Hotboxx-i Brochure New

E1E10 LTD

Unit 1, South Fens, Enterprise Park,

Fenton Way, CHATTERIS

Cambridgeshire

PE16 6WA

TEL: +44 (0) 1354 692681 EMAIL: [email protected]

FAX: +44 (0) 1354 691614 WEB: www.e1e10.com

The Next Generation of

Intelligent Server Emulators

E1E10 LTD



Cambridgeshire

PE16 6WA


FAX: +44 (0) 1354 691614 WEB: www.e1e10.com

The HOTBOXX-i is the latest

server emulator from E1E10.

Combining a redesigned air path

with state of the art controls and

network capability, the

HOTBOXX-i offers the most

accurate and reliable test of

your data centre’s performance

HOTBOXX-i’s become even smarter when networked together. Via OrcaView

software, an entire data centre can be tested from your laptop. Heat loads can

be changed, temperature differences altered, and test start times and

durations pre-programmed.

OrcaView also records everything that HOTBOXX-i monitors – power

consumption (so that you can be sure of actual heat loads), fan speeds and air

volumes, air on and air off temperatures, plus up to five additional

temperatures outlets plus a humidity outlet per HOTBOXX-i.

PLUS

To be certain that your back up power supply can cope with a full load

changeover HOTBOXX-i also incorporates Automatic Transfer Switches,

allowing the emulator to maintain full load operation on “A” or “B” feed.

The HOTBOXX-i boasts a heat output of up to four kilowatts, and an airflow volume

of up to 1200m3/hr. This means that it can maintain a temperature difference from

inlet to outlet of 10ᴼC at full load.

HOTBOXX-i’s sophisticated controls mean that the temperature difference is true

and constant, the fan speed modulating automatically to maintain the Delta T

selected or it can be programed to differ during the tests.

E1E10 LTD



Cambridgeshire

PE16 6WA


FAX: +44 (0) 1354 691614 WEB: www.e1e10.com

The HOTBOXX-i sets a new

standard in server emulation

and data centre performance

and resilience testing. The

HOTBOXX-i offers:

• Full remote control and monitoring: control all the functions of the HOTBOXX-i and

examine monitored data without having to enter the test space.

• Automatic A/B Feed Changeover: allowing realistic load tests of backup/secondary

power supply systems.

• High Power Density: up to four kilowatts of heat from each 6U HOTBOXX-i unit.

• Plug and Play networking: daisy chain as many HOTBOXXi units together as

required – set up and run tests on an entire data centre from a laptop.

• Accurate, maintained Temperature Differences: step-less speed control of efficient

backward curved centrifugal fans (that pull air over the heater elements rather

than push it) delivers constant TD’s based on applied heat loads, exactly emulating

server behaviour

Hotboxx-i Brochure New

Documents

Transcript of Hotboxx-i Brochure New