Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle...
-
Upload
clifford-malone -
Category
Documents
-
view
215 -
download
0
Transcript of Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle...
![Page 1: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/1.jpg)
Important Points from Last Lecture• The Peclet number, Pe, describes the competition between particle
disordering because of Brownian diffusion and particle ordering under a shear stress.
• At high Pe (high shear strain rate), the particles are more ordered; shear thinning behaviour occurs and decreases.
• van der Waals’ energy acting between a colloidal particle and a semi- slab (or another particle) can be calculated by summing up the intermolecular energy between the constituent molecules.
• Macroscopic interactions can be related to the molecular level. Forces are found by differentiating the interaction energy with respect to the distance of separation.
• The Hamaker constant, A, contains information about molecular density () and the strength of intermolecular interactions (via the van der Waals’ constant, C): A = 22C
![Page 2: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/2.jpg)
PH3-SM (PHY3032)
Soft MatterLecture 8
Introductions to Polymers and Semi-Crystalline Polymers
29 November, 2011
See Jones’ Soft Condensed Matter, Chapt. 5 & 8
![Page 3: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/3.jpg)
Definition of PolymersPolymers are giant molecules that consist of many repeating units. The molar mass (molecular weight) of a molecule, M, equals moN, where mo is the the molar mass of a repeat unit and N is the number of units.
Synthetic polymers never have the same value of N for all of its constituent molecules, but there is a Gaussian distribution of N.
Polymers can be synthetic (such as poly(styrene) or poly(ethylene)) or natural (such as starch (repeat units of amylose) or proteins (repeat unit of amino acids)).
Synthetic polymers are created through chemical reactions between smaller molecules, called “monomers”.
The average N (or M) has a huge influence on mechanical properties of polymers.
![Page 4: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/4.jpg)
Examples of Repeat Units
![Page 5: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/5.jpg)
Molecular Weight Distributions
In both cases: the number average molecular weight, Mn = 10,000
M M
Fraction of molecules
![Page 6: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/6.jpg)
Molecular Weight of Polymers
The molecular weight can be defined by a number average that depends on the number of molecules, ni, having a mass of Mi:
The polydispersity index describes the width of the distribution. In all cases:
MW/MN > 1
The molecular weight can also be defined by a weight average that depends on the weight fraction, wi, of each type of molecule with a mass of Mi:
ii
iiii Mn
MnMw
2
==MW
MN i
ii
nMn
== Total mass divided by the total number of molecules
![Page 7: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/7.jpg)
Types of Copolymer MoleculesWithin a single molecule, there can be “permanent order/disorder” in copolymers consisting of two or more different repeat units.
Diblock
Alternating
Random orStatistical
Can also be multi (>2) block.
![Page 8: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/8.jpg)
Semi-Crystalline Polymers
• It is nearly impossible for a polymer to be 100% crystalline.
• Typically, the level of crystallinity is in the range from 20 to 60%.
• The chains surrounding polymer crystals can be in the glassy state, e.g. in poly(ethylene terephthalate) or PET
• The chains can be at a temperature above their glass transition temperature and be “rubbery”, e.g. in poly(ethylene) or PE
• The density of a polymer crystal is greater than the density of a polymer glass.
![Page 9: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/9.jpg)
15 m x 15 m
Poly(ethylene) crystal
5 m x 5 m
Polymer crystals can grow up to millimeters in size.
Crystals of poly(ethylene oxide)
Examples of Polymer Crystals
![Page 10: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/10.jpg)
•The unit cell is repeated in three directions in space.
•Polyethylene’s unit cell contains two ethylene repeat groups (C2H4).
•Chains are aligned along the c-axis of the unit cell.
Crystal Lattice Structure
Polyethylene
From G. Strobl, The Physics of Polymers (1997) Springer, p. 155
![Page 11: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/11.jpg)
Structure at Different Length Scales• Chains weave back and forth to create crystalline sheets,
called lamella.• A chain is not usually entirely contained within a lamella:
portions of it can be in the amorphous phase or bridging two (or more) lamella.
• The lamella thickness, L, is typically about 10 nm.
