Index 2014 Volume 20textination.de/en/dfv/mi/MI-Index 2014.pdf · Melliand International 2014 Index...

Melliand International 2014 1

Index 2014

Aakade, A.; Bagwan, A.S.; Koli, M.; Dalal, S.: Traveler weights: effective measures to control yarn quality andyarn breakage rate.............................213

Aibibu, D.; Cherif, C.; Hund, D.; Ripperger, S.; Kuhr, M.: Finishing of barrier textiles with functionalized microparticles by partial and specific application.........................................175

Aibibu, D.; Cherif, C.; Schröter, A.; Gerlach, G.; Wendler, J.; Tonndorf, R.;Nocke, A.: Textile-technological manufacturing of braided multilayer sensors for monitoring of wounds .....231

Baddhan, A.; Tyagi, G.K.: Elastic recovery properties ofelastane/viscose MJS core yarns .........146

Bagwan, A.S.: Impact of spinning technologies on cotton yarn properties ............................................79

- Harshal, P.; Patil, V.: Impact of blow room beater speed on yarn properties ..........................................152

- Koli, M.; Dalal, S.; Aakade, A.: Traveler weights: effective measures to control yarn quality and yarn breakage rate ....................................213

Bauer, J.; Sellin, M.; Brückner, P.; Meister, F.; Krieg, M.: Cellulose fiberscontaining vegetable oils and lipophilicvitamins for new applications ..............74

Beauduin, C.: ITMA Asia + CITME key to cost-effective automation and green solutions ....................................57

Behera, J.; Sengupta, A.: Spider silk: ancient biomaterial for functional textiles ..............................................201

Beier, O.; Spange, S.; Schimanski, A.;Ramm, M.; Pfuch, A.: Tailor-made surfaces by means of inline plasmacoating at atmospheric pressure ........177

Bhosale, N.; Pareek, V.; Eklahare, S.: Printing on wool: the secret is in preparation and pretreatment..............93

Bidu, J.; Mahltig, B.; Haase, H.; Grethe, T.: Antimicrobial finishing of textiles by modified clay minerals.......173

Biermann, I.: Com4 yarn in practice .....25Boucly, O.: New lab twisting and

cabling machine ..................................34Breugelmans, T.: Adhesion

improvements with water-based systems ...............................................48

Brückner, P.; Meister, F.; Krieg, M.; Bauer, J.; Sellin, M.: Cellulose fibers containing vegetable oils and lipophilicvitamins for new applications ..............74

Chatterjee, A.; Maity, S.; Mohapatra,H.S.: New generation natural fiber –akund floss ..........................................22

Chavan, H.V.; Patil, S.S.: Yarn performance with cold sizing .......84

Cherif, C.; Hund, D.; Ripperger, S.; Kuhr, M.; Aibibu, D.: Finishing of barrier textiles with functionalized microparticles by partial and specific application.........................................175

- Schröter, A.; Gerlach, G.; Wendler, J.;Tonndorf, R.; Nocke, A.; Aibibu, D.: Textile-technological manufacturing of braided multilayer sensors for monitoring of wounds.......................231

Comandar, C.: New structural elementsbased on stitch transfer .......................87

Dalal, S.; Aakade, A.; Bagwan, A.S.; Koli, M.: Traveler weights: effective measures to control yarn quality andyarn breakage rate.............................213

Dandgole, P.B.; Dudagi, I.B.; Prasad, J.;Surwase, V.S.; Yuvraj, T.; Deori, R.; Gotipamul, R.L.: Effect of cover factorand weave factor on flammability char -acteristics of 100 % cotton fabric ........35

Darji, A.: Lyocell denim garment washes ............44

- Shinde, R.: Impact of urea in ink-jet printing of 100 % viscose woven fabric.................................................168

Deori, R.; Gotipamul, R.L.; Dandgole, P.B.; Dudagi, I.B.; Prasad, J.;Surwase, V.S.; Yuvraj, T.: Effect of cover factor and weave factor on flammability characteristics of 100 % cotton fabric ........................35

Dolmans, R.; Steinmann, W.; Seide, G.;Gries, T.; Jandrey, S.: Influence of heatsetting on color fastness of polyamidetextile floorcoverings .........................224

Dorugade, V.; Ghongade, V.D.: Influence of 3 licker-in card on yarn quality .......................................154

Dorugade, V.A.: Effect of magnetizedwater on dyeing of cotton ...................90

- Mali, N.; Parsi, R.D.: Impact of feed roller, beater and grid bar gauge setting in flexi clean on yarn quality...211

Dudagi, I.B.; Prasad, J.; Surwase, V.S.;Yuvraj, T.; Deori, R.; Gotipamul, R.L.;Dandgole, P.B.: Effect of cover factor and weave factor on flammability char acteristics of 100 % cotton fabric...................................................35

