Media Technology 1- Term 1End of Term Worksheet

Question I Choose the correct answer.1. _______ is a special effect that is created by reducing the number of colors available for the image.

A. BlurB. PosterizeC. ReductionD. Compress

Look at the opposite figure then answer Questions 2-4:

2. The figure shows the setting for a _________ layer style.A. Outer glowB. Drop shadowC. Feathered edgeD. None of the above

3. The settings in the figure shown will create an effect with a ____ angle of light.

A. 60 degreesB. 50 degreesC. 30 degreesD. 70 degrees

4. In the figure above, the spread setting indicates _________.A. The size of the blur at the edge of the effectB. The lightning angle at which the effect is applied to the layerC. The offset distance for the shadow—how far it is away from the artworkD. The size of the shadow effect before the edge blurs

5. Which tool allows you to scroll around and view other areas of an image?

A. ViewB. ScrollC. ZoomD. Hand

6. ____ is a measurement of the number of pixels per square inch in an image.

A. PixelationB. ClarityC. ResolutionD. Draft

7. What function do the Magic Wand tool, the Lasso tool, and the Rectangular Marquee tool have in common?

A. FeatheringB. SelectingC. PastingD. Previewing

8. What is the standard color mode for documents that will be printed?

A. RGBB. CMYKC. HSBD. JPEG

9. What is an alpha channel?A. saved color swatchesB. a secondary workspaceC. a saved selectionD. saved Photoshop documents

10. The Crop Tool is used toA. Enlarge the imageB. Remove some areas from the imageC. Sharpen the image edgesD. None of the above

11. In the opposite figure, what effect has been applied to the left side of the "D" letter?

A. Inner Bevel ChiselB. Chiseled EmbossC. Smooth EmbossD. Feather Emboss

12. This tool is called _________A. moveB. lassoC. selectionD. Zoom

13. ____ moves an object clockwise or counterclockwise around its center point.

A. FlippingB. RotatingC. TurningD. Drifting

14. In the opposite figure, what kind of gradient is shown?A. shortened radialB. Linear across the canvasC. shortened linearD. radial

15. This tool is called _______A. moveB. lassoC. selectionD. zoom

16. Which of the following creates a mirror image of the artwork?A. Rotating

B. MatchingC. RepeatingD. Flipping

Look at the scenario below then answer questions 17 & 18A graphic designer (Salem) has been working on a poster for IAT, and he’s unhappy with the way it looks. For some reason, many of the images he has placed have rough edges, and he really wants everything to look crisp and clean.

17. Salem would use the ______ which is shown in the opposite figure for viewing and refining the edge of a selection.

A. Edge dialog boxB. Refine Edge dialog boxC. Edging Tools dialog boxD. Refining Tools dialog box

18. Because many of the edges in the poster have a rough and "stair-stepped" appearance, Salem guesses that they’re ____ edges.

A. anti-aliasedB. aliased

C. smoothedD. edited

Look at the figure below then answer Question 19

19. You can set size and hardness options for the Brush tool on the ____ bar.

A. OptionsB. ToolsC. BrushesD. Paint Tools

20. The quick key used to Access the Hand tool in Photoshop CS5 is _______.

A. [option]B. [Spacebar]C. D. [ - ]

21. Which of the following is an example of an image size?A. 153B. 42 MBC. 8" x 10"D. 300 ppi

22. Increasing the resolution of an image will ____________.A. Improve image qualityB. Reduce image qualityC. Not affect the image qualityD. None of the above

23. ___________ is a group of preset settings for controlling how color will appear on the monitor.

A. Color modeB. marqueeC. Color profileD. interpolation

24. The tool that is used to enlarge and reduce the view of a document is called the __________ tool.

A. ControlB. HandC. WindowD. Zoom

25. Which of the following visual effects would make the edge of an image gradually fades away?

A. vignetteB. Feathered edgeC. Refine edgeD. Anti-aliased edge

26. Which is the best tool to use in order to make selections for the given traffic sign?

A. Polygonal toolB. Magnetic toolC. Lasso toolD. Rectangular marquee tool

27. __________ is a powerful selection tool which selects other pixels based on tolerance.

A. Elliptical marquee toolB. Lasso toolC. Hand toolD. Magic wand tool

28. __________ is the process of selecting a layer in the layers panel isA. Cropping a layerB. Moving a layerC. Transforming a layerD. Targeting a layer

29. The fastest way to duplicate a layer is by using __________.

A. [K]

B. [M]

C. [J]

D. [D]

30. One of the most basic transformations used for resizing artworks is ____________.

A. LayersB. ScalingC. FlippingD. Rotating

31. The transformation applied on the image given below is ________.

A. MergingB. FlippingC. ScalingD. Rotating

32. Which of the following is true about a layer mask?A. Pixels in a layer mask are either black or white.B. A light gray layer mask means all the artwork on the layer is semitransparent.C. An all-black layer mask means all the artwork on the layer is visible.D. An all-white layer mask means all the artwork on the layer has 0% opacity.

33. ___________ is a set of preset color adjustment applied to layer style for a visual effect.

A. GradientB. Radial gradientC. Gloss contourD. Clipping

34. The layer style used in the given image is _____________.A. GradientB. Drop shadowC. clippingD. character

35. ___________ is a layer style that is used to create classic effects like raised text and chiseled text.

