HYPAK SERIES HYPAK - HP3 HYPAK - HP4 - Acuity · PDF fileHypak - a series of high performance...
20
AREA LIGHTING HYPAK SERIES HYPAK - HP3 HYPAK - HP4
Transcript of HYPAK SERIES HYPAK - HP3 HYPAK - HP4 - Acuity · PDF fileHypak - a series of high performance...
AREA LIGHTING
HYPAK SERIES
HYPAK - HP3HYPAK - HP4
Hypak - a series of high performance building mounted luminaires providing maximum versatility.
Innovative optical design, low profi le fi xtures, and practical mechani-cal layout make Hypak a complete lighting system easy to specify, install, and maintain. Hypak’s low profi le design and soft light are ideal for area lighting applications where control and visual comfort are important.
Hypak Area Lights - HP3 and HP4
1
2
The HP3 Series – a versatile complement to the larger HP4 luminaires.
These units, offering eight unique light distributions, may be wall or ceiling mounted. Low level uses include illumination of stairways, pedestrian areas, entrances, ramps, and driveways. At higher levels, the HP3 is used to illuminate industrial work spaces, aisles, and garages.
The HP3 Series is a compact, low glare, high performance luminaire for HID lamps to 150 Watts. Any one of eight light distributions within a single housing are created by com-bining one of two lenses and a
choice of three refl ectors. Symmetrical and asymmetrical distributions are available. The refl ector and lens design provide excellent cutoff glare control and photometric performance. The result is visual comfort and performance found with a lower number of fi xtures.
3
4
Compact, one-piece lens door made of tough molded Lexan® polycarbonate.
High power factor ballasts mount-ed to housing for maximum heat dissipation, long life, and reliable lamp starting.
Pulse rated porcelain sockets for medium base (or E-27) HID lamps to 150 Watts.
High-performance refl ectors provide four different wall mount distributions. Extruded aluminum refl ectors are Alzak® treated for long-term, uniform lighting.
Shallow and compact, durable, heat-dissipating one-piece die cast aluminum housing.
Fresnel linear spread lens for uniform light distribution.
Durable stainless steel fasteners are easily removed for fi xture access.
Easy surface or recessed installation. Integrally cast knockouts provided for rear 4-0 box entry or independent mounting.
Housing will be pre-shipped with RDE & RSB mountings.
Long lasting silicon gaskets completely seal the fi xture to protect against water and bugs.
Quick disconnects included for easy refl ector installation or removal.
Optional direct conduit entry for easy, straight-through
wiring.
High power factor ballasts mount-ed to housing for maximum heat dissipation, long life, and reliable lamp starting.
Pulse-rated porcelain sockets for medium base (or E-27) HID lamps to 150 Watts.
High-performance refl ectors provide three different ceiling mount distributions. Hydroform aluminum refl ectors are Alzak® treated for long- term, uniform lighting.
Durable, heat-dissipating one-piece die cast aluminum housing is shallow and compact.
Fresnel spread lens for uniform light distribution.
Durable stainless steel fasteners are easily removed for fi xture access.
Easy surface or recessed installation. Integrally cast knockouts provided for rear 4-0 box entry or independent mounting.
Long lasting Silicon gaskets completely seal the fi xture to protect against water and bugs.
Quick disconnects included for easy refl ector installation / removal.
Optional direct conduit entry for easy, straight-through wiring.
