HYGIENISK AU · 2018. 7. 6. · person must install this appliance. • Remove all the packaging....

HYGIENISKAU

ENGLISHPlease refer to the chapter IKEA GUARANTEE for contact details ofthe after sales customer service centre.

ENGLISH 4

ContentsSafety information 4Safety instructions 6Product description 7Control panel 8Before first use 9Programmes 10Options 12Settings 12

Daily use 15Hints and tips 17Care and cleaning 18Troubleshooting 20Technical information 23Environmental concerns 24IKEA guarantee 24

Subject to change without notice.

Safety information

Before the installation and use of the appliance, carefully readthe supplied instructions. The manufacturer is not responsiblefor any injuries or damages that are the result of incorrectinstallation or usage. Always keep the instructions in a safe andaccessible location for future reference.

Children and vulnerable people safety• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory ormental capabilities or lack of experience and knowledge ifthey have been given supervision or instruction concerningthe use of the appliance in a safe way and understand thehazards involved.

• Children between 3 and 8 years of age and persons withvery extensive and complex disabilities shall be kept awayunless continuously supervised.

• Children of less than 3 years of age should be kept awayunless continuously supervised.

• Do not let children play with the appliance.• Keep detergents away from children.• Keep children and pets away from the appliance when the

door is open.

ENGLISH 4

• Children shall not carry out cleaning and user maintenance ofthe appliance without supervision.

General Safety• This appliance is intended to be used in household and

similar applications such as:– farm houses; staff kitchen areas in shops, offices and other

working environments;– by clients in hotels, motels, bed & breakfast and other

residential type environments.• Do not change the specification of this appliance.• The operating water pressure (minimum and maximum) must

be between 0.5 (0.05) / 8 (0.8) bar (MPa)• Obey the maximum number of 15 place settings.• If the supply cord is damaged, it must be replaced by the

manufacturer, its Authorised Service Centre or similarlyqualified persons in order to avoid a hazard.

• Put the cutlery in the cutlery basket with the sharp endspointing down or put them in the cutlery drawer in ahorizontal position with the sharp edges down.

• Do not leave the appliance with the open door unattended toavoid stepping accidentally onto it.

• Before any maintenance operation, deactivate the applianceand disconnect the mains plug from the socket.

• Do not use high pressure water sprays and/or steam to cleanthe appliance.

• If the appliance has ventilation openings in the base, theymust not be covered e.g. by a carpet.

• The appliance is to be connected to the water mains usingthe new supplied hose-sets. Old hose sets must not bereused.

ENGLISH 5

Safety instructions

Installation

Warning! Only a qualifiedperson must install thisappliance.

• Remove all the packaging.• Do not install or use a damaged

appliance.• Do not install or use the appliance where

the temperature is less than 0 °C.• Follow the installation instructions

supplied with the appliance.• Always take care when moving the

appliance as it is heavy. Always usesafety gloves and enclosed footwear.

• Make sure that the appliance is installedbelow and adjacent to safe structures.

Electrical connection

Warning! Risk of fire and electricshock.

• The appliance must be earthed.• Make sure that the parameters on the

rating plate are compatible with theelectrical ratings of the mains powersupply.

• Always use a correctly installedshockproof socket.

• Do not use multi-plug adapters andextension cables.

• Make sure not to cause damage to themains plug and to the mains cable.Should the mains cable need to bereplaced, this must be carried out by ourAuthorised Service Centre.

• Connect the mains plug to the mainssocket only at the end of the installation.Make sure that there is access to themains plug after the installation.

• Do not pull the mains cable to disconnectthe appliance. Always pull the mainsplug.

• This appliance complies with the E.E.C.Directives.

• UK and Ireland only. This appliance isfitted with a 13 A mains plug. If it isnecessary to change the mains plug fuse,use only a 13 A ASTA (BS 1362) fuse.

Water connection• Do not cause damage to the water

hoses.• Before connection to new pipes, pipes

not used for a long time, where repairwork has been carried out or newdevices fitted (water meters, etc.), let thewater flow until it is clean and clear.

• Ensure that there are no visible waterleaks during and after the first use of theappliance.

• The water inlet hose has a safety valveand a sheath with an inner mains cable.

Warning! Dangerous voltage.• If the water inlet hose is damaged,

immediately close the water tap anddisconnect the mains plug from the mainssocket. Contact the Authorised ServiceCentre to replace the water inlet hose.

Use• Do not sit or stand on the open door.• Dishwasher detergents are dangerous.

