Hydraulic Institute’s Test Standard for Rotodynamic PumpsStd Products Sales... · With the...

END SUCTION GENERAL SERVICE PUMPS

Peerless Pump Series C - Close Coupled Peerless Pump Series F -Frame Mounted

Flexible Coupled

SECTION 2340 Page 0.1 March 6, 2017

Indianapolis, IN46207-7026

Hydraulic Institute’s Test Standard for Rotodynamic Pumps

The Hydraulic Institute’s new test standard, ANSI/HI14.6, provides the pump community with a globally accepted standard for testing rotodynamic pumps, of the centrifugal, mixed flow, and axial types. It supersedes two test standards: ANSI/HI 1.6, for Centrifugal Pumps and ANSI/HI 2.6 for Vertical Pumps. The new standard features significant changes in test acceptance requirements and in educational content and contains “must-know” requirements for anyone involved with hydrostatic or performance testing of pumps.

With the addition of ANSI/HI 14.6, two significant standards now have identical pump acceptance test criteria with worldwide acceptance. The other standard is: ANSI/HI 11.6 Rotodynamic Submersible Pumps for Hydraulic Performance, Hydrostatic Pressure, Mechanical, and Electrical Acceptance Tests.

The previous versions, ANSI/HI 1.6 and ANSI/HI 2.6, served as the standards for centrifugal pumps for over a decade defining testing requirements. ANSI/HI 14.6 has similar test methods and procedures, but with noticeably different changes to test acceptance requirements and informational details. The updated standard is also formatted and organized in a way that provides the pump community with quick and easy access to information regarding rotodynamic pumps, terms and definitions, multiple acceptance tests, various testing procedures, and an array of useful information regarding pump characteristics, performance, and guidelines.

ANSI/HI 14.6 is meant to be used for acceptance testing at pump test facilities or laboratories only and cannot be used in its entirety for testing done in the field. This standard applies to the pump itself, (flange- to-flange relationship), without any fittings. However, additional information regarding pump testing with fittings and other equipment can be found in various appendices of the standard. If contractually agreed upon by the manufacturer/supplier and the purchaser, the pump may also be tested with a combination of fittings.

The differences between the previous versions of the test standard (ANSI/HI 1.6 and ANSI/HI 2.6) and new (ANSI/HI 14.6) standard are significant enough to warrant the attention of the pump community.

New terms

Normative: “What is written in the standard must be adhered to in order to comply with the

standard.” (ANSI/HI 14.6, p. vii)

Informative: “Written to inform and educate the user and do not require compliance.” (ANSI/HI 14.6, p. vii)

Guarantee point: “The specified and contractually agreed on rated point (duty point).”

(ANSI/HI 14.6, p. 10)

NPSH3: “Unless otherwise specified, a 3% drop in head (the accepted industry practice) will be used to determine NPSHR and defined as NPSH3.” (ANSI/HI 14.6, p. 19)

These terms appear throughout the body of the standard as well as in the appendices. The terms make it clear to the pump community which processes and procedures are necessary in order to adhere to the standard and which ones may be recommended for further consideration. In the case of NPSH3, this term allows the pump community to know exactly what percentage of a drop in head is used to determine the NPSHR (required), removing any ambiguity with that value. As a result, NPSH3 will be used instead of NPSHR.

Continued on page 0.2 Subject to change without notice


END SUCTION GENERAL SERVICE PUMPS Peerless Pump Series C - Close Coupled

Peerless Pump Series F -Frame Mounted Flexible Coupled

Indianapolis, IN 46207-7026

Continued from page 0.1

General sections

Throughout ANSI/HI 14.6, the pump community will find sections labeled “General” for pump acceptance tests, measurement uncertainty, test procedures, test arrangements, hydrostatic pressure testing, recommended tests, NPSH test requirements, measurement of pump power input, and special test methods. These sections provide an introduction and background information in advance of the substance and specific procedures of the topics. This added feature helps the document flow from section to section and highlights the importance of the respective topics.

Performance test acceptance grades and tolerances

Pump performance acceptance grades for flow, head, efficiency, and power are used in ANSI/HI 14.6 when

evaluating acceptance of a pump for a guarantee point. Note that either power or efficiency can be specified, but not both. The previous versions of the standard used two grades of accuracy for pump acceptance criteria, while ANSI/HI 14.6 uses three. The following table is an addition to the new standard, and is used to refer to acceptance grades and tolerance bands.

Six pump performance test acceptance grades are used: 1B, 1E, 1U, 2B, 2U, and 3B. Grade 1 is the most stringent grade, the “U” specifies having a unilateral tolerance band, and the “B” specifies having a bilateral tolerance band. Acceptance grade 1E can be used when energy efficiency is of importance, and is also bilateral.