Eklahare, S.; Bhosale, N.; Pareek, V.: Printing on wool: the secret is in preparation and pretreatment..............93

Feigl, J.: Perfect and clean coiling......................78

Fontana, B.: New monofilaments for a sustainable technical textile market...............................................148

Fortunato, G.; Rossi, R.M.; Guex, A.G.: Fibers for muscle tissue regeneration......................................150

Fraas, R.: New generation of rovingframes for high-quality rovings ............77

Gazzah, M.; Jaouachi, B.; Sakli, F.: Modeling residual bagging behavior of denim fabrics as function of frictionparameters ..........................................95

Gerlach, G.; Wendler, J.; Tonndorf, R.;Nocke, A.; Aibibu, D.; Cherif, C.; Schröter, A.: Textile-technological manufacturing of braided multilayer sensors for monitoring of wounds .....231

Germann, J.C.: New air-jet technology for the label market ...........................219

Ghongade, V.D.; Dorugade, V.: Influence of 3 licker-in card on yarn quality .......................................154

Gloy, Y.-S.: Industry 4.0 – the future ofthe textile production?...........................1

Deutscher Fachverlag GmbHMainzer Landstr. 25160326 Frankfurt/GermanyTel.: +49-69/75 95-13 93Fax: +49-69/75 95-12 90E-mail: [email protected]

Index 2014 Volume 20

Author Index Page Page Page

www.melliand.com

- Seide, G.; Gries, T.; Rübsam, U.; Schröter, A.: Ecodesign methodology for recyclable textile coverings used inthe construction and transport industry226

Gnägi, P.: European textile machinery industry, still leading?.........................129

Gotipamul, R.L.; Dandgole, P.B.; Dudagi, I.B.; Prasad, J.; Surwase, V.S.;Yuvraj, T.; Deori, R.: Effect of cover factor and weave factor on flammability characteristics of 100 % cotton fabric ............................35

Grethe, T.; Bidu, J.; Mahltig, B.; Haase, H.: Antimicrobial finishing of textiles by modified clay minerals.......173

Gries, T.; Jandrey, S.; Dolmans, R.; Steinmann, W.; Seide, G.: Influence ofheat setting on color fastness of polyamide textile floorcoverings ........224

- Rübsam, U.; Schröter, A.; Gloy, Y.-S.; Seide, G.: Ecodesign methodology for recyclable textile coverings used in theconstruction and transport industry ...226

Guex, A.G.; Fortunato, G.; Rossi, R.M.: Fibers for muscle tissue regeneration......................................150

Gujar, J.: Fast startup of rotor spinning machine with best piecing quality......158

Gutmann, J.S.; Textor, T.: Ionic liquids for finishing polyester fibers with cellulosic surfaces ..............................203

Haase, H.; Grethe, T.; Bidu, J.; Mahltig, B.:Antimicrobial finishing of textiles by modified clay minerals...................173

Halbe, A.V.: Polyurethane reactive hotmelts – sustainable alternative to flame lamination..................................51

Harshal, P.; Patil, V.; Bagwan, A.S.: Impact of blow room beater speed on yarn properties .............................152

Hasler, F.: Metallic card clothing with positive influence.........................81

Hayes, E.: World textile business 2013...............199

Hének, V.: Low energy noise absorbingspindle...............................................164

Hulle, A.; Patil, T.; Patil, A.: Effect of air pressure on air-covered yarn .........216

- Kadole, P.: Effect of punch density onproperties of polypropylene needle punched nonwovens .........................229

Hund, D.; Ripperger, S.; Kuhr, M.; Aibibu, D.; Cherif, C.: Finishing of barrier textiles with functionalized microparticles by partial and specific application ............................175

Jandrey, S.; Dolmans, R.; Steinmann, W.;Seide, G.; Gries, T.: Influence of heat setting on color fastness of polyamide textile floorcoverings ........224

Jaouachi, B.; Sakli, F.; Gazzah, M.: Modeling residual bagging behavior of denim fabrics as function of frictionparameters ..........................................95

Jianyong Yu; Xiaohong Qin; Rong Zhou:Comfort properties of modified polyester/cotton knitted fabrics ...........38

Kadole, P.; Hulle, A.: Effect of punch density on properties of polypropyleneneedle punched nonwovens ..............229

Kiechl, W.: Concept for fighting white PP in cotton .............................180

Koli, M.; Dalal, S.; Aakade, A.; Bagwan,A.S.: Traveler weights: effective measures to control yarn quality andyarn breakage rate.............................213

Krieg, M.; Bauer, J.; Sellin, M.; Brückner, P.; Meister, F.: Cellulose fiberscontaining vegetable oils and lipophilicvitamins for new applications ..............74

Kuhr, M.; Aibibu, D.; Cherif, C.; Hund, D.;Ripperger, S.: Finishing of barrier textileswith functionalized microparticles by partial and specific application...........175

