Industry Capability StatementA guide to assist engagement with INNOVIS

We are the leader in effective, agile, outcomes-oriented design

and construction engineering.

Centred around relationships, value and optimisation, our team

understands and achieves our client’s objectives.

“ “

Vision.Calibration.

Optimisation.

High Performance Consultancyemploying anagile, outcomes oriented, client focused,collaborative approach to fruition of vision.

INNOVIS undertakes both traditional delivery and boasts specialist capabilities, applicable across multiple sectors and at any

phase of a project lifecycle, that ensure its client’s benefit from industry leading design and project management capabilities.

We exploit technology as an enabler and seek to optimise all outcomes.

Experienced in large and smaller projects, INNOVIS understands the nuances and expectations of its different clients within each

format and has the ability to effectively apply the dying arts of value engineering, optimisation, design and risk mitigation

through effective early due diligence, return briefing and consistent client consultation.

The intent of this document is to inform the reader of INNOVIS’ capability and provide a foundation promoting further

conversation.

Prepare to become acquainted with Innovis in three ways:

1. What INNOVIS is capable of undertaking,

2. What INNOVIS has undertaken, and

3. How we can help you.

You will feel confident that INNOVIS is capable of fulfilling the crucial role of achieving successful outcomes at every phase of a

project lifecycle by diligently contributing to better value, more efficient and safer outcomes for all our clients.

ExecutiveSummary

How WeAdd ValueCalibration

To Calibrate we must understand the vision and related stakeholders. People create, and to be successful in that pursuit they must effectively communicate. The role of a consultant should – in its purest form – be to translate client vision into project scope, universally understood by all required disciplines so that their delivery is driven by high-performance expectations and criteria.

Optimisation

To Optimise we must design, procure and construct with the calibrated understanding of client vision. This may include research and development, additional specialist consultant involvement or other processes to ensure a granular rather than superficial approach to problem solving and delivery.

Calibration and Optimisation are ongoing processes not destinations. They are mindsets and

high-performance practises that positively influence time, cost and quality for all parties.

“ “

EngagementProcess

WhyINNOVIS

Sustainable growth, maintaining agility and an outcomes driven approach sees continuity of project team members throughout the project lifecycle, ensuring clients receive what is promised.

Research and development ensures the latest technologies are explored, tested and implemented. Knowing when to adopt traditional solutions or alternatives comes with experience found at INNOVIS.

Partnership allows INNOVIS to scale instantaneously, offering a full-service design team where needed, leveraging the skillsets of like-minded consultants. A process that reduces risk and increases quality. We can lead or be lead.

Borders have no meaning in a connected society. Flexible working platforms and the evolution of connectivity ensures INNOVIS can service their clients in any location with the quality expected of tier one delivery.

Sectors & Capabilities

Temporary works design

• Holistic design review to optimise temporary and permanent structure to minimise and/or eliminate physical temporary works /props .

• Staged erection analysis, including use of leading Finite Element Analysis for specialised analysis procedures.

• Detailed construction sequencing, including Methodology Engineering services.

• Hoardings & gantry design.• Scaffolding – design, inspection and certification.• Structural capacity assessment of existing and new structures.• Formwork / false work– design, inspection and certification of formwork and

stripping.• Propping, lifting and support of precast and steel structures, including back

propping.• Staged Construction Analysis.• Retaining Systems – temporary and permanent.• Crane and hoist foundations, supports and tie structures.• Crane study.• Temporary structures – site compounds, fences, sign boards, wheel washes,

barriers, bridges, culverts etc.• Transport and lift analysis.

Permanent structure design

• Feasibility study / development due diligence and advice.• Preliminary and concept design.• Full structural design services – concept through to construction and for all

scales of projects, private and public.

General Capabilities

• Feasibility study / development due diligence and advice.• Concept and scheme review.• Condition inspections and assessment inc. intrusive, forensic, capacity and

change of use.• Project and design management.• Design and construct delivery.• General independent professional advice.• Construction sequence and programme review.• Value management.• Peer review / proof engineering.• Research and development.• Maintenance review and contracts.• Third party independent certification.• Waterproofing.• Heritage expert.• Small commissions including load and penetration assessments.• Service restraints.

Commercial ConstructionResidential Construction

DefenceIndustrial + Warehousing

Transport + InfrastructureMining + Resources

Civil Infrastructure

Options Study

Review Design

Assess Risks

Temporary Works Existing Conditions

Coordination with Stakeholder team

Coordination with ALE and Sarens

Finalise Design

Assess Opportunities

Construction simplicity

Material & Quantity

Efficiencies

Our roots in contractor-centric engagements ensures

INNOVIS understands the delivery model for

optimising outcomes and are committed to:

• Clarity of advice – our advice is clear, and direct. We speak your

language, not just “Engineer”.