It is left up to the purchaser and manufacturer to agree on a specific grade to use and judge if a particular

pump will meet a guarantee point. If no acceptance grade is specified, the standard reverts to the default test acceptance grade shown in the table that follows.

Continued on page 0.3

Subject to change without notice






Evaluation of flow, head, power, and efficiency Guarantee point evaluation shall be performed at the rated speed. In order to determine whether a pump meets the acceptance criteria, a plot of pump total head versus flow is produced and measured against the corresponding tolerance bands for the specified acceptance grade. The guarantee point for acceptance is defined as flow and head for one set of conditions. In a similar fashion, the efficiency and power plot versus rate of flow are produced and measured against the tolerance bands for the specified acceptance grade.

This new standard explains how to use tolerance bands to determine if the pump meets the acceptance criteria. It is important to also note that agreements should be reached between the buyer and seller as to the amount of uncertainty that will be allowed for acceptance.

Depending on the acceptance grade, the tolerance bands can either be unilateral or bilateral, with those tolerance lines forming a cross. As long as the pump head capacity curve passes through at least one of the arms of the cross, pump performance is acceptable.

In the case of a unilateral tolerance band, there will only be two hash marks labeling the limits of the length of two arms for the capacity curve to pass through, not allowing any negative tolerances. With a bilateral tolerance band, there will be four arms for the capacity curve to pass through, allowing for both positive and negative tolerances.

The hash marks on the horizontal head line represent the limits of flow tolerance, while the hash marks on the vertical flow line represent the limits of head tolerance. For the curve to successfully meet the


Subject to change to without notice






acceptance criteria, it must pass through the line and not the hash mark. Examples of both unilateral and bilateral acceptance are shown below.

Small pumps This new standard addresses acceptance criteria for “small” pumps with a shaft power input up to 10 kW (13.4 hp) but larger than 1 kW (1.3 hp). Characteristics of these pumps include a low horsepower, small impeller diameter, and smaller size dimensions. As a result of these characteristics, a wider efficiency tolerance is permitted than what is specified in Table 14.6.3.4, because those tolerances may be too stringent.








Due to the characteristics of these small pumps, they are much more sensitive to normal manufacturing variations and mechanical losses can vary, comprising a large portion of the power used to drive the pump. In addition, during testing, additional measured quantities are often small and more difficult to measure. These factors have influenced the new adoption of the following tolerance bands for pumps with an input power of 10 kW (13.4 hp) and below:

The manufacturer and the purchaser should agree on a set of tolerance factors to be used when testing smaller pumps. If the pump to be tested has an input power of 1 kW (1.3 hp) or less, special agreements between the manufacturer and purchaser on the acceptable tolerance factors should be made.

Recommended tests

Another addition to the new standard is a section describing recommended tests to be performed on the specified pump other than acceptance tests based on pump flow and head delivered. This section is located in Appendix D of the standard and includes information on various test types based on the type of pump to be tested.

The types of tests include: performance, hydrostatic, NPSH, and mechanical. The following table is provided in Appendix D to guide the pump community when determining additional testing for the pump:

String test

An important addition to the standard is Appendix G, String Test, which covers performance testing of the entire pumping system, including the motor, pump, and drive (e.g., gearbox, belt drive, etc.). This is a less accurate method of determining the true pump efficiency, since the input power to the pump shaft is calculated by taking into account the published motor and drive efficiencies. Since these efficiencies are








not known precisely, this method of calculating pump input power is less accurate than when the shaft torque and rpm are directly measured.

When a VFD is used as part of the string, it becomes very difficult to obtain an accurate value of input power to the pump shaft. Although many VFDs provide a measurement of output power, the value of this power is only approximate and is generally not accurate enough for acceptance testing. This reading also does not account for the reduction in motor efficiency when operated on VFD power. The following table can be used to compare various influencing factors for calculating pump efficiency for different string test configurations:

Hydrostatic pressure testing

The hydrostatic test pressure and test duration have been updated in the new test standard. The test pressure relates to the rated pressure at the ambient temperature of the item to be tested and is determined by the following:








The test duration is determined by the rated pressure level, with greater time required for those parts subjected to higher pressure.

Benefits of adopting ANSI/HI Standard 14.6 – Rotodynamic Pumps for Hydraulic Performance Acceptance Tests

The Hydraulic Institute is known among the global pump community and OEM community for standards address definitions, nomenclature, pump applications, installation, operation, as well as important test procedures for a variety of different pump types. As these standards evolve over time, it is in the best interests of those within the pump industry to consider how these standards impact the bottom line of their business…and to stay current with the latest HI standards.