Obey the safety instructions on thedetergent packaging.

• Do not drink and play with the water inthe appliance.

ENGLISH 6

• Do not remove the dishes from theappliance until the programme iscomplete. Some detergent may remainon the dishes.

• The appliance can release hot steam ifyou open the door while a programmeoperates.

• Do not put flammable products or itemsthat are wet with flammable products in,near or on the appliance.

Internal lighting

Warning! Risk of injury.

• This appliance has an internal lamp thatcomes on when you open the door andgoes off when the door is closed.

• The type of lamp used for this applianceis for household appliances only. Do notuse it for house lighting.

• To replace the internal lighting, contactthe Authorised Service Centre.

Service• To repair the appliance contact an

Authorised Service Centre.• Use original spare parts only.

Disposal

Warning! Risk of injury orsuffocation.

• Disconnect the appliance from the mainssupply.

• Cut off the mains cable and discard it.• Remove the door catch to prevent

children and pets to get closed in theappliance.

Product description

5 4 9 8 6

10

11

2 31

7

1 Top spray arm2 Upper spray arm

3 Lower spray arm4 Filters

ENGLISH 7

5 Rating plate6 Air vent7 Rinse aid dispenser8 Detergent dispenser

9 Lower basket10 Upper basket11 Cutlery drawer

TimeBeamTimeBeam displays the followinginformation on the floor below theappliance door:• The programme duration when the

programme begins.• 0:00 and CLEAN when the programme

is completed.• DELAY and the countdown duration

when the delay start begins.• An alarm code when the appliance has

a malfunction.

When AutoOpen is activatedduring the drying phase, theprojection on the floor may notbe completely visible. To checkthe remaining time of the runningprogramme, look at the controlpanel display.

Control panel

1 2 3 4 5 6 7 8 9

1 On/off button2 Display3 Delay button4 Programme button (up)

5 Programme button (down)6 ExtraHygiene button7 DryPlus button8 RESET button

ENGLISH 8

9 Indicators

Indicators

Indicator DescriptionEnd indicator.

Rinse aid indicator. It is always off while the programme operates.

Door indicator. It comes on when the appliance door is open or is not cor-rectly closed.

Before first use

Caution! Remove the protectionfilm from the control panel.

1. Fill the rinse aid dispenser.2. Open the water tap.3. Start the programme (P3) to remove

any residuals from the manufacturingprocess. Do not use detergent and donot put dishes in the baskets.

Filling the rinse aid dispenser

1 2

3

A

Fill the rinse aiddispenser until therinse aid reachesthe marking "MAX".Remove the spilledrinse aid with anabsorbent cloth toprevent too muchfoam.Fill the rinse aiddispenser when theindicator (A)becomes clear andthe rinse aidindicator on thecontrol panel is on.

4

ENGLISH 9

Programmes

Once you switch the appliance on, thedisplay shows the programme number P4by default.

Use and to change theprogramme selection.

Programme Degree of soilType of load

Programme phases Options

P1 1)

• All• Crockery, cutlery,

pots and pans

• Prewash• Wash from 45 °C to 70

°C• Rinse• Dry

• ExtraHygiene• DryPlus

P2 • Heavy soil• Crockery, cutlery,

pots and pans

• Prewash• Wash 70 °C• Rinse• Dry


P3 2)

• Fresh soil• Crockery and

cutlery

• Wash 60 °C• Rinse


P4 3)

• Normal soil• Crockery and

cutlery



P5 • Light soil• Delicate crockery

and glassware

• Wash 45 °C• Rinses• Dry

• DryPlus

P6 4)

• All • Prewash

P7 5)

• Normal soil• Crockery and

cutlery


• DryPlus

1) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the tem-perature and the quantity of water, the energy consumption and the programme duration.2) This programme is suitable for washing a load or a half load with fresh or light soil in a short time.3) This programme offers the most efficient use of water and energy consumption for crockery and cutlery with normalsoil. This is the standard programme for test institutes.4) With this programme, you can quickly rinse off food remains from dishes and prevent odours forming in the appli-ance. Do not use detergent with this programme.5) This is the most silent programme. The wash pump works at a very low speed to reduce the noise generated by theappliance. Due to the low speed, the programme duration is long.