Mafalda, A.; Weiß, H.-J.; Weiser, M.; Möhring, U.; Zimmermann, Y.; Pohlers,S.: Continuous dyeing methods for high quality PAN velours ......................42

Mahltig, B.; Haase, H.; Grethe, T.; Bidu, J.: Antimicrobial finishing of textiles by modified clay minerals.......173

Maity, S.; Mohapatra, H.S.; Chatterjee, A.: New generation natural fiber – akund floss ...................22

Mali, N.; Parsi, R.D.; Dorugade, V.A.: Impact of feed roller, beater and grid bar gauge setting in flexi clean on yarn quality ..................................211

Marsal, F.: Application of microcapsules in spinning ....................31

Meister, F.; Krieg, M.; Bauer, J.; Sellin, M.; Brückner, P.: Cellulose fiberscontaining vegetable oils and lipophilicvitamins for new applications ..............74

Mohapatra, H.S.; Chatterjee, A.; Maity, S.: New generation natural fiber – akund floss ...................22

Möhring, U.; Pohlers, S.; Mafalda, A.;Weiß, H.-J.; Zimmermann, Y.; Weiser, M.:Continuous dyeing methods for highquality PAN velours..............................42

More, V.; Patil, N.: New compact spinning machine for high-quality end products .....................................215

Müller, J.: New draw frames with additional innovations .......................210

Narkhedkar, R.N.: Influence of twist direction on tensile properties of double yarns........................................28

Nocke, A.; Aibibu, D.; Cherif, C.; Schröter, A.; Gerlach, G.; Wendler, J.;Tonndorf, R.: Textile-technological manufacturing of braided multilayer sensors for monitoring of wounds .....231

Paccanelli, A.: European textile finishing industry needs urgent political action ...................................185

Pareek, V.; Eklahare, S.; Bhosale, N.: Printing on wool: the secret is in preparation and pretreatment..............93

Parsi, R.D.; Dorugade, V.A.; Mali, N.: Impact of feed roller, beater and grid bar gauge setting in flexi clean on yarn quality ..................................211

Patil, A.; Hulle, A.; Patil, T.: Effect of air pressure on air-covered yarn .........216

Patil, N.; More, V.: New compact spinning machine for high-quality end products .....................................215

Patil, S.S.; Chavan, H.V.: Yarn performance with cold sizing .......84

Patil, T.; Patil, A.; Hulle, A.: Effect of air pressure on air-covered yarn .........216

Patil, V.; Bagwan, A.S.; Harshal, P.: Impact of blow room beater speed on yarn properties .............................152

Pfuch, A.; Beier, O.; Spange, S.; Schimanski, A.; Ramm, M.: Tailor-madesurfaces by means of inline plasmacoating at atmospheric pressure ........177

Pohlers, S.; Mafalda, A.; Weiß, H.-J.; Weiser, M.; Möhring, U.; Zimmermann,Y.: Continuous dyeing methods for high quality PAN velours ......................42

2 Melliand International 2014

Index 2014

Author Index Page Page Page

Issue 1 Pages 1 – 56




Volume 20

2014


Index 2014

Author Index Page Page Page Pradhan, C.; Teli, M.D.; Sheikh, J.:

Simultaneous natural dyeing and antibacterial finishing using chitosanfrom bio-waste ..................................171

Prasad, J.; Surwase, V.S.; Yuvraj, T.; Deori, R.; Gotipamul, R.L.; Dandgole,P.B.; Dudagi, I.B.: Effect of cover factor and weave factor on flammability characteristics of 100 % cotton fabric ............................35

Raghav, R.; Tuteja, R.: Studies on the environmental impact of colored fabrics: dope dyed versus piece dyed viscose fabrics....................................181

Ramm, M.; Pfuch, A.; Beier, O.; Spange,S.; Schimanski, A.: Tailor-made surfaces by means of inline plasma coating at atmospheric pressure.........................177

Ripperger, S.; Kuhr, M.; Aibibu, D.; Cherif, C.; Hund, D.: Finishing of barrier textiles with functionalized microparticles by partial and specific application ............................175

Rong Zhou; Jianyong Yu; Xiaohong Qin:Comfort properties of modified polyester/cotton knitted fabrics ...........38

Rossi, R.M.; Guex, A.G.; Fortunato, G.: Fibers for muscle tissue regeneration......................................150

Rübsam, U.; Schröter, A.; Gloy, Y.-S.; Seide, G.; Gries, T.: Ecodesign methodology for recyclable textile coverings used in the construction and transport industry .......................226

Rußler, A.: Use of hardwood pulp for production of high-tenacity viscose fibers.................................................207

Sakli, F.; Gazzah, M.; Jaouachi, B.: Modeling residual bagging behavior of denim fabrics as function of friction parameters ..............................95

