AVSil Silica Sleeving Silicone Coated Fiberglass Sleeving/Tape
Adhesive Applications SILICONE ADHESIVE...
Transcript of Adhesive Applications SILICONE ADHESIVE...
™ApplicationsAdhesive Adhesive SILICONE ADHESIVE
TAPESThe adhesive solutions company.
Silicone Tape Products.....for EVERY Application
Splicing TapesAdhesive Applications Silicone Splicing Tapes offer the widest variety of products for splicing applications. Self-wound or linered fi lm tapes as well as transfer adhesives provide our customers opportunities for process optimization. Our splicing tapes are ideal for:
• In process splicing of silicone coated papers, fi lms, and textiles• Covering of idlers and in process rolls• Label stock, adhesive transfer and other applications
AerospaceAdhesive Applications Silicone Tapes are ideal for demanding and critical aerospace applications. Our silicone tapes are low outgassing and can withstand an extremely wide range of temperatures and environmental conditions. Our high performance silicone tapes are ideal for:
• Aerospace vehicles - both piloted as well as drones• Satellites and other demanding applications
Powder Coating and High Temperature MaskingAdhesive Applications High Temperature Silicone Tapes can handle the heat. With excellent adhesion and high temperature resistance, our silicone tapes are ideal for:
• Powder coating metal components and assemblies• High temperature paint masking and other demanding applications
ElectronicsAdhesive Applications Silicone Tapes offer clean removability and a wide temperature range for demanding electronics applications. Our silicone tapes are ideal for:
• Printed circuit (PC) board masking and plating• Print cartridge and surface protection - removes clean with no residue• Flexible heating elements, wire harness wrapping and other applications
MedicalAdhesive Applications Silicone Tapes are highly engineered. With consistent adhesion and clean, gentle removal from skin and wounds, health care professionals and patients are assured that our silicone tapes put the patient fi rst.....every time. Our tapes are ideal for:
• Skin contact dressings• Surgical drapes and other critical applications• Microfl uidics
™ApplicationsAdhesive Adhesive
The adhesive solutions company.ISO 9001 Registered Company
Adhesive Applications, Inc.41 O’Neill Street
Easthampton, MA 01027
www.adhesiveapps.com+1 413 527 7120
Toll Free U.S. 800 356 3572
SILICONE ADHESIVE TAPE | PRODUCT PORTFOLIO
Category Construction Color Thickness Product Code Page
SILI
CO
NE
TAPE
Single Sided Multi-purpose single sided silicone adhesive tapes balance adhesion to silicone substrates, chemical resistance and removal with no residue; cost effective with excellent tack and temperature performance.
Clear 1.0 mil PET S8511-2C 3 2.0 mil PET S8512-2C 4
Blue 1.0 mil PET S9511-2 5 2.0 mil PET S9512-2 6
Red 1.5 mil Silicone S3411-2 7 3.0 mil Silicone S580 8
Yellow 1.5 mil Silicone S5711-2 9 2.6 mil Silicone S5513 10
Green
1.0 mil PET S8511-2 11 2.0 mil PET S8512-2 12 1.5 mil Silicone S8512-2DL 13 5.0 mil PET S8515-2 14
Burgundy 1.0 mil PET S2802 15 2.0 mil PET S2822 16
Polyimide film 1.0 mil Film SP590 17 2.0 mil Film SP590-2 18
White Platers Film S583 19 Polysil Black Silicone S9911-2B 20
Double Sided High performance, high temperature, double coated silicone tapes. Excellent temperature resistance and adhesion; removes clean with no residue.
Clear 1.0 mil Silicone 1.0 mil PET 1.0 mil Silicone
S1001-1DC11 21
Green 1.5 mil Silicone 2.0 mil PET 1.5 mil Silicone
S8512-2DPDL 22
Silicone & Acrylic 60 oz/in SA1020 23 55 oz/in SA1060 24
Transfer Silicone transfer adhesives designed for high performance applications and resistance to extreme temperatures (-100°F to 500°F).