The information provided in ANSI/HI standards help eliminate costly mistakes in pumping system projects, enhance project efficiency, and provides detailed trouble shooting guidance and many other benefits. Keeping in touch with the most recent versions of these standards is necessary for pump users, engineering consulting firms, pump OEMs, pump distributors, and suppliers to the pump industry.

Additional resources provided by the Hydraulic Institute

For a complete analysis of the new standard, visit www.Pumps.org and search for ANSI/HI 14.6-2011 Rotodynamic Pumps under the Products > Standards and Guidelines section to obtain your copy of the standard.

In order to gain an understanding of the differences between ANSI/HI 14.6 and ANSI/HI 1.6 and 2.6, view a recorded 1-hour webinar titled What’s changing in Rotodynamic Pump Acceptance Tests in North America?, by visiting: www.PumpSystemsMatter.org. A webinar on this subject will be held on December 18, at 1pm EST.

This webinar provides complimentary information on the significant differences between the previous versions and the new ANSI/HI 14.6 standard. From this Web site you can also access various E-Learning Courses, view Featured PSM Trainings, and access other informational and educational tools regarding pumps, pump systems, and pump standards. Upcoming webinars, delivered by leading industry experts, is also listed on www.PumpSystemsMatter.org. Participants in HI/PSM technical webinars are eligible to Professional Development Hour (PDH) credit.


Subject to change to without notice

http://www.pumps.org/

http://www.pumpsystemsmatter.org/

http://www.pumpsystemsmatter.org/






The Hydraulic Institute offers an extensive body of pump industry knowledge in its standards and guidelines, and Pump Systems Matter offers excellent training resources. To learn more about HI membership download the new “HI App” in the Apple App Store or Google Play Store. Search on “Hydraulic Institute” to download this useful tool to any Apple or Android tablet device.


END SUCTION GENERAL SERVICE

PUMPS Peerless Pump Types C- Close Coupled

F- Frame Mounted

SECTION 2340 Page 1 September 30, 2013

Area Bound Performance Curves

4852640 Rev.9-91


SECTION 2340 Page 2 September 30, 2013

END SUCTION GENERAL SERVICE PUMPS

Peerless Pump Types C- Close Coupled F- Frame Mounted


4852641 Rev. 9-91


END SUCTION GENERAL SERVICE

PUMPS Peerless Pump Types C- Close Coupled

F- Frame Mounted

SECTION 2340 Page 2.1 September 30, 2013



SECTION 2340 Page 2.2 September 30, 2013

END SUCTION GENERAL SERVICE PUMPS Peerless Pump Series C &F


15

20

25

30

40

50

60708090

100

150

200

2025

3040

5060

7080

90100

150200

250300

400500

600700

800 10001500

60

50

40

30

25

20

15

10

5

10 20 50 100 200 300

610A

615A615J

620A740

810A

810G 815A

815G

820A

825A830A

1140

1125

250300

8090

701020A

TOTAL

HEAD

FEET

900

METERS

GALLONS PER MINUTE (US gpm)

M 3 /HR

DAEH

LATOT

2900 rpm

4853081


Grundfos Corporation

2005 Dr Martin Luther King Jr St Indianapolis Indiana 46207-7026

Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :

Type: C - Close-Coupled or F Frame Mounted End Suction

Pump Model: Nom. Speed: 3500 RPM, 60 Hz ElectricPeerless - C F1 610A M & P

Impeller Dia.: inch

Curve No.: 3115001 /Rev 3-13Viscosity: 1.007

1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp

Tolerance : Hyd Inst-Peerless Std

Closed Valve Pressure ftImpeller No. SeePtslist

Flow - US gpm

2001901801701601501401301201101009080706050403020100

Pow

er

- hp 6

4

2

Head -

ft

180

160

140

120

100

80

60

40

20

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-6.00 inch, D2-5.00 inch, D3-4.00 inch

NP

SH

- f

t 15

10

5

Comments:Perf. curve represents typical perf, vel. head is incld. Perf. curves tests are performed in accordance with H.I.Stds.