• Team Approach – INNOVIS works together with our clients as if we

are a direct part of their team. Our interests are your interest.

• Adequacy of advice – INNOVIS prides itself on providing a senior

team with depth of experience across all areas of Structural and Civil

design. Your project gets what it needs, when its most important.

• Proactive communication – knowing when is as important as knowing

what. Our team are with you when it matters, every step of the way,

ensuring all stakeholders are engaged efficiently and effectively.

The process map below, outlines our proven methodology

for effective design outcomes.

Methodology

Above and beyond traditional structural and civil design consultancy, INNOVIS boasts a range of

specialist capabilities as follows

Value Engineering

Risk Management / Mitigation

Project Management

Design Management

Temporary Works Engineering

Heritage

Waterproofing

Technical Specialties

Discipline and rigour is part of our DNAThe discipline and rigour required for success in all sectors, but namely

the Defence sector is a realised return on investment when working with

INNOVIS, regardless of the project, sector or project value.

Our senior Engineers have significant national and

international Tier 1 design experience

Permanent Works Specific Capability

Innovis excels and specialises in

Constructability focussed approach to realising client and architectural vision, whilst optimising structural efficiency and value.

Creative solutions and risk mitigation through considered approaches to all designs and conditions.

Efficient structural solutions for all material types.

Project Management.

Design Management.

Effective client management focussed on your objectives.

Modularisation and prefabrication.

Advanced use of technology as an enabler.

Peer review and Value Management.

Temporary Works Specific Capability

Innovis excels and specialises in

Erection engineering (construction methodology, staged erection stress analysis and modularisation).

Access solutions (scaffold, swing stages, fall restraint systems and hoist setup).

Precast design (propping, erection methodologies and specialised systems).

Crane design and lifting equipment design (tower and mobile, crane setup and site planning, base and tie design).

Site establishment and demobilisation, temporary gantries, hoarding designs etc.

General construction propping, load assessments……… and more.

Complex problem solving and risk mitigation through considered approaches to all designs and site conditions.

Innovis personnel’s collective experience makes them a primary candidate for projects of any complexity, within any

sector and at any stage of the project lifecycle.

Specialised temporary structures support and knowledge of fabrication and erection processes, ensures permanent works

designs are optimised for constructability and material efficiency from the outset, alleviating unnecessary additional costs

at later stages.

Innovis has had an extensive impact on a number of major South Australian and National projects, namely:

WEST – Commercial & General – Permanent works structural design.

Calvary Hospital– John Holland Group - Temporary Works - Value Engineering, re-design of floor systems.

Rhodes Central Heliostat – Bilbergia – Design and Construct Engineering – Heliostat mirror array support structure

Quay Quarter Tower – Samaras Group - Erection Engineers, Value Management and Construction Efficiency.

Australian Catholic University – WATPAC – Erection Engineering.

Boral Cement grinding facility – Christian Pfeiffer – Certification.

Star Sovereign Resort – Samaras Group - Value Engineering, Erection Engineers.

Osborne South Naval Shipyards Precinct – ANI, McMahons, Cladding and Roofing - Erection Engineers.

SkyCity Casino – Hansen Yuncken - Value Engineering, Redesign of floor systems.

Heavy Lift assessments – Multiple clients.

The following pages offer excerpts of key high-performance engineering examples from Innovis’ archive.

INNOVIS Experience

Innovis provided:

1. Full Structural & Civil design services

2. Innovative Steel and Precast solution for Apartment building

3. Post Tensioned concrete solution for Library building

WEST DevelopmentCommercial & General

Innovis provided:

1. Erection Sequence Analysis & Modular lift

design.

2. Heavy lift and erection services.

3. Stillage, frames and erection support.

4. 4D Sequence modelling and Safe Work Method

statements for steel erection.

Quay Quarter Tower (Sydney)Samaras, Multiplex

Innovis provided:

1. Full Design Service for the Heliostat structure.

2. Erection Engineering.

3. Value Management.

Rhodes Central HeliostatSamaras Group & Bilbergia

Innovis provided:

1. Design services for erection of Major Transfer truss

erection (30T lifts) over the top of an existing

Heritage Building.

2. Temporary Erection platform design over 7 storey

basement with capacity for Tower Crane, 50T

Excavators, Trucks, 300T Mobile Crane, integrated

into Permanent Works.

Australian Catholic UniversityWATPAC

Innovis provided:

1. Erection Sequence Analysis & Modular lift design

eliminating majority of propping requirements.

2. Heavy lift and erection services, lift devices

design.

