 32 25 32 3232 1 32 141 71 40 71 36 25 36 39

Transition Fitting

• Material: stainless steel• Connection: Radial press - iLITE 

d-d1(mm)

JRGCode

GFCode

Weight(kg)

d(mm)

d1(mm)

l1(mm)

z1(mm)

16 - 15 E716.100 351 816 791 0.040 16 15 49 2816 - 18 E716.101 351 816 792 0.046 16 18 50 2920 - 18 E716.104 351 820 791 0.068 20 18 54 3020 - 22 E716.105 351 820 792 0.074 20 22 56 32

iLITE

Fittings

Transition Fitting

• Material: polybutylen, brass, dezincification resistant• Connection: INSTAFLEX - iLITE 

d-d1(mm)

JRGCode

GFCode

Weight(kg)

d(mm)

d1(mm)

l1(mm)

z1(mm)

16 - 16 E716.116 351 816 985 0.077 16 16 104 8320 - 20 E716.120 351 820 985 0.109 20 20 113 8925 - 26 E716.126 351 826 985 0.163 25 26 123 9432 - 32 E716.132 351 832 985 0.281 32 32 135 100

Page 24: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

24

iLITE

FittingsNon - DZR brass

Pipe outlet, single

• Material: brass d1

(mm)JRG

CodeGF

CodeWeight

(kg)

16 E610.135 351 816 994 0.11820 E610.235 351 820 994 0.137

d1(mm)

d3 G(inch)

d4(mm)

d5(mm)

l(mm)

l1(mm)

l3(mm)

l4(mm)

l5(mm)

l6(mm)

z1(mm)

16 1∕2 6.4 40 40 41 22 18 15 20 2320 1∕2 6.4 40 40 46 22 18 15 20 26

Manifold 2-way

• Material: brass d

(mm)JRG

CodeGF

CodeWeight

(kg)d1 R(inch)

l1(mm)

l2(mm)

l3(mm)

l4(mm)

l5(mm)

z1(mm)

16 E640.216 351 816 966 0.333 3∕4 126 46 36 55 35 25 3220 E640.220 351 820 966 0.383 3∕4 126 52 36 55 35 25 32

Manifold 3-way

• Material: brass d

(mm)JRG

CodeGF

CodeWeight

(kg)d1 Rp

(inch)l1

(mm)l2

(mm)l3

(mm)l4

(mm)l5

(mm)z1

(mm)⎔

16 E640.316 351 816 967 0.469 3∕4 181 46 36 55 35 28 3620 E640.320 351 820 967 0.532 3∕4 181 52 36 55 35 28 36

Reduction

• Material: brass d1-d(mm)

JRGCode

GFCode

Weight(kg)

d(mm)

d1(mm)

l1(mm)

z1(mm)

20-16 E730.100 351 820 943 0.067 16 20 65 1926-16 E730.102 351 826 943 0.110 16 26 71 2126-20 E730.104 351 826 944 0.122 20 26 76 2332-20 E730.108 351 832 944 0.200 20 32 85 2632-26 E730.110 351 832 945 0.224 26 32 90 27

Page 25: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

25

iLITE

FittingsTransition fitting

• Material: brass• Connection: male thread 

d(mm)

d1 R(inch)

JRGCode

GFCode

Weight(kg)

GN(mm)

l1(mm)

z1(mm)

16 1∕2 E710.110 351 816 995 0.058 d 1/2-16 49 28 2216 3∕4 E710.150 351 816 996 0.095 d 3/4-16 50 29 3220 1∕2 E710.210 351 820 995 0.072 d 1/2-20 54 30 2220 3∕4 E710.220 351 820 996 0.114 d 3/4-20 56 32 3226 3∕4 E710.250 351 826 995 0.135 d 3/4-26 61 32 3226 1 E710.260 351 826 996 0.178 d 1-26 65 36 3632 1 E710.310 351 832 995 0.234 d 1-32 74 39 36

Transition fitting

• Material: brass• Connection: female thread 

d(mm)

d1 G(inch)

JRGCode

GFCode

Weight(kg)

GN(mm)

l1(mm)

z1(mm)

16 1∕2 E712.110 351 816 997 0.065 1/2-16 44 12 2716 3∕4 E712.150 351 816 998 0.083 3/4-16 48 13 3220 1∕2 E712.210 351 820 997 0.076 1/2-20 49 13 2720 3∕4 E712.220 351 820 998 0.103 3/4-20 53 15 3226 3∕4 E712.250 351 826 998 0.121 3/4-26 57 14 3226 1 E712.260 351 826 999 0.154 1-26 61 17 3932 1 E712.310 351 832 999 0.216 1-32 68 18 39

Elbow 90°

• Material: brass• Connection: male thread 

d1-d(mm)