L
From R.A.L. Jones, Soft Condensed Matter, O.U.P. (2004) p. 130
Lamella stacks
![Page 12: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/12.jpg)
Structure at Different Length Scales• Lamella usually form at a nucleation site and grow outwards.• To fill all available space, the lamella branch or increase in
number at greater distances from the centre.• The resulting structures are called spherulites.• Can be up to hundreds of micrometers in size.
From G. Strobl, The Physics of Polymers (1997) Springer, p. 148
![Page 13: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/13.jpg)
Hierarchical Structures of Chains in a Polymer Crystal
• Chains are aligned in the lamella in a direction that is perpendicular to the direction of the spherulite arm growth.
• Optical properties are anisotropic.From I.W. Hamley, Introduction to
Soft Matter, p. 103
![Page 14: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/14.jpg)
Crossed polarisers:
No light can pass!
Crossed Polarisers Block Light Transmission
http://www.kth.se/fakulteter/TFY/kmf/lcd/lcd~1.htm
Parallel polarisers:
All light can pass
• An anisotropic polymer layer between crossed polarisers will “twist” the polarisation and allow some light to pass.
• The pattern is called a “Maltese cross”.
![Page 15: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/15.jpg)
Observing Polymer Crystals Under Crossed Polarisers
Light is only transmitted when anisotropic optical properties “twist” the polarisation of the light.
![Page 16: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/16.jpg)
Temperature, T
Free
ene
rgy,
G
Free Energy of Phase Transitions
Crystalline state
Liquid (melt) state
Tm()
• The state with the lowest free energy is the stable one.
• Below the equilibrium melting temperature, Tm(), the crystalline state is stable.
•The thermodynamic driving force for crystallisation, G,
increases when cooling below the equilibrium Tm ().G
Undercooling, T, is defined as Tm – T.
![Page 17: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/17.jpg)
Thermodynamics of the Phase Transition
•Enthalpy of melting, Hm: heat is absorbed when going from the crystal to the melt.
•Enthalpy of crystallisation: heat is given off when a molten polymer forms a crystal.
•The melting temperature, Tm, is always greater than the crystallisation temperature.
•The phase transitions are broad: they happen over a relatively wide range of temperatures.
Heat flows in
Heat flows out
From G. Strobl, The Physics of Polymers (1997) Springer
Hm
![Page 18: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/18.jpg)
Xu et al., Nature Materials (2009) 8, 348.
Crystals from small molecules grow one molecule at a time.
Entire chains must join the polymer crystal at one time.
Crystal Growth Mechanisms
L
![Page 19: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/19.jpg)
Melt to crystal: Increase in Gibbs’ free energy from the creation of an interface between the crystal and amorphous region. When a single chain joins a crystal:
At equilibrium: energy contributions are balanced and G = 0.
22 aG f
Melt to crystal (below Tm): Decrease in Gibbs’ free energy because of the enthalpy differences between the states
)()(2
mm
mm T
TLaH
T
TVHG
(Enthalpy change per volume, H m) x (volume) x (fractional undercooling)
Thermodynamics of the Crystallisation/Melting Phase Transition
L
a2
f is an interfacial energy
![Page 20: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/20.jpg)
fm
m aLaT
TH 22 2)(
Thermodynamics of the Crystallisation/Melting Phase Transition
From G = 0:
LHT
LTT
m
f
m
mm
2
)(
)()(Re-arranging and writing undercooling in terms of Tm(L):
LH
TLTT
LT
LH m
fmm
m
m
m
f 21)()(
)(
)(21Solving for Tm(L):
Conclusion: We see that a chain-folded crystal (short L) will melt at a lower temperature than an extended chain crystal (very large L).
![Page 21: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/21.jpg)
a
Crystal growth is from the edge of the lamella.
The lamella grows a distance a when each chain is added.
