Industry Capability Teams Water & Clean...
Transcript of Industry Capability Teams Water & Clean...
Industry Capability Teams Water & Clean Technologies
Meeting, Sydney 10 December 2012
Agenda 3:00 - WELCOME & INTRODUCTIONS 3:05 - WATER CAPABILITY TEAMS BUSINESS 3:20 – CLEANTECH TEAMS BUSINESS 3:35 - PRESENTATIONS 5:00 - NETWORKING DRINKS 6:30 - CLOSE
Activities this year
o July 2012 – Publication of Capability Directories
o August 2012 – Pitch Training held across the country
o September 2012 – Futurebuild Expo
o October 2012 – Launch of team website
o December 2012 – CSR Clean Tech Showcase
Cleantech Teams delivered in partnership with
Activities this year
o May 2012 – OzWater networking event and Austrade international delegation briefings
o June 2012 – Nubian capability briefing/site visit
o August 2012 – Pitch training held across the country
o November 2012 – SKM Showcase
o December 2012 – Barossa Valley site visit/showcase & Launch of Water Industry Capability Teams Statement
Water Teams delivered in partnership with
Expos Mining Expo, Perth, 20th – 23rd March Manufacturing Week Expo, Melbourne, 7th – 10th May OzWater, Perth, 7th - 9th May Training RISCI – Mining industry readiness workshop, to be held in Sydney and Melbourne 1Q13 IP Strategy training with Griffith Hack in Sydney, Brisbane, Melbourne and Perth – 2Q13
First half 2013 Activities
Teams delivered in partnership with
Customer Showcases Facilities Management Showcase - Melbourne, 27th February National Off-grid Mining Showcases - Adelaide 21st February, Brisbane 14th March AusIndustry Customer Event
–Adelaide 21st February – Food Industry –Adelaide 22nd February – Manufacturing Industry
Food Manufacturers SA Showcase - Adelaide Q2 2013 Design and Engineering Showcases – Q1 2013 Major Customers Showcase – Q1 2013
First half 2013 Activities Teams delivered in partnership with
Working with the Utilities: Effective Engagement and Opportunities Ken Wiggens
Infrastructure Delivery, Sydney Water
PRESENTATION
NSW Major Projects ConferenceNovember 2012
Collaborativecontracting frameworkSydney Water’s Network & Facility Renewals Program
9
Today’s content
Sydney Water and the Network & Facility Renewal program 1
Key features of the collaborative contracting framework 2
Implementation progress3
10
About Sydney Water
State owned corporation
Water and wastewater services
4.6 million customers
Revenue $2.3 billion per annum
42,000 kms of pipes
Over 700 treatment and pumping facilities
11
About Sydney Water
12
Network & Facility Renewals$1.3 billion infrastructure
investment over 5 years
Quality done – renewal focus now– treatment and pumping facilities– water and sewer networks
Servicing infill urban growth
13
Past delivery methodsfour program alliances
plus
design and construct contracts
great improvements in safety
good environmental and community
delivered time, quality – cost?
14
Opportunity for changeValued water solutions
Regulator demands efficiencies
Safety, quality, environment, community
Change in nature of the work
Efficiencies:– risk allocation and commercials– consolidation
15
Key features - organisation
Network Major Works
• large water mains renewal
• new or amplified water assets
• new pumping stations
• large sewer renewal
Network Minor Works
• small sewer and stormwater renewal
• small reticulation water main renewal
Facility Renewals
• mechanical and electrical renewals
• civil renewal of tanks, channels, etc
three workstreams
16
Key features - organisation
Network Major Works
Program Management Office
Network Minor Works
Facility Renewals
OtherInfrastructure
Engineering / Environmental
Services
Proj
ect
Man
agem
ent
Del
iver
y C
ontr
acto
rs
Program, Cost & Risk Management
services provider
Program, Cost
Project Management
services provider(s)
Delivery Contractors panel of service
providers
17
Key Features – commercialSydney Water contracts directlyRange of payment mechanisms:
– target cost– fixed price– reimbursable cost plus fee
Open book - to understand costsPerformance regime:
– key performance indicators– % fee at risk and some gain– league tables
Competition retained
18
Key Features – collaboration
Key result indicators
Collaborative Leadership Group
Collocation– Program Management Office– Project Managers– Sydney water staff and providers
Five year plus arrangements
19
Implementation
Market sounding
Program, Cost & Risk Management services
Project Management services
Facility Renewal Delivery Contractors – two work types
Environmental & Engineering services panel
Network Delivery Contractors – six work types Tender in July for award in November
Tender in Oct for award in April 2013
March 2013 to September 2012
Tender in July for award in Dec
20
Questions?