A. transparencyB. Linear gradientC. Radial gradientD. Bevel and Emboss

36. A gradient type which is applied from the start point to the end point in a straight line is called ______________.

A. Radial gradientB. Diamond gradientC. Linear gradientD. Angle gradient

37. Which mask would let us use one layer’s artwork as a mask for another layer’s artwork?

A. Clipping maskB. Layer maskC. Shape maskD. Vector mask

38. Which mode is used to specify access to the full range of colors?

A. GrayscaleB. BitmapC. RGBD. White

39. Which of the following is not a powerful adjustment for improving the overall appearance of an image?

A. LevelsB. GrayscaleC. ContrastD. Color Balance

40. Which of the following is not true for an RGB file?A. It has three-color channels.B. It is larger in file size than a gray scale version of the same file.C. Each pixel can be one of 256 shades of gray.D. The image can appear to be black-and white.

41. Which of the following graphic properties controls the transparency level (0 - 100%) of the pixels' color. Allowing you to see through the pixels to layers below?

A. Transparency C. Color ModeB. Opacity D. Visibility

42. Khalid downloaded a black and white image from the Internet. In his attempt to color all white clouds with a yellow color, a light gray color was applied instead. What could be the problem?

A. The image color mode is CMYKB. The Color panel needs to be reset, as the yellow color is not correctly visible.C. The image color mode is Grayscale; it needs to be set to RGB or CMYK in order to use colors.D. The opacity value is set to a very low number so the yellow is not visible.

43. Which of the following is an effect used to reduce the number of colors available for the image?

A. Hue B. PosterizeC. Contiguous D. Adjustments

44. What range of grayscale pixels will the Magic Wand select assuming that you have clicked on a pixel whose gray scale value is 75? Use the figure below as a guide.

A. pixels with gray scale that is in the range of 100-120B. pixels with gray scale that is in the range of 80-90C. pixels with gray scale that is in the range of 75-100D. pixels with gray scale that is in the range of 65-85

45. Which tool is used to select other pixels based on the similarity of colors?

A. Lasso B. Marquee C. Magic WandD. Polygonal Lasso

46. One of the uses of the SHIFT key in Photoshop is to add to selection. Which of the following is another use?

A. Remove from selection B. Concert to Vector‐based graphic C. Switch to a different toolD. Create perfect squares or circles

47. You have been working on a photo in Photoshop that has three white horses. If you need to select all the white horses using the right tool in a single click, which option you need to disable/unselect for that tool?

A. Tolerance=11 B. Add to selection C. ContiguousD. Tolerance=1

48. What would using black-to-white gradient on a layer mask result in?

A. Clipped mask B. Fading effect C. Emboss effectD. Layer style

49. Which of the following Character panel options specifies the overall spacing between letters in a given word or paragraph?

A. Leading B. Tracking C. Kerning D. Baseline shift

50. Which Menu command you should use to rasterize Type/Text in Photoshop?

A. File -> Rasterize -> B. Image ->Adjustment ->Posterize C. Layer ->Rasterize ->Type D. Layer ->Merge layers

51. What is the name of the color Gradient that blends from the starting point to the ending point in a circular pattern?

A. Radial B. Angle C. DiamondD. Linear

52. ______________ is a set of 12 preset adjustments that affect the brightness and contrast of a layer style to create dramatic lighting effects.

A. Gradient B. Gloss Contours C. Layer stylesD. Filters

53. Which of the following is a transform option used to create mirror image of the artwork, vertically or horizontally?

A. Gloss Contours B. Stroke C. FlippingE. Clipping

54. Which of the following is a Photoshop feature that creates a smooth transition between the edge and its background using many shades of the edge pixel color?

A. Anti-alias B. Transform C. Layer mask D. Transparency

55. Which keyboard shortcut is used to toggle layer mask between being active and inactive?

A. Shift + Click on layer mask thumbnail B. CMD + JC. Left click layers while holding CMDD. Press keyboard button X

56. What does the figure below represent?

A. A Chart B. Channels C. Color Balance D. Histogram

Question II Mark (T) for true and (F) for false statements:1) Pressing and holding [Shift] while dragging a marquee tool

constrains the marquee selection to a perfect circle or square.

2) When you merge two layers and then quit Photoshop, there will be no way to unmerge that artwork.

3) A stroke is a basic artistic element that places an outline on an object or on type.

4) The term "rasterize" means convert to mask5) The more layers in a file, the smaller the file size.6) Vector graphics are also called raster graphics.7) In Photoshop you can crop the image to a specific size8) The canvas is the bed of pixels in a Photoshop file.

9) 200 is considered a high resolution for any file that will be professionally printed.

10) You can flip images horizontally or vertically.

Question III In figure – 1 and figure – 2, Label each element with the suitable word from the List provided. Fill your answers in the table below each figure.

Tools panel Document tab Application Bar Expanded PanelA)

Number Word

1

2

3

4

B)Gradient ramp Last color stop The color of the

selected stopMiddle color stop Name of the gradient First color stop

Number Word

1

2

3

4

5

6

Question IV Using the following list, choose the most suitable action that gives the given results.

Merge Layers Applying Linear Gradient

Flip Canvas Horizontal

Quick Mask Mode Applying Radial Gradient

Create Clipping Mask

Case 1: ___________________

Before After

Case 2: ___________________

Before After

Case 3: ___________________

Before After

Case 4: ___________________

Before After

Case 5: ___________________

Before After