ICON HITCH™ - Dero Bike Racks | We know bike parking · Spice up bike parking without the expense...
Transcript of ICON HITCH™ - Dero Bike Racks | We know bike parking · Spice up bike parking without the expense...
© 2017 Dero
Custom racks at an off-the-shelf priceSpice up bike parking without the expense of a fully customized bike rack. Choose from eight designs: beer mug, bike, bird, coffee cup, silverware, maple leaf, music note, and wine glass. These frequently requested designs are now available as laser-cut plates, welded inside Dero’s popular Bike Hitch. Ideal for coffee shops, restaurants, brew pubs, nature centers, and anyone who wishes to make a statement with these eye-catching bike racks.
ICON HITCH™
www.dero.com | 1-888-337-6729
© 2017 Dero
ICON HITCH™
FINISH OPTIONS MOUNT OPTIONS
Surface
EIGHT DESIGNS TO CHOOSE FROM
Thermoplastic
Powder Coat
Black Light GrayRAL 7042
Deep RedRAL 3003
YellowRAL 1023
White
BlueRAL 5005
Sky BlueRAL 5015
Hunter GreenRAL 6005
CNH Bright Yellow OrangeRAL 2004
Light GreenRAL 6018
GreenRAL 6016
Sepia BrownRAL 8014
Bronze Silver9007
Dark Purple Flat Black Wine RedRAL 3005
BeigeRAL 1001
Iron Gray7011
Black Green Red GrayBlue Brown
© 2017 Dero
www.dero.com | 1-888-337-6729
35"
16.5"
2.375"
1.5"
CAPACITY 2 Bikes
MATERIALS Centerbeam: 2” schedule 40 pipe (2.375” OD)Ring: 1.5” OD 11 gauge tubeIcon plate: .25” laser cut steel
FINISHES Powder CoatOur powder coat finish assures a high level of adhesion and durability by following these steps:1. Sandblast2. Epoxy primer electrostatically applied3. Final thick TGIC polyester powder coat
MOUNT OPTIONS
SurfaceFoot Mount has a 5”x6”x.25” foot with four anchors per foot.
ICON Beer
Bike
Bird
Coffee
Maple
Music
Silverware
Wine
ICON HITCH™
Submittal Sheet
© 2017 Dero
www.dero.com | 1-888-337-6729
ICON HITCH™
Setbacks
STREET
STREET
WALL WALL
54"
76"36"24"
(38” if no aisleis needed)
Place the rack in the desired location. Use a marker or pencil to outline the holes of the flange onto the base material.
1
3 4
2
RECOMMENDED BASE MATERIAL
Solid concrete is the best base material for installation. To ensure the proper anchors are shipped with your rack, ask your Dero Rack representative which anchor is appropriate for your application. Be sure nothing is underneath the base material that could be damaged by drilling.
www.dero.com | 1-888-337-6729
© 2017 Dero
Thread nuts onto anchors, leaving approximately 1/4” of the anchor protruding, and tap into surface. Tighten nuts down to secure rack.
Place rack (and washers to level rack if necessary) over holes.
Drill 3/8” diameter holes 3” deep into surface. Make sure the holes are at least 3” away from any cracks in the base material.
TOOLS NEEDED
Tape MeasureMarker or PencilMasonry Drill BitDrill (Hammer drill recommended)HammerWrench 9/16”LevelWashers (for leveling if necessary)
ICON HITCH™
Installation Instructions – Surface Mount