Lamellar growth directionLamella thickness, L
Lamellar Crystal Growth
LFrom U.W. Gedde, Polymer Physics (1995) Chapman & Hall, p. 145
From U.W. Gedde, Polymer Physics (1995) Chapman & Hall, p. 161
![Page 22: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/22.jpg)
Free energy
G
TS
The Entropy Barrier for a Polymer Chain to Join a Crystal
Re-drawn from R.A.L. Jones, Soft Condensed Matter, O.U.P. (2004) p. 132
Melted state
Crystalline state
![Page 23: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/23.jpg)
Melt to crystal: the rate of crystal growth is equal to the product of the frequency 1) of “attempts” and the probability of going over the energy barrier (TS):
Crystal to melt: the rate of crystal melting is equal to the product of the frequency 1) of “attempts” and the probability of going over the energy barrier (TS + G):
k
S
kT
STumc expexp 11
kT
G
k
S
kT
GSTucm expexp
)(exp 11
Net growth rate, u: the net rate of crystal growth, u, is equal to the difference between the two rates:
)exp(1expexpexpexp 111
kT
G
k
S
kT
G
k
S
k
Suu cmmc
The Rate of Crystal Growth, u
![Page 24: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/24.jpg)
a
Crystal growth is from the edge of the lamella.
The lamella grows a distance a when each chain is added.
Lamellar growth directionLamella thickness, L
Lamellar Crystal Growth
LFrom U.W. Gedde, Polymer Physics (1995) Chapman & Hall, p. 145
From U.W. Gedde, Polymer Physics (1995) Chapman & Hall, p. 161
![Page 25: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/25.jpg)
The velocity of crystal growth can be calculated from the product of the rate of growth (u, a frequency) and the distance added by each chain, a. Also, as G/kT << 1, exp(-G/kT) G/kT:
kT
G
k
Sa
kT
G
k
Sauav exp)exp(1exp 11
fm
m aT
TLaHG 22 2
)(
But from before (slide 19) - G is a function of L:
a
LS ~
The entropy loss in straightening out a chain is proportional to the number of units of size a in a chain of length L:
)2)(
(exp1
~ 22f
mm a
T
TLaH
a
cL
kTv
The Velocity of Crystal Growth,
We see that the crystal growth velocity is a function of lamellar thickness, L.
Finally, we find:
![Page 26: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/26.jpg)
The Fastest Growing Lamellar Thickness, L*
)2)(
(exp~ 22f
mm a
T
TLaH
a
cLv
L dependence
To find the maximum , set the differential = 0, and solve for L = L*.
))((
)(2*
TTH
T
c
aL
mm
mf
a
c
a
cLLa
T
THaa
T
TH
a
cL
dL
d
m
mf
m
m exp)(
2)(
exp0 222
Solve for L = L*:
fm
m
m
m caT
THLc
T
TH 2)()(
L
L*
![Page 27: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/27.jpg)
Tmconst
TTH
T
c
aL
mm
mf
1
.~))((
)(2*
Tm()-T
TTT m )(
Lamellar Thickness is Inversely Related to Undercooling
Original data from Barham et al. J. Mater. Sci. (1985) 20, p.1625
Jones, Soft Condensed Matter, p. 134
Experimental data for polyethylene.
![Page 28: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/28.jpg)
Xu et al., Nature Materials (2009) 8, 348.
Chains Can Re-organise to Reduce the Number of Folds
![Page 29: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/29.jpg)
Temperature Dependence of Crystal Growth Velocity,
The rate at which a chain attempts to join a growing crystal, , is expect to have the same temperature-dependence as the viscosity of the polymer melt ( ~ G):
0
0 expTT
B
kT
G
a
cL
TT
Ba
kT
G
a
cLa
expexpexp0
10
1
This temperature-dependence will contribute to the crystal growth velocity:
Recall that G depends on T and on L as:
fm
m aT
TLaHG 22 2
)(
Finally, recall that the fastest-growing lamellar size, L = L*, also depends on temperature as:
TH
T
c
aL
m
mf
)(2
*
We see that G(L*) becomes:
cT
TaHLG
m
3
*)(
![Page 30: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/30.jpg)
Temperature Dependence of Crystal Growth Velocity,
kT
LG
a
cL
TT
Ba
*)(*expexp
0
10
We can evaluate when L = L* and when G = G(L*):
We finally find that:
THa
Tc
TT
B
T
TH
c
a
ekT
a
m
mf
m
m)(2
expexp)( 0
310
Recall that T0 is approximately 50 K less than the glass transition temperature.
Describes molecular slowing-down as T decreases towards T0
Describes how the driving force for crystal growth is smaller with a lower amount of undercooling, T.
