HOW TO DOWNLOAD AND INSTALL ANDROID AUTO™

Looks like you’re ready to take things up a notch. To ensure the best in-car experience possible, please follow these step-by-step instructions.

Android Auto is a trademark of Google Inc.

STEP 1

STEP 2

STEP 3

Open a web browser on your computer

• If your operating system is Windows, open Internet Explorer or your default browser.

• If you are using MAC OS X, open Safari or your default browser.

Go to the MyHyundai owner’s site at https://www.hyundaiusa.com/myhyundai

If you do not have a valid MyHyundai account, click Register.

To register, enter your name, email, and zip code.

SOFTWARE DOWNLOAD

STEP 4

Enter your Vehicle Identification Number (VIN) to finish your registration. The VIN is usually located on the driver’s side dashboard (viewable from the windshield) or inside the driver’s side door (on a sticker).

If you have a valid account, Click Log In.

Enter your MyHyundai account and password.

Click Next to finish the registration process.

STEP 5

STEP 6

Upon login, if you have more than one vehicle, select 2015 Sonata on the drop-down menu in the top left of the navigation bar.

Once you get to the Sonata 2015 page, select Downloads in the navigation then Android Auto on the Downloads drop-down. You will then be navigated to the Android Auto Download Page.

STEP 7 On the Android Auto Download Page

Check the box next to “I agree to the terms and conditions” to activate the download button.

Once the download button is active, click it to start the download.

Select Continue

STEP 8 MAC

WINDOWS

Once the download is complete, open the downloaded DMG file. By default, the file will be in your Downloads Folder.

Select Open on the system warning popup screen.

Double-click on the Hyudai icon, and continue to step 9.

Select Run to download and execute the Download Tool.

The Download Tool will be downloaded. This will not take long.

Select Yes to run the Download Tool.

STEP 9

STEP 10

Upon completing the download, the Download Tool will start.

Connect a compatible USB drive to your computer. Otherwise, the update process will not proceed until an appropriate USB drive is connected.

NOTE: USB drive should be formatted either FAT16 or FAT32, its available size should be greater than 1GB and less than 32GB.

STEP 11

If more than one USB drive is connected to your computer, please select the USB you want to use.

Vehicle software is being downloaded. DO NOT disconnect your USB drive until the download is complete.

STEP 12

STEP 13

The Download Tool will automatically extract the downloaded files.

Download Tool will then copy the extracted files to the USB drive.

STEP 14

STEP 15

STEP 1

Vehicle software has been downloaded to your USB drive.

Disconnect the USB drive from your computer.

Park your vehicle in a well ventilated area and start the engine. The update will take approximately 40 minutes.

VEHICLE SOFTWARE UPDATE

NOTE: Your radio presets may be lost during this update. Take note of them before you begin the update.

STEP 3

STEP 4

Press the SETUP key on your radio.

Scroll down and tap the System Info icon on the screen.

STEP 2 Connect the USB drive with the vehicle software on it to the USB port in your vehicle.

STEP 5 Tap Update at the bottom of the screen.

STEP 6

NOTE: There will be multiple occurrences where your display screen will go black. This is normal.

DO NOT turn off the engine during the update process.

STEP 7 Software Update is now complete, the system will automatically reboot to the Disclaimer or home screen.

Go to System Info and confirm that your S/W Version has been updated to: S/W VER. ST.LF.USA.E478.15430.

Navigate to Connectivity Settings in the Setup menu and turn On Enable Android Auto.

STEP 8

STEP 9

TROUBLESHOOTINGIf an error code or “Update Fail” message occurs, use a ballpoint pen to press the Reset button located next to the Tune knob.

NOTE: Hyundai shall not be liable for any issues caused by user software installation that fails to comply with the instructions provided.