U.L. LISTEDFOR WET LOCATIONS
C.S.A. LISTED
SPECIFICATIONS - HP3
WALL MOUNT
CEILING MOUNT
5
APPLICATION GUIDELINES - HP3
32’
LHW: LOW HORIZONTAL WALL DISTRIBUTION
33’
HFW: HIGH FORWARD WALL DISTRIBUTION
LEVEL 1MEDIUM LIGHT LEVELPublic access area with some protection, unfenced. Moderate light required for visibility and security.Recommended light level - 0.5 FC MIN
LEVEL 2HIGH LIGHT LEVELHigh public access area with no protection. Lighting required for good visibility and security.Recommended light level - 1 FC MIN
LEVEL 3VERY HIGH LIGHT LEVELWhere maximum light level is required for highest visibility and security and/or accenting for sales impact.Recommended light level - 5 FC MIN
30’ 18’
27’ 17’
100M HFW @ 10’ (0.5 FC MIN) 100M HFW @ 10’ (1 FC MIN) 100M HFW @ 10’ (5 FC MIN)
100M LHW @ 3’ (0.5 FC MIN) 100M LHW @ 3’ (1 FC MIN) 100M LHW @ 3’ (5 FC MIN)
WALL MOUNT
IES FILE: ITL33160
IES FILE: ITL33869
* HORIZONTAL FC LEVELS ARE BASED ON 0% WALL REFLECTANCE.* PLEASE VISIT WWW.HYDREL.COM TO DOWNLOAD DETAILED PERFORMANCE DATA IN IES FORMAT.* RECOMMENDED LIGHT LEVELS FOR USE AS APPLICATION GUIDELINES ONLY, ACTUAL APPLICATIONS MAY REQUIRE DIFFERENT LEVELS.
HORIZONTAL ILLUMINANCE RECOMMENDATIONS IN FOOTCANDLES (FC)
66
LFW: LOW FORWARD WALL DISTRIBUTION
APPLICATION GUIDELINES - HP3
LLW: LOW LEFT WALL DISTRIBUTION
LRW: LOW RIGHT WALL DISTRIBUTION
20’ 17’ 12’
100M LLW/LRW @ 2’ (0.5 FC MIN) 100M LLW/LRW @ 2’ (1 FC MIN) 100M LLW/LRW @ 2’ (5 FC MIN)
100M LFW @ 3’ (0.5 FC MIN) 100M LFW @ 3’ (1 FC MIN) 100M LFW @ 3’ (5 FC MIN)
WALL MOUNT
IES FILE: ITL33163
IES FILE: ITL33870
* HORIZONTAL FC LEVELS ARE BASED ON 0% WALL REFLECTANCE.* PLEASE VISIT WWW.HYDREL.COM TO DOWNLOAD DETAILED PERFORMANCE DATA IN IES FORMAT.* RECOMMENDED LIGHT LEVELS FOR USE AS APPLICATION GUIDELINES ONLY, ACTUAL APPLICATIONS MAY REQUIRE DIFFERENT LEVELS.
7
APPLICATION GUIDELINES - HP3
24’
HSC: HIGH SYMMETRICAL DISTRIBUTION
22’
HNC: HIGH NARROW DISTRIBUTION
22’
HAC: HIGH ASYMMETRICAL DISTRIBUTION
21’ 12’
18’ 9’
18’ 10’
100M HAC @ 10’ (0.5 FC MIN) 100M HAC @ 10’ (1 FC MIN) 100M HAC @ 10’ (5 FC MIN)
100M HNC @ 10’ (0.5 FC MIN) 100M HNC @ 10’ (1 FC MIN) 100M HNC @ 10’ (5 FC MIN)
100M HSC @ 10’ (0.5 FC MIN) 100M HSC @ 10’ (1 FC MIN) 100M HSC @ 10’ (5 FC MIN)
CEILING MOUNT
IES FILE: ITL33168
IES FILE: ITL33171
IES FILE: ITL33172
* PLEASE VISIT WWW.HYDREL.COM TO DOWNLOAD DETAILED PERFORMANCE DATA IN IES FORMAT.* RECOMMENDED LIGHT LEVELS FOR USE AS APPLICATION GUIDELINES ONLY, ACTUAL APPLICATIONS MAY REQUIRE DIFFERENT LEVELS.
