Paper certified by:The Forest Stewardship Council (FSC) and the Sustainable Forestry Initiative (SFI)

Horizon™

self-contained 700 series Chewblet® ice machine

FeaturesHorizon Chewblet ice machine with up to 675 lb (306 kg) daily production of popular Chewblet ice

- automatically transport ice through a tube with RIDE™ technology from up to 75' (23 m) away

- soft, chewable, compressed nugget ice is preferred over cubes1

- Chewblet ice dispenses reliably from ice and beverage dispensers

- available with approximately 1" (25 mm) long standard Chewblet ice or optional 3/8" (9.5 mm) long Micro Chewblet ice

- environmentally responsible R404a refrigerant with zero ozone depletion potential

- water and energy efficient- quiet production without noisy harvest cycles

Durable, attractive ice machine- regular bearing inspection or replacement is not required- easy-to-read LED operating status and diagnostic display- smooth contours for aesthetically appealing appearance

Designed with sanitation in mind- Agion® silver-based antimicrobial product protection of key

ice and water contact components2- aluminum-bronze evaporator has antimicrobial properties- automatic self-flushing reduces water scale buildup- floatless, sealed design inhibits formation of biofilms- semi-automatic cleaning and sanitizing system

Agency approvals

Warranty

- 3 years parts and labor, 5 years compressor parts

AccessoriesHarmony™ conversion top kit for ice and beverage dispensers (listed on page 4)

Water filter kit (item# 00978957) See form# 9905 for details

Wall mount bracket (item# 00997098) See form# 3311 for details

Ice machine stand, height-adjustable (item# 00997080)

Timer to control one or two Horizon ice machines (item# 00967265) See form# 3311 for details

Longer ice transport tube (10'/3 m is standard) – Specify length: ____ ft/m in 5'/1.5 m increments

801 Church Lane | Easton, PA 18040, USA1.800.523.9361 | 1.610.252.7301 | follettice.com

Job

Item

Horizon 700 series ice machine

Use/applicationInstallation/mounting

Ice machine cooling Voltage/Hz Item number

with ice storage bin

top mounted

air115/60 HCD700ABT208-230/60 HCC700ABT

water115/60 HCD700WBT208-230/60 HCC700WBT

RIDEair

115/60 HCD700ABS208-230/60 HCC700ABS

water115/60 HCD700WBS208-230/60 HCC700WBS

with Follett Vision™ dispenser

RIDEair

115/60 HCD700AVS208-230/60 HCC700AVS

water115/60 HCD700WVS208-230/60 HCC700WVS

with ice and beverage dispenser (by others)

top mounted

air115/60 HCD700AHT*208-230/60 HCC700AHT*

water115/60 HCD700WHT*208-230/60 HCC700WHT*

RIDEair

115/60 HCD700AHS208-230/60 HCC700AHS

water115/60 HCD700WHS208-230/60 HCC700WHS

with drop-in dispenser (by others)

RIDEair

115/60 HCD700AJS208-230/60 HCC700AJS

water115/60 HCD700WJS208-230/60 HCC700WJS

* Requires Harmony top kit (see p 4)NOTE: For Micro Chewblet ice, replace second character (C) with an M e.g. HMD700ABT

Short form specification: Ice machine to be a Follett® Horizon Chewblet ice machine model ________________ [Insert size/series, condenser type & installation/mounting, from model number guide] capable of producing compressed nugget ice using an efficient, sanitary horizontal evaporator/auger system and delivering ice by a flexible wire reinforced, transport tube to ice storage bin,

 ice and water dispenser,  ice and beverage dispenser,  drop-in dispenser and provided with a stainless steel frame

and exterior, slide-out compressor/condenser with utility docking station, front-mounted unit status display, automatic self-flush, and semi-automatic cleaning & sanitizing system, plus all the features listed:

2 Form# 4095 700 series ice machine

Specification W1 Width 22.625" (57 cm)D1 Depth 24.25" (62 cm)H1 Height 21.125" (54 cm)Ventilation clearance air-cooled models only

Top mount – 1" (25.4 mm),RIDE – See pp. 5-6 for details

C1 Electrical 115 V, 60 Hz – HCD700 models

1 phase, 11 amps, requires dedicated 15 amp circuit, 6.5' (2 m) cord, NEMA 5-15 plug. If local code requires hard-wiring, separate disconnects also required.

C2 Electrical208-230 V, 60 Hz – HCC700 models

1 phase, 6.5 amps, requires dedicated 15 amp circuit, 6.5' (2 m) cord, NEMA 6-15 plug.If local code requires hard-wiring, separate disconnects also required.