Schimanski, A.; Ramm, M.; Pfuch, A.; Beier, O.; Spange, S.: Tailor-made surfaces by means of inline plasmacoating at atmospheric pressure ........177

Schnell, M.: Air-jet spinning machine with 200 spinning units .....................161

Schröter, A.; Gloy, Y.-S.; Seide, G.; Gries, T.; Rübsam, U.: Ecodesign methodology for recyclable textile coverings used in the construction and transport industry .......................226

- Gerlach, G.; Wendler, J.; Tonndorf, R.;Nocke, A.; Aibibu, D.; Cherif, C.: Textile-technological manufacturing of braided multilayer sensors for monitoring of wounds.......................231

Seide, G.; Gries, T.; Jandrey, S.; Dolmans,R.; Steinmann, W.: Influence of heat setting on color fastness of polyamidetextile floorcoverings .........................224

- Gries, T.; Rübsam, U.; Schröter, A.; Gloy, Y.-S.: Ecodesign methodology forrecyclable textile coverings used in theconstruction and transport industry ...226

Sellin, M.; Brückner, P.; Meister, F.; Krieg,M.; Bauer, J.: Cellulose fibers containingvegetable oils and lipophilic vitamins for new applications ............................74

Sengupta, A.; Behera, J.: Spider silk: ancient biomaterial forfunctional textiles ..............................201

Sheikh, J.; Pradhan, C.; Teli, M.D.: Simultaneous natural dyeing and antibacterial finishing using chitosanfrom bio-waste ..................................171

Shinde, R.; Darji, A.: Impact of urea in ink-jet printing of 100 % viscose woven fabric .....................................168

Spange, S.; Schimanski, A.; Ramm, M.;Pfuch, A.; Beier, O.: Tailor-made surfaces by means of inline plasmacoating at atmospheric pressure ........177

Steinmann, W.; Seide, G.; Gries, T.; Jandrey, S.; Dolmans, R.: Influence of heat setting on color fastness of polyamide textile floorcoverings ........224

Surwase, V.S.; Yuvraj, T.; Deori, R.; Gotipamul, R.L.; Dandgole, P.B.; Dudagi, I.B.; Prasad, J.: Effect of cover factor and weave factor on flammability characteristics of 100 %cotton fabric........................................35

Teli, M.D.; Sheikh, J.; Pradhan, C.:


Textor, T.; Gutmann, J.S.: Ionic liquids for finishing polyester fibers with cellulosic surfaces ..............................203

Tonndorf, R.; Nocke, A.; Aibibu, D.; Cherif, C.; Schröter, A.; Gerlach, G.;Wendler, J.: Textile-technological manufacturing of braided multilayer sensors for monitoring of wounds .....231

Tuteja, R.; Raghav, R.: Studies on the environmental impact of colored fabrics: dope dyed versus piece dyed viscose fabrics....................................181

Tyagi, G.K.; Baddhan, A.: Elastic recovery properties ofelastane/viscose MJS core yarns .........146

Wang, C.: Simulating and characterizingairflow inside fiber condensing zone on pneumatic compact spinning machine ............................................159

Weiser, M.; Möhring, U.; Zimmermann,Y.; Pohlers, S.; Mafalda, A.; Weiß, H.-J.: Continuous dyeing methods for highquality PAN velours..............................42

Weiß, H.-J.; Weiser, M.; Möhring, U.; Zimmermann, Y.; Pohlers, S.; Mafalda, A.:Continuous dyeing methods for highquality PAN velours..............................42

Wendler, J.; Tonndorf, R.; Nocke, A.; Aibibu, D.; Cherif, C.; Schröter, A.; Gerlach, G.: Textile-technological manufacturing of braided multilayer sensors for monitoring of wounds .....231

Xiaohong Qin; Rong Zhou; Jianyong Yu:Comfort properties of modified polyester/cotton knitted fabrics ...........38

Yuvraj, T.; Deori, R.; Gotipamul, R.L.; Dandgole, P.B.; Dudagi, I.B.; Prasad, J.;Surwase, V.S.: Effect of cover factor and weave factor on flammability characteristics of 100 % cotton fabric..35

Zimmermann, Y.; Pohlers, S.; Mafalda, A.;Weiß, H.-J.; Weiser, M.; Möhring, U.:Continuous dyeing methods for highquality PAN velours..............................42

Subject Index Page Page Page Fibers/YarnsAkund floss – new generation

natural fiber ........................................22Brief information......................5, 6, 58-60,

.......................................134, 187, 188Cellulose fibers containing vegetable

oils and lipophilic vitamins for new applications .........................................74

Company information ....5, 6, 58, 134, 187

Elastic recovery properties of elastane/viscose MJS core yarns .........146

EU-28: turnover in man-made fiber industry 2013 ....................................147

Fibers for muscle tissue regeneration......................................150

Global fiber production........................132Ionic liquids for finishing polyester

fibers with cellulosic surfaces.............203

New monofilaments for a sustainabletechnical textile market .....................148

