HP Ersatzteile für DesignJet 500Service Station and Left Spittoon 2 1 Ref 1 2 Left spittoon...
Transcript of HP Ersatzteile für DesignJet 500Service Station and Left Spittoon 2 1 Ref 1 2 Left spittoon...
1 HP Ersatzteile für DesignJet 500
+49 (0) 3723 / 6678 ‐ 0
Back Platen and Media Sensor 1
2
Ref 1
Part Number C7769-60140
Description Back platen assembly - Curved cover/guide that is installed below the paper drive roller (24-inches)
2
C7770-60155* Back platen assembly - Curved cover/guide that is installed below the paper drive roller (42-inches) C7769-60168* Media sensor - Installed in the front of the rear platen
Carriage, Trailing Cable, Belt, Encoder Strip 1
2
3
Ref 1 2
4 Part Number Description
C7769-60272* Printheadcarriageassembly-Includescarriage,bushings,penlatches,carriagepositionsensor,andlinesensor
C7769-60305 C7770-60274
C7769-60182
C7770-60014
C7769-60183
C7770-60013
Carriage assembly trailing cable kit - Includes installation instructions, trailing cables, two mounting clips, and a ferrite - Cables are 1.4m (4.7ft) long with 30 pin (M) edge connectors - For 24-inch models Carriage assembly trailing cable kit For 42-inch models - From Electronics Module to carriage assembly
Carriage belt (24-inch) - Carriage belt - Long belt attached to the carriage
Carriage belt (42-inch) - Carriage belt - Long belt attached to the carriage
Encoder strip (24-inch) - Connects from left to right side of printer
Encoder strip (42-inch) - Connects from left to right side of printer
3
4
2 HP Ersatzteile für DesignJet 500
+49 (0) 3723 / 6678 ‐ 0
Cutter 1
2
Ref 1
2
3
Part Number C7769-60390
C7769-60169
C7769-60409
Description Cutter assembly
Cutter bushing
Left cutter guide bracket and left encoder holder kit
Drive Roller Encoder Sensor
1 2
Ref 1 2
Part Number C7769-60171* C7769-60384
Description Cover kit for drive roller encoder sensor Drive roller encoder sensor - Installed on left end of paper drive roller
* Artikel sind obsolete, ohne Ersatz
3 HP Ersatzteile für DesignJet 500
+49 (0) 3723 / 6678 ‐ 0
Drive Roller and Transmission Gears
1
2
Ref 1
Part Number C7769-60412 C7770-60289 C7769-60177 2
Description Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (Axial) spring, lint free cloth, rubber glove, and instruction sheets - For 24-inch model Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (Axial) spring, lint free cloth, rubber glove, and instruction sheets - For 42-inch model Paper drive transmission gear kit - Includes two gears used to drive the paper drive roller
Electronics Module and Plugin Cards Electronics 2
1
3
* Artikel sind obsolete, ohne Ersatz
4 HP Ersatzteile für DesignJet 500
+49 (0) 3723 / 6678 ‐ 0
Ref 1 2
Part Number C7779-69263 J3110A J3111-69001
J3111A J3112-69001*
3
J3112A J3113A J4167A
J4169-69001* J4169A J7934-61011 J7934-69011 C2387A C2388A C7769-60244
C7769-60245
C7769-69260
C7772A
Description Electronics module - Contains main logic board, connectors for plug-in cards, connector for parallel interface cable, connector for USB cable, and cooling fan Ethernet 10Base-T (RJ-45) EIO network internal print server PC board - Ethernet 10Base-T (RJ-45) EIO Network PCA JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector - (J3111A) - NOTE: EIO interface boards are NOT interchan- geable with MIO boards Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA - Ethernet 10Base- T/10Base2 & LocalTalk (RJ-45, BNC, LocalTalk) EIO Network PCA JetDirect 610N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 con- nector - JetDirect 600N EIO Internal Print Server (Token Ring) LAN Interface Board - Has One RJ-45 and DB-9 Connectors (J3112A) - NOTE: EIO Boards are NOT JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors
JetDirect 600N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into pe- ripheral EIO slot JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors
JetDirect 610N Internal Print Server (10Base-T and 100Base-TX) LAN Interface Board - Has one RJ-45 connector - Plugs in Peripherial EIO Slot (Part of J4169A) JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peri- pheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peri- pheral EIO slot, has RJ-45 connector JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peri- pheral EIO slot, has RJ-45 connector 64MBSO-DIMMmemorymodule-ForDesignJet500orDesignJet800-CanbeinstalledONLYintotheformat- terboard(theformatterboardisoptionalforDesignJet500/500PSandstandardforDesignJet800/800PS) 128MBSO-DIMMmemorymodule-ForDesignJet500orDesignJet800-CanbeinstalledONLYintotheformat- terboard(theformatterboardisoptionalforDesignJet500/500PSandstandardforDesignJet800/800PS) 64MB SO-DIMM memory module - Can be installed ONLY into the formatter board
128MB SO-DIMM memory module - Can be installed ONLY into the formatter board
HP-GL/2andRTLformatterPCboard-HP-GL/2andRTLFormatterPCBoard(C7772A)-PlugsintoEIOCardSlot
Formatter upgrade kit - Adds HP-GL/2 and RTL support and a slot for an additional memory module - Plugs into an EIO card slot (for the DesignJet 500)
Front Platen
1
Ref 1
Part Number C7769-60174
Description Front platen kit - Includes platens for both the 24-inch and the 42-inch models
5 HP Ersatzteile für DesignJet 500
+49 (0) 3723 / 6678 ‐ 0
Ink Tubes and Ink Supply Station 3
1
2
Ref 1 2 3
Part Number Description
C7769-60381 C7769-60373
C7769-60164
Ink tubes assembly - Includes 4 ink tubes complete with hardware assemblies at both ends (Carriage crane and ink supply station crane), and 4 setup pens
Ink Supply Station (ISS) - Includes ink pump motor, pump sensor, and out-of-ink sensors
Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheads
Interconnect Cable
1
Ref 1
Part Number Description
C7769-60298 Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors - 1.6m (5.1ft) long - Interconnect Cable - the Main Wiring Harness From the Electronics Module to Many Other Locations
6 HP Ersatzteile für DesignJet 500
+49 (0) 3723 / 6678 ‐ 0
Left Cover
1
2
3
4
Ref 1 2
3
4
Part Number C7769-60299* C7769-60299*
C7769-60160
C7769-60160
Description Left end cover and EIO cover (Gray) Left end cover and EIO cover (Gray)
Trim kit - Installed between the main printer chassis and the left or right end covers (4 items in kit)
Trim kit - Installed between the main printer chassis and the left or right end covers (4 items in kit)
Paper-Axis Motor
1
Ref
1
Part Number
C7769-60377
Description
Paper axis motor assembly - Includes cables
* Artikel sind obsolete, ohne Ersatz
7 HP Ersatzteile für DesignJet 500
+49 (0) 3723 / 6678 ‐ 0
Pinchwheels and Pincharms
3
1
2
Ref
1
Part Number
C7769-60181 C7770-60115 C7769-60175
C7769-60378
2
3
Description
Pincharm lift mechanism - Includes cam (a long bar) , cam bushings, pincharm lever, pincharm lever bushing (24-Inch) Pincharm lift mechanism - Includes cam (a long bar) , cam bushings, pincharm lever, pincharm lever bushing (42-Inch) Pincharm assembly with wheels - (three used)
Pincharm sensor - Installed in right front of print chassis
8 HP Ersatzteile für DesignJet 500
+49 (0) 3723 / 6678 ‐ 0
Power Supply and Power Switch
1
Ref
1
Part Number
C7769-60387
Description
Power supply assembly - Includes power switch
Printer Stand 6
5
4
3
3 1
2
2
