HUNTER DOUGLAS POLSKA Sp. z o.o. 03-228 Warszawa, ul. Marywilska 34 B tel. +48 022 614 16 71, fax. +48 022 814 16 95 e-mail: info@hunterdouglas.pl www.hunterdouglas.pl NIP 113 00 82 847                            REGON  010391180                ING  Bank  Śląski  S.A.   Nr   konta     15   1050   0086   1000   0022   7362   2510     Sąd  Rejonowy   dla  m.st.  Warszawy     XIII  Wydział  Gospodarczy               KRS   nr  0000040147        Kapitał  zakładowy  wpłacony  11.373.968,00 PLN Strona 1 z 12

HUNTER DOUGLAS

GENERAL OFFER OF ARCHITECTURAL PRODUCTS

� This offer presents basic information about standard product lines offered by Hunter Douglas but do not contains the whole production possibility so please contact if some similar elements are requested

� Prices submitted in this general offer are for approximate budget information for INVESTORS � Transaction prices for individual projects are the subject of detailed calculation and negotiation � The following prices are calculated for average material requirements per 1 m2 according to optimal

system assumptions � Edge profiles for interior ceiling and flashings for facades and exterior ceilings are not included in the

prices. Their requirements should be calculated individually for each project. � Additional information is available on our websites:

www. hunterdouglas.pl (polish version) www.hunterdouglascontract.com (other languages) www.solidwoodsystems.eu (solid wooden ceilings) www.nbkterracotta.com (ceramic facades NBK) www.3form.eu (3form materials)

Page 2 o 12

1. HUNTER DOUGLAS CEILINGS Hunter Douglas ceilings are divided into interior and exterior products lines due to the different technical requirements and conditions inside and outside the buildings. 1.1. LINEAR INTERIOR CEILINGS Linear ceiling consists of aluminium panels of widths from 30 till 225 mm and lengths from 800 till 6000 mm produced in a wide range of colours. The panels are clipped to invisible carriers suspended to the concrete ceiling (or another construction elements). Interior ceilings can be plain or perforated. Perforated panels can be supplied with sound absorbing non-woven tissue glued into the panel. Interior ceilings can be supplied with open joints or with joints filled with joint profiles. Multipanel ceiling BDX of different heights and widths of panels and high acoustic performance is a novelty in Hunter Douglas offer. This exceptional combination of ceiling systems allows designing very functional and beautiful three-dimensional forms. � Hunter Douglas 84R ceiling with 16 mm open joints between panels (open ceiling) or filled with joint

profiles (closed ceiling). Possibility of curving the panels. � Mutipanel 30/80/130/180B ceiling – multipanel system allowing clipping 5 varying width panels to one

carrier. Open (20 mm joints between panels) or closed version (V- or U-shaped joint profile) � Novelty BXD ceiling � Hunter Douglas 75/150C/225C ceiling – economical solution for closed linear ceiling � V100/V200 ceiling - open ceiling with vertical panels BUDGET PRICE: 20,00 – 35,00 EUR/ m2 depends on the type and colour of the ceiling 1.2. LINEAR EXTERIOR CEILINGS

The ceilings described in paragraph 1.1 are also supplied in exterior versions. The main technical differences between exterior and interior ceilings: � Carriers always made of aluminium � Panels always made of aluminium, thickness bigger than for interior panels � Aluminium alloy – more resistant for weather conditions � Luxacote coating – durable for corrosion, scratches and UV radiation � Required stiff windproof fixing to construction elements 150/200F ceiling - panels of width 150 or 200 mm, widely use as exterior ceilings and facade systems. Panels create closed, tight and durable surface. Economical solution for exterior ceilings. BUDGET PRICE: 30,00 - 40,00 EUR/ m2 depends on the type and colour of the ceiling

