Huawei Access Products Quick Reference Guide
-
Upload
silviofavaro -
Category
Documents
-
view
33 -
download
11
Transcript of Huawei Access Products Quick Reference Guide
-
Huawei EnterpriseAccess Products Quick Reference Guide
7Overview of the Access
UA5000 Series
DSLAM Series
xPON series - OLT
xPON Series - MDU
xPON Series - ONT
xPON Series - ONU (Power)
xPON Series - EOC
xPON Series - ODN
-01
-02
-04
-06
-08
-10
-11
-12
-13
-
Overview of the Access
With the development of the telecommunication technologies and the improvement on the quality of
life, common users propose new service requirements, and increasingly require high-speed data and
multimedia services apart from the legacy voice service. To meet such requirements of users, the access
network (AN) device must provide powerful capability of integrated services. In addition, networks are
evolving with each passing day, for example, from PSTN to NGN/IMS and FTTx. This also requires the AN
device to be future-proof.
Huawei FTTx solution provides access solutions for different application scenarios of custom, for
example, smart Grid solution for the Power, dual direction migration solution for the Broadcast, access
network of the railway, high-way, airport, etc. Cooperate with other product, Huawei FTTx solution also
provides Intelligent Building, Smart Zone solutions.
Overview
Solution Features
Network Topology
Access and aggregation integrated, helps to simplify network architecture, to lower TCO essentially.
Unied platform with multiple technologies: xPON / P2P / DSL / POTS.
Smooth network evolution solution extends AN' lifecycle and reduces TCO.
TDM
IP
PBXE1/POST
SBU
SBU
ONU
ONT FTTH
POTSPC
FTTB
FTTO Leased Line
AP
FTTC
MDU
OLTSplitter
E1/STM-1
10GE
SDH PSTN/3G
Internet/3GROUTER
FE/GE
FE
FE
FE
FE
Access 7-01
-
UA5000 Series
To meet the customer and market requirements, Huawei launches the UA5000, which has a perfect and
mature system design, and features exible networking, abundant service, and powerful functions. The
UA5000 complies with the RoHS directive, supports the seamless evolution from PSTN to NGN or IMS,
and also supports the upstream PON networking.
Overview
Product Appearance
Product Features
UA5000 FO2A ONU60A_V2
Innovative 4-in-1 platform implementing smooth network evolution.
Perfect inheritance of traditional services implementing seamless service migration.
Powerful bandwidth providing capability increasing the revenue.
Unique designs of the COMBO board and 64-port POTS board saving the TCO.
Perfect line assurance solution ensuring the O&M and user experience.
7-02 Access
-
Comparison Between UA5000 Series Products
parameters UA5000 F02A ONU60A_V2
Dimensions(W DH)
All kind of shelf600 mm 600 mm 2200 mm
436 mm 420 mm 86 mm
Shelf conguration 2HABA Maximum: 5
Access service type Data, video, POTS, multi-media POTS(PSTN and IP)
NNIGPON/EPONGE(optical/electrical)FE(optical/electrical)
GE(optical)FE(optical/electrical)
UNI
POTS, ISDN-BRI, ISDN-PRI, ADSL2+, ATM G.SHDSL.bis, SHDSL, VDSL2, TDM G.SHDSL, E1,V.35/V.24, 2/4E&M, FXO
POTS, ISDN
Upstream protocol SIP/H.248/V5 H248/MGCP
Working temperature -10 ~ +45 -10 ~ +55 -5 ~ +45
Working humidity 10%~90%
Access 7-03
-
DSLAM Series
MA5600/MA5603 supports non-blocking gigabit Ethernet (GE) switching fabric, backplane capacity of
210G make it easy to extend customer's system within at least 5 years. MA5600/5603 adopt HUAWEI
self design software platform named VRP5.0, which have enough Layer 3 features to satisfy the different
requirements for specied customers.
Overview
Product Appearance
Product Features
MA5600 MA5603
Provide various network ports, service ports, and maintenance ports to meet different networking
requirements.
As a multi-service access platform, the MA5600 supports multiple access modes and networking
modes to suit various networking scenarios in different environments and to meet different service
requirements.
Service switching capacity of up to 48Gbit/s, packet forwarding capability of up to 72Mbit/s, and high
integration of data switching, routing, and user management.
7-04 Access
-
In line with security requirements for custom services, the MA5600 provides the features to ensure the
security of the system and the user.
The abnormality processing capacity is taken into consideration in the system, software, and hardware
designs. This ensures the reliable running of the MA5600.
The MA5600 supports excellent management, maintenance, and monitoring functions, and works with
the N2510 line assurance system that facilitates routine maintenance and fault detection.