ENGLISH 10

Consumption values

Programme 1) Water(l)

Energy(kWh)

Duration(min)

P1 7.0 - 14.0 0.9 - 1.6 90 - 160

P2 12.5 - 14.5 1.4 - 1.7 170 - 190

P3 10.5 0.7 38

P4 13.4 0.81 143

P5 12 - 14 0.7 - 0.9 82 - 92

P6 4 0.01 14

P7 9.0 - 10.0 1.1 - 1.3 230 - 250

1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity ofdishes can change the values.

Information for test institutesTo receive the necessary information forconducting performance tests (e.g.according to EN60436), send an email to:[email protected] your request please include the productnumber code (PNC) found on the ratingplate.

For any other questions regarding yourdishwasher please refer to the service bookprovided with your appliance.

ENGLISH 11

Options

Desired options must beactivated every time before youstart a programme.It is not possible to activate ordeactivate options while aprogramme is running.

Not all options are compatiblewith each other. If you select noncompatible options, theappliance automaticallydeactivates one or more of them.Only the indicators of the stillactive options are on.

If an option is not applicable to aprogramme, the related indicatoris off or it flashes quickly for afew seconds and then goes out.

Activating options can affect thewater and energy consumptionas well as the programmeduration.

DryPlusActivate this option to boost the dryingperformance.The combination of DryPlus and rinse aidensures even better drying results.

DryPlus is a permanent option for allprogrammes other than P4 (ECO). It isautomatically activated in next cycles. Thisconfiguration can be changed at any time.

Every time P4 (ECO) is activated,DryPlus is off and needs to bechosen manually.

How to activate DryPlus

Press .The related indicator is on.The display shows the updated programmeduration.

ExtraHygieneThis option provides better hygiene resultsby keeping the temperature at 70 °C for atleast 10 minutes during last rinsing phase.

How to activate ExtraHygiene

Press .The related indicator is on.The display shows the updated programmeduration.The ExtraHygiene option is not applicableto the following programmes:

• P5 (Glass)• P6 (Rinse & Hold)• P7 (Extra Silent)

Settings

Programme selection mode and usermodeWhen the appliance is in programmeselection mode it is possible to set aprogramme and to enter the user mode.Settings available in the user mode:

• The activation or deactivation of therinse aid empty notification.

• The level of rinse aid according to therequired dosage.

• Activation or deactivation of the acousticsignal for the end of a programme.

• Selection of the colour of the TimeBeam.• The activation or the deactivation of the

optionAutoOpen.

ENGLISH 12

As the appliance stores the savedsettings, there is no need to configure itbefore every cycle.

How to set the programme selection modeThe appliance is in programme selectionmode when the display shows theprogramme number P4.After activation, the appliance is inprogramme selection mode by default. Ifnot, set the programme selection mode thefollowing way:Press and hold RESET until the appliance isin programme selection mode.

How to enter user modeMake sure the appliance is in programmeselection mode.To enter the user mode, press and holdsimultaneously and until theindicators , , , and flash and the display is blank.

The rinse aid empty notificationThe rinse aid helps to dry the dishes withoutstreaks and stains.The rinse aid is automatically releasedduring the hot rinse phase.When rinse aid chamber is empty, the rinseaid indicator is turned on notifying to refillrinse aid. If the drying results aresatisfactory while using multi-tablets only, itis possible to deactivate the notification forrefilling rinse aid. However, for best dryingperformance, always use rinse aid.If standard detergent or multi-tabletswithout rinse aid are used, activate thenotification to keep the rinse aid refillindicator active.

How to deactivate the rinse aid emptynotificationMake sure the appliance is in user mode.

1. Press .• The indicators , , and

are off.• The indicator still flashes.• The display shows the current setting.

– = the rinse aid emptynotification is deactivated.

– = the rinse aid emptynotification is activated.

2. Press to change the setting.3. Press the on/off button to confirm the

setting.

The rinse aid levelIt is possible to set the released quantity ofrinse aid between level 1 (minimumquantity) and level 6 (maximum quantity).Level 0 deactivates the rinse aid dispenserand no rinse aid is released.Factory setting: level 4.

How to set the rinse aid levelMake sure the appliance is in user mode.


are off.• The indicator still flashes.• The display shows the current setting:

e.g. = level 4.– The levels of rinse aid are from

0A to 6Awhere level 0A means rinse aid isnot used.

2. Press repeatedly to change thesetting.

3. Press the on/off button to confirm thesetting.

ENGLISH 13

Acoustic signalsAcoustic signals sound when a malfunctionof the appliance occurs. It is not possible todeactivate these acoustic signals.There is also an acoustic signal that soundswhen the programme is complete. Thisacoustic signal is activated by default andyou can deactivate it.In addition, an acoustic signal soundsbefore the AutoOpen opens the door. Thisacoustic signal stops only if AutoOpen isdeactivated.

