Industrial Coatings For Your Building And Construction

7/31/2019 Industrial Coatings For Your Building And Construction

1/101

http://diamondpcs.com.au/


2/102

TABLE OF CONTENTS

Selecting The Right Protective Coatings For Your

Investments

3

Insulate Your Home Better With The Right IndustrialCoatings

4

The Value of Corrosion Protection

5

How To Choose Painting Contractors For Your Painting

Needs

6

Causes Of Concrete Damage And Concrete Repair

Methods To Address Them

7


3/103

Selecting The Right Protective Coatings For Your Investments

In industrial settings, business owners need to make plenty

of investments. The workers they hire, the facilities they

purchase and set up for their operations, and the

machinery and equipment to be used in processing and

transporting their intended products are all considered

investments and must therefore be selected with care.

Low quality equipment, barely qualified employees, or

facilities that pose work disruptions or safety hazards can

be costly to address or replace, resulting in significant

business losses instead of profits and credibility within the

industry.

For businesses with factories or general processing and

distributing facilities in coastal areas, efforts to maintain

the good quality of the machinery, equipment, and structures used must be doubled. The

exposure of metal components and structures to water and oxygen, along with salt sprays from

the ocean, can lead to the chemical reaction known as corrosion. Left exposed to the elements

and unchecked for damage, all equipmentregardless whether they are top quality andexpensive pieces or more commonly available onescan develop rust and continuous

deterioration. It wouldn't be wise to let an investment go to waste; business owners must

ensure that protective coatings are applied to equipment and structures to maintain their good

quality for longer periods of time.

If a metal component is already showing signs of rust, protective coating service providers can

perform abrasive techniques on it to in order to remove rust, mill scales, foreign particles, and

other layers that may have accumulated on the surface. A variety of abrasive materials can be

used, depending on the damage to be addressed and the desired restoration effect; there are

metallic abrasives like stainless steel shot, cut wire, or steel grit, while non-metallic materials

include inexpensive silica sand, walnut shells, and garnet. Forceful applications of these

materials can clean, smoothen, or roughen a particular surface.

Structures that are built to store or process liquids constantly are also prone to corrosion. Tanks

are often used to store potable water, fossil fuels, or chemicals. Chemical liquids themselves

can damage the storage tanks over time; water, on the other hand, must be free from exposure

to harmful toxins and aquatic microorganisms if it's meant to be consumed by people. The

necessity of protective coatings for storage vessels must then be stressed. Polyester, epoxy, and


4/104

polyurethane are considered some of the most effective resins for lining liquid tanks. Resins

reinforced with glass fibres are also good choices for corrosion protection materials that can

ensure safety for years.

If your business involves milling operations, manufacturing, transport and logistics, or food and

water processing, protecting your equipment and structures from deterioration must be a high

priority. Protective coatings can help your investment in facilities and machinery last longer and

keep your operations safer and more efficient over the long haul.

Insulate Your Home Better With The Right Industrial Coatings

Keeping a home well-insulated is one of the

main contributors to high energy bills. Heating

and cooling systems are required to

accommodate climate changes that are

becoming more and more extreme these days.

Not too many people know that there are other

ways of insulating a house better straight from

the construction phase and one of them is by

using industrial coatings.

There are so many types of industrial coatings

these days and each has a specific function. There are coatings that retard fire; they are usually

made from special resins that instantly halt the spread of flames, while there are those that

prevent corrosion of building materials. The type that this article will focus on is the one that is

used for homes mainly to help maintain a comfortable temperature within the building. Its

important to point out, however, that while these coatings are used for insulation purposes,

they have other uses as well.

First sub-type is the industrial anti-condensation coating which reduces or completely halts

condensation from taking place. When condensation is prevented, it stays comfortably dry

inside the building -- theres no need to use the dehumidifier frequently. This is especially

helpful in preventing the proliferation of certain bacteria and mould that can affect the air

quality (which may trigger allergic reactions and cause certain diseases) inside the house, as

well as compromise the integrity of the structure materials. The key to using this type of

industrial coatings are that they work so much better if its laid on thick and even.

