Oxal Easy InjectMakes your injection easy going!

Oxal Easy Inject Get the horizontal barrier that works!

1. Open the cap of the Oxal Easy Inject

2. Fill the injection material into the Oxal Easy Inject

3. Close the cap of the Oxal Easy Inject

4. Pump by hand and controll the pressure

5. Open the valve

6. Test with a packer if its working, thepacker needs a minimum pressure of 2 bar

1

2

3

7. Finally connect the tube with the packer in the wall

8. Hold a constant pressure during the injection for a minimum of 2-3 minutes (max. 6 bar)

9. Go further packer for packer

End