Highlights Polinova 2013

13
1 HIGHLIGHTS POLINOVA TECHNOLOGIES 2013

description

 

Transcript of Highlights Polinova 2013

Page 1: Highlights Polinova 2013

1

HIGHLIGHTS

POLINOVA TECHNOLOGIES

2013

Page 2: Highlights Polinova 2013

2

Polinova has four main research areas:

High performance coating

Epoxy putty

Structural adhesives

Structural reinforcement with composite

Others secondary research areas are:

Tools for leakage control in pipe (2 prototypes developed)

Special coatings for subsea applications (laboratory research)

Pipe support manufacture in composite (in test at Petrobras)

Highlights

43 products ready

Page 3: Highlights Polinova 2013

3

The highlights of Polinova technologies are the use of nanoparticules and

chemical modifications of epoxy matrix to produce nanoepoxy structures.

The objectives of this research are improve the mechanical properties,

adhesion strength and chemical resistance of new generations of

Polinova’s products.

The new nanoepoxy adhesive and nanoepoxy coating will go to market in

2014.

Highlights

Page 4: Highlights Polinova 2013

4

Our Technical Team has more than 14 years of experience in modifications

of epoxy resin in partnership with Federal University of Rio de Janeiro

(UFRJ) and Petrobras. Furthermore, the project of nano modification of

epoxy products has 0.6 million dollars to apply in this research in two years

(FINEP financing).

Highlights

Page 5: Highlights Polinova 2013

5

Highlights

Different epoxy resins

Carbon nanotubesNano ceramics

Modifications withpolymers

Dispersion andsurface modification

Chemical reactions

Products fromhybrid technologies

Products fromchemical modification

Products fromphysic modification

Architecture of our technology

Page 6: Highlights Polinova 2013

6

Highlights

Actual stage of nanotechnologies

1- Matrix

2 epoxy matrix developed from physics modifications

6 epoxy matrix developed from chemical modifications

2 epoxy matrix developed from hybrid technology

2- Preliminary tests

Chemical resistance

Lap Shear and pull off (adhesion tests)

Tension tests

Page 7: Highlights Polinova 2013

7

Highlights

1- No modified epoxy resin

2- Physic modification

3- Chemical modification

4- Hybrid Technology

Cured samples to realize chemical test

and Lap Shear samples to test

Page 8: Highlights Polinova 2013

8

Highlights

Benefits of nanotechnologies in development by Polinova

1- Physic modifications:

improve abrasion resistance

improve chemical and corrosion resistances

improve toughening

2- Chemical modifications:

improve adhesion strength

improve mechanical properties in general

3- Hybrid Technologies:

Ultra High Performance Coatings, Adhesives, Epoxy Putty and

Composites

Page 9: Highlights Polinova 2013

9

Highlights

Some possible applications of Polinova’s nanotechnologies:

High strength adhesives for composites parts in aeronautic market

Special coatings to protect Pre-Salt equipments against wearing or

chemical attack

Intelligent coating to indicated specific situations

High performance epoxy matrix to produce fiber reinforcement

composites to use in automotive market, aeronautic, marine, subsea, etc.

Page 10: Highlights Polinova 2013

10

Highlights

Certifications

ISO 9001

Main Corporative Supplier Register in Brazil

Petrobras (CRCC)

Marinha do Brasil

ONIP / CadFor

Qualifications of products (Type Approval)

(Petrobras) 2 for epoxy putty + 2 for Novolac coatings

(Marinha do Brasil) 1 for epoxy putty

(SAC Votorantin) 3 for epoxy putty + 3 for coatings

(Instituto Adolfo Lutz - water and food contact) 1 for epoxy putty

Page 11: Highlights Polinova 2013

11

Highlights

Technologies in qualification process

(Petrobras) 4 coatings (1 with carbon nanotubes)

(Petrobras) 1 pipe support in composite

(Petrobras) 1 structural reinforcement composite for pipe

(National Oil Vargo) 1 nano adhesive to joint glass fiber pipes

(TSA) 1 coating for water pipe, drill pipe and tubing

(Vallourec Mannesmann) 2 coatings for drill pipe

(Instituto Adolfo Lutz) 1 coating for water and food

(Idutto) 2 epoxy sealants for subsea sensors

(Houston Distributor) 6 epoxy putty and 2 coatings in test

(Florida Distributor) 7 epoxy putty and 3 coatings in test

Page 12: Highlights Polinova 2013

12

Highlights

Others R&D projects that we are working now

(FMC Technologies) 1 insulation coating for subsea application

(Petrobras) 2 compact equipments to separated water and oil

Some opportunities not explored

(Soco Therm) test of 2 coatings

(Embraer / Helibras) test of 1 or 2 Hybrid adhesives

(Defense) development invisible coating for radar with nanotechnology

Page 13: Highlights Polinova 2013

13