Hilti HIT-HY 10 PLUS - The Home Depot ??Setting Details of Hilti HIT-HY 10 PLUS with reinforcement...

download Hilti HIT-HY 10 PLUS - The Home Depot ??Setting Details of Hilti HIT-HY 10 PLUS with reinforcement bars HIT_HY10_PLUS_414644_V02_2012:HIT HY 10 15.01.2012 12:57 Uhr Seite 4 ...

of 12

  • date post

    06-May-2018
  • Category

    Documents

  • view

    216
  • download

    2

Embed Size (px)

Transcript of Hilti HIT-HY 10 PLUS - The Home Depot ??Setting Details of Hilti HIT-HY 10 PLUS with reinforcement...

  • 2x4

    6 7 9

    2x 330ml / 11.1 fl.oz. 3x 500ml / 16.9 fl.oz.

    1

    23

    8

    12tgel

    10

    13tcure

    12

    81010

    532

    1

    2x

    32x

    2

    13

    45min

    20

    42.51.5

    minmin

    30

    14Tmax

    Hilti HIT -HY 10 PLUS

    4

    4x

    76

    1

    23

    8

    10

    9

    2x 330ml / 11.1 fl.oz. 3x 500ml / 16.9 fl.oz.

    tgel 12

    11

    tcure 13

    12

    81010

    532

    1 3

    4x 2

    4x

    13

    45min

    20

    42.51.5

    minmin

    30

    Tmax 14

    HASREBAR

    HAS

    4

    2x 3

    2x 2

    2x3/4 rodand#6 rebar

    5

    11

    HIT_HY10_PLUS_414644_V02_2012:HIT HY 10 15.01.2012 12:57 Uhr Seite 1

  • df

    hef

    do

    Tmax

    hmin

    = h0

    Inch SizesRod Diameter

    d in. 3/8 1/2Setting DetailDrill bit diameter d0 in. 7/16 9/16

    Embedment Depth hef in. 2 1/4 - 4 1/2 3 - 6

    Max. Tightening torque Tmax ft-lb 15 20

    Diameter of clearance hole df in. 7/16 9/16

    Min. base material thickness hmin in. hef + 2 in. hef + 2 in.

    5/8

    3/4

    3 3/4 - 7 1/2

    50

    11/16

    hef + 2 in.

    The holes must be filled about 2/3 full.

    3/4

    7/8

    4 1/2 - 9

    105

    13/16

    hef + 2 in.

    HIT-RB cleaning brush d in. 7/16 9/16 3/4 7/8

    Metric SizesRod Diameter

    d mm M 10 M 12Setting Detail

    Drill bit diameter d0 12 14

    Embedment Depth hef 60 - 115 75 - 150

    Max. Tightening torque Tmax 20 27

    Diameter of clearance hole df 12 14

    Min. base material thickness hmin hef + 50 mm hef + 50 mm

    M 16

    18

    95 - 190

    68

    18

    hef + 50 mm

    The holes must be filled about 2/3 full.

    M 20

    22

    115 - 230

    142

    22

    hef + 50 mm

    HIT-RB cleaning brush d 12 14 18 22

    mm

    mm

    mm

    mm

    mm

    Nm

    d mmElement diameter 10 12 16 20

    Setting Details of Hilti HIT-HY 10 PLUS with threaded rod HAS

    Hilti HIT -HY 10 PLUS

    HIT_HY10_PLUS_414644_V02_2012:HIT HY 10 15.01.2012 12:57 Uhr Seite 2

  • Characteristic

    Anchor Rod Size

    Drill Bit Diameter

    Effective Embedment Depth

    Required Screen

    Tightening Torque

    Approximate Fastening perCartridge

    Filling Volume

    MD 2500

    UnitsHollow Concrete Masonry Clay Brick with Holes

    HAS Rod HAS Rod

    Minimum Hole Depth

    ED 3500

    dbit

    h0

    hef

    Tmax

    in.

    in.

    in.

    in.