20
Cleantech Needs for Mining Projects Andrew Johnstone,
Managing Director, NuPower Resources
PRESENTATION
Phosphate�in�Central�AustraliaDecember�2012
NuPower
NuPower Disclaimer
This presentation has been prepared by NuPower Resources Limited (“NuPower” or the “Company”). It should not be consideredas an offer or invitation to subscribe for, or purchase any, securities in the Company or as an inducement to make an offer orinvitation with respect to those securities. No agreement to subscribe for securities in the Company will be entered into on the basisof this presentation.
This presentation contains forecasts, projections and forward looking information. Such forecasts, projections and information arenot a guarantee of future performance and involve unknown risks and uncertainties, many of which are out of NuPower's control.Actual results and developments will almost certainly differ materially from those expressed or implied. Nupower has not audited orinvestigated the accuracy or completeness of the information, statements and opinions contained in this presentation. To themaximum extent permitted by applicable laws, NuPower makes no representation and can give no assurance, guarantee orwarranty, express or implied, as to, and takes no responsibility and assumes no liability for (1) the authenticity, validity, accuracy,suitability or completeness of, or any errors in or omission from, any information, statement or opinion contained in this presentationand (2) without prejudice to the generality of the foregoing, the achievement or accuracy of any forecasts, projections or otherforward looking information contained or referred to in this presentation.
Throughout this presentation all figures are quoted in A$ dollars unless otherwise stated. You should not act in reliance on thispresentation material. This overview of the Company does not purport to be all inclusive or to contain all information which itsrecipients may require in order to make an informed assessment of NuPower's prospects. You should conduct your owninvestigation and perform your own analysis in order to satisfy yourself as to the accuracy and completeness of the information,statements and opinions contained in this presentation before making any investment decision.
NuPower Competent Person’s Statement
The information in this presentation that relates to Exploration Results and Mineral Resources is based on information compiled byMr Andrew Johnstone who is an Officer of the Company. Mr Johnstone is a Member of the Australian Institute of Geoscientists. MrJohnstone has sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration and tothe activity which he is undertaking to qualify as a Competent Person as defined in the 2004 Edition of the ‘Australasian Code forReporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr Johnstone consents to the inclusion in this report of thematters based on the information in the form and context in which it appears.
The information in this report that relates to mineral resource estimation is based on work completed by Mr Jonathon Abbott who isa full-time employee of MPR Geological Consultants Pty Ltd and a member of the Australian Institute of Geoscientists. Mr Abbotthas sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration and to the activitywhich he is undertaking to qualify as a Competent Person as defined in the 2004 Edition of the ‘Australasian Code for Reporting ofExploration Results, Mineral Resources and Ore Reserves’. Mr Abbott consents to the inclusion in the report of the matters based onhis information in the form and context in which it appears.