Page 3 o 12

1.3. INTERIOR WIDE PANEL CEILINGS 300C/L/A wide panel ceilings consists of panels of width 300 mm and length from 1000 till 6000 mm produced in a wide range of colours. Type 300C/L closed ceiling, type 300A closed ceiling with 10 mm receding joint closed with a flange. Panels can be made of aluminium or steel. Interior ceilings can be plain or perforated (special perforation NUAGE/KAOS). Curved ceilings can be achieved by using segmented carriers or by curving panels. Several possibilities of suspending panels: on carriers, on the edge profiles, on the bandraster. BUDGET PRICE : 40,00 – 50,00 EUR/ m2 depends on the type and colour of the ceiling 1.4. EXTERIOR WIDE PANEL CEILINGS

Exterior equivalent for interior wide panel ceilings 300A i 300C/300L. Special requirements for exterior ceilings are fulfilled. Panels are clipped to the carrier, which has to be rigidly fixed to the construction of the building. The panel span and carrier span depends on the wind load.

BUDGET PRICE : 45,00 - 55,00 EUR/ m2 depends on the type and colour of the ceiling 1.5. INTERIOR CELL CEILING (modules 50/75/86/100/120/150/200) Open Cell aluminium Hunter Douglas ceilings are made of crossing U-shape profiles of width 10 mm and height 22 mm (Cell 22), 40 mm (Cell 40) i 50 mm (Cell 50 i 50E) with own integrated suspending system. Cell ceiling type T15 with cell panels to lay down to standard T-profile system. Possible modules of cells – 50x50, 75x75, 86x86, 100x100, 120x120, 150x150, 200x200 mm. Standard colour white and silver. Other colours on request (minimal production quantity). Other special decorative types of cell ceilings: Linagrid and Unigrid. Linagrid – cell ceiling with linear look, Unigrid – ceiling with small cells, made of linear pieces of strip. Open cell ceilings allows simultaneously free air flow and visual closure. BUDGET PRICE : 15,00 - 70,00 EUR/ m2 depending on the type and colour of the ceiling

Page 4 o 12

1.6. PLANK & TILES CEILINGS Plank & Tiles Ceilings occur in many types and technical systems. They are made of steel or aluminium. Two types of products are in the offer, pre-painted (sheet painted before forming) and post-painted (panels painted after forming) Typical size for tiles ceilings is 600 x 600 mm, different systems of suspending is offered: clip-in (clipped to the carrier) or lay-on/lay-in (based on the profile type T or bandraster). Plank ceilings have rectangular size and different dimensions due to the project request. Many suspending systems including individual solution is possible: lay-on, lay-in, bandraster, clip-in, hook-on. Plank and tiles ceilings are available in exterior and interior version. Panels can be plain or perforated. BUDGET PRICE : 20,00 – 50,00 EUR/ m2 depends on the type and colour of the ceiling

1.7. XL PANEL CEILINS Unique solution for big panels. Possible measurements of panels up to 1500 x 4500 mm. Panel XL of width 12 mm is made as aluminium honeycomb covered with aluminium sheet. Panels can be supplied as plain or perforated. Hidden suspension system type hook-on. The XL Panel ceiling provides extraordinary flatness and smoothness of surface, unusual durability and quick and easy installation. BUDGET PRICE : 100,00 – 120,00 EUR/ m2 depends on the panel size, colours and details of ceiling

Page 5 o 12

1.8. STRETCH METAL CEILINGS Stretch Metal Hunter Douglas ceilings system consists of aluminium or steel tiles and planks made of stretch metal mesh. Panels are available in several typical square, diamond and round shape mesh with special meshes available on request. Tiles program consists of typical sizes of panels 600 x 600, 600 x 1200 mm and is designed to be installed to typical T-grid systems. Plank program is design to installation to C-grid systems (hidden), bandrasters and wall profiles. Plank program allows custom solution with special sizes using strengthened profiles and shapes of panels. Possible non-rectangular and curve shapes. BUDGET PRICE : 30,00 – 80,00 EUR/ m2 depends on the type of mesh and panels dimensions

