Indirect Oil / Water Bath Heater

original hand drawing, 1980

Global Headquarters

FORAIN ItaliaVia G.B. Boeri, 1120141 Milano (ITALY)Tel. +39 02 8467345Fax +39 02 8465325

SubsidiaryAsia Paci�c Headquarters

37, Tannery Lane #04-10Tannery HouseSingapore 347790Tel. +65 6636 1826Fax +65 6636 0169

Subsidiary Myanmar

Parame Condo, Building 12+1Room 706, 7 �oorParame Street Hlaing TownshipYangon, Myanmar

SubsidiaryTurkey

Kozyatağı Mahallesi, Bayar Caddesi Rıza Çemberci İş Merkezi No: 72 Kat: 6 Daire: 10Kadıköy / İstanbul

www.forain.net #engineeringchallenges

ComponentWater/oil bath indirect heaters are designed to heat gases without the requirement of a high pressure vessel. They are used for heating the gas downstream of a reduction line, in order to prevent the formation of hydrates.

UseWater/oil bath indirect heater are supplied as a package complete with fuel gas system, control and safety systems either of electric or pneumatic type.

AssemblyThe heater is de�ned indirect because the gas �ow in a coil, which is submerged in an aqueous solution or indiatermic oil. This solution is heated by a combustion chamber equipped with a burner.

AdvantagesThe control and safety system, is able to detect all operating failures and to control the unit under every working condition in order to guarantee the correct outlet gas temperature.