Hydro Beam - StarTek...© 2019 StarTek Lighting America. All rights reserved. The information in...

© 2019 StarTek Lighting America. All rights reserved. The information in this document is subject to change without notice.

1960 Swanson Ct, Unit C, Gurnee, IL 60031 • (877) STARTEK • [email protected] • www.starteklightingamerica.com

Hydro Beam Direct

Type:

Project:

- 2/3/2020

FEATURES

• 2’, 4’ and 8’ individual units

• Fixtures can be linked together for continuous rows

• Efficacy up to 125 lm/W

• Soft diffuse direct lighting

• Textured outdoor powder coat finishes available in

white, black, and bronze

• Premium finishes also available

• Wet Location rated

• IP66

• 0-10v dimming is standard

MODEL LUMENS INPUT WATTS Lm/W

HYDROD-4-625-35K 2,500 24 105

HYDROD-4-1000-35K 4,000 36 110

HYDROD-8-625-35K 5,000 42 118

HYDROD-8-1000-35K 8,000 66 120

LUMEN PACKAGES Based on 3500K CCT. Other CCT available.

DIMENSIONS

HYDROD - - - - - -

SERIES - LENGTH - LUMENS PER FOOT - DISTRIBUTION - POWER INPUT

LOCATION - POWER INPUT TYPE - CCT (80+ CRI)

HYDROD 2=2FT 625=625 LPF SD=SatinIce Diffuse PIT=Top CNDI = Conduit 30K=3000K

4=4FT 1000=1000 LPF PIS=Side CDB05 = Cord, Black, 5’ 35K=3500K

8=8FT XXXX=Custom LPF PIE=End CDB10 = Cord, Black, 10’ 40K=4000K

CND/LINK XX=Run Length CDW05 = Cord, White, 5’ 50K=5000K

E2E/LINK XX=Run Length CDW10 = Cord, White, 10’

- - - -

- MOUNTING** - VOLTAGE - OPTIONS FINISH -

SM=Surface Mount U= 120v-277v CRI9050=Minimum 90 CRI (R9 50) PW=Powder Coat White

WM=Wall Mount MS=Motion Sensor PB=Powder Coat Black

PMW=Rigid Pendant, White (6”, 8”, 12”, 15”, 18”, 21”,27”,

30”, 36”, 42”, 48”, 54”, 60”, 66”, 72”, 84”, 96” in Size) #EM=Emergency Circuit PBR=Powder Coat Bronze

PMB=Rigid Pendant, Black (6”, 8”, 12”, 15”, 18”, 21”,27”,

30”, 36”, 42”, 48”, 54”, 60”, 66”, 72”, 84”, 96” in Size) #EMB10=10W EM Battery PO=Powder Coat Other*

RAWM= Rigid Arm Wall Mount GTD=Generator Transfer Device

SRG=Surge Protector *Factory to be supplied with

RAL# or color chip

EXAMPLE: HYDROD-4-625-SD-PIE-CDB05-35K-PB-SM-U-EMB10

ORDERING LOGIC

3.6”

4.4”



Hydro Beam Direct

Type:

Project:

- 2/3/2020

ROW CONFIGURATIONS

Linear runs are available in 4’ increments, utilizing 8’ and 4’ sections up to 50’.

Typically, runs are constructed with as many 8’ sections as allowed, and supplemented with 4’ sections to reach the desired length. If a

different configuration is needed to meet an aesthetic requirement, please indicate this on your P.O. when placing your order.

Standard runs over 8’ are as follows:

MOUNTING LOCATIONS END TO END LINK (E2E/LINK)

Each starter fixture will be provided with (2) mounting supports.

Each additional fixture will be provided with (1) support.

MOUNTING LOCATIONS CONDUIT LINK (CND/LINK)

Each fixture will be provided with (2) mounting supports.