Comparison between DSLAM Series Products
Parameters MA5600 MA5603
Shelf Specications19 inches wide, front accessible16 slots,14 service slots
front accessible7 slots, 6 service slots
Dimensions (W D H)
MA5600 service shelf (without mounting brackets):
435.4 mm 420 mm 441.8 mm
MA5600 SPL shelf (without mounting brackets):
435.4 mm 420 mm 397.3 mm
MA5603 shelf (without mounting brackets):
436 mm 419.2 mm 219.5 mm
Shelf height 10U 5U
Upstream portsGE: 1-6FE: 1-6 optical ports; 1-4 electrical ports
Backplane bus capacity 210 Gbit/s 45 Gbit/s
Access service capacity ADSL2+, SHDSL, SHDSL.bis, VDSL2 ADSL2+, SHDSL, VDSL2
Maximum number of ports in a shelf
ADSL2+ ports:896SHDSL ports:448VDSL2 ports:448
ADSL2+ ports:384SHDSL ports:192VDSL2 ports:192
Access 7-05
-
Product Appearance
Product Features
MA5600T MA5603T
Access and Aggregation Integrated
Large aggregation capacity, 3.2T bit/s backplane capacity960G bit/s switch capacity, 512K MAC
addresses.
High density GE/10GE interfaces for cascading, up to 36*10GE or 384*GE interfaces, no need for
additional investment of aggregation switches.
High reliability networking support direct connection to the BRAS, ONU dual-homing to two OLTs for
redundancy and hitless software upgrade function.
xPON series - OLT
SmartAX MA5600T is the global rst OLT which integrates the functionality of aggregation switch and
edge router. It can provide high density GPON and Ethernet P2P optical access, triple-play service, TDM/
ATM/Ethernet leased line services for business customers and mobile backhaul with high reliability and
high precision clock, and high density GE/10GE interfaces for cascading remote access equipments.
MA5600T helps to simplify network architecture, to improve network reliability and lower TCO
essentially. There are two types of frame.
The large frame has 16 service slots while the middle frame (which named MA5603T) has 6 service slots.
The hardware and software are all compatible between MA5600T and MA5603T.
Overview
7-06 Access
-
Parameters MA5600T MA5603T
Backplane bus switching capacity 3.2Tbit/s 1.5Tbit/s
System L2 packet forwarding rate
SCUN: 726 Mpps (in the active/standby mode) or 1452 Mpps (in the load balancing mode)
SCUN: 726 Mpps (in the active/standby mode) or 1452 Mpps (in the load balancing mode)
Control board switching capacitySCUN: 480 Gbit/s (in the active/standby mode) or 960 Gbit/s (in the load balancing mode)
SCUN: 480 Gbit/s (in the active/standby mode) or 960 Gbit/s (in the load balancing mode)
Maximum number of upstream ports (GE ports in the GIU slot) in a shelf
8 8
Maximum number of upstream ports (10GE ports in the GIU slot) in a shelf
4 4
Maximum number of GPON ports in a shelf
128 48
Any Access
Large capacity IPTV service provision, 8K multicast users and 4K multicast channels and 2k concurrent
multicast channels.
H-QoS support 3-level QoS (Different ISP/ service/user) guarantees OLT wholesale.
Traditional E1 service access, Native TDM or CESoP for traditional E1 service of enterprise and mobile
base station access.
E2E high reliability guarantees business customers and mobile backhaul, BFD/LAG/MSTP/RRPP/Smart Link
for uplink redundancy and 50ms switching time of Type B/Type C for ber protection.
E-LAN function for local trafc inter-connection, meet the requirements of enterprise and campus
network.
Green
With Huawei self-developed GPON chipsets, the maximum power consumption of the 8-port GPON line
card is only 55W.
Unique energy-saving bus, the idle service card can be powered off.
Comparison between OLT Series Products
Access 7-07
-
MA5620 24 x FE + 24 x POTS
MA5626 24 x FE
MA5620 16 x FE + 16 x POTS
MA5626 16 x FE
MA5620 8 x FE + 8 x POTS
MA5626 8 x FE
Product Features
Automatic adaptation to GPON and GE.
Each of them provides two uplink ports using the small form-factor pluggable (SFP) optical modules to
meet different site requirements.
They fully meet requirements for pure LAN access service or voice service on an FTTB network, inherits
traditional voice services, and supports migration of narrowband users.
Plug-and-play (PnP) service provisioning: They allow remote issuing of conguration. A management
channel and service channel are created after each of them is powered on and registers successfully.
Manual onsite conguration is not required.
Efcient management and maintenance: free of eld software commissioning, remote acceptance,
remote upgrade and patch installation, and remote fault location.