JRGCode

GFCode

Weight(kg)

d(mm)

d1 R(inch)

l1(mm)

l2(mm)

z1(mm)

1/2-16 E672.110 351 816 975 0.073 16 1∕2 45 28 24 161/2-20 E672.210 351 820 975 0.099 20 1∕2 50 31 26 183/4-20 E672.220 351 820 976 0.112 20 3∕4 54 32 30 183/4-26 E672.250 351 826 976 0.163 26 3∕4 59 36 30 24

1-32 E672.310 351 832 977 0.288 32 1 73 42 38 30

Elbow 90°

• Material: brass• Connection: female thread 

d1-d(mm)

JRGCode

GFCode

Weight(kg)

d(mm)

d1 G(inch)

l1(mm)

l2(mm)

z1(mm)

z2(mm)

1/2-16 E671.110 351 816 973 0.099 16 1∕2 44 33 23 20 271/2-20 E671.210 351 820 973 0.122 20 1∕2 50 34 26 21 273/4-20 E671.220 351 820 974 0.141 20 3∕4 52 36 28 21 323/4-26 E671.250 351 826 974 0.182 26 3∕4 58 37 29 22 32

1-32 E671.310 351 832 975 0.306 32 1 71 40 36 25 39

Page 26: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

26

iLITE

Heating

iLITE

Tools

Heating

Bend, nickel plated

• Connection: radiatior d-d

(mm)JRG

CodeGF

CodeWeight

(kg)d1

(mm)d2

(mm)l

(mm)r

(mm)z1

(mm)

16 - 15 E707.016 351 816 984 0.165 16 15 300 30 68

Cross-piece

• Description: isolation box included• Material: brass 

d1(mm)

d2(mm)

d3(mm)

JRGCode

GFCode

Weight(kg)

16 16 16 E664.016 351 816 986 0.91020 20 20 E664.018 351 820 986 1.00020 16 20 E664.020 351 820 987 0.97020 16 16 E664.022 351 820 988 0.940

l1(mm)

l2(mm)

l3(mm)

l4(mm)

b1(mm)

b2(mm)

b3(mm)

h1(mm)

z1(mm)

z2(mm)

z3(mm)

thermal con-ductivity

(W ⁄ mK)

74 74 74 74 50 124 135 50 53 53 53 0.03578 78 78 78 50 128 135 50 54 54 54 0.03578 74 78 78 50 124 135 50 54 53 54 0.03578 74 78 74 50 124 135 50 54 53 53 0.035

ToolsBattery tool

Battery tool kit d16-32

• Consisting of: cordless tool MAPAX2LJRG, jaws d16, d20, d26, d32 d

(mm)JRG

CodeGF

CodeWeight

(kg)l

(mm)b

(mm)h

(mm)

16 - 32 E808.000 351 800 001 10.380 574 170 423

Battery tool kit d16+20

• Consisting of: cordless tool MAPAX2LJRG, jaws d16, d20 d

(mm)JRG

CodeGF

CodeWeight

(kg)l

(mm)b

(mm)h

(mm)

16 - 20 E808.050 351 800 002 7.960 574 170 423

Battery tool d16-d32

d(mm)

JRGCode

GFCode

Weight(kg)

l(mm)

b(mm)

h(mm)

16 - 32 E809.000 351 800 005 3.080 172 74 274

Heating

Bend, nickel plated

• Connection: radiatior d-d

(mm)JRG

CodeGF

CodeWeight

(kg)d1

(mm)d2

(mm)l

(mm)r

(mm)z1

(mm)

16 - 15 E707.016 351 816 984 0.165 16 15 300 30 68

Cross-piece

• Description: isolation box included• Material: brass 

d1(mm)

d2(mm)

d3(mm)

JRGCode

GFCode

Weight(kg)

16 16 16 E664.016 351 816 986 0.91020 20 20 E664.018 351 820 986 1.00020 16 20 E664.020 351 820 987 0.97020 16 16 E664.022 351 820 988 0.940

l1(mm)

l2(mm)

l3(mm)

l4(mm)

b1(mm)

b2(mm)

b3(mm)

h1(mm)

z1(mm)

z2(mm)

z3(mm)

thermal con-ductivity

(W ⁄ mK)

74 74 74 74 50 124 135 50 53 53 53 0.03578 78 78 78 50 128 135 50 54 54 54 0.03578 74 78 78 50 124 135 50 54 53 54 0.03578 74 78 74 50 124 135 50 54 53 53 0.035

Heating

Bend, nickel plated

• Connection: radiatior d-d

(mm)JRG

CodeGF

CodeWeight

(kg)d1

(mm)d2

(mm)l

(mm)r

(mm)z1

(mm)