11 3/8”
12 3/8”
Recessed 4-0 box (by others)
2 1/4”
7”
Two (2) 1/4” mounting holes for wall
anchor bolts (bolts by others)
Cast knockouts for
4-0 box mounting
12 3/8”
12 7/8”
11 3/8”
5 7/8”
9”
6 1/4”
1”
SDE: Two (2) 1/2”
NPS side direct
conduit entries
SSB: Two (2) 3/4”
NPS side direct
conduit entries in
splice box
7”
Two (2) 1/4” mounting holes for wall
fasteners (fasteners by others)
2 1/4”
8” Min.
RDE: Two (2) 1/2”
NPS side direct
conduit entries
RSB: Two (2) 3/4”
NPS side direct
conduit entries in
splice box
10 5/8”
5 11/16”
11 5/8”
6 3/16”
Housing is held to front form with #10-24
fasteners threaded into housing.
(fasteners by others)12 3/8”
12 7/8”
11 3/8”
9“
6 1/4”
5 5/8”
Four (4) set screws
secure fixture to
supplied mounting
18”
5 5/8”
12 7/8”
12 3/8”
11 3/8”
12 7/8”
Recessed4-0 box (by others)
SURFACE, DIRECT ENTRY Applications for direct conduit entry. Two (2) 1/2” NPS openings standard.
SDE
SURFACE WITH SPLICE BOX Cast aluminum splice box included. 3/4” NPS openings standard.
SSB
RECESSED WITH SPLICE BOX
Cast aluminum splice box included. 3/4” NPS side or bottom openings available.
RSB
RECESSED, DIRECT ENTRY
Applications for direct conduit connections. Two (2) 1/2” NPS open-ings standard.
RDE
BASE, TANDEM
Twin base mounting over recessed junction box (by others).
BMT
BASE, SINGLE
Base mounting over re-cessed junction box (by others). Mounting plate provided.
BMS
SURFACE Surface mounting over recessed junction box (by others). Knockout mounting holes provided.
SNB
MOUNTINGS - HP3
SNB - FRONT SNB - SIDE SNB - BACK
8
SDE/SSB - FRONT SDE/SSB - SIDE SDE/SSB - BACK
RDE/RSB - FRONT RDE/RSB - SIDE RDE/RSB - BACK
BMS - FRONT BMS - SIDE BMT - TANDEM
9
12 7/8”
11 3/8”
12 3/8”
Recessed
4-0 box
(by others)
6 1/4”
9”
5 5/8”
Four (4) set screws
secure fixture to
supplied mounting
18”
5 5/8”
12 7/8”
12 3/8”
11 3/8”
3 3/8”
9”
6 1/4”
14 3/4”
18”
15 1/2”
4 1/8”
POLE, SINGLE Pole mounting on 2 3/8” dia. x 4” long tenon (by others) slip fi tter secures with supplied fastener bolts.
POLE, TANDEM
Twin Pole mounting on 2 3/8” dia. x 4” long tenon (by others) slip fi tter secures with supplied fastener bolts.
PENDANT, SINGLE
Top pendant mounting below recessed junction box (by others). Set screws secure fi xture to supplied mounting.
PENDANT, TANDEM Twin pendant mounting below recessed junction box (by others). Set screws secure fi xture to supplied mounting.
PMS
PMT
SPM
TPM
MOUNTINGS - HP3
PLASTER FRAME WITH SPLICE BOX
Recessed in dry walls or ceilings. Knockouts available for Junction box (by others).
PLASTER FRAME FOR DIRECT ENTRY
Applications for direct conduit connections. Recessed in dry walls or ceilings. Two (2) 1/2” NPS openings standard.
PFD
PFS
12 3/8”
11 3/8”
PFS: Cast knockouts for 4-0 box mounting (4-0 box by others)
PFD: Two 1/2” NPS side direct conduit entries
5/8”
11 3/4”
12 3/4”
Eight (8) 1/4” dia. holes forattaching to dry wall plaster frame
Cast knockouts for
4-0 box mounting
SURFACE (CEILING)Mountings are Stan-dard in Ceiling mounted versions when order-ing HSC, HNC and HAC distributions.