Conductive SCT20 25 1.0 mil 1.0 mil S1001-1 26 2.0 mil 2.0 mil S1001 27 3.0 mil 3.0 mil S1003 28 5.0 mil 5.0 mil S1005 29
Single Coated Tape
PolySil™ S8511-2C is a clear high tack polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.
Fine line definition
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S8511-2CPOLYSIL CLEAR SILICONE ADHESIVE TAPE
••••
1.50
1.00
Polyester (PET)Silicone
2.50
36
22
16825
180-60
350
0.038
0.025
0.064
10.00
624168
3
180
-51177
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
3
Single Coated Tape
PolySil™ S8512-2C is a high tack clear polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.
Fine line definition
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S8512-2CPOLYSIL CLEAR SILICONE ADHESIVE TAPE
••••
1.50
2.00
Polyester (PET)Silicone
3.50
45
38
16850
150-60
350
0.038
0.051
0.089
12.50
1077168
5
150
-51177
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
4
Single Coated Tape
PolySil™ S9511-2 is a blue high tack polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.
Fine line definition
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S9511-2POLYSIL BLUE SILICONE ADHESIVE TAPE
••••
1.50
1.00
Polyester (PET)Silicone (Blue)
2.50
36
22
16825
180-60
350
0.038
0.025
0.064
10.00
624168
3
180
-51177
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
5
Single Coated Tape
PolySil™ S9512-2 is a high tack blue polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.
Fine line definition
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S9512-2POLYSIL BLUE SILICONE ADHESIVE TAPE
••••
1.50
2.00
Polyester (PET)Silicone (Blue)
3.50
45
38
16850
150-60
350
0.038
0.051
0.089
12.50
1077168
5
150
-51177
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
6
Single Coated Tape
PolySil™ S3411-2 is a red high tack polyester (PET) tape withcontrolled adhesion and good conformability. The controlledlevel of crosslinking assures a proper balance of adhesion tosubstrates and chemical and temperature resistance.
Fine line definition
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S3411-2POLYSIL RED SILICONE ADHESIVE TAPE
••••
1.50
1.00
Polyester (PET)Silicone (Red)
2.50
36
22
16825
180-60
350
0.038
0.025
0.064
10.00
624168
3
180
-51177
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
7
Single Coated Tape
PolySil™ S580 is a red polyester (PET) crosslinked siliconeadhesive tape with controlled adhesion and goodconformability for sharp line definition in etching and platingoperations. The controlled level of crosslinking assures aproper balance of adhesion to substrates, chemicalresistance and clean removal with no residue. The tape isunique in that the adhesive system is translucent on thepolyester and allows the operator to make precisionalignments easily.
High tack for quick adhesion
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S580POLYSIL RED SILICONE PLATERS TAPE
••••
3.00
1.00
Polyester (PET)Silicone (Red)
4.00
42
40
16825
180-60
350
0.076
0.025
0.102
11.67
1134168
3
180
-51177
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
8
Single Coated Tape
PolySil™ S5711-2 is a yellow high tack polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.
Fine line definition
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S5711-2POLYSIL YELLOW SILICONE ADHESIVE TAPE
••••
1.50
1.00
Polyester (PET)Silicone (Yellow)
2.50
36
22
16825
180-60
350
0.038
0.025
0.064
10.00
624168
3
180
-51177
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
9
Single Coated Tape
PolySil™ S5513 is a yellow high tack polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.
High tack for quick adhesion
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S5513POLYSIL YELLOW SILICONE ADHESIVE TAPE
••••
2.60
1.00
Polyester (PET)Silicone (Yellow)
3.60
40
40
16825
180-60
350
0.066
0.025
0.091
11.11
1134168
3
180
-51177
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
10
Single Coated Tape
PolySil™ S8511-2 is a green high tack polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.