How to deactivate the acoustic signal forthe end of a programmeMake sure the appliance is in user mode.



– = the acoustic signal isdeactivated.

– = the acoustic signal isactivated.

2. Press to change the setting.3. Press the on/off button to confirm the

setting.

The colour of the TimeBeamYou can change the colour of the TimeBeamto match it to the colour of the kitchen floor.Several colours are available. You can alsodeactivate the TimeBeam.

How to set the colour of the TimeBeamMake sure the appliance is in user mode.

1. Press .

• The indicators , , and are off.

• The indicator still flashes.• The display shows a number and the

letter C. Each number refers to adifferent colour.– = the TimeBeam is

deactivated.2. Press repeatedly to change the

colour.3. Press the on/off button to confirm the

setting.

AutoOpenAutoOpen improves the drying results withless energy consumption. During the dryingphase, the door opens automatically andremains ajar.

AutoOpen is automatically activated withall programmes excluding (ifapplicable).To improve the drying performance refer tothe DryPlus option or activate AutoOpen.

Do not try to close the appliancedoor within 2 minutes afterautomatic opening. This cancause damage to the appliance.

ENGLISH 14

If children, pets or people withdisabilities have access to theappliance, deactivate AutoOpen.The automatic opening of thedoor may pose a danger andexpose possible hazards insidethe appliance (such as knives,sharp objects, chemicals).

How to deactivate AutoOpenMake sure the appliance is in user mode.



– = AutoOpen is deactivated.– = AutoOpen is activated.

2. Press to change the setting.3. Press on/off to confirm the setting.

Daily use

1. Open the water tap.2. Press the on/off button to activate the

appliance.Make sure that the appliance is inprogramme selection mode.

• If the rinse aid indicator is on, fill therinse aid dispenser.

3. Load the baskets.4. Add the detergent.5. Set and start the correct programme for

the type of load and the degree of soil.Using the detergent

1 2

2

1

3

30 30

4

5

If the programmehas a prewashphase, put a smallquantity ofdetergent on theinner part of theappliance door.

ENGLISH 15

Setting and starting a programme

The Auto Off functionThis function decreases energy consumptionby automatically deactivating theappliance when it is not operating.The function comes into operation:• 5 minutes after the completion of the

programme.• After 5 minutes if the programme has not

started.

Starting a programme

Caution! Do not remove thebaskets from the dishwasherbefore a wash cycle.

1. Keep the appliance door ajar.2. Press the on/off button to activate the

appliance. Make sure that theappliance is in programme selectionmode.

3. Press or repeatedly untilthe display shows the number of theprogramme you want to start. Thedisplay will show the programmenumber for approximately 3 secondsand next the programme duration.

4. Set the applicable options.5. Close the appliance door to start the

programme.

Starting a programme with delay start1. Set a programme.2. Press repeatedly until the display

shows the delay time you want to set(from 1 to 24 hours).

The delay indicator comes on.3. Close the appliance door to start the

countdown.While a countdown is running it is possibleto increase the delay time but not to changethe selection of the programme andoptions.

When the countdown is completed, theprogramme starts.

Opening the door while the applianceoperatesOpening the door while a programme isrunning stops the appliance. It may affectthe energy consumption and theprogramme duration. After closing the door,the appliance continues from the point ofinterruption.

If the door is opened for morethan 30 seconds during thedrying phase, the runningprogramme ends. It does nothappen if the door is opened byAutoOpen function.

Cancelling the delay start while thecountdown operatesWhen you cancel the delay start you haveto set the programme and options again.Press and hold RESET until the appliance isin programme selection mode.

Cancelling the programmePress and hold RESET until the appliance isin programme selection mode.Make sure that there is detergent in thedetergent dispenser before you start a newprogramme.

End of the programmeWhen the programme is completed thedisplay shows 0:00 and the indicator ison.All buttons are inactive except for theon/off button.1. Press the on/off button or wait for the

Auto Off function to automaticallydeactivate the appliance.

ENGLISH 16

If you open the door before theactivation of Auto Off, the appliance isautomatically deactivated.

2. Close the water tap.

Hints and tips

GeneralThe following hints will ensure optimalcleaning and drying results in daily use andalso help to protect the environment.• Remove larger residues of food from the

dishes into the waste bin.• Do not pre-rinse dishes by hand. When

needed, use the prewash programme (ifavailable) or select a programme with aprewash phase.