SNB12 3/8”
11 3/8”
9”
6 1/4”
Recessed 4-0 Box(by others)
9”
6 1/4”1 11/16”
Two 1/2” NPS side
direct conduit entries
RSB: Two (2) 3/4”
NPS side direct
conduit entries in
splice box
SPM - FRONT SPM - SIDE TPM - TANDEM
PMS - FRONT PMS - SIDE PMT - TANDEM
SNB/SDE/SSB - BOTTOM SNB - SIDE SDE/SSB - SIDE
PFD/PFS - FRONT PFD/PFS - SIDE PFD/PFS - BACK
SDESSB
The HP4 Series – high performance building mountedluminaires provide maximum versatility.
10
11
Innovative optical design, low profi le fi xtures and practical mechanical layout make HP4 lighting systems easy to specify, install, and maintain. HP4 low profi le design and soft light are ideal for area lighting applica-tion where control and visual comfort are important. Common applications include building security, pedestrian areas, industrial work areas, garage, and parking areas.
This wall mounted luminaire provides uniform light for large areas with excellent glare control to minimize intrusion.
The Hypak HP4 is a versatile high performance sharp vertical cutoff lumi-naire capable of meeting all the needs of high level area lighting. The unit can be surface-mounted, recessed, pole, post, pendant, and base mounted to allow for maximum versatility. To insure long maintenance-free service, Hydrel uses a single die cast aluminum housing and a vandal resistant poly-carbonate projecting lens. All hardware is stainless steel. Silicone gaskets assure weather and bug tight seals.
Door rod holds door in open position for easier lamp replacement
and maintenance.
Easy access, quarter turn fasteners quickly releases refl ector assembly.
Refl ector assembly is counterbalanced to provide easy ac-cess to ballast wiring area for installation and maintenance.
1212
One piece Lexan® hinged lens door is impact and vandal resistant. Stainless steel hinges provide easy door removal for fi xtureaccess.
Long lasting silicone gas-kets provide protection against water and bugs.
High performance refl ector is adjustable through sharp cutoff
range of 70° to 85°. Unique three piece extruded aluminum
refl ector construction. Alzak treated aluminum for long term
optical performance.
Housing is durable, heat dissipating one piece die-cast aluminum.
Fresnel linear spread lens of U.V. stabilized clear polycarbonate lens.
Durable stainless steel fasteners are easily re-moved for fi xture access.
Heavy-duty poly-ester powder coat fi nish for long-term fi xture performance.
Housing will be pre-shipped with RSB mounting.
Internal aiming scale is used for easy, accurate cut-off adjustment.
Quick disconnects are included for easy removal or installa-tion of the refl ector assembly.
Pulse-rated porcelain lamp sockets accept HID lamps to 250 Watts.
High power factor ballasts are mounted directly to the hous-ing for maximum heat dissipation, long life and reliable lamp starting.
Integral cast knockouts provided for rear 4-0 box entry or independent mounting.
U.L. LISTEDFOR WET LOCATIONS
C.S.A. LISTED
SPECIFICATIONS - HP4
WALL MOUNT
13
APPLICATION GUIDELINES - HP4
51’ 44’ 24’
51’ 44’ 24’
53’ 45’ 24’
HP4 175M @ 70° REFLECTOR ANGLE
HP4 175M @ 76° REFLECTOR ANGLE
HP4 175M @ 85° REFLECTOR ANGLE
WALL MOUNT
LEVEL 1MEDIUM LIGHT LEVELPublic access area with some protection, unfenced. Moderate light required for visibility and security.Recommended light level - 0.5 FC MIN
LEVEL 2HIGH LIGHT LEVELHigh public access area with no protection. Lighting required for good visibility and security.Recommended light level - 1 FC MIN
LEVEL 3VERY HIGH LIGHT LEVELWhere maximum light level is required for highest visibility and security and/or accenting for sales impact.Recommended light level - 5 FC MIN
IES FILE: ITL31755
IES FILE: ITL31756
IES FILE: ITL31757
HORIZONTAL ILLUMINANCE RECOMMENDATIONS IN FOOTCANDLES (FC)
* HORIZONTAL FC LEVELS ARE BASED ON 0% WALL REFLECTANCE.* PLEASE VISIT WWW.HYDREL.COM TO DOWNLOAD DETAILED PERFORMANCE DATA IN IES FORMAT.* RECOMMENDED LIGHT LEVELS FOR USE AS APPLICATION GUIDELINES ONLY, ACTUAL APPLICATIONS MAY REQUIRE DIFFERENT LEVELS.