16 - 15 E707.016 351 816 984 0.165 16 15 300 30 68

Cross-piece

• Description: isolation box included• Material: brass 

d1(mm)

d2(mm)

d3(mm)

JRGCode

GFCode

Weight(kg)

16 16 16 E664.016 351 816 986 0.91020 20 20 E664.018 351 820 986 1.00020 16 20 E664.020 351 820 987 0.97020 16 16 E664.022 351 820 988 0.940

l1(mm)

l2(mm)

l3(mm)

l4(mm)

b1(mm)

b2(mm)

b3(mm)

h1(mm)

z1(mm)

z2(mm)

z3(mm)

thermal con-ductivity

(W ⁄ mK)

74 74 74 74 50 124 135 50 53 53 53 0.03578 78 78 78 50 128 135 50 54 54 54 0.03578 74 78 78 50 124 135 50 54 53 54 0.03578 74 78 74 50 124 135 50 54 53 53 0.035

Page 27: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

27

ToolsBattery tool

Battery tool kit d16-32

• Consisting of: cordless tool MAPAX2LJRG, jaws d16, d20, d26, d32 d

(mm)JRG

CodeGF

CodeWeight

(kg)l

(mm)b

(mm)h

(mm)

16 - 32 E808.000 351 800 001 10.380 574 170 423

Battery tool kit d16+20

• Consisting of: cordless tool MAPAX2LJRG, jaws d16, d20 d

(mm)JRG

CodeGF

CodeWeight

(kg)l

(mm)b

(mm)h

(mm)

16 - 20 E808.050 351 800 002 7.960 574 170 423

Battery tool d16-d32

d(mm)

JRGCode

GFCode

Weight(kg)

l(mm)

b(mm)

h(mm)

16 - 32 E809.000 351 800 005 3.080 172 74 274

Tool jaws

• Material: steel d

(mm)JRG

CodeGF

CodeWeight

(kg)l

(mm)b

(mm)h

(mm)

16 E809.116 351 800 020 0.966 50 42 10020 E809.120 351 800 021 0.870 50 42 10025 E809.125 351 800 024 1.100 50 42 10026 E809.126 351 800 022 1.124 50 42 10032 E809.132 351 800 023 1.054 50 42 100

Battery tool case, empty

• Material: plastic d

(mm)JRG

CodeGF

CodeWeight

(kg)l

(mm)b

(mm)h

(mm)

16 - 32 E828.001 351 800 004 2.000 574 170 423

iLITE

Tools

Page 28: Innovative Drinking Water and Heating System d16-d32 iLITECone-shaped fitting nipple expands the pipe while pushed onto fitting 2 Properties iLITE – evolution in axial press technology

37 430 621. / 02.18 / SMS© Georg Fischer JRG AG Hauptstrasse 130CH-4450 Sissach/Switzerland Telefon +41 (0) 61 975 22 22 [email protected] in Switzerland

GF Piping SystemsGF Piping Systems

Argentina / Southern South AmericaGeorg Fischer Central Plastics Sudamérica S.R.L.Buenos Aires, ArgentinaPhone +54 11 4512 02 90Fax +54 11 4512 02 [email protected]/ar

AustraliaGeorge Fischer Pty LtdRiverwood NSW 2210Phone +61 (0) 2 9502 8000 Fax +61 (0) 2 9502 [email protected]/au

AustriaGeorg Fischer Rohrleitungssysteme GmbH3130 HerzogenburgPhone +43 (0) 2782 856 43 0Fax +43 (0) 2782 856 [email protected]/at

Belgium / LuxembourgGeorg Fischer NV/SA1600 Sint-Pieters-Leeuw / BelgiumPhone +32 (0) 2 556 40 20Fax +32 (0) 2 524 34 [email protected]/be

BrazilGeorg Fischer Sist. de Tub. Ltda.04571-020 São Paulo/SPPhone +55 (0) 11 5525 [email protected]/br

CanadaGeorg Fischer Piping Systems LtdMississauga, ON L5T 2B2Phone +1 (905) 670 8005Fax +1 (905) 670 [email protected]/ca

ChinaGeorg Fischer Piping Systems Ltd201319 ShanghaiPhone +86 21 3899 3899Fax +86 21 3899 3888 [email protected]/cn

Denmark / IcelandGeorg Fischer A/S2630 Taastrup, DenmarkPhone +45 (0) 7022 1975Fax +45 (0) 7022 [email protected]/dk

FinlandGeorg Fischer AB01510 VantaaPhone +358 (0) 9 586 58 25 Fax +358 (0) 9 586 58 [email protected]/fi

FranceGeorg Fischer SAS95932 Roissy Charles de Gaulle CedexPhone +33 (0) 1 41 84 68 84Fax. +33 (0) 1 41 84 68 [email protected]/fr