1.9. TECHSTYLE ACOUSTIC CEILING Techstyle lightweight, large-format panels deliver great acoustical performance with a range of aesthetic options. Panels have special rigid, resilient honeycomb construction made of fibreglass. Installation on the typical T24-profiles: lay-on with visible construction or swing-down with hidden construction. Standard sizes of panels 1200 x 1200, 600 x 1200 and 600 x 600 mm. The recommended size for swing down system is 1200 x 1200 mm. For lay-on system is possible XL size 1200 x 2400 mm (and some more for request) BUDGET PRICE : 30,00 – 40,00 EUR/ m2 depends on the panel size

Page 6 o 12

1.10. SOLID LINEAR WOOD CEILINGS Hunter Douglas Wood system consist of three basic designs: Linear open, Linear Closed and Grid ceilings. Panels are made of different wood species. The wood can be finished in transparent lacquer or can be stained in any colour. The panels are treated with a vacuum pressure method to impregnate with FR liquid. Linear Wood achieves class B, s2, d-0 in reaction to fire. All solid wooden systems have interior and exterior version. The Linear open wood panels are mounted on a special metal rail with clips which is suspended to concrete ceiling or another construction elements. Linear open system allows to combine panels of different widths into one ceiling. Concave, convex and undulating forms of ceilings are possible by using special rail The Grid system consist of panels made of solid wooden slats connected to each other with black aluminium dowel or flexible dowel (for curved installation). Using male/female dowel connection systems ensures the seamless alignment of the panels. The demountable panels are fixed to a black metal grid with a dowel clip. Possible different sizes of slats and different spans between slats. Maximal length of the whole grid panel is 3300 mm, the width is between 300-400 mm. BUDGET PRICE : 100,00 – 150,00 EUR/ m2 (type Linear); 100,00 – 250,00 EUR/ m2 (type Grid)

1.11. WOOD PANELS CEILINGS with natural veneer Wood panels are made of special MDF or fiber-gypsum core covered on the both sides with natural veneer in an extensive choice of wood species. Panels can be finished in transparent lacquer or can be stained in any colour. Special fire retardant treatment is possible. Panels available in plain and perforated version. Wide range of patterns of perforation with different acoustic performance. Standard sizes of panels 600 x 6000 and 600 x 1200 mm. Another sizes on request. Three suspension systems: Classic (visible standard T-24 grid), Modern (half-hidden suspension on the standard T-24 grid), Prestige (hidden construction) BUDGET PRICE : 80,00 – 130,00 EUR/ m2 depends on the type of tiles and type of veneer. 2. ELEWACJE HUNTER DOUGLAS

Page 7 o 12

2. HUNTER DOUGLAS FACADES 2.1. SINGLE SKIN FACADES � Hunter Douglas aluminium single skin facade 84R with roll formed panels of width 84 mm clipped to the

carrier, which is fixed to the construction elements of building.  Façade  with  open  joints  4,  16  or  27  mm  or with joints closed with special joint profiles. Possibility of curving the panel along the length.

� Hunter Douglas aluminium single skin facade 150/200F with roll formed panels of width 150 or 200 mm

clipped to the carrier, which is fixed to the construction elements of building. Closed surface of the façade,  panels  are  connected  with  tongue-in-groove system.

� Hunter Douglas aluminium multipanel single skin facade MPF with roll formed panels of width

200,300,400,500,600 mm clipped to the carrier or fixed by special clamps to the construction elements of  building.  Closed  surface  of  the  façade,  panels  are  connected with tongue-in-groove system. Possibility of curving the panels along the length or bending.