3. Stillage, frames and erection support.

Osborne Naval Shipyards (South) Samaras, Lend Lease, McMahon, Kone & ANI

Innovis provided:

1. Erection Sequence Analysis & lift design.

2. Stillage, frames and erection support.

3. Temporary bridge design for cranage.

Western Sydney Performing Arts Centre (Rooty Hill, Sydney)Samaras

The Team& Key ResourcesJarvis AndersonTechnical Director

With strong technical design and constructability expertise, Jarvis has international experience in the design and management of commercial, institutional, residential, transport and industrial projects gained from over 14 years in the industry. A strong aptitude for process and systems enables Jarvis to manage both large teams and complex delivery strategies. Highly proficient in precast, concrete and steel structures, with extensive steel design and fabrication industry knowledge, Jarvis leverages a deep understanding of the impacts that constructability and detailing have on achieving complete, economic and buildable solutions.

Benefiting from extensive multidisciplinary exposure, Jarvis can communicate more effectively with other consultants, achieving outcomes that push design boundaries. Key to individual and company success is Jarvis’ philosophy promoting thorough investigation of all options; to test, try and conceptualise alternate technologies or methodologies as a means of adding value to the design and construction processes. Key Qualifications

B. Eng (Civil & Structural) Hons. MIEAust CPEng

Expertise

Delivery Experience

• Commercial Structures• Residential Structures• Industrial Structures• Institutional• Transport Structures• Temporary Works• Defence• Heritage

Key Skill Sets

• Structural Engineering expertise• Value Management• Structural efficiency • Detailing for constructability • Detailing for fabrication

optimisation• Management of teams• Multidisciplinary Coordination• Understanding of Client and

project requirements• Project & Design Management

Maintaining strong relationships with industry subject matter experts ensures we can build teams to deliver services of the

highest standard and in compliance with our mission.“ “

The Team& Key ResourcesFerdous ChowdhuryPrincipal Structural Engineer - Sydney

Ferdous is a Principal Structural Engineer with over 15 years’ of design consultancy experience in Australia across a wide variety of buildings projects within the commercial, residential, industrial, semi-industrial, integrated resort/mixed use developments, aviation sectors. This is also complemented by his extensive experience in the resources industry across marine ports and mine infrastructure projects.

Ferdous takes keen interest on taking leadership in full design life cycle which entails value engineering, optioneering, design development, management and handover. He takes hands-on approach when it comes to technical delivery aspects of design projects; ranging from structural analysis, design and documentation using a range of materials and state-of-the art digital toolkits. He is also experienced in business development and start-up operations. In addition to being a Chartered Engineer in Australia and Registered Engineer in the state of Queensland, he has vast experience in working in award winning and landmark projects across Australia and around the globe. Key Qualifications

B. Eng (Civil) Hons. MBA MIEAust CPEng NER RPEQ

Expertise

Delivery Experience

• Commercial Structures• Residential Structures• Industrial Structures• Institutional Structures• Transport Structures• Temporary Works• Mine Infrastructure• Marine Infrastructure• Aviation

Key Skill Sets

• Structural Engineering expertise• Value Management• Structural efficiency • Detailing for constructability • Constructability review &

fabrication• Management of teams• Multidisciplinary Team

Management & Coordination• Understanding of Client and

project requirements• Project & Design Management

Effective Project and Design Management ensures client objectives are achieved by collaborating effectively with all

stakeholders from inception to close-out of a project.“ “

The Team& Key ResourcesLouise PetersSenior Structural Engineer

Louise has over 15 years of experience in the structural design and management of commercial, institutional and residential projects, bringing creative problem solving to engineering challenges in a collaborative team environment. With a stakeholder focus, Louise coordinates wider teams to ensure interorganisational operations are smooth and efficient, ensuring the best outcomes for clients. In addition to structural engineering design, Louise also enjoys and is experienced in managing and working within multi discipline design teams to deliver full project engineering services on complex building projects.

Louise’s technical capabilities are strong with a special emphasis on detailing and completeness of documentation, ensuring outcomes and quality in design which return benefits throughout the project lifecycle.

Key Qualifications

B. Eng (Civil & Water) Hons.

Expertise

Delivery Experience

• Commercial Structures• Residential Structures• Industrial Structures• Transport Structures• Temporary Works

Key Skill Sets

• Client engagement and briefing• Multidisciplinary coordination• Structural Engineering expertise• Detailing for constructability • Detailing for fabrication

optimisation• Multidisciplinary Coordination

We ensure best practise methodologies are employed through constant professional development, industry

briefings and research and development; key to our ability to identify innovative solutions to achieve client objectives that

are value and outcomes driven.

“ “

The Team& Key ResourcesMark RiddickSenior Structural Engineer

Mark has 18 years of international experience in all forms of major construction, mostly seeing him involved with design and documentation of commercial, institutional, residential and industrial projects.

With a significant background in multidisciplinary projects of varying sizes, Mark is able to conceptualise projects in a holistic manner.

Drawing from his experience and technical knowledge, Mark is able to optimise design and facilitate efficiency in structures.