Second sub-type is the industrial DTI which works best as a thermal insulation coating. It has

the ability to thermally insulate up to 400 degrees Fahrenheit which is perfect in keeping the


5/105

house cool during the intensely hot summers. By using this type of coating for the home, the air

conditioning unit (yes, you will still need a cooling system because this coating is basically an

insulation supplement) will not be forced to work overtime when its incredibly hot outside meaning more energy savings. This coating has other functions as well, and one of them is

corrosion protection. According to industry experts, the industrial DTIs unique composition

makes it maximally efficient based on the thickness of application.

Last sub-type is the industrial highly-reflective coating which is actually more ideal for special

house features, such as the water tank. The application of this type of industrial coating keeps

the tank protected for solar loading which naturally affects the temperature of the contents of

the tank. The coating effectively blocks UV rays that heat up the water. Some people have also

tried using this coating for make-shift all-steel cabins or construction quarters.

The Value of Corrosion Protection

Putting up a business is no mean feat, especially when it

comes to sourcing and completing the tools and

equipment needed in daily operations. That is why it pays

for business owners to ensure their investments undergo

proper care, usage and maintenance that will keep every

unit in tip-top shape for the years to come. From huge

industrial machinery to storage centres, to the working

facilities and even the smallest tools of the trade

everything should be kept clean and properly functioning

to ensure productivity and safety in the workplace.

If youre the owner or manager of an industrial or

commercial operation, one of the most important upkeep

routines you should regularly follow is ensuring that

important equipment and facilities undergo the rightcorrosion protection services. Corrosion is caused by regular wear and tear, as well as variable

factors such as weather changes, humidity, exposure to salt water and several other

environmental conditions. If left undetected, it can lead to larger damages that may be

permanent.

There are various advantages for you, your people, your customers, and the industry in

general in ensuring proper protective and treatment methods for your equipment. Save

money from replacing damaged equipment, avoid delays in operations and ensure satisfaction


6/106

of your customers through delivery of quality products and services in time. Taking care of your

operational assets helps you take care of your workforce as well. Having properly functioning

equipment is a must according to occupational health and safety regulations, as faultymachines and broken tools have been proven to lead to accidents, injuries and illnesses in the

workplace.

Keeping equipment clean and orderly is not just done for aesthetic reasons, but more so to

ensure product safety quality. Corrosion protection is a must especially for the food and

beverage and water supply industry. The presence of rust in equipment can contaminate raw

ingredients in food factories, water reservoirs, sugar or grain milling operations. Most cases of

massive food poisoning have been traced to tainted facilities or assembly lines, leading to huge

losses in business profits and customer faith in the industry.

For this task, your equipment may be treated with abrasive blasting, which is a known method

for removing rust, mill scale, corrosion materials and foreign particles. Surfaces are often

cleaned, polished or roughened using abrasive blasting before the application of protective

coating. For concrete floors, applying anti-slip coating and self-levelling products prolong the

lifespan of structures and maximise safety of facilities as well. Potable water protective

coatings, on the other hand, keep drinking water tanks and containers at par with safety

standards.

For best results, consult with a protective coating services firm to help you identify the correct

protection methods for your business.

How To Choose Painting Contractors For Your Painting Needs

If you think that painting a home or a commercial

structure is simply all about picking up a brush and a

can of paint, then you are highly mistaken. It takes a

certain level of expertise to finish a painting job in a

short amount of time, and not everyone has the

necessary experience or training to achieve

professional results. In addition, homeowners may

find it a lot more convenient to hire painting

contractors as this can give them more freedom to

attend to other more important tasks, such as moving in furniture when the house is done or

supervising repairs and renovations being done to the property. On the other hand, it would be

terribly impractical for commercial building owners not to hire professional painters since they

would need to cover a lot of area very quickly.


7/107

If you have never hired a painting contractor before, then you might find yourself overwhelmed

from the sheer number of companies to choose from. Homeowners, for instance, may have to

choose not only among professional contractors but also friends and family membersvolunteering to do the job. While the latter may indeed save you money, you can actually get

better results if you choose to work with professionals (unless your friend or relative is one). So

how exactly can you choose the best painting contractors for your needs?