All three systems allow horizontal, vertical and diagonal installation of the panels. Panels are made of corrosion resistant alloy with special scratch and UV resistant Luxacote finish. The systems has been tested for weather and wind resistance. Available  wide  range  of  colours  and  finishes  depends  on  the  type  of  façade. Application: renovation and erection of office, retail, industrial, residential and public buildings as the facades and external ceilings. BUGDET PRICES: Facade 84 R 30,00 - 50,00 EUR/m2 Facade 150/200F 35,00 – 45,00 EUR/m2 Fasade MPF 60,00 – 80,00 EUR/m2 Depend on the type, colour, quantity and project solution of facade

2.2. TERRACOTTA FACADE HUNTER DOUGLAS NBK CERAMIC Terracotta facade is a ventilated rainscreen system which consists of ceramic panels mounted on special substructure. A wide range of shapes, colours, surface finishes (including glazing) and sizes of elements offers extraordinary freedom in design and maximum scope for creative expression. Standards sizes: length 40-180 cm, width 20-60 cm, thickness 16-40 mm. Ceramic panels are mounted on the special clamps which are fixed to the substructure. The substructure is fixed to the construction of the building using brackets. Project of construction taking into account local regulation is required. Vertical joint of ceramic panels are filled with special PCV fugue. Substructure is not visible  on  the  surface  of  the  façade. Many special panels are offered: corner, diagonal, curved, baguette with round, triangle or square cross section. All ceramic elements are produced individually for each project in the colour, shape, surface finish and colour desired for custom application. Additional economical solution - Terracotta Light panels thickness of 16 mm, width 300 mm and length 1200 mm

Page 8 o 12

BUDGET PRICE: 40,00 – 200,00 EUR/ m2 depends on the thickness, sizes and texture of panels 2.3. QUADROCLAD FACADES Quadro Clad facade is a ventilated rainscreen system which consists of aluminium panels mounted on a special substructure. Quadro  Clad  façade  minimises  maintenance  as dirt and rainwater is evacuated through integrated channel at the back of each panel. Quadro Clad panel is made of aluminium honeycomb covered with coil-coated aluminium skin from both sides. This technology is originally developed for the aircraft industry and offers perfect combination of smooth, state-of-the-art flat surface and huge dimensions of panel. The width 25 mm, and maximal module 1500 x 6000 mm. The panels are very light 6 kg/m2 and extraordinary strong. Possible horizontal and vertical installation. Unique installation method allows quick and easy installation. Special mounting plate is fixed to the system rail by allen screw. The panel is hanged on the plates so removal of the each single panel from facade surface is possible. Custom shapes, curved panels a wide range of colours and materials (including imitation of wood, stainless steel, stone, copper, titanium and more) and individual prints give extraordinary possibilities in design BUDGET PRICE: 130,00 - 200,00 EUR/ m2 depends on sizes, colours and quantity

Page 9 o 12

2.4. SANDWICH WALL Architectural, flat sandwich panels allows realization of isolated walls in high class office buildings. Flat panel surfaces made of aluminium (standard) or steel (as an option) and insulating core of either foam or high density mineral wool. Concealed fixing of panels protects from thermal bridges. Standard thickness of panels 30, 50, 75, 100 mm, width up to 1200 mm, length up to 12 m. Flat panels available in a variety of colours, surface finishes and shapes, several joint systems, concealed fixing and glazing system, possibility of cranking and bending the panels perfect the detailing and expand the architectural possibilities BUDGET PRICE : 100,00 – 170,00 EUR/ m2 depends on type, thickness and size of panel

Page 10 o 12

3. SUN CONTROL SYSTEMS 3.1. LINEAR SUN CONTROL FACADE SYSTEMS Linear Hunter Douglas systems are used as window and façade  louvers,  covers  of  technical  installation  and  open partitions in multi-storey car parks. Panels are made of durable aluminium alloy. Panels are clipped to special carriers (SL4, SL5, SL2) or to special brackets (70/132S). Louvers can be installed as a horizontal (SL2) or vertical (other). Different profiles, carrier, modules allows many design possibilities. Horizontal system 110HC made of extruded aluminium combines sun control and elegant look of the façade. BUDGET PRICES :