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

3002752502252001751501251007550250

Pow

er

- hp 8

6

4

2

Head -

ft

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

25

20

15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed: 3500 RPM, 60 Hz ElectricPeerless - C F1 615J M & P

Impeller Dia.: inch

Curve No.: 3114056R /Rev 3-13Viscosity: 1.007

1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item : 3

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

2502402302202102001901801701601501401301201101009080706050403020100

Pow

er

- hp 8

6

4

2

Head -

ft

180

160

140

120

100

80

60

40

20

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

5004754504254003753503253002752502252001751501251007550250

Pow

er

- hp 15

10

5

Head -

ft

180

160

140

120

100

80

60

40

20

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

25

20

15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed:Peerless - C F1 F2 740 M & P

Impeller Dia.:

3500 RPM, 60 Hz Electric


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,5001,4001,3001,2001,1001,0009008007006005004003002001000

Pow

er

- hp 40

30

20

10

Head -

ft

240

220

200

180

160

140

120

100

80

60

40

20

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 30

20

10


Inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed: 3500 RPM, 60 Hz ElectricPeerless - C F1 F2 810A M & P

Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

240220200180160140120100806040200

Pow

er

- hp 15

10

5

Head -

ft

350

300

250

200

150

100

50

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

20

15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed: 3500 RPM, 60 Hz ElectricPeerless - C F1 810G M & P

Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

240220200180160140120100806040200

Pow

er

- hp 15

10

5

Head -

ft

350

300

250

200

150

100

50

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

400380360340320300280260240220200180160140120100806040200

Pow

er

- hp 20

15

10

5

Head -

ft

275

250

225

200

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

50

40

30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed: 3500 RPM, 60 Hz ElectricPeerless - C F1 F2 815G M & P

Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

3002752502252001751501251007550250

Pow

er

- hp 15

10

5

Head -

ft

275

250

225

200

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

40

30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

5004754504254003753503253002752502252001751501251007550250

Pow

er

- hp

25

20

15

10

5

Head -

ft

275

250

225

200

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

800750700650600550500450400350300250200150100500

Pow

er

- hp 30

20

10

Head -

ft

275

250

225

200

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 60

40

20


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,000950900850800750700650600550500450400350300250200150100500

Pow

er

- hp 40

30

20

10

Head -

ft

275

250

225

200

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

50

40

30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

800750700650600550500450400350300250200150100500

Pow

er

- hp

50

40

30

20

10

Head -

ft

450

400

350

300

250

200

150

100

50

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

50

40

30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed:Peerless - C F1 F21125 M

Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

800750700650600550500450400350300250200150100500

Pow

er

- hp 60

40

20

Head -

ft

450

400

350

300

250

200

150

100

50

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

50

40

30

20

10


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed:Peerless - C F2 1125 P

Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

800750700650600550500450400350300250200150100500

Pow

er

- hp 60

40

20

Head -

ft

450

400

350

300

250

200

150

100

50

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

50

40

30

20

10


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed:Peerless - C F2 1140 M

Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp


Closed Valve Pressure ftImpeller No. SeePtsList

Flow - US gpm

1,5001,4001,3001,2001,1001,0009008007006005004003002001000

Pow

er

- hp 80

60

40

20

Head -

ft

450

400

350

300

250

200

150

100

50

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10D3

D1


NP

SH

- f

t

40

30

20

10


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed:Peerless - F31140 P

Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,5001,4001,3001,2001,1001,0009008007006005004003002001000

Pow

er

- hp 80

60

40

20

Head -

ft

450

400

350

300

250

200

150

100

50

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10D3

D1


NP

SH

- f

t

40

30

20

10


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

80757065605550454035302520151050

Pow

er

- hp 0.8

0.6

0.4

0.2

0

Head -

ft

45

40

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 6

4

2


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

2001901801701601501401301201101009080706050403020100

Pow

er

- hp

1

0.5

Head -

ft

45

40

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10D3

D1


NP

SH

- f

t 15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed: 1750 RPM, 60 Hz ElectricPeerless - C F1 615J M & P

Impeller Dia.: inch

Curve No.: 3114055R /Rev 3-13Viscosity: 1.007

1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1501401301201101009080706050403020100

Pow

er

- hp

1

0.5

Head -

ft

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

300280260240220200180160140120100806040200

Pow

er

- hp 2

1.5

1

0.5

Head -

ft

45

40

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

800750700650600550500450400350300250200150100500

Pow

er

- hp

5

4

3

2

1

Head -

ft

55

50

45

40

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 15

10

5


.

inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1501401301201101009080706050403020100

Pow

er

- hp

2.5

2

1.5

1

0.5

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1501401301201101009080706050403020100

Pow

er

- hp 2

1.5

1

0.5

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

2001901801701601501401301201101009080706050403020100

Pow

er

- hp 3

2

1

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

25

20

15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1501401301201101009080706050403020100

Pow

er

- hp

2.5

2

1.5

1

0.5

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

20

15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

240220200180160140120100806040200

Pow

er

- hp 3

2

1

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

20

15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

400380360340320300280260240220200180160140120100806040200

Pow

er

- hp 4

3

2

1

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

5004754504254003753503253002752502252001751501251007550250

Pow

er

- hp 6

4

2

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

25

20

15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed: 1750 RPM, 60 Hz ElectricPeerless - C F1 840 M & P

Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,000950900850800750700650600550500450400350300250200150100500

Pow

er

- hp 8

6

4

2

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

4003753503253002752502252001751501251007550250

Pow

er

- hp 6

4

2

Head -

ft

140

120

100

80

60

40

20

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

600550500450400350300250200150100500

Pow

er

- hp

10

5

Head -

ft

140

120

100

80

60

40

20

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,000950900850800750700650600550500450400350300250200150100500

Pow

er

- hp 15

10

5

Head -

ft

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10D3

D1


NP

SH

- f

t

20

15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,5001,4001,3001,2001,1001,0009008007006005004003002001000

Pow

er

- hp 20

15

10

5

Head -

ft

140

120

100

80

60

40

20

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

2,0001,7501,5001,2501,0007505002500

Pow

er

- hp 30

20

10

Head -

ft

140

120

100

80

60

40

20

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1

D1-10.00 inch, D2-9.00 inch, D3-8.00 inch, D4-7.00 inch

NP

SH

- f

t 15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

4003753503253002752502252001751501251007550250

Pow

er

- hp 6

4

2

Head -

ft

140

120

100

80

60

40

20

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 15

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

800750700650600550500450400350300250200150100500

Pow

er

- hp

10

5

Head -

ft

140

120

100

80

60

40

20

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10D3

D1


NP

SH

- f

t

20

15

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

4003753503253002752502252001751501251007550250

Pow

er

- hp 15

10

5

Head -

ft

180

160

140

120

100

80

60

40

20

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1


NP

SH

- f

t

40

30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed:Peerless - C F2 1220A M & P

Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

800750700650600550500450400350300250200150100500

Pow

er

- hp 20

15

10

5

Head -

ft

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

40

30

20

10


SECTION 2340

inch



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,5001,4001,3001,2001,1001,0009008007006005004003002001000

Pow

er

- hp

25

20

15

10

5

Head -

ft

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 30

20

10


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,5001,4001,3001,2001,1001,0009008007006005004003002001000

Pow

er

- hp 30

20

10

Head -

ft

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1


NP

SH

- f

t 30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

2,5002,2502,0001,7501,5001,2501,0007505002500

Pow

er

- hp 60

40

20

Head -

ft

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1


NP

SH

- f

t

50

40

30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

3,0002,7502,5002,2502,0001,7501,5001,2501,0007505002500

Pow

er

- hp 80

60

40

20

Head -

ft

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1


NP

SH

- f

t

40

30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :

Type: F - End-Suction Frame Mounted

Pump Model: Nom. Speed:Peerless - F41260AM & AP

Impeller Dia.:


Curve No.: 3114041/Rev3-13Viscosity: 1.007

1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

4,0003,7503,5003,2503,0002,7502,5002,2502,0001,7501,5001,2501,0007505002500

Pow

er

- hp

100

50

Head -

ft

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1


NP

SH

- f

t 30

20

10


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed:Peerless - C F3 1425 M & P

Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

800750700650600550500450400350300250200150100500

Pow

er

- hp 30

20

10

Head -

ft

225

200

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10D4 D1


NP

SH

- f

t

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,000950900850800750700650600550500450400350300250200150100500

Pow

er

- hp 40

30

20

10

Head -

ft

225

200

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1


NP

SH

- f

t

20

15

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed:Peerless - C F3 1430G M & P

Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,000950900850800750700650600550500450400350300250200150100500

Pow

er

- hp 30

20

10

Head -

ft

225

200

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 15

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,5001,4001,3001,2001,1001,0009008007006005004003002001000

Pow

er

- hp

50

40

30

20

10

Head -

ft

225

200

175

150

125

100

75

50

25

0

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D1

D3


NP

SH

- f

t

25

20

15

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

2,5002,2502,0001,7501,5001,2501,0007505002500

Pow

er

- hp

100

50

Head -

ft

275

250

225

200

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 30

20

10


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

4003753503253002752502252001751501251007550250

Pow

er

- hp 1.5

1

0.5

Head -

ft

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10D3 D1


NP

SH

- f

t

20

15

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

600550500450400350300250200150100500

Pow

er

- hp 2

1.5

1

0.5

Head -

ft

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

800750700650600550500450400350300250200150100500

Pow

er

- hp 6

4

2

Head -

ft

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t 15

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,5001,4001,3001,2001,1001,0009008007006005004003002001000

