How to identify storage shelf type for netapp
-
Upload
ashwin-pawar -
Category
Technology
-
view
4.718 -
download
2
description
Transcript of How to identify storage shelf type for netapp
How to identify Storage Shelf type from NetApp AutoSupport?
In most cases if you have installed the Filer, then you know for sure which storage shelf type is
installed on the array. But, autosupport can be quite handy in displaying the details about the shelf
type for a NetApp storage system.
On the MyAutoSupport page | click ‘Raw AutoSupport Data’ | Click ‘Environment’ as shown in figure
below or if you have a copy of autosupport mailed to you, look for a section called ‘Environment’:
Following information can be easily traced if you slowly scroll through the environment page:
Shelf: 1
vendor identification=NETAPP
product identification=DS4243
product revision level=0152
Shelf bays with disk devices installed:
23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0
Small tip: Just do ‘CTRL’ and ‘F’ and use the keyword ‘product identification’. This would also take
you directly to the same place.
Prepared by,