HiROSS

i J

Centrifugal Separation

Cast Separators

Centrifugal Separators

Why Use A Centrifugal Separator?

The aftercooler in a compressed air system performs two basic functions: (1)Lowers the compressed air or gas temperature (2) Condenses water vapor. It isthis condensed water which can cause system problems. The most effective(99%+at rated flows) method of removing condensed water from a system is thecentrifugal type separator.

The Separation Process:

The entering moisture laden air is forced to pass through directional impellarswhich spin the air around the separator body. Droplets of water are impinged onthe separator wall by centrifugal force. Maximum velocity is reached near thebottom of the lower chamber where a "Vortex" is formed. The water dropletscoagulate and drain from the separator while the air travels up through the"Vortex" at a reduced velocity and exits the separator.

Design Benefits:

The Hiross centrifugal separators offer several outstanding features withcapacities to 25,000 scfm.

a) High separation efficiency

b) Low pressure drop

c) Minimum 200 psi rating as standard

Cast Separators: (SOI to S03)

Designed in three (3) sizes with capacities up to 550 SCFM, @ 100psig, thesecast aluminum separators feature a unique patented locking (Quick Loc)system whicheliminates any possibility ofopening the separator while it isunderpressure; yet permits dismantling, without tools, for inspection and cleaningwhen the system isshut downformaintenance. Acomputer designedcentrifugeand anti re-entrainment baffle are both removable for inspection and cleaning.Air and drain connections are all NPT. Standard pressure rating is 230 psig.

r

r

For Compressed Air Systems

Fabricated Separators: (S04 to S15):

These units are offered in two configurations: Horizontal or pipeline type,where the inlet and outlet connections are horizontal to the body; Verticalwhere the inlet connection is vertical, entering the top of the separator. Bothconfigurations are fabricated from heavy gauge steel providing dependableoperation and a long service life. The centrifuge is cast aluminum and welded inplace ensuring no by-pass. All units are constructed in compliance with ASMEcodes of practice. Standard units are rated at 200 psig working pressure with oneinch NPT drain connection. Consult factory for higher pressures and specialmaterials. Capacity in this range is 900 scfm to 25,000 scfm @ 100 psig.

Performance:

Hiross separators offer an extremely high efficient condensate removal topressure drop ratio. At rated capacity, the Hiross units will remove more than99%of the moisture condensed. Pressure drops can be found in the chart below.

Centrifugal SeparatorsPressure Drop

cm r>

Air

tt m io s ca.a]'~ "? c\

Flow -iooo SCFM

100 PSIG

Accessories:

Hiross external drain traps are available for all separators. These trapsfeature a unique manual blow down which enables the trap to be cleanedinservice. Pressures are available to 1,000 psig on external traps.

SA010

Horizontal

Vertical

SAC 120 SAC 100

Dimensions:

S01C-S03C S04H-S15H S04V-S09V

Standard Horizontal

Model CapacitySCFM

HeightH

WidthW C

Air ConnectionsWeight(Lbs.)

Recom.

DrainTrapIn Out

SOICBOHOS02CB0H0

100

300

9-3/413-3/4

3-1/24-13/32

8-3/412-1/2

3/4 NPT1-1/2 NPT

3/4 NPT1-1/2 NPT

2

4

SAC 120SAC 120

S03CB0H0S04HAMH0

550900

21-3/426

5-25/3214-3/4

20 3 3219-1/4

2 NPT

2-1/2 FLG2 NPT

2-1/2FLG1256

SAC 120SAC 120

S4AHAMH0S05HAMH0

1,4001,500

2934

16

20

21-1/425-7/8

3FLG4 FLG

3 FLG4 FLG

85120

SAC 120SAC 120

S06HAMH0S07HAMH0

2,8003,600

38-3/442

22

2328-3/430-1/2

5 FLG6 FLG

5 FLG6 FLG

200250

SAC 120SAC 120

S08HAMH0S09HAUH0

3,9005,800

45-3/450-1/4

26

3033-3/436-3/4

8 FLG8 FLG

8 FLG8 FLG

350400

SAC 100SAC 100

S10HAUH0S11HAUH0

6,8007,800

58-3/466-1/2

3034-1/2

4349-1/4

8 FLG14 FLG

8 FLG8 FLG

750900

SAC 100SAC 100

S12HAUH0S13HAUH0

10,20014,000

69-1/287-1/8

36-1/244-1/2

51-3/464-1/4

14 FLG18 FLG

8 FLG10 FLG

11002000

SAC 100SAC 100

S14HAUH0S15HAUH0

17,00025,000

96-3/4120-1/2

50

5770-1/489-3/4

20 FLG24 FLG

12 FLG12 FLG

31004200

SAC 100SAC 100

Standard VerticalS04VAMH0 900 37-1/8 13-1/16 32-1/2 2-1/2 FLG 2-1/2 FLG 64 SAC 120

S4AVAMH0S05VAMH0

1,4001,500

39-5/845-1/2

13-3/415-1/8

34-3/839-1/2

3 FLG4 FLG

3 FLG4 FLG

86

132SAC 120SAC 120

S06VAMH0S07VAMH0

2,8003,600

48-5/851-1/8

18-1/82a 1/8

41-7/843-7/8

5 FLG8 FLG

5 FLG6 FLG

175

225

SAC 120SAC 120

S08VAMH0S09VAUH0

3,9005.800

55-1/858-7/8

21-3/423-3/4

46-5/849-3/8

10 FLG10 FLG

8 FLG8 FLG

330380

SAC 100SAC 100

'B' in model'A' in model

Drain conn

Drain conn

no. - 230 psig mawpno. - 200 psig mawp- V2" NPT Models SOI -S03- 1" NPT Models S04-S15

S04 and larger are also available for high pressureand special materials. Consult factory.

HiROSS INC.Quality Compressed Air Products for over 25 Years

P.O. Box 290 L.P.O. 2107 Liberty Dr.Niagara Falls, New York 14304

Tel. (716) 283-6464, Telex 64-6305

HIROSS Companies inAustralia, Austria, Canada, W. Germany, Italy, S. Africa,Spain, Sweden, Switzerland, United Kingdom, U.S.A.

Authorized Distributor:

2550 Dunwin Drive

Mississquga Ontario

L5L 1J5 Canada

Tel. (416) 828-5530, Telex 065-24730

Copyrightc 1987 Hiross Inc. in accordance with our established policy of constant productimprovement the specifications and dimensions contained herein are subject to changewithout notice.

Ail Rights Reserved.

Printed in U.S.A.BuDetin No. CS/0987/3.0 NP

Other HIROSS Products:

* 1

*

1

m* J

ftoss'i

CLOSED CIRCUIT WATERCOOLER

DRAIN TRAPS

OIL COOLERS

AIRCOOLED AFTERCOOLERS