Pow

er

- hp 8

6

4

2

Head -

ft

45

40

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1


NP

SH

- f

t

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

2502252001751501251007550250

Pow

er

- hp 4

3

2

1

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1


NP

SH

- f

t

20

15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

5004754504254003753503253002752502252001751501251007550250

Pow

er

- hp 6

4

2

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

20

15

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

800750700650600550500450400350300250200150100500

Pow

er

- hp 8

6

4

2

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10D3

D1


NP

SH

- f

t 15

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,000950900850800750700650600550500450400350300250200150100500

Pow

er

- hp

10

5

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1


NP

SH

- f

t 15

10

5


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,5001,4001,3001,2001,1001,0009008007006005004003002001000

Pow

er

- hp 15

10

5

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1


NP

SH

- f

t 30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.: inch


1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

2,0001,7501,5001,2501,0007505002500

Pow

er

- hp 20

15

10

5

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1


NP

SH

- f

t 30

20

10


SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :

Type: F - End-Suction Frame Mounted

Pump Model: Nom. Speed:Peerless - F41260AM & AP

Impeller Dia.:


Curve No.: 3115035/Rev3-13Viscosity: 1.007

1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

3,0002,7502,5002,2502,0001,7501,5001,2501,0007505002500

Pow

er

- hp 30

20

10

Head -

ft

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

20

15

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

5004754504254003753503253002752502252001751501251007550250

Pow

er

- hp 8

6

4

2

Head -

ft

90

80

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1


NP

SH

- f

t

8

6

4

2


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

800750700650600550500450400350300250200150100500

Pow

er

- hp

10

5

Head -

ft

90

80

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1


NP

SH

- f

t 15

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed:Peerless - C F3 1430G M & P

Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

600550500450400350300250200150100500

Pow

er

- hp

10

5

Head -

ft

90

80

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

1,000950900850800750700650600550500450400350300250200150100500

Pow

er

- hp

10

5

Head -

ft

90

80

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10D3

D1


NP

SH

- f

t 15

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:



1.000

68 °F

WaterFluid:

Temperature:

Sp. Gravity:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

US gpm

ft

hp

ft

%

Power Required : hp



Flow - US gpm

2,0001,8001,6001,4001,2001,0008006004002000

Pow

er

- hp 60

40

20

Head -

ft

225

200

175

150

125

100

75

50

25

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1


NP

SH

- f

t

20

15

10

5


inch

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW


Closed Valve Pressure m

kg/m³

Impeller No. SeePtslist

Flow - m³/h

3029282726252423222120191817161514131211109876543210

Pow

er

- kW

2.5

2

1.5

1

0.5

Head -

m

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-152.40 mm, D2-127.00 mm, D3-101.60 mm

NP

SH

- m

5

4

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW


Closed Valve Pressure mkg/m³


Flow - m³/h

605856545250484644424038363432302826242220181614121086420

Pow

er

- kW 3

2

1

Head -

m

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-152.40 mm, D2-127.00 mm, D3-101.60 mm

NP

SH

- m

5

4

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

1009080706050403020100

Pow

er

- kW 6

4

2

Head -

m

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-152.40 mm, D2-127.00 mm, D3-101.60 mm

NP

SH

- m

5

4

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed: 2900 RPM, 50 Hz ElectricPeerless - C F1 F2 740 M & P

Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

240220200180160140120100806040200

Pow

er

- kW 15

10

5

Head -

m

45

40

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-177.80 mm, D2-158.75 mm, D3-139.70 mm

NP

SH

- m

8

6

4

2


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

50484644424038363432302826242220181614121086420

Pow

er

- kW

8

6

4

2

Head -

m

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-203.20 mm, D2-177.80 mm, D3-152.40 mm

NP

SH

- m

5

4

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

4038363432302826242220181614121086420

Pow

er

- kW 6

4

2

Head -

m

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-203.20 mm, D2-177.80 mm, D3-152.40 mm

NP

SH

- m

6

4

2


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

80757065605550454035302520151050

Pow

er

- kW

8

6

4

2

Head -

m

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-203.20 mm, D2-177.80 mm, D3-152.40 mm

NP

SH

- m 10

5


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

50484644424038363432302826242220181614121086420

Pow

er

- kW

8

6

4

2

Head -

m

55

50

45

40

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-203.20 mm, D2-177.80 mm, D3-152.40 mm

NP

SH

- m 10

5


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

10095908580757065605550454035302520151050

Pow

er

- kW

10

5

Head -

m

55

50

45

40

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-203.20 mm, D2-177.80 mm, D3-152.40 mm

NP

SH

- m

8

6

4

2


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW



kg/m³


Flow - m³/h

1501401301201101009080706050403020100

Pow

er

- kW 15

10

5

Head -

m

55

50

45

40

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-203.20 mm, D2-177.80 mm, D3-152.40 mm

