IMPORTANT CHANGE

THE BUGGY HAS BEEN SLIGHTLY CHANGED SINCE THESE PHOTOGRAPHS WERE TAKEN

PLEASE SEE NEW FILE“BUGGY ASSEMBLY DIRECTIONS, AUGUST 2009”

FOR MINOR MODIFICATIONS MADE TO BUGGY AND CLEARER ASSEMBLY INSTRUCTIONS

Welcome to the solar cell buggy.

Before you explore the buggy, make sure you know

how it works…

The motor and drive mechanism

The croc clip switch (shown in the switch off position)

A capacitor is used to store energy

DC power socket

Storing energy. Energy from the lamp is transferred by the solar cell into the capacitor energy store.

Note that switch is off (croc clip disconnected)

Take care: don’t have the hot lamp too near the solar cell. Minimum distance is 10cm.

>10cm

The solar cell buggy with drive circuit complete. This buggy is rolling…

Switch closed. Energy is being transferred from the capacitor.