The first thing that you should look into is the area that the contractor specialises in. If you are

homeowner, then go for painting contractors that are experts in residential paint jobs.

Commercial contractors may work much faster since they are used to larger projects; however,

their prices may also be steeper, especially when all you need to paint is a few rooms in your

home.

The next thing you should check is the painting contractors credentials. Always remember that

not all painters are created the same, and some may be better at the job than others. A

professional contractor should have all the necessary training and certifications for the job. Of

course, contractors who possess more certifications to back up their services will very likely

charge higher. If you need to save more money, you can opt for lesser known painting

contractors; just do a background check on their services and also get customer feedback to

ensure that their cheap services are not merely the result of sloppy performance.

Lastly, check the fees offered for the services you need. Does the contractor charge fair prices?

Do they also offer insurance or warranties on their work? A good contractor will stand by their

work and provide guarantees to ensure that you are satisfied with the end result.

Causes Of Concrete Damage And Concrete Repair Methods To Address Them

Concrete is the material of choice for construction,

especially since it provides very strong, rock-like

foundation that can withstand damage throughout time.

Concrete is simply a mixture of aggregates, such as sand

and limestone, and cement bonded using water in a

chemical process called hydration. This process produces a

very sturdy material that is apt for constructing buildings,

roads, and other infrastructure in modern settings.

However, no matter how sturdy a material concrete is, it is

still prone to damage that must be addressed immediately

using the appropriate concrete repair method. While the


8/108

concrete can still last despite the damage, allowing destructive forces to continue can result in

more costly repairs in the future.

One of the most common causes of damage to concrete is the corrosion of steel

reinforcements within the structure. Steel bars are often placed in concrete to add more to its

tensile strength. Steel bars are usually protected from corrosion since concrete is very alkaline

and this alkalinity prevents the formation of rust. However, in some cases, the concrete used

for construction may have more chloride ions present, which then effectively destroying the

protective alkaline layer surrounding the steel reinforcements. When this happens, rust forms

on the bars, and since rust takes up more volume than steel, it presses into the surroundings

and leads to cracks in the structure.

Another common reason for cracking of concrete is disintegration from freeze-thaw cycles.Contractors and building owners must remember that concrete is a porous material, and as

such, permits the entry of water into small spaces within the structure. Trapped water that has

frozen takes up more spaces and thus it expands the structure. On the other hand, when it

thaws, the melted ice takes up less space, leaving the concrete with bigger spaces than it had

previously. A continuous cycle or freezing and thawing can greatly reduce the strength of a

structure because of the cracks it creates.

Concrete repair methods commonly used for addressing cracks includes injection with products

such as epoxy, polyurethane, or polyurea. Epoxy is one of the best products for crack injection

because of its immense bonding strength while polyurethane injections are elastomeric. Epoxy

takes a longer time to cure, while polyurethane can harden within a few minutes of application.

Because of these properties, epoxy is often chosen for structural repairs while polyurethane is

best for waterproofing structures and basic crack sealing.

Its important that the surfaces to be treated are thoroughly cleaned, to ensure that the

products injected within adhere well to the surface of the cracks, since materials such as oil and

grease may compromise contact of concrete repair products on the damaged surface.


9/10

Filename: PDF

Directory: D:\work\diamondpcs

Template:

C:\Users\ADMIN\AppData\Roaming\Microsoft\Templates\Normal.dotm

Title:

Subject:

Author: ADMIN

Keywords:

Comments:

Creation Date: 8/3/2012 2:52:00 PM

Change Number: 1

Last Saved On: 8/3/2012 3:50:00 PM

Last Saved By: ADMIN

Total Editing Time: 56 MinutesLast Printed On: 8/3/2012 3:57:00 PM

As of Last Complete Printing

Number of Pages: 8

Number of Words: 2,267 (approx.)

Number of Characters: 12,928 (approx.)


10/10

Industrial Coatings For Your Building And Construction

Documents

Transcript of Industrial Coatings For Your Building And Construction