C3 Ice transport tube See page 7 for detailsC4 Water inlet 3/8" OD push-in water inletC5 Drain 3/4" MPTC6 Ice bin signal cord for Vision applications onlyWater-cooled ice machine connections

C7 – 1/4" FPT condenser inlet, C8 – 1/4" FPT condenser outlet

Air temperature 50 -100 F (10 - 38 C)Water temperature 45 - 90 F (7 - 32 C)Water pressure 10 - 70 psi (69 - 483 kpa)Ice production at 70 F (21 C) ambient air, 50 F (10 C) inlet water

air-cooled – 675 lbs (306 kg), water-cooled – 665 lbs (302 kg)

Ice production at 90 F (32 C) ambient air, 70 F (21 C) inlet water

air-cooled – 525 lbs (238 kg), water-cooled – 535 lbs (243 kg)

Energy consumption90 F (32 C) air, 70 F (21 C) water

air-cooled models – 5.2 kWh, water-cooled models – 3.9 kWh per 100 lbs (45.4 kg) ice

Heat rejection air-cooled models – 8,850 BTU/hr, water-cooled models – 10,150 BTU/hr to water

Water consumption 12 gal (45 L) of potable water per 100 lbs (45.4 kg) of ice (per AHRI test standards) 12.5 gal (47 L) including periodic flushing

Water flow requirement for water-cooled models

140 gallons/100 lbs of ice (530 L/ 45.4 kg)

Approximate ship weight 190 lbs (86 kg)NOTE: For indoor use only

Dimensional drawing

W1 D1

H1

air intake

GG

HCD700A/W HCC700A/W

C1

C3

C6

C4C5

C7

C8

9"(23 cm)

2.56"(65 mm)

3.29"(84 mm) 7.1"

(18 cm)9.1"

(23 cm)

2.75"(70 mm)

C2

3 Form# 4095700 series ice machine 700 series ice machine

1 – Locating the ice machineHorizon self-contained Chewblet ice machines allow top-mounting or mounting in a base cabinet, on a wall or on a floor stand up to 75' (23 m) from the dispenser or ice bin with RIDE technology (10' (3 m) for Micro Chewblet ice). In-cabinet mounting (RIDE applications) require special attention to service access, unit ventilation and ice tube runs (see page 3-5).

Top mounting – ice & beverage dispensers (by others)

RIDE model – Follett low-profile Vision™ ice & beverage dispensers

Top mount on Follett ice storage bins

Important specifier notes: Important specifier notes: Important specifier notes:

1. Dispenser must be compatible with nugget ice. See page 4 for compatible ice & beverage dispenser models and top kit numbers.

2. Verify ceiling or soffit height to ensure sufficient top clearance.

1. See page 4-6 for critical clearance & venting requirements.

2. Ice transport tube shipped with Vision ice and beverage dispenser (Vision applications only).

1. See form# B300 for bin sizing.

2. Verify ceiling or soffit height to ensure top clearance.

3. Locate floor sink or grate & drains in front of storage bin.

4. Do not position bin drain lines to block Ice•DevIce™ bin cart.

RIDE model – ice & beverage dispensers (by others)

RIDE model – drop-in beverage dispensers (by others)

RIDE model – Follett ice storage bins

Important specifier notes: Important specifier notes: Important specifier notes:

1. Dispenser must be compatible with nugget ice. Compatible dispensers include those on page 4 as well as Servend MD150/175/200/250, SV175/200/250, MDH-402 and Coca-Cola Freestyle.

1. Compatible with the following dispensers: Cornelius 1522, 1722, 2323 and Lancer 2200, 2300, 23300.

2. Requires 12" (30 cm) of access space for installation on transport tube side.

1. See form# B300 for bin sizing.

2. Locate floor sink or grate & drains in front of storage bin.

3. Do not position bin drain lines to block Ice•DevIce bin cart.

4 Form# 4095 700 series ice machine

1 – Locating the ice machine (continued)

Top mounting – compatible ice & beverage dispensers*

Manufacturer Model NumberWidthin (cm)

Depth†in (cm)

Height**in (cm)

Harmony top kit – specify "F" for front facing, or "B" for backward facing units

Lancer dispensers

4500-22N 22.00 ( 56) 30.50 (78) 36.66 ( 93) HTL22SC-7F

4500-30N / Chewable ice dispenser 30.00 ( 76) 30.50 (78) 36.66 ( 93) HTL30SC-7F

FS-22N 22.00 ( 56) 30.50 (78) 41.28 (105) HTL22SC-7F

FS-30N 30.00 ( 76) 30.50 (78) 41.28 (105) HTL30SC-7F

FS-44N# 44.75 (114) 30.38 (77) 42.72 (109) HTL22SC-7F#

Cornelius dispensers

DB/ED/DF 150 series 22.00 ( 56) 30.75 (78) 35.63 ( 91) HTC22SC-7F

DB/ED/DF 175 series 24.50 ( 62) 30.00 (76) 35.63 ( 91) HTC24SC-7F

DB/ED/DF 200 series 30.00 ( 76) 30.95 (79) 35.63 ( 91) HTC30SC-7F

DB/ED/DF 250 series 30.00 ( 76) 30.95 (79) 39.63 (101) HTC30SC-7F

DB/ED/DF 300 series 44.38 (113) 30.00 (76) 39.63 (101) HTC44SC-7 (F or B)