    mm

    ft-lb

    SmallMedium

    ml

    Approx.number of

    trigger pulls

    Approx.number of

    trigger pulls

    1/4 5/16 3/8 1/2 5/16 3/8 1/2

    1/2 5/8 5/8 11/16 5/8 5/8 7/8

    33/4

    31/82

    Through face cell

    12 x 50 16 x 50 16 x 50 18 x 50 16 x 85 16 x 85 18 x 85

    2.2 2.2 3.0 4.5 2.2 3.0 4.5

    24 16 16 9 8 8 538 25 25 15 13 13 8

    12 18 18 30 35 35 55

    2 3 3 5 6 6 9

    3 4 4 7 8 8 12

    Inch Sizes

    Characteristic

    Anchor Rod Size

    Drill Bit Diameter

    Effective Embedment Depth

    Required Screen

    Tightening Torque

    Approximate Fastening perCartridge

    Filling Volume

    MD 2500

    UnitsHollow Concrete Masonry Clay Brick with Holes

    HAS Rod HAS Rod

    Minimum Hole Depth

    ED 3500

    dbit

    h0

    hef

    Tmax

    mm

    mm

    mm

    mm

    mm

    Nm

    SmallMedium

    ml

    Approx.number of

    trigger pulls

    Approx.number of

    trigger pulls

    95

    8050

    Through face cell

    12 x 50 16 x 50 16 x 50 18 x 50 16 x 85 16 x 85 18 x 85

    3 3 4 6 3 4 6

    24 16 16 9 8 8 538 25 25 15 13 13 8

    12 18 18 30 35 35 55

    2 3 3 3 5 5 5

    3 4 4 4 7 7 7

    Metric Sizes

    6 8 10 12 8 10 12

    12 16 16 18 16 16 18

    Setting Details of Hilti HIT-HY 10 PLUS with HAS

    Tmax

    Hilti HIT -HY 10 PLUS

    HIT_HY10_PLUS_414644_V02_2012:HIT HY 10 15.01.2012 12:57 Uhr Seite 3

  • Hilti HIT -HY 10 PLUS

    d0

    d

    hef = h0hmin

    US Inch reinforcement bar sizesSetting Parameter Symbol Unit # 3 # 4

    Bar Diameterd in. 3/8 1/2

    Setting DetailDrill bit diameter d0 in. 1/2 5/8

    Embedment Rangehef,min - hef,max

    hef in. 2 1/4 - 4 1/2 3 - 6

    Min. base material thickness hmin in. hef + 2 in. hef + 2 in.

    # 5

    5/8

    3/4

    3 3/4 - 7 1/2

    hef + 2 in.

    The holes must be filled about 2/3 full.

    # 6

    3/4

    7/8

    4 1/2 - 9

    hef + 2 in.

    Metric reinforcement bar sizesSetting Parameter Symbol Unit 10 12 16

    Bar Diameterd mm 10 12 16

    Setting DetailDrill bit diameter d0 mm 14 16 20

    hefEmbedment Rangehef,min - hef,max

    mm 60 - 115 75 - 150 95 - 190

    Min. base material thickness hmin mm hef + 50 mm

    The holes must be filled about 2/3 full.

    20

    20

    25

    115 - 230

    Canadian reinforcement bar sizesSetting Parameter Symbol Unit 10 M

    Bar Diameterd mm 10

    Setting DetailDrill bit diameter d0 in. 9/16

    Embedment Rangehef,min - hef,max

    hef mm 60 - 115

    Min. base material thickness hmin mm hef + 50 mm

    The holes must be filled about 2/3 full.