SURFACE WITH SPLICE BOX
For applications where conduit is run on surface. Cast aluminum splice box included. 3/4” NPS openings standard.
SSB
RECESSED WITH SPLICE BOX (Concrete Installation)For applications where unit needs to be recessed in concrete. Cast aluminum splice box included. 3/4” NPS openings standard. Housing back box canbe pre-installed.
RSB
SURFACE Surface mounting over recessed junction box (by others). Knockout mounting holes provided.
SNB
MOUNTINGS - HP4
15 5/8”
16 3/8”11 3/8”
6 7/8”
Recessed
4-0 box
(by others)Cast knockouts for
4-0 box mountings
12”
3 5/8”
Four (4) 1/4” mounting
holes for wall anchor bolts
(bolts by others)
14
16 3/8”
17 7/16”
15 5/8”
5 7/8”
11 3/8”
6 7/8”
Two (2) 3/4” NPS side
conduit entries in splice box.
12”
3 5/8”
Four (4) 1/4” mounting
holes for wall anchor bolts
(bolts by others)
16 3/8”
17 7/16”
15 5/8”
8 1/2” min.
Two (2) 3/4” NPS side
conduit entries in splice box.
4 13/16”
13 5/8”
Housing is held to front form with
#10-24 fasteners threaded into
housing. (fasteners by others)
SNB - FRONT SNB - SIDE SNB - BACK
SSB - FRONT SSB - SIDE SSB - BACK
RSB - FRONT RSB - SIDE RSB - BACK
MOUNTINGS - HP4
15
POLE, TANDEM
Twin pole mounting on 2 3/8” dia. x 4” long tenon (by others). Slip fi tter secured with supplied fastener bolts.
PMT
POLE, SINGLE
Pole mounting on 2 3/8” dia. x 4” long tenon (by others). Slip fi tter secured with supplied fastener bolts.
PMS
PENDANT, TANDEM
Twin pendant mounting below recessed junction box (by others). Mount-ing plate provided.
TPM
PENDANT, SINGLE
Top pendant mounting below recessed junction box (by others). Mount-ing plate provided.
SPM
BASE MOUNT, TANDEM
Twin base mounting over recessed 4-0 box (by others). Mounting plate provided.
BMT
BASE MOUNT, SINGLE
Base mounting over recessed junction box (by others). Mounting plate provided.