• Always use the whole space of thebaskets.

• When loading the appliance, make surethat the dishes can be completelyreached and washed by the waterreleased from the spray arm nozzles.Make sure that items do not touch orcover each other.

• You can use dishwasher detergent andrinse aid separately or you can use themulti-tablets. Follow the instructionswritten on the packaging.

• Select the programme according to thetype of load and degree of soil. With theECO programme you have the mostefficient use of water and energyconsumption for crockery and cutlerywith normal soil.

Using rinse aid and detergent• Only use rinse aid and detergent for

dishwasher. Other products can causedamage to the appliance.

• The rinse aid helps, during the lastrinsing phase, to dry the dishes withoutstreaks and stains.

• Detergent tablets do not fully dissolvewith short programmes. To preventdetergent residues on the tableware, we

recommend that you use the tablets withlong programmes.

• Do not use more than the correctquantity of detergent. Refer to theinstructions on the detergent packaging.

Loading the baskets

Refer to the supplied leaflet withexamples of the load of thebaskets.

• Only use the appliance to wash itemsthat are dishwasher-safe.

• Do not put in the appliance items madeof wood, horn, aluminium, pewter andcopper.

• Do not put in the appliance items thatcan absorb water (sponges, householdcloths).

• Remove remaining food from the items.• Soak items with remaining burned food

in water.• Put hollow items (cups, glasses and pans)

with the opening down.• Make sure that cutlery and dishes do not

bond together. Mix spoons with othercutlery.

• Make sure that glasses do not touchother glasses.

• Put small items in the cutlery basket.• Put light items in the upper basket. Make

sure that the items do not move.• Make sure that the spray arm can move

freely before you start a programme.

Before starting a programmeMake sure that:• The filters are clean and correctly

installed.• The spray arms are not clogged.

ENGLISH 17

• There is dishwasher rinse aid .• The position of the items in the baskets is

correct.• The programme is applicable for the

type of load and for the degree of soil.• The correct quantity of detergent is used.

Unloading the baskets

For better drying results keep theappliance door ajar for someminutes before you remove thedishes.

1. Let the dishes cool down before youremove them from the appliance. Hotdishes are easily damaged.

2. First remove items from the lower basketthen the upper basket.

At the end of the program watercan still remain on the sides andon the door of the appliance.

Care and cleaning

Warning! Before maintenance,deactivate the appliance anddisconnect the mains plug fromthe main socket.

Dirty filters and clogged sprayarms decrease the washingresults. Make a check regularlyand, if necessary, clean them.

Cleaning the filters

1

Make sure thatthere are noresidues of food orsoil in or around theedge of the sump.

2

C

B

A

3

To remove filters (B)and (C) turn thehandlecounterclockwiseand remove. Pullapart filter (B) and(C). Wash the filterswith water.

4

Remove filter (A).Wash the filter withwater.

ENGLISH 18

5D

Put the flat filter (A)back in place. Makesure that it iscorrectly positionedunder the 2 guides(D).

6

Assemble filters (B)and (C). Put theminto position in filter(A). Turn the handleclockwise until itlocks.

An incorrect position of the filterscan cause bad washing resultsand damage to the appliance

Cleaning the filter of the inlet hose

1

Close the water tap.

2

A

Disconnect the hose.Turn the fastener Aclockwise.

3

Clean the filter ofthe inlet hose.

4

Cleaning the upper spray armWe recommend to clean the upper sprayarm regularly to prevent soil from cloggingthe holes.Clogged holes can cause unsatisfactorywashing results.1. Pull out the upper basket.2. To detach the spray arm from the

basket, press the spray arm upwardsand simultaneously turn it clockwise.

3. Wash the spray arm under runningwater. Use a thin pointed tool, e.g. atoothpick, to remove particles of soilfrom the holes.

4. To install the spray arm back, press thespray arm upwards and simultaneouslyturn it counterclockwise until it locks intoplace.

ENGLISH 19

External cleaning• Clean the appliance with a moist soft

cloth.• Only use neutral detergents.• Do not use abrasive products, abrasive

cleaning pads or solvents.

Internal cleaning• Carefully clean the appliance, including

the rubber gasket of the door, with a softdamp cloth.

• To maintain the performance of yourappliance, use a cleaning productdesigned specifically for dishwashers atleast once a month. Carefully follow theinstructions on the packaging of theproduct.