    15 M

    15

    3/4

    95 - 190

    hef + 50 mm

    HIT-RB cleaning brush d in. 1/2 5/8 3/4 7/8

    HIT-RB cleaning brush d mm 14 16 20 25

    20 M

    20

    1

    115 - 230

    hef + 50 mm

    HIT-RB cleaning brush d in. 9/16 3/4 1

    Setting Details of Hilti HIT-HY 10 PLUS with reinforcement bars

    HIT_HY10_PLUS_414644_V02_2012:HIT HY 10 15.01.2012 12:57 Uhr Seite 4

  • Hilti HIT -HY 10 PLUS Adhesive anchoring system for fastenings in concrete and masonryPrior to use of product, follow instructions for use and recommended safety precautions.Check expiration date: See expiration date imprint on foilpack manifold. (Month/Year). Do not usean expired product.Foil pack temperature: Must be between 41F and 104F (5C - 40C) when in use.Base material temperature at time of installation: Must be between 32F and 104F (0C - 40C).Exception in solid clay brick: between 41F and 104F (+5C and 40C). Instructions for transport and storage: Keep in a cool, dry and dark place between 41F to 77F(5C - 25C).Material Safety Data Sheet: Review the MSDS before use.

    Installation instructions: Follow the illustrations on page 1 and 2 for the sequence of operationsand refer to tables for setting details. For any application not specifically covered by this docu-ment, contact Hilti. Drill hole with a hammer-drill using an appropriately sized carbide drill. For holes drilled

    in concrete use the rotation hammer mode, for hollow base materials rotation mode only.For holes drilled with other drill types contact a Hilti representative.

    Clean hole. Just before setting an anchor/rebar, the hole must be cleaned of water, dust and debris by the cleaning method described below:Solid base material: Blow - 4 strokes with Hilti blow-out pump with the nozzle extended to the back of the

    hole. Brush - 4 times with the specified brush size (brush borehole ) by inserting the

    round steel brush to the back of the hole with a twisting motion. Blow - 4 strokes with Hilti blow-out pump with the nozzle extended to the back of the

    hole. Note For 3/4 diameter rods and #6 Rebar: Blow - 2 strokes with oil-free compressed air (90 psi at 3.5 CFM (6bar at 6m/h)) with

    the nozzle extended to the back of the hole. Brush - 2 times with the specified brush size (brush borehole ) by inserting the

    round steel brush to the back of the hole with a twisting motion. Blow - 2 strokes with oil-free compressed air (90 psi at 3.5 CFM (6bar at 6m/h)) with

    the nozzle extended to the back of the hole.Hollow base material: Blow - 2 strokes with Hilti blow-out pump with the nozzle extended to the back of the

    hole. Brush - 2 times with the specified brush size (brush borehole ) by inserting the

    round steel brush to the back of the hole with a twisting motion. Blow - 2 strokes with Hilti blow-out pump with the nozzle extended to the back of the

    hole.Standing Water: The concrete in and around the drilled hole may be water saturated at thetime of adhesive injection. However, if standing water is present in the anchor hole, flush the hole with normal hose pressure until water runs clear, perform 3 brush insertions, flushagain until water runs clear and remove all standing water completely (i.e. vacuum, com-pressed air or other appropriate procedure). Prior to injection of anchor adhesive, blow outusing oil-free compressed air to achieve a relatively dry borehole surface.The hole must be free of dust, debris, water, ice, oil, grease and other contaminants priorto adhesive injection. Inadequate hole cleaning = poor load value!

    For hollow base material: Insert a mesh sleeve HIT-SC into the borehole! Insert foil pack in black foil pack holder. Never use damaged foil packs and/or damaged or

    unclean foil pack holders. Attach new mixer prior to dispensing a new foil pack (snug fit). Tightly attach Hilti HIT-RE-M mixer to foil pack manifold. Do not modify the mixer in any

    way. Make sure the mixing element is in the mixer. Use only the mixer supplied with theadhesive.

    Insert foil pack holder with foil pack into HIT-dispenser. Push release trigger, retract plunger and insert foil pack holder into the appropriate Hilti dispenser.

    Discard initial anchor adhesive. The foil pack is self-opening when dispensing begins. Do not pierce the foil pack manually (can cause system failure).Do not use the material from the first trigger pulls when a foil pack is first used, or whena new mixing nozzle is installed:-