Environment-friendly and energy conservation: Each of them uses a highly effective power supply
system to reduce system power consumption. Each of them uses passive cooling without any fans to
reduce device power consumption. Each of them uses POTS short-loop design to reduce port power
consumption in short distances.
xPON Series - MDU
The SmartAX MA5620/MA5626 and SmartAX MA5612 are industry-leading remote multi dwelling
units (MDUs) launched by Huawei, which provide broadband services and IP voice services on the
Fiber To The Building (FTTB) network for family users and small to medium enterprises. They feature
broad temperature range, low power consumption, mute design, high stability, environment friendlily
and energy conservation, and can be used on workbenches and installed in corridors and cabinets,
facilitating installation and maintenance.
Overview
Product Appearance
MA5612 MA5621
7-08 Access
-
Comparison between MDU Series Products
Parameters MA5621 MA5631 HG7022/7042 MA5612 MA5620 MA5626
NNI 1) 2EPON2) 2GPON3) 2GE4) 1GE+1
EPON5) 1GE+1
GPON
Provide 1 RF InProvide 2SFP and 1GE uplink-port 2EPON 2GPON 2GE 1GE+1GPON 1GE+1EPON 1GE
1 RF In 1) 2EPON2) 2GPON3) 2GE4) 1GE+1
EPON5) 1GE+1
GPON
1) 2EPON2) 2GPON3) 2GE4) 1GE+1
EPON5) 1GE+1
GPON
1) 2EPON2) 2GPON3) 2GE4) 1GE+1
EPON5) 1GE+1
GPON
UNI 4GE/FE+4RS485/RS232(two RS485 serial ports and two RS232 serial ports by default,
and each of the serial ports can be congured as an RS485 or RS232
serial port as required)
1-4RF Out 1) 1RF Out2) HG7022:2FE3) HG7042:4FE
1) 2GE+6FE2) 2GE+6FE+
16POTS3) 2GE+6FE+
16POTS+1RF
Service boards:EIUC board (each board provides eight FE ports),ASNB board (each board provides 16 POTS ports),E81A board (each board provides eight E1 ports).
8FE+8POTS16FE+16POTS24FE+24POTS
24FE: 19 inch16FE: 19 inch8FE: 11 inch4GE+4FE(POE): 19 inch8FE(reverse POE): 11 inch
dimensions(WDH)
180mm 235mm 44.4mm
282mm 163mm 116.5mm
170mm 110mm 28mm
19 inch 1U height:
442mm 245mm 43.6mm(without the heating board or mounting brackets)
19inch 1U height:
442mm 220mm 43.6mm
(without the heating board or mounting brackets)
19inch 1U height:
442mm 220mm 43.6mm (without the heating board or mounting brackets);
11 inch 1U height:
250mm 220mm 43.6mmwithout the heating board or mounting brackets) ;
Heatdissipationmode
No fans; passive cooling
No fans; passive cooling
No fans; passive cooling
fans No fans; passive cooling
No fans; passive cooling
Power supply mode
AC: 220V/110VDC: 12V/24V/48V
AC: 220V/110V/60V(60 V AC remote power supply and 220 V AC local power supply)
AC: 220V/110VDC: 12V
AC: 220VDC: 12Vbackup power: 12V
AC:220V AC: 220V,reverse POE power supply(8 FE)
VoIP / / / H.248/SIP H.248/SIP /
Access 7-09
-
Product Appearance
Product Features
Comparison between ONT Series Products
HG8010 HG8110 HG8240 HG8245 HG8247
Plug and play.
Remote diagnosis.
Batch method of upgrade.
High speed forwarding.
Green energy-saving.
Performance parameters
HG8010 HG8110 HG8240 HG8245 HG8247
Dimensions(WDH)143 mm 115 mm 30 mm
143 mm 115 mm 30 mm
195 mm 155 mm 34 mm
195 mm 174 mm 34 mm
268 mm 213 mm 34 mm
Interface type 1GE 1POTS+1GE 2POTS + 4GE2POTS + 4GE + 1USB + WiFi
2POTS + 4GE + 1USB + WiFi + 1RF
Average power consumption
5.5 W 7 W 7.5 W 8 W 11 W
Power supply
Adapter input: 100240 V AC, 5060Hz;
Adapter output: 1114 V DC, 1 A
Adapter input: 100240 V AC, 5060Hz
Adapter output: 1114 V DC, 1 A
Adapter input: 100-240 V AC, 50-60 Hz
Adapter output:11-14 V DC, 1 A
Adapter input: 100-240 V AC, 50-60 Hz
Adapter output: 11-14 V DC, 2 A
Adapter input: 100-240 V AC, 50-60 Hz
Adapter output: 11-14 V DC, 2 A
Weight(not include adapter)
About 400g About 400g About 500g About 550g About 800g
xPON Series - ONT
Huawei provides a series of ONT products for various FTTH scenarios, which are based on the uniform
platform. By using the GPON/EPON technology, VoIP, Internet, Wi-Fi and HD video services are provided for
home and SOHO users.