Spider silk: ancient biomaterial for functional textiles ..............................201

Use of hardwood pulp for production of high-tenacity viscose fibers............207

World apparel fiber consumption.............4World market trends for false-twist

draw-texturing machines ...................200


Index 2014

SpinningAir-jet spinning machine with 200

spinning units ....................................161Application of microcapsules in

spinning ..............................................31Com4 yarn in practice ............................25Draw frames with additional

innovations........................................210Effect of air pressure on air-covered

yarn...................................................216Fast startup of rotor spinning machine

with best piecing quality....................158Fiber test instrument to optimize cotton

yarn processes .....................................27Impact of blow room beater speed

on yarn properties .............................152Impact of feed roller, beater and

grid bar gauge setting in flexi clean on yarn quality ..................................211

Impact of spinning technologies on cotton yarn properties ....................79

Individual automation in package winding ...............................162

Influence of 3 licker-in card on yarn quality .......................................154

Influence of twist direction on tensile properties of double yarns ...................28

Innovation update for compact spinning technology ..........................157

ITMA Asia + CITME: preview ...........98, 99, 108, 109, 111, 115, 116,

118-120, 122, 126Lab twisting and cabling machine ..........34Low energy noise absorbing spindle.....164Metallic card clothing with positive

influence .............................................81New compact spinning machine for

high-quality end products ..................215Perfect and clean coiling ........................78Roving frames for high-quality rovings ...77Short-staple spinning shipments

2013 .................................................209Simulating and characterizing airflow

inside fiber condensing zone on pneumatic compact spinning machine ............................................159

Traveller weights: effective measures to control yarn quality and yarn breakage rate ....................................213

WeavingEffect of cover factor and weave factor

on flammability characteristics of 100 % cotton fabric ............................35

ITMA Asia + CITME: preview ...........98, 99, 104, 106, 108, 109, 120, 124

New air-jet portfolio ............................165New air-jet technology for the label

market...............................................219Slight recovery for shuttle-less weaving

machines ...........................................218

Weaving with stainless steel or bronze –light and exclusive designs with metal.................................................221

Yarn performance with cold sizing .........84Yarn tensioner for fine glass filament

yarns ...................................................34

KnittingCircular and flat knitting machinery

shipments 2013.................................222Comfort properties of modified

polyester/cotton knitted fabrics ...........38ITMA Asia + CITME: preview .........98, 104,

108, 116, 121New multiaxial machine ........................86New structural elements based on

stitch transfer ......................................87

Finishing3D print finished textile product.............47Adhesion improvements with

water-based systems ...........................48Antimicrobial finishing of textiles

by modified clay minerals...................173Continuous dyeing methods for

high quality PAN velours ......................42Eco-friendly dyeing technology with

indigo and sulfur dyes .......................166Effect of magnetized water on dyeing

of cotton .............................................90European textile finishing industry

needs urgent political action..............185Finishing of barrier textiles with

functionalized microparticles by partial and specific application...........175

FR treatment on synthetic-cotton fabrics .................................................14

Impact of urea in ink jet printing of 100% viscose woven fabric ...............168

Inkjet printing in the textile printing industry ...............................................46

ITMA Asia + CITME: preview ..........98-111, 114, 121, 123, 126

Lyocell denim garment washes...............44New blue shades for denim..................176New generation of machine control .......47New yarn dyeing machine....................170Polyurethane reactive hot melts – sustain-

able alternative to flame lamination.....51Printing on wool: the secret is in

preparation and pretreatment..............93Self-cleaning textile technology..............14Simultaneous natural dyeing and

antibacterial finishing using chitosanfrom bio-waste ..................................171

Studies on the environmental impact of colored fabrics: dope dyed versus piece dyed viscose fabrics ..................181

Tailor-made surfaces by means of inlineplasma coating at atmospheric pressure.............................................177

Wastewater recycling for textile dyeing industry – China bets on Made in Germany ...........................................167

NonwovensAdvanced fiber control on nonwovens

cards ...................................................53Brief information............................7, 8, 96Company information ............................96Effect of punch density on properties of

polypropylene needlepunched nonwovens........................................229

ITMA Asia + CITME: preview ...........97, 98, 103, 122

ResearchAkund floss – new generation

natural fiber ........................................22Antimicrobial finishing of textiles

by modified clay minerals...................173Application of microcapsules in

spinning ..............................................31Cellulose fibers containing vegetable

oils and lipophilic vitamins for new applications .................................74

Comfort properties of modifiedpolyester/cotton knitted fabrics ...........38

Continuous dyeing methods for high quality PAN velours ......................42

Ecodesign methodology for recyclable textile coverings used in the construction and transport industry .............................................226

Effect of air pressure on air-covered yarn...................................................216