• Do not use abrasive products, abrasivecleaning pads, sharp tools, strongchemicals, scourer or solvents.

• Using short-duration programmesregularly can cause grease andlimescale buildup inside the appliance.Run long-duration programmes at leasttwice a month to prevent the buildup.

Troubleshooting

If the appliance does not start or it stopsduring operation. Before you contact anAuthorised Service Centre, check if you cansolve the problem by yourself with the helpof the information in the table.

Warning! Repairs not properlydone may result in serious risk tothe safety of the user. Anyrepairs must be performed byqualified personnel.

With some problems, the display showsan alarm code.The majority of problems that can occurcan be solved without the need to contactan Authorised Service Centre.

Problem and alarm code Possible solutionYou cannot activate the ap-pliance.

• Make sure that the mains plug is connected to the mainssocket.

• Make sure that there is no damaged fuse in the fuse box.

The programme does notstart.

• Make sure that the appliance door is closed.• If the delay start is set, cancel the setting or wait for the

end of the countdown.

ENGLISH 20

Problem and alarm code Possible solutionThe appliance does not fillwith water.The display shows or

.

• Make sure that the water tap is open.• Make sure that the pressure of the water supply is not

too low. For this information, contact your local waterauthority.

• Make sure that the water tap is not clogged.• Make sure that the filter in the inlet hose is not clogged.• Make sure that the inlet hose has no kinks or bends.

The appliance does notdrain the water.The display shows .

• Make sure that the sink spigot is not clogged.• Make sure that the drain hose has no kinks or bends.

The anti-flood device is on.The display shows .

• Close the water tap and contact an Authorised ServiceCentre.

The appliance stops andstarts more times during op-eration.

• It is normal. It provides optimal cleaning results and en-ergy savings.

The program lasts too long. • If the delayed start option is set, cancel the delay settingor wait for the end of the countdown.

The remaining time in thedisplay increases and skipsnearly to the end of pro-gram time.

• This is not a defect. The appliance is working correctly.

Small leak from the appli-ance door.

• The appliance is not levelled. Loosen or tighten the ad-justable feet (if applicable).

• The appliance door is not centred on the tub. Adjust therear foot (if applicable).

The appliance door is diffi-cult to close.

• The appliance is not levelled. Loosen or tighten the ad-justable feet (if applicable).

• Parts of the tableware are protruding from the baskets.

Rattling/knocking soundsfrom inside the appliance.

• The tableware is not properly arranged in the baskets.Refer to basket loading leaflet.

• Make sure that the spray arms can rotate freely.

The appliance trips the cir-cuit-beaker.

• The amperage is insufficient to supply simultaneously allthe appliances in use. Check the socket amperage andthe capacity of the meter or turn off one of the applian-ces in use.

• Internal electrical fault of the appliance. Contact an Au-thorised Service Centre.

ENGLISH 21

Refer to "Before first use", "Daily use", or "Hints and tips"for other possible causes.

Once you have checked the appliance,deactivate and activate the appliance. If

the problem occurs again, contact anAuthorised Service Centre.For alarm codes not described in the table,contact an Authorised Service Centre.

The washing and drying results are not satisfactory

Problem Possible cause and solutionPoor washing results. • Refer to "Daily use", "Hints and tips" and basket

loading leaflet.• Use more intensive washing programmes.• Clean spray arm jets and filter. Refer to "Care and

Cleaning".

Poor drying results. • Tableware has been left for too long inside a closedappliance.

• There is no rinse aid or the dosage of rinse aid is notenough. Set the rinse aid dispenser to a higher level.

• Plastic items may need to be towel dried.• For the best drying performance activate the option

DryPlus and set AutoOpen.• We recommend to always use rinse aid, even in com-

bination with multi-tablets.

There are whitish streaks orbluish layers on glasses anddishes.

• The release quantity of rinse aid is too much. Adjustthe rinse aid level to a lower level.

• The quantity of detergent is too much.

There are stains and dry wa-ter drops on glasses anddishes.

• The released quantity of rinse aid is not sufficient. Ad-just the rinse aid level to a higher level.

• The quality of the rinse aid can be the cause.

The dishes are wet. • For the best drying performance activate the optionDryPlus and set AutoOpen .

• The programme does not have a drying phase or hasa drying phase with low temperature.

• The rinse aid dispenser is empty.• The quality of the rinse aid can be the cause.• The quality of the multi-tablets can be the cause. Try a

different brand or activate the rinse aid dispenser anduse rinse aid and multi-tablets together.