Fine line definition
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S8511-2POLYSIL GREEN SILICONE ADHESIVE TAPE
••••
1.50
1.00
Polyester (PET)Silicone (Green)
2.50
36
22
16825
180-60
350
0.038
0.025
0.064
10.00
624168
3
180
-51177
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
11
Single Coated Tape
PolySil™ S8512-2 is a high tack green polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.
Fine line definition
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S8512-2POLYSIL GREEN SILICONE ADHESIVE TAPE
••••
1.50
2.00
Polyester (PET)Silicone (Green)
3.50
45
38
16850
150-60
350
0.038
0.051
0.089
12.50
1077168
5
150
-51177
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
12
Single Coated Tape
PolySil™ S8512-2DL is a polyester (PET) film tape coatedwith a high temperature cross linked silicone adhesive. It islaminated to and protected by a clear PET release liner.Designed for die cutting and masking applications requiringhigh temperature resistance. The tape removes easily fromthe clear PET release liner.
High temperature resistant
Clean removal / no adhesive residue
Chemical and abrasion resistant
Ideal for die cutting, powder coating and high
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S8512-2DLPOLYSIL GREEN LINERED SILICONE ADHESIVE TAPE
••••
1.50
2.00
Polyester (PET)Silicone (Green)
3.50
44
39
16850
150-60
350
0.038
0.051
0.089
12.22
1106168
5
150
-51177
8/27/2018Rev
Polyester (PET)
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
A
13
Single Coated Tape
PolySil™ S8515-2 is a green high tack polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.
Fine line definition
Clean removal / no adhesive residue
Chemical and abrasion resistant
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S8515-2POLYSIL GREEN SILICONE ADHESIVE TAPE
•••
1.50
5.00
Polyester (PET)Silicone (Green)
6.50
40
38
168125
150-60
350
0.038
0.127
0.165
11.11
1077168
14
150
-51177
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
14
Single Coated Tape
PolySil™ S2802 is a burgundy colored splicing tape,formulated with a premium grade cross-linked siliconeadhesive for high initial tack on difficult to bond substrates.The tape features chemical and temperature resistance, aswell as good conformability.
Fast wet out time
High initial tack
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S2802POLYSIL BURGUNDY ULTRA TACK SILICONE ADHESIVE TAPE
•••••
2.00
1.00
Polyester (PET)Silicone (Burgundy)
3.00
40
36
16825
180-60
350
0.051
0.025
0.076
11.11
1021168
3
180
-51177
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
15
Single Coated Tape
PolySil™ S2822 is a burgundy colored splicing tape,formulated with a premium grade cross-linked siliconeadhesive for high initial tack on difficult to bond substrates.The tape features chemical and temperature resistance, aswell as good conformability.
Fast wet out time
High initial tack
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S2822POLYSIL BURGUNDY ULTRA TACK SILICONE ADHESIVE TAPE
•••••
2.00
2.00
Polyester (PET)Silicone (Burgundy)
4.00
48
44
16850
150-60
350
0.051
0.051
0.102
13.34
1247168
5
150
-51177
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
16
Single Coated Tape
PolySil™ SP590 offers optimum performance in electrical andthermal insulation. Continuous service temperature range is-100°F to 500°F (-73°C to 260°C) with short term, intermittentservice to 600°F (315°C). Provides clean removal in hightemperature masking applications.
High temperature resistant
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
Meets ASTM D5213 type 1 item A
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
SP590POLYSIL POLYIMIDE SILICONE ADHESIVE TAPE
•••••
1.50
1.00
PolyimideSilicone
2.50
26
22
16824
60-100
500
0.038
0.025
0.064
7.22
624168
3
60
-73260
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
17
Single Coated Tape
PolySil™ SP590-2 offers optimum performance in electricaland thermal insulation. Continuous service temperaturerange is -100°F to 500°F (-73°C to 260°C) with short term,intermittent service to 600°F (315°C). Provides clean removalin high temperature masking applications.