WIRING LOCATIONS (TOP, SIDE, BACK)

Fixtures to be wired with UL listed wet location fittings per NEC

requirements



Hydro Beam Direct

Type:

Project:

- 2/3/2020

SM

SM=Surface Mount

WM=Wall Mount

PMW=Rigid Pendant, White (Specify Length)

PMB=Rigid Pendant, Black (Specify Length)

RAWM=Rigid Arm Wall Mount

WM

PMx

MOUNTING OPTIONS

5.0”

3.6”

0.50”

4.4”

3.6”

3.6”

4.4”

Ceiling

RAWM

4.4”

3.6”

10.” 1.6”



Hydro Beam Direct

Type:

Project:

- 2/3/2020

Model Lumens Watts LPW Model Lumens Watts LPW

HYDROD-4-625-SD-30K 2,500 25 102 HYDROD-8-625-SD-30K 5,000 43 115




PERFORMANCE

HYDROD-X-625-SD (80+ CRI)

HYDROD-X-1000-SD (80+ CRI)

Model Lumens Watts LPW Model Lumens Watts LPW

HYDROD-4-1000-SD-30K 4000 37 107 HYDROD-8-1000-SD-30K 8000 68 117




HYDROD-4-625-SD-35K

HYDROD-4-1000-SD-35K



Hydro Beam Direct

Type:

Project:

- 2/3/2020

FINISHES

STANDARD FINISHES

BLACK MINI TEXTURE WHITE MINI TEXTURE

Custom finishes (PO) will incur a set up fee and will add an extended lead time to your project.

PREMIUM STOCK FINISHES

NOTE: A minimal impact to lead times will apply to products specified with Premium Stock Finishes (PSF). It is not to

be assumed that these finishes are stocked in our warehouse, but rather, are readily available to us for your project.

All other custom finishes (PO) will incur a set up fee and will add an extended lead time to your project.

PSF001 (WOOD#1) PSF002 (WOOD#2) PSF003 (WOOD#3)

PSF004 (WOOD#4) PSF005 (WOOD#5) PSF006 (WOOD#6)

PSF007 (STONE #1) PSF008 (STONE #2) PSF009 (METAL #1)

BRONZE SPARKLE TEXTURE



Hydro Beam Direct

Type:

Project:

- 2/3/2020

Housing

Nominal 3 5/8” x 4 13/32” , 0.090 thick aluminum

housing

Color Colors for the housing are available in a powder coat-

ed white, black and bronze. Consult factory for cus-

tom colors.

Luminaire Length 4' or 8' lengths are available for a single stand-alone

section. Using contractor provided conduit, 4’ and 8’

sections can be joined to form longer rows up to 50’.

Lensing 1/8 Thick Impact resistant outdoor (F1) rated polycar-

bonate Lensing.

Source

Variable lumen packages are available in four

color temperature options (3000K, 3500K, 4000K

and 5000K) — all within 2.5 MacAdam ellipses.

Certification

Intertek cETLus Listed. RoHS (Restriction of Hazard-

ous Substances) and Made in USA.

Battery Power Sentry lithium ion battery providing up to

1300lm(10W) for 90 minutes. UL924 listed. Class 2

compliant. Meets Title 20 CEC (California Energy

Commission) efficiency standards.

Environment

Suitable for dry, damp, and wet locations.

Operating temp.: -40°C to +50°C

-40°F to +122°F

Dimming Driver Osram Optotronic Outdoor LED Driver allows

tunable output currents to achieve infinite config-

urations of output. UL Class P recognized. 0-10v

interface can be wired as Class 1 or Class 2 cir-

cuit.

Packaging

Sustainably manufactured outside cardboard

box and biodegradable, protective poly-foam

luminaire inserts.

SPECIFICATIONS

WARRANTY

5-year limited warranty. Complete warranty terms can be located at:

https://starteklightingamerica.com/wp-content/uploads/2019/11/Hydro_Beam_Warranty.pdf

Note: Actual performance may differ as a result of installation environment and final application.

All values are design or typical values, measured under laboratory conditions, at 25°C (77°F) .

CONTROL

Sensor

Hubbell WASP2 Low Voltage Digital Passive Infrared PIR. Integrated day-

light sensor for daylight harvesting applications. 24VDC, 120/277/347VAC,

120/277/347VAC (2 outputs), 208/240VAC, & 480VAC input voltage.

Hydro Beam - StarTek...© 2019 StarTek Lighting America. All rights reserved. The information in...

Documents

Transcript of Hydro Beam - StarTek...© 2019 StarTek Lighting America. All rights reserved. The information in...