How To Install Tennis Net
-
Upload
the-tennis-ball-courts -
Category
Sports
-
view
67 -
download
0
Transcript of How To Install Tennis Net
The tennis court surface is made out of different materials like
:- Natural or synthetic grass
:- clay
:- asphalt
:- acrylic etc.
Internal wind net post :-
All tennis net cables have loops at both ends. In internal wind type, you should cut the loop on one side and drag that side towards the wheel on the top of the net post.
Then insert the cut end into the hole of the internal wind
mechanism and start winding the handle until it reaches slightly
over 3’ at the center of the net.
External Wind Net Post :-
Hold the direct cable loop and drag it over the wheel on the top of the net
post.
Then connect the loop to the pin of external wind mechanism on
the crank assembly and start winding until it reaches slightly over
3’ at the center of the net.
Attach both sides of the loop of the net cable to the hook of the net post.
Place the lacing of the net in the marked lacing area of the net
post, if the area is not marked, wrap the lacing with equal space
distance..
Step - 4
Tie the bottom of the cable to the post and gently wind the net
upwards with the winding device until the net tape and securing tape
are positioned to each other with no gaps.
Step - 5
Note :- Measure under the net area that should be 42"
and the center of the net area should be more than 36"
As per ITF.