NP

SH

- m 10

5


Grundfos - RAPID v8.25.9.1 (Windows 7) - 06th March 2012.

mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

200180160140120100806040200

Pow

er

- kW 15

10

5

Head -

m

55

50

45

40

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-203.20 mm, D2-177.80 mm, D3-152.40 mm

NP

SH

- m 10

5


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW



kg/m³


Flow - m³/h

1501401301201101009080706050403020100

Pow

er

- kW

20

15

10

5

Head -

m

90

80

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-254.00 mm, D2-228.60 mm, D3-203.20 mm

NP

SH

- m 10

5


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

2001901801701601501401301201101009080706050403020100

Pow

er

- kW 30

20

10

Head -

m

90

80

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-254.00 mm, D2-228.60 mm, D3-203.20 mm

NP

SH

- m 10

5


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed: 2950 RPM, 50 Hz ElectricPeerless - C F1 F2 1125 M

Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

140120100806040200

Pow

er

- kW

25

20

15

10

5

Head -

m

90

80

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-266.70 mm, D2-236.22 mm, D3-203.20 mm

NP

SH

- m 10

5


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed: 2950 RPM, 50 Hz ElectricPeerless - C F2 1125 P

Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

140120100806040200

Pow

er

- kW

25

20

15

10

5

Head -

m

90

80

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-266.70 mm, D2-236.22 mm, D3-203.20 mm

NP

SH

- m 10

5


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed: 2900 RPM, 50 Hz ElectricPeerless - C F2 1140 M

Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW



Impeller No. SeePtsList

Flow - m³/h

2502402302202102001901801701601501401301201101009080706050403020100

Pow

er

- kW

40

30

20

10

Head -

m

90

80

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-266.70 mm, D2-234.95 mm, D3-203.20 mm

NP

SH

- m

8

6

4

2


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :


Pump Model: Nom. Speed: 2900 RPM, 50 Hz ElectricPeerless - F3 1140 P

Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

2502402302202102001901801701601501401301201101009080706050403020100

Pow

er

- kW

40

30

20

10

Head -

m

90

80

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-266.70 mm, D2-234.95 mm, D3-203.20 mm

NP

SH

- m

8

6

4

2


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

20191817161514131211109876543210

Pow

er

- kW 0.3

0.2

0.1

0

Head -

m

9

8

7

6

5

4

3

2

1

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-152.40 mm, D2-127.00 mm, D3-101.60 mm

NP

SH

- m

2.5

2

1.5

1

0.5


SECTION 2340

mm



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW



kg/m³


Flow - m³/h

50484644424038363432302826242220181614121086420

Pow

er

- kW

0.8

0.6

0.4

0.2

0

Head -

m

9

8

7

6

5

4

3

2

1

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-152.40 mm, D2-127.00 mm, D3-101.60 mm

NP

SH

- m

2.5

2

1.5

1

0.5


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

1501401301201101009080706050403020100

Pow

er

- kW

2

1.5

1

0.5

Head -

m

14

12

10

8

6

4

2

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-177.80 mm, D2-158.75 mm, D3-139.70 mm

NP

SH

- m

4

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

242220181614121086420

Pow

er

- kW

1

0.5

Head -

m

18

16

14

12

10

8

6

4

2

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-203.20 mm, D2-177.80 mm, D3-152.40 mm

NP

SH

- m

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

50484644424038363432302826242220181614121086420

Pow

er

- kW

1

0.5

Head -

m

14

12

10

8

6

4

2

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-203.20 mm, D2-177.80 mm, D3-152.40 mm

NP

SH

- m

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

80757065605550454035302520151050

Pow

er

- kW 1.5

1

0.5

Head -

m

14

12

10

8

6

4

2

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-203.20 mm, D2-177.80 mm, D3-152.40 mm

NP

SH

- m

8

6

4

2


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax :

Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

605856545250484644424038363432302826242220181614121086420

Pow

er

- kW

2.5

2

1.5

1

0.5

Head -

m

24

22

20

18

16

14

12

10

8

6

4

2

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-254.00 mm, D2-228.60 mm, D3-203.20 mm

NP

SH

- m

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

1501401301201101009080706050403020100

Pow

er

- kW

4

3

2

1

Head -

m

24

22

20

18

16

14

12

10

8

6

4

2

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-254.00 mm, D2-228.60 mm, D3-203.20 mm

NP

SH

- m

4

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

2001901801701601501401301201101009080706050403020100

Pow

er

- kW

10

5

Head -

m

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-254.00 mm, D2-228.60 mm, D3-203.20 mm

