How to enable DLNA on your L6200 L7200...
Transcript of How to enable DLNA on your L6200 L7200...
How to enable DLNA on your L6200/L7200 TV
1. Connect your TV to your wireless router 2. Press the ‘Menu” button on your remote 3. Go to “Network”, then “Network Device Setup” and press “OK” on your remote
4. Under Network Device Setup Menu and then select “Media Renderer Setup”
5. Media Renderer Setup Menu, then select “Installation” and press “OK on your
remote
6. Under the Installation Menu, select “On” to enable the “Digital Media Controller” feature; press “OK” on your remote
7. Press the “OK” button on your remote to change your “Device Name”.
8. Press the red button your remote to delete the current device name
9. Once you are done entering your device name, press the blue button on your remote that represents Done
10. Under the Device Name Setup Menu, select “Done” and press the “OK” button on
your remote to save your new device name and to continue with the installation process
11. Under Media Controller Setup Menu, keep Access Control “Off” for now (turning
it on allows you to restrict certain devices from using DLNA features on your TV); when done press “OK” on the remote
12. Under the Maximum Volume Setup Menu, keep the default to “50”, but you can raise or lower that number depending on your preference. When done press “OK” on the TV remote
13. Under TV Power on Control Menu, select either “Disable” or “Enable”; when you
have selected your preference, press “OK” on the remote (If “Enable” is selected, it will allow your TV to power on quickly, but it will be consuming more energy)
14. DLNA is now enabled on your TV