The interior of the appliance iswet.

• This is not a defect of the appliance. it is caused by thehumidity in the air that condenses on the walls.

ENGLISH 22

Problem Possible cause and solutionUnusual foam during washing. • Use the detergent for dishwashers only.

• There is a leak in the rinse aid dispenser. Contact anAuthorised Service Centre.

Traces of rust on cutlery. • Silver and stainless steel cutlery were placed together.Avoid to put silver and stainless steel items close to-gether.

There are residues of deter-gent in the dispenser at theend of the programme.

• The detergent tablet got stuck in the dispenser andtherefore was not completely washed away by water.

• Water cannot wash away the detergent from the dis-penser. Make sure that the spray arm is not blocked orclogged.

• Make sure that items in the baskets do not impede thelid of the detergent dispenser from opening.

Odours inside the appliance. • Refer to "Internal cleaning".

Dull, discoloured or chippedtableware.

• Make sure that only dishwasher-safe items are wash-ed in the appliance.

• Load and unload the basket carefully. Refer to basketloading leaflet.

• Place delicate items in the upper basket.

Refer to "Before first use", "Daily use" or "Hints and tips"for other possible causes.

Technical information

Dimensions Width / height / depth(mm)

596 / 818 - 898 / 550

Electrical connection 1) Voltage (V) 200 - 240

Frequency (Hz) 50 / 60

Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)

Water supply Cold water 2) min 5 °C

Capacity Place settings 15

ENGLISH 23

Power consumption Left-on mode (W) 5.0

Off-mode (W) 0.101) Refer to the rating plate for other values.2) Cold water connection is recommended for best washing performance.

Environmental concerns

Recycle materials with the symbol . Putthe packaging in relevant containers torecycle it. Help protect the environment andhuman health by recycling waste ofelectrical and electronic appliances. Do not

dispose of appliances marked with thesymbol with the household waste. Returnthe product to your local recycling facility orcontact your municipal office.

IKEA guarantee

How long is the IKEA guarantee valid?This guarantee is valid for 5 years from theoriginal date of purchase of Your applianceat IKEA Pty Ltd, ABN 84006270757 or atCebas Pty Ltd, ABN 15 009 156 003 (BothTrading as IKEA). The original sales receiptis required as proof of purchase. If servicework is carried out under guarantee, thiswill not extend the guarantee period for theappliance.Who will execute the service?IKEA service provider will provide the serv-ice through its own service operations orauthorized service partner network. ContactIKEA for further information.If you encounter any trouble with theappliance and wish to register a service callor make a claim, please refer to www.ikea.com.au for your local store aftersales customer service center phonenumber, online email and opening times.The principal address and contact details inAustralia are:

For Queensland, New South Wales, andVictorian customers please contact:

IKEA Pty Ltd

IKEA Pty LtdIKEA Service OfficeL1 Clock Tower, 630 Princes HighwayTempe, NSW 2044

Contact - IKEA Customer Service atwww.IKEA.com.au

For Western Australian and SouthAustralian customers please contact:

Cebas Pty Ltd

8c Sunray Drive, Innaloo WA 6018Australia

Contact - IKEA Customer Service atwww.IKEA.com.au

What does this guarantee cover?The guarantee covers faults of the appli-ance, which have been caused by faulty

ENGLISH 24

construction or material faults from the dateof purchase from IKEA. This guarantee ap-plies to domestic use only. The productshave been designed and tested fordomestic purposes only and this guaranteedoes not cover damage arising from use ofthe Product in a commercial environment.The exceptions are specified under theheadline "What is not covered under thisguarantee?" Within the guarantee period,the costs to remedy the fault e.g. repairs,parts, labour and travel will be covered,provided that the appliance is accessiblefor repair without special expenditure.Replaced parts become the property ofIKEA.The guarantee exists only if the appliancecomplies and is installed in accordancewith:• The technical specifications.• The Assembly Instructions and user

manual Safety Information.IKEA's guarantee is subject to AustralianConsumer Law - see Schedule 2 toCompetition and Consumer Act, 2010. Thisguarantee is in addition to (and does notexclude, restrict or modify in any way) anynon-excludable statutory warranties inAustralia.What will IKEA do to correct the problem?IKEA appointed service provider will exam-ine the product and decide, at its sole dis-cretion, if it is covered under this guarantee.They will notify you as to whether yourclaim is covered under this guarantee. Ifyour claim is approved, the IKEA serviceprovider or its authorized service partner,will then, at its sole discretion, either repairthe defective product or replace it with thesame or a comparable product.What is not covered under thisguarantee?

