7/31/2019 How Generate Graphical Reporter

1/10

HOW to generate a GRAPHICAL REPORTER

This example its make with the ARCOCAD 3.1

1- Import a CAD data of the part2- Align the part and sincronize it on the graphical viewer3- Measure some element (with the definition of the nominal value by the CAD data)

4 Click on this ICON for

open the dialog box

OPTION

5 Select the ratio button

ARCOCAD Reporter for

operate witn the new

Reporter

6 Conferm with OK

7/31/2019 How Generate Graphical Reporter

2/10

7 Open from the Quick

programmer the

Input/output page

8 Select the option

STANDARD

7/31/2019 How Generate Graphical Reporter

3/10

9 Select to OPEN

10 Select the device FILE

11 Select the format

VENDOR

12 On this list box select

GRAPHV

13 Select the ADD button

14 Verify if the GRAPHV

fomat and the status OPEN

appear on the interface

15 Conferm with OK

On the Part program area

appear the command

DISPLY/STOR,V(GRAPHV)

7/31/2019 How Generate Graphical Reporter

4/10

16 Select on Program

Text icon17 Select REPORT

VIEW

18 Insert the name of the

first report page

20 Conferm with APPLY

22 Select on the Icon

Feature Output

21 From the Quick

programmer select again

the Iput/Output page

19 Select from this list the kind of report , for

the test select CAD model landscape.XMLT

Inj the part program are write the following

instruction:

TEXT/VIEWDEF,'FIRST PAGE OF MY REPORT'

7/31/2019 How Generate Graphical Reporter

5/10

26 Repeat the Otput for all the elements request on the Graphical Report

27- Exit with Cancel from the REPORT dialog box

23 Select the feature you would like to send

to the reporteron the Icon Feature Output

24 Insert here the value of upper

and lower tolerance

25 Push Apply to Confirme the

elemente and the tolerance.

7/31/2019 How Generate Graphical Reporter

6/10

28 Select on Quick Programmer

the Input/Output page

29 Select the

STANDARD Option

30 Select Close All on the Status

area

31 Select to ADD on the Report

Setting area

32 Verify if is present in this area

the command CLOSE ALL

33 Confirm with OK

Inside the part program must be

write DISPLY/OFF

7/31/2019 How Generate Graphical Reporter

7/10

38 - The Report will be generate automatically

34 Click on the Reporter ICON

35 On the ARCOCAD interface will

appear this Dialog Box36 Select with the graphical tool

the best position of the part inside

the CAD area

37 When the position of the part

inside the CAD area its fine, push

the button ACCEPT VIEW and wait

some seconds

7/31/2019 How Generate Graphical Reporter

8/10

39 Its possible to print the Report

39 Its possible to save aPDF file

40 Select FILE

41 Select EXIT

42 In this Working Area its possible to modify the

position the font and all the other function of the

Reporter

7/31/2019 How Generate Graphical Reporter

9/10

42 Click on the product logo for open the

following dialog box

43 Click on the preview for see again the

report page modify

44 Click on the PDF save

45 Insert the name of the PDF files

46 Click on File

47 Select Exit

7/31/2019 How Generate Graphical Reporter

10/10

49 Click on the SAVE for save the report format

on the ARCOCAD project

48 Click on the product logo for open the

following dialog box

50 Exit from the Reporter project

51 Your reporter project will be save inside the

ARCOCAD project and execute automatically at

the end or the part program run.