High temperature resistant
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
Meets ASTM D5213 type 1 item A
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
SP590-2POLYSIL POLYIMIDE SILICONE ADHESIVE TAPE
•••••
1.50
2.00
PolyimideSilicone
3.50
26
34
16848
60-100
500
0.038
0.051
0.089
7.22
964168
5
60
-73260
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
18
Single Coated Tape
PolySil™ S583 is a polyester film tape coated with a whiteopaque silicone adhesive, specifically compounded to resistplating bath chemicals in solder stripping and precious metalplating of finger contacts. The tape conforms to high circuitdensity patterns to provide clean line definition and resistundercutting. The tape can be removed without leavingadhesive residue, eliminating the need for subsequentsolvent scrubbing.
High performance silicone tape
Excellent conformability
Controlled adhesion level allows clean removal
High temperature, chemical resistant silicone
Fine line definition; ideal for high density andcomplex masking
Ideal for PC board masking during plating,precious metal plating, electrical insulation andsplicing silicone coated materials
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S583POLYSIL WHITE SILICONE ADHESIVE PLATERS FILM TAPE
•••••
•
2.60
1.00
Polyester (PET)Silicone
3.60
20
10
16825
180-60
350
0.066
0.025
0.091
5.56
284168
3
180
-51177
8/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
A19
Single Coated Tape
PolySil™ S9911-2B is a black high tack polyester (PET) tapewith controlled adhesion and good conformability. Thecontrolled level of crosslinking assures a proper balance ofadhesion to substrates and chemical and temperatureresistance.
Fine line definition
Clean removal / no adhesive residue
Chemical and abrasion resistant
Good conformability
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
S9911-2BPOLYSIL BLACK SILICONE ADHESIVE TAPE
••••
1.50
1.00
Polyester (PET)Silicone (Black)
2.50
36
22
16825
180-60
350
0.038
0.025
0.064
10.00
624168
3
180
-51177
C 07/24/2018Rev
PRODUCT SPECIFICATIONS
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
20
Double Coated Tape with Two Liners
PolySil™ S1001-1DC11 is a polyester (PET) film supporteddouble coated silicone adhesive tape designed for highperformance applications requiring chemical resistance,excellent bond strength and resistance to extremetemperatures. The silicone adhesive layers are coated onboth sides of a 1 mil PET film carrier, and protected by twofluorosilicone coated PET liners.
Bond well to many materials, including silicones
Chemical and temperature resistant
Performs in extreme temperatures
UV resistant
Passes (score 0) Primary Skin Irritation per ISO10993-10
Passes (score 0) Cytotoxicity per ISO 10993-5
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
S1001-1DC11POLYSIL DOUBLE COATED SILICONE ADHESIVE TAPE
•••••
•
1.00
1.00
Polyester (PET)Silicone
3.00
40
40
>168
25
180-60
350
0.025
0.025
0.076
11.11
1134>168
109
180
-51177
B 7/24/2018Rev
Polyester (PET)
1.00
Silicone
Polyester (PET)
0.025
PRODUCT SPECIFICATIONS
21
Double Coated Tape with Two Liners
PolySil™ S8512-2DPDL is a green, polyester (PET) filmsupported, double coated silicone adhesive tape. Theproduct is designed for high performance applicationsrequiring chemical resistance and excellent bond strength.The silicone adhesive layers are protected by twofluorosilicone coated PET liners.
Green color provides splice visibilty
Good bond strength to silicone surfaces
Clean removal without adhesive residue
Chemical and temperature resistant
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
S8512-2DPDLPOLYSIL GREEN DOUBLE COATED SILICONE ADHESIVE TAPE
••••
1.50
2.00
Polyester (PET)Silicone
5.00
40
36
>168
50
150-60
350
0.038
0.051
0.127
11.11
1021>168
219
150
-51177
B 7/24/2018Rev
Polyester (PET)
1.50
Silicone
Polyester (PET)
0.038
PRODUCT SPECIFICATIONS
22
Double Coated Tape with Two Liners
PolySil™ SA1020 is a double coated / double lineredpolyester (PET) tape with a silicone pressure sensitiveadhesive on one side and an acrylic pressure sensitiveadhesive on the other. SA1020 provides a solution forbonding silicone-based substrates to non-silicone materials.The silicone adhesive is designed to provide a strong bond toa variety of silicone and other low surface energy substrates,while the acrylic adhesive offers high adhesion to manymaterials.