9 HP Ersatzteile für DesignJet 500
+49 (0) 3723 / 6678 ‐ 0
Ref
1
Part Number
C7781-60007
C7780-60002
C7769-60219
C7770-60031
C7770-60022 C7770-60021
C7781-60004
C7770-60020 C7770-60018
C7781A*
2
3
4
5
6
Description
Media bin (Graphite gray) - Plastic tray that mounts to the printer stand legs (24-Inch)
Media bin (Graphite gray) - Plastic tray that mounts to the printer stand legs (42-Inch)
Foot brace (24-Inch)
Foot brace (42-Inch)
Foot assembly (includes casters) - Mounts to the bottom of the left and right printer stand legs (two used)
Leg assembly - Side support for the printer - Does NOT include the foot assembly - (Two used)
Cross-brace - Brace that connects and supports the two stand legs (24-Inch)
Cross-brace - Brace that connects and supports the two stand legs (42-Inch) Hardware kit for printer stand - Includes screwdriver and screws - Used to assemble printer stand
24-inch printer stand and media bin kit for 800 series (Graphite Gray)
Right Cover and Control Panel
3
1
2
Ref
1
2
3
Part Number Description
C7779-60159
C7769-60160
C7769-60111
C7769-60112
C7769-60113
C7769-60114
C7769-60115
C7769-60116
C7769-60117
C7769-60118
C7769-60119
C7769-60120
C7769-60382
Right end cover (Black)
Trim kit - Installed between the main printer chassis and the left or right end covers (4 items in kit)
Front panel overlay (English)
Front panel overlay (Korean)
Front panel overlay (Taiwanese)
Front panel overlay (German)
Front panel overlay (French)
Front panel overlay (Spanish)
Front panel overlay (Italian)
Front panel overlay (Japanese)
Front panel overlay (Portuguese)
Front panel overlay (Chinese)
Control panel assembly - Includes ribbon cable and English overlay marked with Menu; Back; Enter; Can- cel and Form Feed/Cut
* Artikel sind obsolete, ohne Ersatz
10 HP Ersatzteile für DesignJet 500
+49 (0) 3723 / 6678 ‐ 0
Rollfeed and Spindle
1
3 2
Ref
1
2
3
Part Number
C7769-60380
C7769-60380
C2389A
C7769-60242
C7769-60243
Description
Rollfeed mount kit - Includes left and right housing
Rollfeed mount kit - Includes left and right housing
24-inch rollfeed spindle rod assembly for DesignJet 500/800 series - Includes spindle, hubs, and end caps
24-inch rollfeed spindle rod assembly - Includes spindle, hubs, and end caps - (C2389A)
42-inch rollfeed spindle rod assembly - Includes spindle, hubs, and end caps
Scan-Axis Motor
1
Ref
1
Part Number
C7769-60375
Description
Carriage (scan-axis) motor assembly - Includes cable
11 HP Ersatzteile für DesignJet 500
+49 (0) 3723 / 6678 ‐ 0
Service Station Holder and Belt Tensioner 2
3
1
Ref
1
2
3
Part Number
C7769-60156*
C7769-60173*
C7769-60176
Description
Service station bracket - Installed on right-side of service station
Interconnect PC board - Installed in right-side of printer
Belt tensioner kit - Keeps carriage belt tight - Includes pulley and pulley mount bracket
Service Station and Left Spittoon
2
1
Ref
1
2
Part Number
C7769-60149* C7769-60165
Description
Service station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer Left spittoon assembly - Contains absorbers which hold excess ink from printheads
* Artikel sind obsolete, ohne Ersatz
12 HP Ersatzteile für DesignJet 500
+49 (0) 3723 / 6678 ‐ 0
Top Cover and Media Deflectors
1
2
Ref
1
Part Number
C7779-60154
C7780-60154
C7769-60283 2
Description
Top cover assembly (Black) (24-Inch)
Top cover assembly (Black) (42-Inch)
Media deflector kit - Kit includes three deflectors - Installed in front of pinch-wheels - Only two will be used
Vacuum Fan
1
Ref
1
Part Number
C7769-60407
Description
Vacuum fan assembly - Mounts under the main printer chassis