Effect of cover factor and weave factor on flammability characteristics of 100 % cotton fabric ............................35

Effect of magnetized water on dyeing of cotton .............................................90

Effect of punch density on properties of polypropylene needlepunched nonwovens........................................229

Elastic recovery properties of elastane/viscose MJS core yarns .........146

Finishing of barrier textiles with functionalized microparticles by partial and specific application...........175

Graphene membranes as ultimate filter ..................................................228

Impact of blow room beater speed on yarn properties .............................152

Impact of feed roller, beater and grid bar gauge setting in flexi clean on yarn quality ..................................211

Impact of spinning technologies on cotton yarn properties ....................79

Impact of urea in ink jet printing of 100% viscose woven fabric ...............168

Influence of 3 licker-in card on yarn quality ...............................................154

Subject Index Page Page Page


Index 2014

Subject Index Page Page Page Influence of heat setting on color

fastness of polyamide textile floorcoverings....................................224

Influence of twist direction on tensile properties of double yarns ...................28

Ionic liquids for finishing polyester fiberswith cellulosic surfaces ......................203

Modeling residual bagging behavior of denim fabrics as function of friction parameters ..........................................95

New structural elements based on stitch transfer ......................................87

Polyurethane reactive hot melts – sustainable alternative to flame lamination ...........................................51

Printing on wool: the secret is in preparation and pretreatment..............93

Simulating and characterizing airflow inside fiber condensing zone on pneumatic compact spinning machine ............................................159


Spider silk: ancient biomaterial for functional textiles ..............................201

Studies on the environmental impact ofcolored fabrics: dope dyed versus piece dyed viscose fabrics ..................181

Tailor-made surfaces by means of inline plasma coating at atmosphericpressure.............................................177

Textile-technological manufacturing ofbraided multilayer sensors for monitoring of wounds.......................231

Traveller weights: effective measures to control yarn quality and yarn breakage rate ....................................213

Yarn performance with cold sizing .........84

Textile IndustryAdvanced fiber control on nonwovens

cards ...................................................53Brief information....................5-21, 41, 43,

60-71, 133-145, 156, 158, 172, 187-198

Circular and flat knitting machinery shipments 2013.................................222

Company information.......5-21, 43, 60-71, 133-145, 187-198

Concept for fighting white PP in cotton ...............................................180

Ecodesign methodology for recyclable textile coverings used in the construction and transport industry .............................................226

Effect of punch density on properties of polypropylene needle punched nonwovens........................................229

Environmental impact measuring software ............................................183

EU-28: turnover in man-made fiber industry 2013 ....................................147

European textile finishing industry needs urgent political action..............185

European textile machinery industry, still leading? ......................................129

Factor+ concept expresses innovativepower for Swiss textile machinery sector ..................................................72

Graphene membranes as ultimate filter ..................................................228

Improved heat setting performance .....223Industry 4.0 – the future of the

textile production?.................................1Influence of heat setting on color

fastness of polyamide textile floorcoverings....................................224

Innovative dosing system .....................223ITMA Asia + CITME key to cost-effective

automation and green solutions ..........57ITMA Asia + CITME: preview ...........97-127Management ................10, 12, 14, 16, 62,

64, 66, 68, 136, 138, 140, 190, 192, 194, 196

Modeling residual bagging behavior of denim fabrics as function of friction parameters ..............................95

New publications ...........................30, 138Pneumatic cord and yarn grips .............223Robots and silkworms create silk

pavilion ...............................................50Short-staple spinning shipments

2013 .................................................209Slight recovery for shuttle-less

weaving machines .............................218Studies on the environmental impact

of colored fabrics: dope dyed versus piece dyed viscose fabrics ..................181

Textile-technological manufacturing ofbraided multilayer sensors for monitoring of wounds.......................231

World market trends for false-twist draw-texturing machines ...................200

World textile business 2013.................199

adidas 1, 68, 142Aditya Birla Group 44Advansa 190AESA Air Engineering 97Aglika 140Akarca Mensucat 69Aksa Akrilik 133Alexium International 12, 14, 142Alperteks Mensucat 197Alpha Retail Group 8American & Efird 66Americhem 16AMSilk 201Andritz Nonwoven 97Anker-Teppichboden Gebr. Schoeller 226Aquafil 226Arahne 19Archroma 12, 14, 68, 142, 194Asahi Kasei Fibers 134Atlas MTT 225Aunde 192Autefa Solutions 98Bamberger Kaliko 12

BASF 141, 194, 195, 196Bayer 133Bayer MaterialScience 68, 142, 196Bekaert 53Benecke-Kaliko 193Benetton 8Benniger 72, 98Beyteks Tekstil 69Binsfeld Engineering 99Biotti Card Clothing 98Birla Cellulose 44, 168, 181bluesign technologies 8BMSvision 98Bonas Textile Machinery 99Bräcker 116Brückner Trockentechnik 71, 99,