NP

SH

- m

4

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

2502402302202102001901801701601501401301201101009080706050403020100

Pow

er

- kW

10

5

Head -

m

24

22

20

18

16

14

12

10

8

6

4

2

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-254.00 mm, D2-228.60 mm, D3-203.20 mm

NP

SH

- m

6

4

2


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

400380360340320300280260240220200180160140120100806040200

Pow

er

- kW

10

5

Head -

m

24

22

20

18

16

14

12

10

8

6

4

2

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-254.00 mm, D2-228.60 mm, D3-203.20 mm

NP

SH

- m

4

3

2

1


SECTION 2340

mm



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

605550454035302520151050

Pow

er

- kW 3

2

1

Head -

m

24

22

20

18

16

14

12

10

8

6

4

2

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-266.70 mm, D2-236.22 mm, D3-203.20 mm

NP

SH

- m

5

4

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

1501401301201101009080706050403020100

Pow

er

- kW

5

4

3

2

1

Head -

m

24

22

20

18

16

14

12

10

8

6

4

2

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-266.70 mm, D2-234.95 mm, D3-203.20 mm

NP

SH

- m

4

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

80757065605550454035302520151050

Pow

er

- kW 6

4

2

Head -

m

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1

D1-304.80 mm, D2-279.40 mm, D3-254.00 mm, D4-228.60 mm

NP

SH

- m 10

5


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

1501401301201101009080706050403020100

Pow

er

- kW

10

5

Head -

m

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-304.80 mm, D2-279.40 mm, D3-254.00 mm

NP

SH

- m

8

6

4

2


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

2001901801701601501401301201101009080706050403020100

Pow

er

- kW

10

5

Head -

m

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3D1

D1-304.80 mm, D2-279.40 mm, D3-254.00 mm

NP

SH

- m

6

4

2


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

300280260240220200180160140120100806040200

Pow

er

- kW 15

10

5

Head -

m

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10D3

D1

D1-304.80 mm, D2-279.40 mm, D3-254.00 mm

NP

SH

- m

8

6

4

2


SECTION 2340

mm



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

400380360340320300280260240220200180160140120100806040200

Pow

er

- kW

25

20

15

10

5

Head -

m

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1

D1-304.80 mm, D2-279.40 mm, D3-254.00 mm, D4-228.60 mm

NP

SH

- m 10

5


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW



kg/m³


Flow - m³/h

6005705405104804504203903603303002702402101801501209060300

Pow

er

- kW 30

20

10

Head -

m

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1

D1-304.80 mm, D2-279.40 mm, D3-254.00 mm, D4-228.60 mm

NP

SH

- m 10

5


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

1501401301201101009080706050403020100

Pow

er

- kW

10

5

Head -

m

45

40

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1

D1-355.60 mm, D2-330.20 mm, D3-304.80 mm, D4-279.40 mm

NP

SH

- m

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

2001901801701601501401301201101009080706050403020100

Pow

er

- kW 15

10

5

Head -

m

45

40

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D4

D1

D1-355.60 mm, D2-330.20 mm, D3-304.80 mm, D4-279.40 mm

NP

SH

- m

6

4

2


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

2001901801701601501401301201101009080706050403020100

Pow

er

- kW

10

5

Head -

m

45

40

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-355.60 mm, D2-330.20 mm, D3-304.80 mm

NP

SH

- m

4

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

300280260240220200180160140120100806040200

Pow

er

- kW

20

15

10

5

Head -

m

45

40

35

30

25

20

15

10

5

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10

D3

D1

D1-355.60 mm, D2-304.80 mm, D3-254.00 mm

NP

SH

- m

5

4

3

2

1


mm

SECTION 2340



Phone 317-925-9661

Project :

Quote No. :

Customer :

Phone :

Date :

Fax : Contact :

Page No. :



Impeller Dia.:


998.204

20 °C

WaterFluid:

Temperature:

Density:

cSt

Item :

Your Ref.:

Duty Flow :

Duty Head :

Peak Power:

NPSH Required :

Efficiency :

m³/h

m

kW

m

%

Power Required : kW




Flow - m³/h

5004754504254003753503253002752502252001751501251007550250

Pow

er

- kW

50

40

30

20

10

Head -

m

70

60

50

40

30

20

10

Eff

icie

ncy -

%

90

80

70

60

50

40

30

20

10D3

D1

D1-406.40 mm, D2-355.60 mm, D3-304.80 mm

NP

SH

- m

6

4

2


mm

SECTION 2340

Hydraulic Institute’s Test Standard for Rotodynamic PumpsStd Products Sales... · With the...

Documents

Transcript of Hydraulic Institute’s Test Standard for Rotodynamic PumpsStd Products Sales... · With the...