FlavorFusion / Overload 30.00 ( 76) 33.00 (84) 41.00 (104) HTC30SC-7F-FF

IDC215 30.00 ( 76) 29.88 (76) 36.69 ( 93) HTC30SC-7F-IDC

IDC255 30.00 ( 76) 33.13 (84) 39.75 (101) HTC30SC-7F-IDC

Servend dispensers

MDH-302 42.75 (109) 30.50 (77) 35.16 ( 89) HTS44SC-7 (F or B)

*All approved dispensers can be filled with a RIDE model Horizon ice machine without a top kit. † Requires minimum 1" (25.4 mm) clearance between back of dispenser and wall. ** Net height after installation of top kit (excluding height of ice machine). # FS-44N consists of 2 separate 22" (55.9 cm) dispensers. A top kit is needed for each Horizon ice machine ordered.

2 – Undercounter/in-cabinet mounting

Cabinet details

Important specifier notes

Cabinet basemust be flat & free of obstructions(no lip or utilities to block removal)

Cabinet door opening 24"W x 22.25"H (61 cm x 57 cm) minimum

slidesout

1. Cabinet door opening must meet minimum size requirements shown and be free of obstructions to allow ice machine to slide out (no lip or utilities to block removal).

2. Cabinet base must be capable of supporting ice machine and allow ice machine to rest flat on cabinet bottom.

3. No counter supports, electric or plumbing can run in front of the ice machine.

5 Form# 4095700 series ice machine 700 series ice machine

3 – Undercounter/in-cabinet mounting and ventilation

Using Follett supplied grilles

Horizon ice machines can be installed undercounter/in-cabinet to fill bins or dispensers using RIDE technology. Care must be taken to ensure proper cabinet venting to avoid recirculation of hot air. Improper venting can cause ice machine outages.

22.25"(57 cm)

min.

24.5"(62 cm)

min.

drain

cabinet door

ice transport tubeHorizonice machine

suppliedgrilles

minimum 1/4" per foot(2 cm per meter)pitch toward icemakersecure to prevent dipsand traps from forming

water

electric

18" (46 cm) min.

see dispenserspecification

sheet for installation

requirements

12" (30 cm) minimumbetween icemakerand dispenser

must mate directly to air intake gasket

exhaust

air in

Horizon ice machine

completed installation with gasket and door in place –

side view

Front

locatingcutout

24.5" (62 cm) min.

22.25"(57 cm) minimum

cutout for supplied air intake grille

supplied air intake grille

18"W x 14"H (46 cm x 36 cm)

bottom of ice machine

side of ice machine

cutout

2" (50 mm)

2" (50 mm)

cabinet doordoor & gasketmust matedirectly

Important specifier notes for using Follett supplied grilles:1. The supplied exhaust grille must be located at least

18" (46 cm) from the supplied air intake grille (exhaust air must not recirculate with intake air).

2. Cabinet interior must be open to allow for unrestricted exhaust air flow.

3. Ice transport tube needs minimum 1/4" per foot (2 cm per meter) pitch toward ice machine and should be secured to prevent dips and traps from forming.

4. Cabinet door must mate directly to air intake gasket.

5. Cabinet interior must provide a minimum clear space of 24.5" deep (62 cm) by 22.25" high (57 cm).

6. Cutout for supplied grilles must meet minimum size requirements shown above.

7. Utilities should be conveniently located as shown.

6 Form# 4095 700 series ice machine

3 – Undercounter/in-cabinet mounting and ventilation (continued)

Using grilles by others/alternate cabinet ventilation

Cabinets with ventilation or louvers other than those provided require special consideration to provide proper ventilation. Recirculation of hot air will reduce ice machine performance and can cause ice machine outages.

grilles by others/alternate cabinet ventilation

all counter ventilation within 18" (46 cm) of air inlet must be blocked to prevent exhaust-air recirculation

cabinet doormust mate directly to air intake gasket

exhaust

air in

exhaust

18" (46 cm) minimum

18" (46 cm) minimum

minimum open air space

Horizon ice machine

air intake gasket

cabinet door

door & gasketmust matedirectly

grilles by others/alternate cabinet ventilation

xx x x= sq in of open air space

= (# of openings)

minimum 160 sq in(1,032 sq cm) open air space

y n

nsideview

y

Important specifier notes for using grilles supplied by others/alternate cabinet ventilation:1. Exhaust must be at least 18" (46 cm) from air intake (exhaust

air must not recirculate with intake air).