140, 144, 145Brugman Holland 100Hermann Bühler 198Cavitec 123China Hi-Tech Group 14, 20Chomarat Textiles Industries 193CHT R. Beitlich 142

Clariant 16, 68, 194Coats 139Cobble 126ContiTech 193Cytec Industries 133Daewoo International 140Daimo 120Desso 10DiloGroup 103DiloSpinnbau 103DiloTemafa 103Dolan 133Dollfus & Muller 104Dong-A T.O.L. 197Dow Chemical 67Dralon 133, 190DSM 141DuPont 16, 133DuPont Protection Technologies 60Durst Phototechnik 18DyStar 16, 69, 141,

176, 197, 225Ekart Tekstil 71

Company Index Page Page Page


Index 2014

Electro-Jet 31Elif Iplik Tekstil 69Erhardt+Leimer 108Esquel 72Essex Flameproofing 14Far Eastern New Century 18Fehrer Automotive 192Fiber Glass Industries 193Fil Control 99Fisipe 133Flash 10Flawa 66Fleissner 136Fong’s Industries 14, 20, 64, 70,

102, 144, 145, 197Fong’s National Engineering 145Formax 70fortiss 1Freudenberg 136, 140Gavazzi 112Gemini Business Solutions 1Gerber Technology 71, 198Glanzstoff Industries 136, 207Goller 102Graf + Cie. 81, 116Grasim Industries 44, 168, 181Willy Grob 106Groz-Beckert 104, 198, 221Gruschwitz 5GSD 139Gualchierani Baling Systems 107Gul Ahmed Textile Mills 71Gütermann 66Hänsel Textil 140Has Sentetik Cuval 220Haver & Boecker 221HeiQ Materials 16Hergeth 10August Herzog 107Himson 200Hoftex 66Huntsman Textile Effects 43, 194, 195Hunziker 108ICAP SIRA Chemicals and Polymers 68Indorama 10Instron 223Interface Europe 226Invista 5, 62Iro 109Isotex Engineering 123Itema 20, 66, 106, 138, 143, 165, 197Jagenberg Textile 143Jakob Müller 72, 219James H. Heal 18, 69, 156, 197Jeanologia 21, 183Johnson Controls 1Jossi Systems 18, 180Jowat 64Karl Mayer 19, 34, 70, 108, 140, 144Kelheim Fibres 187Kiian Group 43, 141, 142Kraig Biocraft Laboratories 202KSL Keilmann Sondermaschinenbau 1, 71Kuraray Europe 142Kusters Calico Machinery 143Kusters Zima 143Kyocera Fineceramics 46Lanxess 60, 187, 192Laroche 107Lectra 16, 18, 21, 68, 70, 138, 145, 196

Lenzing 5, 6, 12, 60, 64, 132, 134, 190, 192, 198

Lenzing Instruments 110, 125Liba Maschinenfabrik 19Lindauer Dornier 191Linz Textil 198Loris Bellini 106Low & Bonar 70Luckytex 21Luna Innovation 14M. Dohmen 142Master 166Matesa Tekstil 144MCS Group 111Memminger-IRO 198Mesdan 112Milliken 140Miroglio Textile 46Mitsubishi Rayon 6Monforts 18, 19, 20, 21, 70, 71,

96, 102, 110, 144, 197Monforts Fong’s 70, 102Montalvo 10MS Printing Solutions 46Multifabs 145Murata Machinery 111NatureWorks 187Neuenhauser 114Newport Sensors 194Nexia Biotechnology 201Nextrusion 60, 187Nike 18Nilit 60Nishat Mills 20, 144Novibra Boskovice 116, 164Novozymes 195NSC fiber to yarn 108Nylstar 134Obem 114Oeko-Tex 16Oerlikon 12, 18Oerlikon Barmag 20, 70, 114, 200, 223Oerlikon Manmade Fibers 70, 71, 114,

143, 192, 196Oerlikon Neumag 70, 99, 114Orafol Europe 167Owens Corning 67Pattern Design 19PCI Fibres 6, 61, 187, 230PE International 187Perachem 94Perlon Nextrusion Monofil 187Perlon-Monofil 60, 187Petit & Cie. 111Philips 10PHP Fibers 10Picanol 71, 109, 138,

145, 196, 197Pinter 32Pitt 167Ploucquet 10Power-Heat-Set 223, 224Premium Textile Components 116Priyadarshini Sahakari Soot Girni 152Prosperity Knitwear 193Quick-Med Technologies 67Raymond 5Real Knitting 8Reggiani Macchine 126Retech 113