GermanyGeorg Fischer GmbH73095 Albershausen Phone +49 (0) 7161 302 0Fax +49 (0) 7161 302 25 [email protected]/de

IndiaGeorg Fischer Piping Systems Pvt. Ltd.400 076 Powai, MumbaiPhone +91 22 4007 2000Fax +91 22 4007 [email protected]/in

IndonesiaGeorge Fischer Pte Ltd 41371 Jawa BaratPhone +62 267 432 044Fax +62 267 431 [email protected]/id

ItalyGeorg Fischer S.p.A.20063 Cernusco S/N (MI)Phone +39 02 921 86 1Fax +39 02 921 86 24 7 [email protected]/it

JapanGeorg Fischer Ltd530-0003 Osaka Phone +81 (0) 6 6341 [email protected]/jp

KoreaGeorg Fischer Piping Systems463-824 SeoulPhone +82 31 8017 1450 3Fax +82 31 8017 [email protected]/kr

MalaysiaGeorge Fischer (M) Sdn. Bhd.40460 Shah Alam, Selangor Darul EhsanPhone +60 (0) 3 5122 5585Fax +60 (0) 3 5122 [email protected]/my

Mexico / Northern Latin AmericaGeorg Fischer S.A. de C.V.Apodaca, Nuevo Leon, MexicoPhone +52 (81) 1340 8586Fax +52 (81) 1522 [email protected]/mx

Middle EastGeorg Fischer Piping Systems (Switzerland) LtdDubai, United Arab EmiratesPhone +971 4 289 49 60Fax +971 4 289 49 [email protected]/int

NetherlandsGeorg Fischer N.V.8161 PA EpePhone +31 (0) 578 678 222 Fax +31 (0) 578 621 768 [email protected]/nl

New ZealandGeorg Fischer Ltd5140 Upper HuttPhone +64 (0) 4 527 9813Fax +64 (0) 4 527 9834 [email protected]/nz

NorwayGeorg Fischer AS1351 Rud Phone +47 67 18 29 00Fax +47 67 13 92 [email protected]/no

PhilippinesGeorge Fischer Representative Office1604 Pasig CityPhone +632 571 2365Fax +632 571 [email protected]/sg

PolandGeorg Fischer Sp. z o.o.05 090 Sekocin Nowy Phone +48 (0) 22 3131 050Fax +48 (0) 22 3131 060 [email protected]/pl

RomaniaGeorg Fischer Rohrleitungssysteme (Elvetia) S.A. SUCURSALA BUCURESTI020257 BucurestiPhone +40 311 040 492Fax +40 212 317 [email protected]/int

RussiaGeorg Fischer Piping Systems (Switzerland) LtdMoscow Representative Office125040 MoscowPhone +7 495 748 11 [email protected]/ru

SingaporeGeorge Fischer Pte Ltd528 872 SingaporePhone +65 6747 0611Fax +65 6747 05 [email protected]/sg

Spain / PortugalGeorg Fischer S.A.28046 MadridPhone +34 (0) 91 781 98 90Fax +34 (0) 91 426 08 [email protected]/es

Sweden Georg Fischer AB11743 StockholmPhone +46 (0) 8 506 77 50 0Fax +46 (0) 8 749 23 [email protected]/se

SwitzerlandGeorg Fischer Rohrleitungssysteme (Schweiz) AG8201 SchaffhausenPhone +41 (0)52 631 3026Fax +41 (0)52 631 [email protected]/ch

TaiwanGeorg Fischer Co. Ltd.24158 New Taipei CityPhone +886 2 8512 2822Fax +886 2 8512 [email protected]/tw

TurkeyGeorg Fischer Hakan Plastik Boru ve Profil San. Tic. A.S.59500 Cerkezkoy / TekirdagPhone +90 282 726 64 43Fax +90 282 726 94 [email protected]

United Kingdom / IrelandGeorge Fischer Sales LtdCV2 2ST Coventry, United KingdomPhone +44 (0) 2476 535 535Fax +44 (0) 2476 530 [email protected]/uk

USA /CaribbeanGeorg Fischer LLC92618 IrvinePhone +1 714 731 88 00Fax +1 714 731 62 01Toll Free 800/854 40 [email protected]/us

International Georg Fischer Piping Systems (Switzerland) Ltd8201 SchaffhausenPhone +41 (0) 52 631 3003Fax +41 (0) 52 631 [email protected]/int

Worldwide at homeOur sales companies and representatives ensure local customer support in over 100 countries.

www.gfps.com

The technical data are not binding. They neither constitute expressly warranted characteristics nor guaranteed properties nor a guaranteed durability. They are subject to modification. Our General Terms of Sale apply.