2. Cabinet interior must be open to allow for unrestricted exhaust air flow.

3. Ice transport tube needs minimum 1/4" per foot (2 cm per meter) pitch toward ice machine and should be secured to prevent dips and traps from forming.

4. Ducting must be provided if cabinet door does not mate directly to air intake gasket.

5. Cabinet interior must provide a minimum clear space of 24.5" deep (62 cm) by 22.25" high (57 cm).

6. Grilles by others must meet minimum requirements for open air space shown above.

7. Utilities should be conveniently located as shown.

7 Form# 4095700 series ice machine 700 series ice machine

4 – Horizon ice machine mounting accessories

Optional wall mount bracket Optional machine stand Important specifier notes:

22.0"(59 cm)

25.5"(65 cm)23.0"

(58 cm) 

13.0"(33 cm)

18.7"(47 cm)

22.2"(56 cm) 16.5"

(42 cm)

6.8"(17 cm)

1. For secure wall mounting, specify optional wall mount bracket.

2. Wall and fasteners must support the weight of the ice machine, bracket, supply water and ice. Use of a backing board may be required with hollow wall construction.

3. Machine stand mounting adds 6.8" (17 cm) to height of ice machine.

4. No dips in tube routing allowed.

5. Ice transport tube needs minimum 1/4" per foot (2 cm per meter) pitch toward ice machine and should be secured to prevent dips and traps from forming.

5 – Horizon ice tube runs - specifier guidelines

Long tube runs for RIDE remote ice delivery equipment

1/4"1'

maximum 2' (61 cm)beverage

dispenser

wall-mountedicemaker

support straps

transport tube slope(toward icemaker)

(2 cm per meter)

minimum of 6" (15 cm)

turn/cornerradius

ice transport tube –1 3/16" OD,2 1/8" OD with insulation

Important specifier notes:

1. 75' (23 m) maximum ice transport tube run (10' (3 m) for Micro Chewblet ice).

2. Tubing routing bends must have a 6" (15 cm) radius or larger.

3. If not supported from underneath, secure insulated ice transport tube at least every 2' (61 cm) to prevent dips or traps.

4. Relative humidity levels above 80% in areas where the ice machine or ice transport tube are located may produce excessive condensation that will cause water damage.

5. Contact factory for recommendations on running tubing through a decorative soffit or chase.

700 series ice machine

801 Church Lane | Easton, PA 18040, USA1.800.523.9361 | 1.610.252.7301 | follettice.com

Form #4095 7/12© 2012 Follett Corporation

Ice production – 700 series, air-cooled

Inlet water temperature F (C)

Ambient air temperature F (C)

60 (16) 70 (21) 80 (27) 90 (32) 100 (38)

24 h

our

ice

pr

oduc

tion

lbs/

kg

50 F (10 C) 740 (336) 675 (306) 644 (292) 586 (266) 565 (256)

60 F (16 C) 714 (324) 673 (305) 618 (280) 559 (254) 529 (240)

70 F (21 C) 651 (295) 643 (292) 589 (267) 525 (238) 512 (232)

80 F (27 C) 649 (294) 609 (276) 561 (254) 506 (230) 478 (217)

90 F (32 C) 600 (272) 583 (264) 519 (235) 499 (226) 441 (200)

Ice production – 700 series, water-cooled

Inlet water temperature F (C)

Ambient air temperature F (C)

60 (16) 70 (21) 80 (27) 90 (32)

24 h

our

ice

pr

oduc

tion

lbs/

kg

50 F (10 C) 672 (305) 665 (302) 660 (299) 656 (298)

60 F (16 C) 600 (272) 597 (271) 584 (265) 582 (264)

70 F (21 C) 544 (247) 541 (245) 539 (244) 535 (243)

80 F (27 C) 521 (236) 515 (234) 506 (230) 504 (229)

90 F (32 C) 506 (230) 504 (229) 501 (227) 500 (227)

Agion is a registered trademark of Sciessent LLC. 1 Independent third party studies. Contact Follett for details. 2 Disclaimer: Antimicrobial protection is limited to the treated components and

does not treat water or ice.Horizon, RIDE, Vision, Ice•DevIce and SafeCLEAN are trademarks of Follett Corporation.Chewblet and Follett are registered trademarks of Follett Corporation, registered in the US.Follett reserves the right to change specifications at any time without obligation. Certifications may vary depending on country of origin.