Richard Hough 21, 158Rieter 14, 18, 25, 72, 77, 78, 115, 129,

142, 144, 158, 161, 194, 210, 215, 227ROJ 109Rossari Labtech Venture 171Rotocraft 79Rowasol 223Saertex 41, 193Sahm 112Salmoiraghi 119Sanitized 16, 67Santex Group 123, 138Sapphire Finishing Mills 19Sateri 5, 60Saurer 118, 144Saurer Allma 118Saurer Jintan 118Saurer Schlafhorst 21, 69, 118, 144,

145, 157, 162, 194, 197, 198, 214Saurer Volkmann 118Savio 119Schappe Group 140Schoeller Technologies 67Schönherr Textilmaschinenbau 120Sensient Technology 46Serafin 60SGL Carbon 5, 133Shima Seiki 117Shrivallabh Pittie Group 10Sider Arc 148Skytex Mexico 20Sohler-Neuenhauser 114Solidian 198Solvay Rhodia Fibras Brazil 134Sonobond Ultrasonic 20SperottoRimar 123SPGPrints 19Spindelfabrik Suessen 116SR Webatex 136SSM Giudici 120, 197, 200SSM Schärer Schweiter Mettler 62, 120,

197, 200Starlinger 220Stäubli 72, 120Stoll 66Strumpfwerk Lindner 76Superba 122Sympatex Technologies 8Tamicare 47Tanatex Chemicals 14, 48, 195Tecnon OrbiChem 60Teijin 66TenCate 62, 67, 193, 194Tenowo 66Terrot 121Textechno Herbert Stein 125Textiles Intelligence 67Thai Acrylic Fibre 133Then 102Then Maschinen 47Thermore 68Thies 121, 170Tirotex 214TJ Beall 43TMT 200Tonello 144Topas 176Toray Industries 12Toyota Tsusho 141Trevira 5, 190



Index 2014

Triumph International 198Trützschler 19, 122, 136Trützschler Card Clothing 122Trützschler Man-Made Fibers 122Trützschler Nonwovens 122Trützschler Switzerland 19, 99Tsudakoma 124T-Tech Japan 124UltraTech International 14

Uster Technologies 18, 27, 62, 72, 125, 180, 198

Vald. Henriksen 132Van de Wiele 126Verdol 34, 126Verseidag-Indutex 167Wacker 12Wacker Metroark Chemicals 12Weibo 140

Westex 140Whaleys 94Willy Italiana 127Woolmark 5Xentrys 224Xetma Vollenweider 117Xorella 102J. Zimmer Maschinenbau 20Zouping Tongda Textile 144


Issue Main Topics Conferences/Trade Shows

1 March New fiber developments Inlegmash 2015Publication date: Global cotton markets March 14-17, 2015 in Moscow/RussiaMarch 27, 2015 Textured yarns Usetec 2015

Spinning technologies April 8-11, 2015 in Geneva/SwitzerlandWeaving technologies 2nd Intl. Conference on Natural Fibers ICNFTextile floorcoverings April 27-29, 2015 in Sao Miguel/PortugalKnitting technologies Techtexti l 2015Dyeing, printing, finishing May 4-7, 2015 in Frankfurt/GermanyTechnical textiles (Techtextil 2015 preview) Texprocess 2015Making-up (Texprocess 2015 preview) May 4-7, 2015 in Frankfurt/GermanyCurrent market trends

2 July New fiber developments 54th Man-Made Fibers Congress DornbirnPublication date: Techtextil 2015: report September 16-18, 2015 in Dornbirn/AustriaJuly 6, 2015 Spinning technologies / Weaving technologies

Knitting technologies / Carpet technologiesDyeing, printing, finishingTechnical textiles and nonwovensTexprocess 2015: reportCurrent market trends

3 October New fiber developments A+A 2015Publication date: ITMA 2015: preview on new machinery for October 27-30, 2015 in Düsseldorf/GermanyOctober 27, 2015 fiber production, spinning, weaving, knitting ITMA 2015

textile finishing, technical textiles and November 12-19, 2015 in Milan/Italynonwovens production 9th Aachen-Dresden Intl. Texti le ConferenceSpinning technology / Weaving technology November 26/27, 2015 in Aachen/GermanyKnitting technology / Dyeing, printing, finishingGlobal textile machinery tradeMaking-up / Current market trends

4 December Global fiber markets Heimtexti l 2016Publication date: New fiber developments January 12-15, 2016 in Frankfurt/GermanyDecember 15, 2015 Spinning technologies / Weaving technologies Domotex 2016

News in dyeing, printing, finishing January 16-19, 2016 in Hanover/GermanyWorld market trends for false-twist texturingmachines, spinning, weaving as well asknitting machines (ITMF)Nonwovens / Technical textilesCurrent market trends

Editorial Program 2015

Index 2014 Volume 20textination.de/en/dfv/mi/MI-Index 2014.pdf · Melliand International 2014 Index...

Documents

Transcript of Index 2014 Volume 20textination.de/en/dfv/mi/MI-Index 2014.pdf · Melliand International 2014 Index...