Seeking value based opportunities is core to a best-for-project approach. Focused on objectives, with a mindset of finding opportunities to deliver optimised outcomes is the

Innovis approach.“ “Key Qualifications

B.Sc (Eng) in Civil EngineeringMIEAust

Expertise

Delivery Experience

• Commercial Structures• Residential Structures• Industrial Structures• Transport Structures• Temporary Works

Key Skill Sets

• Structural Engineering expertise• Value Management• Structural efficiency • Detailing for constructability • Management of teams• Multidisciplinary Coordination• Understanding of Client and

project requirements

The Team& Key ResourcesKevin NortonSenior Structural Engineer

Kevin has over 30 years of experience in structural engineering design and project management across commercial, municipal, education, and industrial sectors in both Australia and the United States. His technical expertise includes the design, evaluation, and assessment of steel, reinforced concrete, and timber structures in Australia and the United States. Having worked for both design consultancies and building contractors, Kevin knows how the design information needs to flow within the design team and to outside parties to promote economical and efficient design.

Kevin also has a strong interest in design process management and focuses on ensuring the team delivers efficient designs efficiently. He has developed numerous, customised job management and design tools to streamline and standardise various design and project management processes. Kevin has taken an active role in the QMS/QA process and is focused on providing quality design and documentation.

He has been an active member of Institute of Engineers, Australia since relocating from the USA to Australia in 2011.

Communication, stakeholder management and effective project team coordination, are key factors in ensuring

successful project delivery.“ “Key Qualifications

M.Sc, Arch Eng (Con Eng & Man)B.Sc Civil Eng (Struct) with distinctionMIEAust, CPEng

Expertise

Delivery Experience

• Commercial Structures• Residential Structures• Industrial Structures• Transport Structures• Temporary Works

Key Skill Sets

• Structural Engineering expertise• Communications & client relations• Structural efficiency• Detailing for constructability &

fabrication• Multidisciplinary team

management & coordination• Project & Design management• Understanding of Client and

project requirements

The Team& Key ResourcesEoghan O’ReillySenior Structural Engineer

With 12 years of experience as a consulting engineer Eoghan has worked on the design of timber, steel and concrete structures and minor civil works in the residential, commercial, utilities and resource sectors.

Eoghan’s focus is on delivering safe, constructible and economical solutions to suit the time and budget constraints of any client.

Working in both small and medium size teams, Eoghan has continuously been exposed to an agile, outcomes oriented workflow requiring fast turn around times whilst maintaining quality, no matter the project size.

Key Qualifications

B. Eng (Structural) HonsMIEAust

Expertise

Delivery Experience

• Commercial Structures• Residential Structures• Institutional• Temporary Works

Key Skill Sets

• Structural Engineering expertise• Value Management• Structural efficiency • Detailing for constructability • Management of teams• Multidisciplinary Coordination• Client engagement and briefing

The attention to detail and agile, outcomes oriented approach adopted by our team ensures successful

satisfaction of client objectives.“ “

The Team& Key ResourcesWaseem KhanSenior Structural Engineer

Waseem has over 8 years of experience in the structural design of commercial, and industrial projects. Bringing detailed analysis and solutions to engineering challenges, Waseem will ensure implementation of the design is accurate, correct and value driven.

With an analytical focus and expertise, Waseem brings a systematic approach to technical due diligence that ensures best practises are employed and client objectives are achieved. Waseem focuses on communication and integration within the wider project team to ensure that areas of multidisciplinary coordination are managed with appropriate strategies before they impact the design process, bringing value to our clients by ensuring outcomes that are best for the project and established as early in the lifecycle as possible.

Key Qualifications

B. Eng (Civil & Water) Hons.

Expertise

Delivery Experience

• Commercial Structures• Residential Structures• Industrial Structures• Transport Structures• Temporary Works

Key Skill Sets

• Client engagement and briefing• Multidisciplinary coordination• Structural Engineering expertise• Detailing for constructability • Detailing for fabrication

optimisation• Multidisciplinary Coordination

We pride ourselves on being subject matter experts within our respective field, always seeking to deliver value driven,

optimal outcomes based on the objectives of all stakeholders.

“ “

Testimonials

‘As a client, the immersive and fully collaborative approach provided by Innovis is refreshing in a time where consultancy has moved towards purely transactional relationships. Innovis is a preferred partner for our engineering activities’

Ian Tan – Walker Corporation

“Innovis operates wherever we do. Having the agility to follow our project workflow nationally, employing industry leading techniques, technologies and research and development efforts make this team the go-to for all our engineering requirements.

Chris Samaras- Managing Director – Samaras Structural Engineers

1300 466 043

info@innovis.com.au

Suite 3.B Level 333 King William StreetAdelaide SA 5000

We’re Here To Help

Speaking to an INNOVIS team member to communicate your objectives allows a

process of discovery to take place ensuring necessary key information is obtained,

facilitating the most effective solution for every project.