![Page 31: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/31.jpg)
Experimental Data on the Temperature Dependence of Crystal Growth Velocity
T-Tm (K)T-Tm (K) T-Tm (K)
Tm = crystal melting temperature
From Ross and Frolen, Methods of Exptl. Phys., Vol. 16B (1985) p. 363.
(c
m s
-1)
![Page 32: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/32.jpg)
Data in Support of Crystallisation Rate Equation
J.D. Hoffman et al., Journ. Res. Nat. Bur. Stand., vol. 79A, (1975), p. 671.
TTTT
B
m )(
1expexp~
0
V-F contribution: describes molecular slowing down with decreasing T
Undercooling contribution: considers greater driving force for crystal growth with decreasing T
ex
p (B
/(T-
T 0))
[cm
s-1
]1/(T(Tm()-T)) [10-4 K-2]
![Page 33: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/33.jpg)
Why Are Polymer Single Crystals (Extended Chains) Nearly Impossible to Achieve?
• Crystal with extended chains are favourable at very low levels of undercooling, as L* ~ 1/T
• But as temperatures approach Tm(), the crystal growth velocity is exceedingly slow!
T-Tm (K)
T-Tm (K)
T-Tm (K)
(c
m s
-1)
![Page 34: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/34.jpg)
Factors that Inhibit Polymer Crystallisation
1. Slow chain motion (associated with high viscosity) creates a kinetic barrier
2. “Built-in” chain disorder, e.g. tacticity
3. Chain branching
![Page 35: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/35.jpg)
Tacticity Builds in Disorder
Isotactic: identical repeat units
Syndiotactic: alternating repeat units
Atactic: No pattern in repeat units
Easiest to crystallise
Usually do not crystallise
R.A.L. Jones, Soft Condensed Matter (2004) O.U.P., p. 75
![Page 36: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/36.jpg)
Linear
Star-branched
Branched
Side-branched
Polymer Architecture
![Page 37: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/37.jpg)
Linear Poly(ethylene) Branched Poly(ethylene)
Effects on Branching on Crystallinity
Lamella are packed less tightly together when the chains are branched. There is a greater amorphous fraction and a lower overall density.
From U.W. Gedde, Polymer Physics (1995) Chapman & Hall, p. 148
![Page 38: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/38.jpg)
Determining Whether a Polymer Is (Semi)-Crystalline
Raman Spectra
“Fully” crystalline
Amorphous
Partially crystalline
From G. Strobl, The Physics of Polymers (1997) Springer, p. 154
![Page 39: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/39.jpg)
Xu et al., Nature Materials (2009) 8, 348.
Crystal Nucleation from “Seeds”
Original crystal
Re-crystallised from “seed crystals”
![Page 40: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/40.jpg)
Summary
Further Reading1. Gert Strobl (1997) The Physics of Polymers, Springer
2. Richard A.L. Jones (2004) Soft Condensed Matter, Oxford University Press
3. Ulf W. Gedde (1995) Polymer Physics, Chapman & Hall
• Polymer crystals have a hierarchical structure: aligned chains, lamella, spherulites.
• Melting point is inversely related to the crystal’s lamellar thickness.
• Lamellar thickness is inversely related to the amount of undercooling.
• The maximum crystal growth rate usually occurs at temperatures below the melting temperature (Tm) but above the glass transition temperature, Tg.
•Tacticity and chain branching prevents or interrupts polymer crystal growth.
![Page 41: Important Points from Last Lecture The Peclet number, Pe, describes the competition between particle disordering because of Brownian diffusion and particle.](https://reader036.fdocuments.in/reader036/viewer/2022062520/5697bf841a28abf838c86f09/html5/thumbnails/41.jpg)
Problem Set 5This table lists experimental values of the initial lamellar thickness for polyethylene crystallised at various temperatures. The equilibrium melting temperature was independently found to be 417.8 K.
(a) Are the data broadly consistent with the predictions of theory?
(b) Predict the melting temperature of crystals grown at a temperature of 400 K.
Temperature, T (K) Lamellar thickness, L (nm)358.95 8.9368.95 9.9385.75 12.0396.15 14.1397.55 16.1399.15 15.9400.85 17.3401.65 18.2403.05 17.9404.15 20.1405.55 22.2