BMS
5 15/16”
16 3/8”
17 7/16”
15 5/8”
Recessed
4-0 box
(by others)
11 3/8”
6 7/8”
5 1/2”
Four (4) set screws
secure fixture to
supplied mounting
22 3/4”
17 5/8”
5 1/2”
17 1/16”
15 5/8”
16 3/8”
5 15/16” Recessed
4-0 box
(by others)
6 7/8”
11 3/8”
5 1/2”
Four (4) set screws
secure fixture to
supplied mounting
22 3/4”
5 1/2”
17 5/8”
16 3/8”
15 5/8”
3 3/8”
11 3/8”
6 7/8”
19”
22 3/4”
19 3/4”
4 1/8”
BMS - FRONT BMS - SIDE BMT - TANDEM
SPM - FRONT SPM - SIDE TPM - TANDEM
PMS - FRONT PMS - SIDE PMT - TANDEM
HP3 150M 120 HFW SDE SF BL
1616
EXAMPLE:
ORDERING GUIDE - HP3
HP3
Model
INCANDESCENT:116I A21, med. baseHID:50S E17, med. base70S E17, med. base100S E17, med. base150S1 E17, med. base50M E17, med. base70M E17, med. base100M E17, med. base150M1 E17, med. base100H B17, med. base
Lamps
120208220240277347120/277TB TBV
Voltage Distribution
HFW High Forward WallLHW Low Horizontal WallLFW Low Forward WallLLW Low Left WallLRW Low Right WallHSC High Symmetrical CeilingHNC High Narrow CeilingHAC High Asymmetrical Ceiling
BMS Base mount, singleBMT2 Base mount, tandemPFD Plaster frame, direct entryPFS Plaster frame, splice boxPMS Pole, singlePTM2 Pole, tandemRDE Recessed, direct entryRSB Recessed, splice boxSDE Surface, direct entrySNB Surface, no boxSPM Pendant, singleSSB Surface, splice boxTPM2 Pendant, tandem
Mounting Options
SF3 Singe FuseDF4 Double FusePER1,5 Photo Control ReceptableQRS Quartz Emergency Restrike
Lamp
LPI Lamp Included
BL BlackBZ BronzeDDB Dark BronzeDNA Natural Alum.GN GreenGR GraySND SandSTG Steel Gray TVG Terra Verde GreenWH WhiteCF Custom Finish
Finish
LPI
Notes:1 Not available with RSB and RDE. 2 Includes two fi xtures and one mounting.3 SF is only available with 120, 277 or 347 Volt, HID only.4 DF is only available with 208, 220 or 240 Volt, HID only.5 NEMA twist-lock receptacle only. Photo control by others.
WH DNAT STG BLDDBGNGR SND TVG BZ
HP3 Wall Mounted
17
ORDERING GUIDE - HP4
Notes:1 Not available with RSB mounting. 2 Will be used in place of standard lens.
3 175 Watt maximum, refl ector is not adjustable with this lens.4 150 Watt maximum, refl ector is not adjustable with this lens.5 Includes two fi xtures and one mounting.6 SF is only available with 120, 277 or 347 volts on HID only.7 DF is only available with 208, 220 or 240 volts on HID only.8 NEMA twist-lock receptacle only. Photo control by others.
HP4 250M 120 SNB SF BLEXAMPLE:
HP4
Product FinishMounting
BMS Base Mount, SingleBMT5 Base Mount, TandemPMS Pole Mount, SinglePTM5 Pole Tandem, MountRSB Recessed with Splice BoxSNB Surface, No BoxSPM Single Pendant MountTPM5 Tandem Pendant MountSSB Surface with Splice Box
Lamp
SF6 Single FuseDF7 Double FusePER1,8 Photo Cell ReceptacleQRS Quartz Re-Strike
FLG3 Flat Lens Tempered GlassFLP4 Flat Lens Polycarbonate
120208220240277347480120/277TBTBV
HID:100S ED23 ½ Mogul150S ED23 ½ Mogul250S1 ED28 Mogul175M ED28 Mogul200M1 ED28 Mogul250M1 ED28 Mogul250H1 ED28 Mogul
Lamp Type Voltage Optional Lenses2 Option
LPI Lamp Included
LPI
BL BlackBZ BronzeDDB Dark BronzeDNA Natural Alum.GN GreenGR GraySND SandSTG Steel Gray TVG Terra Verde GreenWH WhiteCF Custom Finish
WH DNAT STG BLDDBGNGR SND TVG BZ
12881 Bradley Avenue, Sylmar, CA 91342T 818.362.9465 F 818.362.6548Email: [email protected]
©2004 Acuity Brands, Inc. All rights reserved. “Hydrel” is a trademark of Acuity Brands, Inc.
Form
No.
106
.15
11/0
4