Linear SL – 84 R 45,00 - 50,00 EUR/m2 Linear SL – 70S 55,00 - 80,00 EUR/m2 Linear SL – 132S 45,00 - 70,00 EUR/m2 Linear 110 HC 150,00 – 180,00 EUR/m2

Depend on type, module and colour

3.3. SLIDING SHUTTES/SLIDING SCREENS Sliding shutters set a new trend in architecture. This system providing building exteriors with a futuristic look as well as offering optimal solar effectiveness for maximum internal comfort. Frames of sliding shutters are made of aluminium, profiles are made of aluminium or red cedar wood. Profiles can be fixed or adjustable. Sliding screen where frame is made of aluminium and filled with fibreglass fabric. The connection between the screen and the frame is invisible and ensures permanent tension for the screen. BUDGET PRICE : 200,00 – 300,00 EUR/ m2 depends on quantity and surface properties

Page 11 o 12

3.4. FOLDING SCREENS Folding shutters is a custom made system for special expectations of architects and investors. The wings of shutters are folded orthogonally to the façade.  An  integrate  actuator  allows  obtainment  of  completely  close  and  flat  surface  of  façade  after  closing.  A  wide  range  of  filling  materials: wood profiles, perforated sheet, HPL panels, stretch metal, screen fabric give a freedom in designing. BUDGET PRICE: 600,00 – 800,00 EUR/ m2 depends on quantity, size and finish 3.5. SUN CONTROL SCREENS AND BLINDS

x Internal window coverings Innovative internal coverings are dedicated to design and commercial markets. Hunter Douglas offers a wide range of products: roller blinds, venetian blinds, Duette and Silhouette shades (and more). Each product can be controlled manually or motorised. EOS®500  program  is  a  novelty  which  allows  big  sizes  roller  blinds  of  width  more  than  3  m  and  height  up  to  6 m with many installing possibilities. A wide range of fabric is offered, polyester and fibreglass in different colour and translucency, to meet expectation of light control.

x External window coverings External systems allow the best sun and heat control because they keep the solar heat outside the building and reduce expenses for air-conditioning. External venetian blinds can be raised and lowered depending on weather conditions and their tilt angle can be regulated to keep direct sunlight out or let natural daylight in creating complete user flexibility. Controlled manually or motorised. Profiles of the blinds are made of weatherproof aluminium alloy. Profiles of different width 50 ,60, 80, 88 and 100 mm are offered. External roller blinds give flexible solution for classic and contemporary buildings with discrete design and refine details. A wide range of fabric with various colours, textures and translucency is offered. Roller blinds are operated manually or motorised. Hunter Douglas Beaufort system is a novelty which allows operation of the roller blinds even in case of strong winds. This product where the fabric is hermetically connected with guide channels presents additional advantage – works as a protection from insects. BUGDET PRICE : 80,00 – 150,00 EUR/ m2 depends on type and size

Page 12 o 12

4. 3form. Varia, Chroma, Glass 3form products are widely used in restaurants, hotels, residential apartments, commercial and public buildings as elements of ceilings, partitions, balustrades, furniture and decorative products for interior design. Materials: •  Varia –the dynamic translucent resin panel, which offers many colours, patterns, textures, interlayers and finishes. A unique method of sinking composition of decorative elements inside the panel give state-of-the-art designing possibilities. The standard collection and the custom projects are available. Heat-formable product allows production of the tree-dimensional panels. •  Chroma – the bold solid panel saturated with colour due to the patented technology and suitable density allows conduction of light and illumination if the whole surface of panel. Chroma panel during the usage can be renovated. •  Glass – durable, translucent, fire resistant material is a new look for glass in architecture. Glass is an elegant, exclusive product with much design possibilities of interlayers. BUDGET PRICES :

Varia 150,00- 400,00 EUR/m2 Chroma 450,00- 600,00 EUR/m2 Glass 1 300,00- 1 600,00 EUR/m2

Depend on finish, interlayer, texture and shape