Overview
What is Phosphate (P205) and why is it so important
Three 100% owned phosphate projects covering 5,720km2
in Northern Territory• Arganara• Lucy Creek• Warrabri
Arganara JORC Compliant Resource announced in August
• 310 million tonnes @ 15% P205 (10% cutoff)
Name change – Central Australian Phosphate Limited
Clean Tech – Applications to NuPower
Phosphate�in�Fertiliser
Advantages of Phosphate Fertiliser
Phosphate is an essential element of life, found in all living cellsIntensive Agriculture is difficult without Phosphate fertilisersPhosphate increases:
YieldsGrowing cycles per yearResistance to disease
Growing populations and urbanisation are driving food demandTropic and Sub Tropic soils are Phosphate deficientPhosphate fertiliser greatly improves protein rich crop production yieldsApplication on pasture for dairy increases yields and milk quality
Food Security is a major global issue
Phosphate
Australia’s Phosphate reserves are found in the Georgina BasinPhosphate Hill - Queensland P205 MineAustralia is an importer of PhosphateIndia – largest Global importerChina, America and Morocco - exportersFertiliser requires Phosphate Rock or Phosphate levels of ~30% P205
Global Direct Ship Ore (DSO +30% P205)resources are depleting, lower grade ore through washing, flotation and calcining is being minedGlobal consumption of Phosphate Rock increasing, growing global food requirementsRock Phosphate price has remained stable during 2012 ~ US$180t
Project�Overview
Favorably locatedclose to the Central Australian Railway
Northern Territory Phosphate projects
Arganara�Phosphate�Project
ArganaraResource
Arganara�Resource
Drilling program of 387 RC holes for 14,480 metres has defined JORC Resource of:
310 million tonnes @ 15% P205
One of Australia’s largest reported Phosphate resources– 2nd largest reported resource in NT
High grade Resource containing numerous drill intersections above 30% PhosphateClose to infrastructure– 90km east of Darwin to Alice Springs Railway– Situated on major outback road
27km�Mineralised�Corridor�– Enormous�Potential
Arganara�EL24726
5km
Arganara�Resource�310mt�at�15%�P205�
27.8km2 Mineralised�Phosphate�Corridor�~92km2
Arganara�Inferred�JORC�Resource,�Arganara�Phase�1,�2�&�3�drilling�results
Inferred�Resource�Estimate
Cutoff
Tonnes
P2O
5
Al2
O3
CaO
Fe2
O3K2O MgO MnO Na2O
SiO
2TiO2 U LOI
P2O5%Million
% % % % % % % % % % ppm %
5 360 14 7.4 19 5.8 1.6 0.80 0.18 0.17 46 0.41 15 3.7
10 310 15 7.3 20 5.8 1.5 0.80 0.18 0.18 45 0.40 15 3.715 120 18 6.6 24 4.9 1.3 0.73 0.16 0.18 39 0.35 15 3.5
20 4 23 5.2 31 5.5 1.1 0.62 0.27 0.17 31 0.28 12 3.2
387 holes 5.8 km EW x 5.4 km NSAverage thickness 7mAverage depth 19mShallow, near surface high grade PhosphateDensity 1.7gcc
Arganara,one of Australia’slargestdefinedPhosphateResources
Targeting�DSO�Grades
Hole East NorthFrom�(m)
To�(m)
Int.�(m)
P2O5�(%)
+ 30% Phosphate��Intersections
ARC180 515596 7622205 14 19 5 29.3 Inc.�2m�@�33.9%�from�17m
ARC090 519996 7623000 12 15 3 28.3 Inc.�2m�@�30.3%�from�12m
ARC196 516189 7621611 23 25 2 27.8
ARC200 516399 7621001 25 31 6 26.7 Inc.�3m�@�32.5%�from�26m
ARC354 516415 7621787 24 30 6 25.8 Inc.�2m�@�32.9%�from�24m
ARC197 516194 7621395 24 29 5 25.7 Inc.�2m�@�30.3%�from�26m
ARC351 516401 7621204 22 25 3 25.3
ARC169 520001 7621995 23 30 7 24.9
ARC086 517995 7620200 20 26 6 24.8 Inc.�2m�@�30.4�from�23m
ARC181 515601 7622004 13 19 6 24.5 Inc.�2m�@�31.9%�from�16m�
15%�cutoff,�includes�up�to�2m�@�10%�internal�dilution2011 Drilling, Arganara Prospect
In fill drilling program will target DSO grade intersections
DSO�+25%�Phosphate�Depth�Distribution
Lucy�Creek�Phosphate�Project
Lucy Creek Project
PatanellaDrilling 2009
Lucy Creek - DSO potential
Warrabri�Phosphate�Project
Warrabri Project
Potential geology - strike length of 80 km x 12km width
NT Geological Survey reported cuttings from a Wycliffe Well drill hole assayed 3m @ 2.2% P205
Phosphate recorded at WarrabriOn Stuart Hwy and Darwin to Adelaide railwaySurface drilling planned Q4 2012 to test
Upcoming�Program
Mining Lease Application
Diamond Drill Program
Metallurgical test work – Phase 2
DSO Drilling
Development strategies
Market assessment (CRU, Ferticon)
Bulk Samples
Transport Studies, Social Impact Studies
Relationships, Partnerships, Marketing, Off-take
agreements
Hypothetical Economics (DSO):
Phosphate loaded Darwin ~ $75 to $85
FOB Sales +30% P2O5 ~ $165 to $185
200Ktpa
NuPower��Phosphate�Development�Options
DSO�Operation Long�Term�Fertilizer�Option
Simple�Mining�– Free�Digging Simple�Mining�– Free�Digging
Crush�and�Screen�– Input�Grade�~�25�to�30%�P2O5 Crush,�Screen,�Floatation – Input�Grade�~�15%�P2O5
Containerized�product�to�Darwin Bulk��movement�of�P2O5 to�Darwin�� Rail
Transport�,�Truck�120km�to�siding�then�Rail�to�Darwin�Port Production�of�Super�phosphate�(low�capex)
FOB�sales�via�Darwin�to:�India,�SE�Asia,�China MAP�or�DAP�production�(med�high�capex)
Aim:�150,000�to�200,000tpa Ammonia�and�Sulfur,�bi�products�from�INPEX (liquefied�gas�plant�being�constructed�in�Darwin)
Low�Capex – Quick�startup Aim:�1,000,000t�to�2,000,000�tpa
Larger�Capex – Longer�development�time
NuPower
The Arganara Resource has excellent size, grades and location
NuPower has defined a 27km corridor of phosphate
mineralisation which could host a significantly larger resource.