Overview
7-10 Access
-
Product Appearance
Product Features
Automatic adaptation to GPON and GE modes: The MA5621 provides two uplink ports that use the
small form-factor pluggable (SFP) optical modules to meet different site requirements.
Hand-in-hand PON protection.
Sealed casting aluminum shell and natural heat dissipation (waterproof, dust-proof, and corrosion-proof).
Auto-adaptive GE/FE electrical ports and congurable RS232 serial ports, reducing the number of
maintenance times.
Support for 6 kV surge protection capability, applying to thunderous and rainy areas.
Support for the working temperature ranging from -40 oC to +85oC, meeting extreme weather
conditions.
Auto-adaptive 9-60 V direct current (DC) input and 90-290 V alternating current (AC) input, facilitating
installation.
Unied network management and plug-and-play: free of eld software commissioning, remote
acceptance, remote upgrade and patch installation, and remote fault location.
xPON Series - ONU (Power)
The SmartAX MA5621 (MA5621 for short) is the rst multi-dwelling unit (MDU) specically designed
for smart grid telecommunication in the industry, which supports natural heat dissipation and provides
2*GE/2*GPON uplink ports and 4*GE/FE+4*RS232 user ports. The MA5621 allows terminal units to
remotely collect and transmit required information, for example, to remotely control the power, monitor
environment safety, and read meters for billing. The MA5621 also can be used for video monitor services.
The MA5621 features a broad temperature range, broad voltage range, low-power consumption, and high
stability, and can be used on workbenches and installed in corridors and cabinets.
Overview
MA5621
Access 7-11
-
Product Appearance
Product Features
MA5631 HG7022/HG7042
Device integration: rst ONU and EoC headend integrated product in the industry, saving optical node
space.
Unied NE: ONU and EoC headend using the same IP address, saving network resources.
Centralized NMS: a centralized NMS managing PON and EoC devices, reducing O&M costs.
High reliability: Supports dual uplinks and ring networks.
High bandwidth: Supports 300 Mbit/s service rate and 2.5 Gbit/s backplane bus rate.
xPON Series - EOC
The MA5631 is mainly used in a passive optical network (PON)+EoC (optiCable for short) network. The
MA5631 provides gigabit PON (GPON), and gigabit Ethernet (GE) upstream modes to exibly choose from,
and supports one to four-channel radio frequency (RF) input in the upstream direction and one to four-
channel RF output in the downstream direction. Supporting a valid bandwidth of currently 280 Mbit/s
(at the MAC layer) and future 1 Gbit/s, the MA5631 can meet users' requirements for bandwidth-hungry
services.
The EchoLife HG7022 EoC (HG7022) and EchoLife HG7042 EoC (HG7042) are indoor EoC terminals
tailored for home and SOHO (Small Ofce Home Ofce) users.
HG7022/HG7042 both models are designed for Homeplug AV standard cable network. Broadband data
are input via CATV cables. Then Ethernet and CATV data are separated to provide both video and data
services at the same time. The built-in duplex lter has no inuence on CATV signals.
Overview
7-12 Access
-
Product Appearance
Product Features
Best Economic: Huawei provides a comprehensive series of ODN products, the consultant-assisted
project consultancy service, and the optimal network planning scheme. By comprehensively analyzing
the feasibility of an ODN project, Huawei provides a best economic ODN solution for customer.
Fast Deployment: Based on rich engineering experience, Huawei concentrates efforts into engineering
efciency improvement by optimizing product design and engineering technologies to achieve fast FTTH
deployment.
Easy Management (iODN): iODN is endowed with multiple intelligence functions, such as automatically
identifying and managing optical ber connections, intelligently indicating optical ber connection
operations, and intelligently managing optical splitters. Using iODN, customer can automatically nd out
the target optical ber and appropriately operate it, paving the way for massive FTTH rollouts.
xPON Series - ODN
The optical distribution network (ODN) is an indispensable path for transmitting FTTx data and directly
affects the performance, reliability, and scalability of an FTTx system. Huawei provides a comprehensive
series of ODN products to deliver fast ODN customization services to carriers worldwide.
Overview
Page1
Series Product Series Full-series Product and Uniform Platform
ODF
FDT Outdoor FAT Indoor FAT Closure ATB
Buried Duct Aerial Air-blown Indoor multi-core Drop cable
Bare Splitter Bare Splitter Module Splitter Unit Splitter
Pigtail` Patch cord Adapter and other
Box
Optical Cable
Optical Splitter
Pigtail, Patchcord and Connector
Access 7-13