i cocci - catalogue.nationaltiles.com.au · Floor: i Cocci Grafite Spaccatto Inspired by...
Transcript of i cocci - catalogue.nationaltiles.com.au · Floor: i Cocci Grafite Spaccatto Inspired by...
Floor: i Cocci Grafite Spaccatto
Inspired by traditional Italian flooring of the early 20th Century, the porcelain I COCCI series emulates fragments,flecks and flakes of marble and other recycled material bound by cement.
i cocci
Floor: i Cocci Cemento
Material: Glazed colour body porcelain
Edge: Rectified
Surface finish: Natural
Application: Floor and Wall
Nominal sizes: 600x600mm and 300x300mm
Shade variation: V3V4 on Spaccatto Decor
Slip resistance Wet pendulum test: P4Oil-wet including platform test: R10
Made in Italy
Exclusive to National Tiles
Lifetime Warranty
Product Specifications
stocked
Calce600x600mm
Calce Spaccatto300x300mm
Cenere Spaccatto300x300mm
Cemento600x600mm
Floor and Wall: i Cocci Calce Spaccatto
Grafite600x600mm
Cenere600x600mm
Grafite Spaccatto300x300mm
Cemento Spaccatto300x300mm
special order
Hydro Exa Calce300x300mm
Palladiana Calce300x300mm
Hydro Exa Cemento300x300mm
Palladiana Cemento300x300mm
Wall: i Cocci Palladiana Calce Mosaic
minimum order. lead times apply
Hydro Exa Graphite300x300mm
Palladiana Graphite300x300mm
Palladiana Cenere300x300mm
Hydro Exa Cenere300x300mm
tech specs
Technical Feature Test Method Required Minimum Standards i Cocci
Sizes and Look of the tile ISO 10545-2 Length and width ±0.6% /±2.0 mmThickness ±5%/±0.5 mmStraightness of sides ±0.5%/±1.5 mmRectangularity ±0.5%/±2.0 mmSurface flatness ±0.5%/±2.0 mmSurface quality:95% of tiles with no defaults
CompliantCompliantCompliantCompliantCompliant
Water Absorption ISO 10545-3 ≤ 0.5 % 0.06 %(average values referred to the last production)
Average Bending Strength ISO 10545-4 35 N/mm2 min. 38.9 N/mm2
(average values referred to the last production)
Breaking Strength ISO 10545-4 Thickness ≥ 7.5 mm: 1300 N min. Compliant
Resistance to Surface Abrasion ISO 10545-7 State the PEI rate and covered cycles Calce:Class 4 (6000 rotations)
Cenere/Cemento/Grafite:Class 4 (2100 rotations)
Crazing Resistance ISO 1045-11 Required Compliant
Frost Resistance ISO 1045-12 Required Compliant
Chemical Resistance(Acid and Alkali Low Concentration)
ISO 1045-13 According to the classification stated by the manufacturer
GLA Class
Chemical Resistance(Domestic use and swimming pool chemicals)
ISO 1045-13 Min. GB Compliant
Stain Resistance ISO 1045-14 Min. Class 3 Class 5
Coefficient of Friction B.C.R.A. METHOD(D.M. no. 236 of 14/06/1989 of Italian Republic)
DRY: > 0.40WET: > 0.40
Antislip Properties DIN 51130 R10
Dynamic Coeffecient of Friction DCOF ANSI A137-1:2012
Wet: 0.62
Pendulum Tester StandardsBS 7976-2:2002
Dry: 57Wet: 42