Pipeline of phosphate projects
Available infrastructure ,
rail to both Darwin and
southern states of Australia
Darwin – INPEX
Darwin Port
Gateway to Asia and India
Name�Change,��Cleantech
At our recent AGM, shareholders voted to change NuPower's name to:
Central Australian Phosphate Limited
New identity reflective of the Company’s key commodity and geographic focus
CLEANTECH, applications must make economic sense
Exploration, Development, PermittingTime Savings, Multiple use, New technologiesProcessing – DSO vs Flotation (low grade material)WaterWasteEnergyMining techniques, new technologiesTransport and Logistics – Biggest CostINPEX Value Add. Fertiliser Plant Darwin
Corporate�Overview
NuPower
ASX: NUP
Market Cap $7.6 million(share price 1.5c)
Shares on Issue:
511.8 million
Unlisted options
5 million(exp: 6/2013 @ 3.5c)
Cash at hand:
$1.2 million
Robert Owen Chairman
Andrew Johnstone Managing DirectorSam Herszberg Non-executive Director
Ian Kowalick Non-executive DirectorMick Muir Non-executive DirectorAnthony Schildkraut Company Sec. CFO
Current:�0.150�cents
NuPower - A Northern Territory Phosphate Company
How to Access Utility and Industrial Clients by Working with Prime Contractors
John Le Couteur Director, Hansard Consulting
PRESENTATION
Cleantech Industry Capability Teams Sydney Team Meeting & Networking Event Monday 10 December 2012
‘How to Access Utility and Industrial Clients by working with Prime Contractors’
John Le Couteur Hansard Consulting Pty Ltd [email protected] Revision: 10.12.12_Final V2
23
Content
• Role of the Prime Contractor
• Example – New Technology & Local Water Authority
• Commercial Model Options
• Prime Contractor’s Drivers
• Information to be provided to Contractor
• Lesson’s Learnt
Cleantech Industry Capability Teams - Sydney Team Meeting & Networking Event Monday 10 December 2012 24
What does a Prime Contractor offer?
• Norm in the water industry is the ‘D&C’ or ‘Alliance’ type method of project delivery.
• Under ‘D&C’ model, contractor typically delivers a ‘new asset’ or ‘piece of infrastructure’ for a fixed price, to a certain specification, by a certain date with penalties for non-performance.
• Ability to take a concept and turn it into a workable solution.
• Takes on the majority of delivery and performance risk.
• One point of contact for Client.
• Balance Sheet / Securities / Guarantees.
• Different risk profile than an EPCM Contractor.
Cleantech Industry Capability Teams - Sydney Team Meeting & Networking Event Monday 10 December 2012 25
Lets look at an example
• Client (say a local government owned water authority) requires a Prime Contractor to design, build and commission a new Wastewater Treatment Plant (‘WWTP’), to the Client’s specification.
• You hold the Australian distribution rights to a novel phosphate recovery technology.
• You have approached Client on previous occasions without much success.
• Client has advised it is due to release a D&C tender in a couple of months for a new WWTP. Suggests to you that you best liaise with the list of Tenderers that have been selected to participate in the RFT process.
Cleantech Industry Capability Teams - Sydney Team Meeting & Networking Event Monday 10 December 2012 26
Two typical commercial models
• Supplier / Subcontractor
– Many suppliers and subcontractors.
– Suppliers can be either be (i) included in client’s preferred supplier list, (ii) open, or (iii) nominated.