Designed for bonding dissimilar materials
Excellent elevated temperature shear
UV and chemical resistant
Performs well in a wide temperature range
Silicone exhibits superior bonding to low surfaceenergy materials
Versatile, performance acrylic bonds to a widevariety of materials
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
SA1020POLYSIL SILICONE / ACRYLIC DOUBLE COATED ADHESIVE TAPE
•••••
•
2.00
1.00
Polyester (PET)Acrylic
5.00
60
48
168
25
180-40
350
0.051
0.025
0.127
16.67
1361168
109180
-40177
A 2/27/2018Rev
Kraft (White)
2.00
Silicone
Polyester (PET)
0.051
PRODUCT SPECIFICATIONS
23
Double Coated Tape with Two Liners
PolySil™ SA1060 is a double coated / double lineredpolyester (PET) tape with a silicone pressure sensitiveadhesive on one side and an acrylic pressure sensitiveadhesive on the other. SA1060 provides a solution forbonding silicone-based substrates to non-silicone materials.The silicone adhesive is designed for a strong bond tosilicone and other low surface energy substrates, while theacrylic adhesive offers high adhesion to a wide range ofmaterials and excellent heated shear properties.
Designed for bonding dissimilar materials
Excellent elevated temperature shear
UV and chemical resistant
Performs well in a wide temperature range
Silicone exhibits superior bonding to low surfaceenergy materials
Acrylic combines low surface energy adhesionand temperature resistance
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be true andaccurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
SA1060POLYSIL SILICONE / ACRYLIC DOUBLE COATED ADHESIVE TAPE
•••••
•
2.00
1.00
Polyester (PET)Acrylic
5.00
55
54
168
25
180-40
350
0.051
0.025
0.127
15.28
1531168
109180
-40177
A 2/27/2018Rev
Kraft (White)
2.00
Silicone
Polyester (PET)
0.051
PRODUCT SPECIFICATIONS
24
Transfer Adhesive - Double Liner
SCT20 electrically conductive silicone transfer tape isdesigned for demanding electronics, aerospace, medical andhigh temperature applications. The unique silicone pressuresensitive adhesive (PSA) conducts electricity anisotropicallythrough the adhesive thickness.
Primarily used for EMI/RFI applications, ESD pads andflexible circuits, SCT20 offers excellent conformability. Bondswell to silicone foam, plastics, metals, glass and compositesas well as a wide range of other materials.
Electrically conductive transfer adhesive
Bonds well to low surface energy materials
Performs well in extreme temperatures
Excellent chemical resistance
Ideal for aerospace, electronics and medicalapplications
Z-axis Volume Resistivity < 4 ohm-cm
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be trueand accurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
SCT202 MIL CONDUCTIVE SILICONE TRANSFER TAPE
•••••
•
PRODUCT SPECIFICATIONS
2.00
Silicone
32
14
>168-40
500
0.051
8.89
397
>168-40
260
A 8/20/2018Rev
Polyester (PET)
Polyester (PET)
25
Transfer Adhesive - Double Liner
PolySil™ S1001-1 silicone transfer adhesive is designed forhigh performance applications requiring chemical resistance,excellent bond strength and resistance to extremetemperatures (-100°F to 500°F). The 1 mil pressure sensitivesilicone adhesive is protected by two clear fluorosiliconecoated polyester (PET) film liners. S1001-1 bonds well tometals, silicone foam, most plastics and low energy surfacessuch as polyethylene and polypropylene.