• Normal wear and tear.• Deliberate or negligent damage, dam-

age caused by failure to observe operat-ing instructions, incorrect installation orby connection to the wrong voltage, dam-age caused by chemical or electro-chem-ical reaction, rust, corrosion or waterdamage including but not limited to dam-age caused by excessive lime in the wa-ter supply, damage caused by abnormalenvironmental conditions.

• Consumable parts including batteriesand lamps.

• Non-functional and decorative partswhich do not affect normal use of the ap-pliance, including any scratches and pos-sible colour differences.

• Accidental damage caused by foreignobjects including insect or vermininfestation or substances and cleaning orunblocking of filters, drainage systems orsoap drawers.

• Damage to the following parts: ceramicglass, accessories, crockery and cutlerybaskets, feed and drainage pipes, seals,lamps and lamp covers, screens, knobs,casings and parts of casings. Unless suchdamages can be proved to have beencaused by production faults.

• Cases where no fault could be found dur-ing a technician's visit.

• Repairs not carried out by our appointedservice providers and/or an authorizedservice contractual partner or wherenon-original parts have been used.

• Repairs caused by installation which isfaulty or not according to specification.

• The use of the appliance in a non-domes-tic environment i.e. professional use.

• Transportation damages. If a customertransports the product to their home orother address, IKEA is not liable for anydamage that may occur during transport.However, if IKEA delivers the product tothe customer's delivery address, thendamage to the product that occursduring this delivery will be covered bythis guarantee.

ENGLISH 25

• Cost for carrying out the initialinstallation of the IKEA appliance.However, if an IKEA service provider orits authorized service partner repairs orreplaces the appliance under the termsof this guarantee, the service provider orits authorized service partner will re-install the repaired appliance or installthe replacement, if necessary.

• The appliance's serial number orwarranty seal has been removed ordefaced.

How country law appliesOur goods come with guarantees thatcannot be excluded under the AustralianConsumer Law (ACL). You are entitled to areplacement or refund for a major failureand compensation for any other reasonablyforeseeable loss or damage.You are also entitled to have the goodsrepaired or replaced if the goods fail to beof acceptable quality and the failure doesnot amount to a major failure.This guarantee is not intended in any wayto limit or exclude such rights and remediesthat you may have under law.You can find out more information aboutthe Australian Consumer Law on the ACCCwebsite: www.accc.gov.auArea of validityThis IKEA guarantee applies only toproducts purchased and installed inAUSTRALIA .What you must do to make a claim underthe guarantee:To make a claim under the guaranteecontact IKEA after sales customer servicecenter at the above address, the IKEAcatalogue or refer to www.ikea.com.au foryour local store customer service phonenumber, online email and opening times.Please describe the problem that you are

facing with the appliance in detail alongwith your product article number (8 digitcode) and date of purchase at the time ofcall registration.Please do not hesitate to contact thededicated after sales customer servicecenter for IKEA appliances to:1. Make a service request under this guar-

antee;2. Ask for clarification on installation of the

IKEA appliance in the dedicated IKEAkitchen furniture.

3. Ask for clarification on user manual con-tents and specifications of the IKEA ap-pliance.

To ensure that we provide you with the bestassistance, please read carefully the As-sembly Instructions and/or the User Manualsection of this booklet before contacting us.How to reach us if you need our service

The IKEA after sales customer service centrewill assist you on the phone with basictrouble shooting for your appliance at thetime of service call request. Please refer tothe IKEA catalogue or www.ikea.com.auand select your local store for local storephone numbers and opening times.

Please describe the problem thatyou are facing with theappliance in detail alongwith your product article number( 8 digit code ) and date ofpurchase at the time of callregistration .

ENGLISH 26

SAVE THE SALES RECEIPT!Kindly keep all these details andoriginal invoice of purchasehandy during the servicetechnician's visit to enable him tocarry out the job.It is your proof of purchase andrequired for the guarantee toapply. Note that the receiptreports also the IKEA articlename and number (8 digit code)for each of the appliances youhave purchased.

ENGLISH 27

*

HYGIENISK AU · 2018. 7. 6. · person must install this appliance. • Remove all the packaging....

Documents

Transcript of HYGIENISK AU · 2018. 7. 6. · person must install this appliance. • Remove all the packaging....