– Either Client’s specification is purely performance based, or is written around a particular process.
• Split Scope Joint Venture
– Technology component is high in terms of overall $ value of contract.
– Each party responsible for their own scope of works and performance.
– Technology partner usually offers performance guarantee.
• Many derivations of the above models
27
Prime Contractor’s drivers
• Not many contracts are awarded based on fully conforming offers.
• What can I offer as a Value for Money (‘VFM’) alternative, whilst still meeting objectives? Want to offer client alternative(s) to set myself apart from other tenderers.
• Tender bids submitted are often > than Client’s budget. Options? – Cut Scope – Consider Alternative offers – Remember clock is ticking for client to award……………..
• Minimal cost outlay during tender period.
• Time & Resources.
• Provide relevant information early and then stagger deliverables, according to tender program.
• Have a well thought out draft commercial proposal early on.
Cleantech Industry Capability Teams - Sydney Team Meeting & Networking Event Monday 10 December 2012 28
What sort of Technical information do I need to provide?
• Division of Work (‘DOW’) / Responsibility Matrix
• Dwgs - CAD format preferred
• Is there any Balance of Design (‘BOP’) required?
• Packing List (How is it going to be shipped and assembled)
• Bill of Materials (Reduces time to do / verify quantity take offs)
• Benchmark installation from past experience (Man-hours important, not costs)
• Any specialised Plant & Equipment required to install / commission?
• Commissioning Costs (first fill chemicals, labour, spares) – clearly itemise.
Cleantech Industry Capability Teams - Sydney Team Meeting & Networking Event Monday 10 December 2012 29
Tips on the Commercial information to be provided
• Description of Alternative Offer – Pictures are good. Be concise - detail in Appendix – Helps to be written from the Contractor’s perspective – Past Experience / Referees / Operating history
• Performance Guarantees
– Very Important
– What is the Client’s fall-back position (How are they exposed if your technology fails or has a major outage?)
– What level of redundancy is proposed?
– Is a Performance Bond being offered by you, or your parent company?
• CAPEX – Provide Breakup of Costs (check against DOW)
Cleantech Industry Capability Teams - Sydney Team Meeting & Networking Event Monday 10 December 2012 30
Lessons Learnt
• Not Enough Time – Tender period short – Client’s evaluation period (may have an external driver, i.e. EPA
Licence)
• Communication – Too much generic information provided. – Tell the story appropriate for this Client and this site. Short & Sharp!
• What the Client should already know about you?
– Past Experience / Referees / Operating history
– Site Visits (Both an operating site & new site of WWTP)
Cleantech Industry Capability Teams - Sydney Team Meeting & Networking Event Monday 10 December 2012 31
Lessons Learnt (Continued)
• ‘Clarity of alternative solution offered’
– Nothing attractive offered, compared to traditional process.
– Concentrate not so much about what the technology does, but clearly spells out how it adds value.
• What you should already know prior to tender being released?
– Basis of the Client’s concept design for the new WWTP (usually undertaken by consultant engaged by client).
– Client’s approach to risk and new technologies – How would use of this technology impact on licences & compliance? – Community / Environmental issues. Is this a sensitive site? – Design basis of Alternative Offer you are proposing (redundancy,
interfaces, BOP considerations) Cleantech Industry Capability Teams - Sydney Team Meeting & Networking Event Monday 10 December 2012 32
Lesson Learnt (Continued)
• Client Expectations
– Don’t assume the Client has resources to devote to the evaluation of alternative offers. Make it easy!
• Operating & Maintenance
– Very Important
– Value Proposition (NPV may be best way of illustrating value)
– Can you offer the Client any guarantees or extended warranties? (Bearing in mind you will have no contractual relationship with the Prime Contractor post Defects Liability Period under a D&C Contract)
Cleantech Industry Capability Teams - Sydney Team Meeting & Networking Event Monday 10 December 2012 33
In Conclusion • Awareness of Time
– One of the important considerations during tender period
– Ability for all parties to commit to and meet milestones during tender period is crucial.
• Planning – Actively involve yourself in (i) developing a program of deliverables, and (ii) decision making steps with the Contractor.
• Pre-Bids / Joint Venture Agreements – Get them agreed ASAP or at least to a draft prior to tender submission.
• Expectations – Understand them (both Client & Contractor’s). They are not always what you think they will be.
• Contingencies – Plan for them, they will always occur.