Excellent chemical resistance
Excellent bond strength
Performs in extreme temperatures
UV resistant
Passes (score 0) Primary Skin Irritation per ISO10993-10
Passes (score 0) Cytotoxicity per ISO 10993-5
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be trueand accurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
S1001-1POLYSIL 1 MIL CLEAR SILICONE TRANSFER TAPE
•••••
•
PRODUCT SPECIFICATIONS
1.00
Silicone
40
40
168
-100
500
0.025
11.11
1134
168
-73
260
B 7/24/2018Rev
Polyester (PET)
Polyester (PET)
26
Transfer Adhesive - Double Liner
PolySil™ S1001 silicone transfer adhesive is designed forhigh performance applications requiring chemical resistance,excellent bond strength and resistance to extremetemperatures (-100°F to 500°F). The 2 mil silicone adhesive isprotected by two clear fluorosilicone coated polyester (PET)film liners. S1001 bonds well to metals, silicone foam, mostplastics and low energy surfaces such as polyethylene andpolypropylene.
Excellent chemical resistance
Excellent bond strength
Performs in extreme temperatures
UV resistant
Passes (score 0) Primary Skin Irritation per ISO10993-10
Passes (score 0) Cytotoxicity per ISO 10993-5
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be trueand accurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
S1001POLYSIL 2 MIL CLEAR SILICONE TRANSFER TAPE
•••••
•
PRODUCT SPECIFICATIONS
2.00
Silicone
54
40
168
-100
500
0.051
15.00
1134
168
-73
260
B 7/24/2018Rev
Polyester (PET)
Polyester (PET)
27
Transfer Adhesive - Double Liner
PolySil™ S1003 silicone transfer adhesive is designed forhigh performance applications requiring chemical resistance,excellent bond strength and resistance to extremetemperatures (-100°F to 500°F). The 3 mil silicone adhesive isprotected by two clear fluorosilicone coated polyester (PET)film liners. S1003 bonds well to metals, silicone foam, mostplastics and low energy surfaces such as polyethylene andpolypropylene.
Excellent chemical resistance
Excellent bond strength
Performs in extreme temperatures
UV resistant
Passes (score 0) Primary Skin Irritation per ISO10993-10
Passes (score 0) Cytotoxicity per ISO 10993-5
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be trueand accurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
S1003POLYSIL 3 MIL CLEAR SILICONE TRANSFER TAPE
•••••
•
PRODUCT SPECIFICATIONS
3.00
Silicone
64
40
168
-100
500
0.076
17.78
1134
168
-73
260
B 7/24/2018Rev
Polyester (PET)
Polyester (PET)
28
Transfer Adhesive - Double Liner
PolySil™ S1005 silicone transfer adhesive is designed forhigh performance applications requiring chemical resistance,excellent bond strength and resistance to extremetemperatures (-100°F to 500°F). The 5 mil silicone adhesive isprotected by two clear fluorosilicone coated polyester (PET)film liners. S1005 bonds well to metals, silicone foam, mostplastics and low energy surfaces such as polyethylene andpolypropylene.
Excellent chemical resistance
Excellent bond strength
Performs in extreme temperatures
UV resistant
Passes (score 0) Primary Skin Irritation per ISO10993-10
Passes (score 0) Cytotoxicity per ISO 10993-5
PRODUCT DESCRIPTION FEATURES & BENEFITS
PRODUCT CONSTRUCTION
Tested values are typical under standard conditions and are not intended to be used for specification development. Technical data is believed to be trueand accurate; Adhesive Applications recommends that the purchaser test for performance and fitness of use in all applications.
S1005POLYSIL 5 MIL CLEAR SILICONE TRANSFER TAPE
•••••
•
PRODUCT SPECIFICATIONS
5.00
Silicone
76
40
168
-100
500
0.127
21.12
1134
168
-73
260
B 7/24/2018Rev
Polyester (PET)
Polyester (PET)
29