• Communication – Apart from the obvious, builds confidence and trust.
Cleantech Industry Capability Teams - Sydney Team Meeting & Networking Event Monday 10 December 2012 34
Working with Large Energy Companies: Pitfalls and Opportunities
Peter Heanke previously Manager of Emerging Technologies
Origin Energy
PRESENTATION
Working with Large Energy Companies:Pitfalls and OpportunitiesPeter Haenke
10th December 2012Cleantech Industry Capability Teams Meeting
36
5 steps to successful engagement
1. Distil your Value Proposition: make it easy, define it for each player
in the proposed value chain
2. Research all channels - decide on your strategic approach: your
dealing with an Energy Co can then be done in context of your
broader plan
3. Research Energy Co and the most appropriate engagement
approach
4. Engage & Refine your value proposition
5. Make it easy
37
3. ResearchUnderstand the Energy Co and identify your target
38
Australia’s (East Coast) Electricity & Gas Markets
• Wholesale and retail supply are (largely)
competitive marketso Private and government ownership
• Networks are natural monopolies and regulatedo Private and government ownershipo Prohibited from owning “upstream” or
“downstream” operations
• 3 major retailers – all vertically integrated (excluding networks)o AGLo EnergyAustralia (TRUenergy) o Origin
• About 20 active minor retailerso Private and government owned
AER 2011, State of the Energy Market, 2011
39
While retail is often the public face of Energy Co’s...
Source: Origin presentation to the UBS Utilities Conference, June 2012
40
…the full extent of operations may be significantly greater
Source: Origin presentation to the UBS Utilities Conference, June 2012
41
Energy is in the news
Origin warns of higher power prices The Australian, Nov 12, 2012
Complaints spike as energy prices soar Ninemsn, Nov 20, 2012
42
Some key electricity industry drivers• Falling consumption and
demand: reduced demand + increased renewables
• Network costs – rising strongly• Environmental costs – rising• Total delivered costs – rising• Regulatory uncertainty:
Renewable policies – RET review, solar multiplier
• Thermal coal trending to export price linkage
• NSW asset sale
AER 2011, State of the Energy Market, 2011
AEMO 2012, Electricity Statement of Opportunities for the National Electricity Market
43
Trends in the electricity market
44
Some key gas industry drivers• Transition to an export-led
market– Tripling east coast demand– Export linked domestic
pricing
• Massive capital & resource requirements to build LNG capacity– On-time, on-budget delivery is
crucial to share price performance
• CSG water & land access issues• CSG fugitive emissions
45
So, before engaging an Energy Co, some initial screening questions are:
• What does the company do
o Extent of vertical integration, products, retail incumbency
o Market share and geographical coverage
• What part of the business are you targeting?
• Where does that fit in the overall organisation?
• What are the key industry drivers
• How will your offer affect these – positively or negatively?
46
4. Engage & RefineFocus your value proposition
47
Why engage with an Energy Co?
• Capital
o Access funding / investment: Sale of company (whole or part) to
EnergyCo
• Channel partner
o Access customer relationship
o Access billing relationship
• Access wholesale commodity (electricity or gas) provider
• Direct sale of product or service to Energy Co
48
Where to engage? Origin as an example.
Origin
Upstream Oil & Gas Energy Markets
Retail
Mass Market and C&I
Wholesale & Trading
Energy & EnviroMarkets, Major
Customers
Energy Risk Management
Internal Customers
Generation
Development Corporate
StrategyM&A
49
Key considerations – for a retail offering
• Brand & Reputation
• Geographic coverage
• Attractive value proposition
• Professional delivery capability
• Legal constraints
• Regulatory constraints and drivers
• Public & political scrutiny
50
Key considerations – for a wholesale offering
• Scale
• Counterparty risk
• Volume risk
• Market risk
• Dispatchability / “firmness”
51
Key considerations – for an investment offering
• Strategic alignment
• Access unique resource or key technology
• Scale-ability
• Capital requirements
• Reputation
• Option play – potential disruptive technology
52
Know your terminology
• kW does not equal kWh
• kW/h is meaningless
• mW are very different to MW
• Energy vs Capacity
• Understand PPA, Capacity Factor, dispatchability/firmness,
• LCOE (Levelised Cost of Electricity)
• “Upstream” & “Downstream” mean different things to different parts of
the business
• Oil & Gas: mtpa; PJe; 2P, 3P, “Conventional” & “Unconventional”; CSG,
CSM, CBM
53
5. Make it easy(for Energy Co)
54
Structure to minimise risk
• Ensure clarification of expectations (no surprises for any of the
Energy Co departments or hierarchies)
• Customer interface management vital (note Retailer's brand risk)
• Ensure robust delivery processes
• Give confidence in your ability to manage cash flow
• Give confidence in terms of your regulatory competences
• Staged approach: minimise risk to Energy Co (time and money)
• Understand delegated authorities and governance requirements
• Energy Co T&Cs
55
QUESTIONS?
Peter Haenke
Energy. Carbon. Sustainability.
0409 657 198
56
Working with the Coal Seam Gas Sector: Needs and Requirements
Hamish Gordon National Sector Manager –Water,
Industry Capability Network
PRESENTATION
Working with the Coal Seam Gas Sector Needs and
Requirements
Needs • Water transfer: Pumps; pipes; valves
– Water transfer from bore sites to water treatment facilities – Energy efficiency recovery & reuse – (Arrow 1000 + bores currently expansion to 5000 + in approx 3-5
years)
• Water treatment: Reverse Osmosis & Microfiltration etc. – 100meg total treatment facilities (Arrow) – Waste treatment (Brine) mineral recovery – Energy recovery and re-use
• Water Re-use: Irrigation; alternate re-use within mining process – Processed water use within irrigation and stock watering; integrated
monitoring and control – Onsite water re-use ; dust suppression
• Water: Sensory and control IT solutions – Sensing & control equipment and maintenance – Energy recovery, decision / management
• Water environmental: Pre and post monitoring – Environmental assessment – Continuous monitoring – Post water management and concealment
CSG Requirements • Safety and Environment
– Supplier has proven track record and commitment to operating safely and adhering to environmental regulations and requirements
• Capable
– Suppliers able to demonstrate they can meet designated scope of works and deliver a high quality outcome, on time and budget
• Local Content
– Is evident and supported throughout the supply chain
• Competitive pricing – The supplier is able to demonstrate that they are globally competitive
and have a robust cost management process
• Customer focus – The supplier is focused on delivering the best possible outcome for the
customer and is willing to work to meet the customers’ deadlines, commitments, policies and terms.
• Innovation
– The supplier is looking to continuously improve their business and look at ways that they can provide new innovation to the customer
• Commitment to compliance – The supplier acts within the relevant act in all occasions
Business requirements • Capability Statement
– This needs to be detailed and targeted towards proponent – Arrow Energy capability statement template
http://www.icnqld.org.au/media/documents/Business-Profile-Template.pdf
• Tier Barometer Assessment
– Based on research and responses to a survey from over 100 organisations covering a mix of major project proponents, http://www.icnqld.org.au/services/tier_barometer_assessment.html
– There is also a Tier Barometer available for the Australia Pacific LNG
project and it can be accessed by visiting www.aplng.icn.org.au and clicking on "Assess Your Tier Level".
Time and Cost Commitments • Staff training and development
– Staff involved in project will be required to undertake specific training; this could be anything from a couple of days to a week.
– Need to take this cost into account when tendering.
• Vehicles, machinery and equipment specific requirements – Improved safety devices such as vehicle tracking, ROPS (Roll Over
Protection System) etc. – These costs will need to be met by supplier
• Local supplier base
– Procurement will be conducted locally (first instance) then state - finally Australia wide
– Considered a local operation? Think again • Standards
– In all cases Australian standards will be adopted, unless an overseas product exceeds those standards
Contract Requirements
• Fewer contracts more solutions provision orientated
– Contracts assigned to Tier 1 to oversee a particular project – Tier 1 will be responsible for managing subsequent Tier contracts
• Pre – qualification and registration process
– ICN Gateway – Undertaken by proponent or 3rd party – Information needs to be as detailed as possible
Project Timeline
Details
Hamish Gordon ICN National Sector Manager – Water [email protected] 08 8303 2587 Project Information and registration http://water.icn.org.au/
Thank you Any Questions ?
Panel Session • Ken Wiggens, Infrastructure Delivery, Sydney
Water • Andrew Johnstone, Managing Director, NuPower
Resources • John Le Couteur, Director, Hansard Consulting • Peter Heanke, previously Manager of Emerging
Technologies at Origin Energy • Hamish Gordon, National Sector Manager –
Water, Industry Capability Network