REDUCE

Water, Fertilizer, Chemicals

& Labor

IMPROVE - Quality

& Increase Rounds

of Play

Variable Speed DC Motor Cool constant torque drive

Bleed valve for priming The bleed tubes will go to

a catch container

Discharge fitting w/ swivel & union disconnection

316 Stainless steel headand all fittings

Suction fittingw/ swivel union &disconnection

Fiberglass base w/stainless steel fasteners

Stroke adjustment knob0 to 100% - each head

Install to all types of pump stations

Fertigation Direct

www.turffeeding.comTurf Feeding Systems - Katy, Texas - USA

Model G2000 Dual Heads Two 30gal/hr

High Quality - Low Cost Fertigation

Save $10,000 annually

Sustainable Golf & Water Efficiency

G2000Laboratory accuracy and agriculture durability

Model G2000 Fertigation SystemDual Head Fertigation SystemProportional- controlled by water flow rate - Flow sensor controlledDual Heads - Two 30 gal /hr injection rate @ 150 psi

Heads and valves are 316 stainless steel.All hoses are industrial 300 psiSystem includes all fittings and connections to two tanks - Tanks not includedPower - 115 v AC @ 5 amps @60 hz- Also available at 240v 50hzIncludes an optical isolator to use pump station digital flow sensor

Turf Feeding Systems - Katy, Texas - USA - +1 832-321-3311 www.turffeeding.com mc@turffeeding.com

This new G2000 launches a next generation in golf fertigation systems. It brings together new pumps with accuracy and durability on seen until now.

We introduce precision industrial plunger pumps that have the best features that improve dependability and ease of service.

Accurate stroke adjustment to individual percent setting. This will give you accurate settings and repeatability.

The pump valves include swivels and union disconnect fittings The pump discharge and suction can swivel left or right depending on the the installation setup.

Service is important and all the valves have a swivel disconnect to access the cartridge valves in minutes.

The valves have teflon seals and don’t use teflon tape or thread sealer. It’s clean and simple to remove the pump check valves in minutes. The cartridge valves can be cleaned and serviced in minutes to get the fertigation system back on line and no need to send for replacment check valves. This reduces maintenance costs and down time.

The systems uses high quality industrial hose. It has an 300 psi working pressure.

This system uses only the best components, fittings and hoses.

Nutrient Injection SystemVariab le Sp eed

TORO

Bio P r o

F lo w S e n s o r

Suction lineFrom tank to injector (includes y-strainer)

In je c t io n L a n c e

A s s e m b lyIn c lu d e s :c h e c k v a lv e

Aut o Mode

Ma nual Mode

Contr ol M ode

Contr oller Power

DC Motor

D isch a rg e H o seP u s h - lo c k H o s e - 3 0 0 p s i W P

Ir r ig a tio n L in e

Model G2000

Fertigation System

Bleed valve

20

"H

igh

14

"W

ide

Fertilizer Tank

Suction Connection

Discharge Connection

Discharge to Irrigation

Fiberglass base

Proportional Variable Rate Injection

Dual Head - Two 30 gal / hr @ 150 psi

316 Sta in less Steel Heads & Valves

Components and Layout Drawing

Drawing Not to Scale

The system includes a ll the

components, hoses, connections

and controller for insta llation.

The system does not include

a flow sensor or tanks

P o w e r - 11 5 - 2 3 0 v s in g le p h a se

@ 6 0 /5 0 H Z @ 5 a m p s fu ll lo a d 11 5 v

Irrigation Line

Bulk Tank500-1,500gal

Bulk Tank500-1,500gal

Mix Tank50-150 gal

Add Soluble Fertilizer also.

minors, wetting agents or any combination - your choice of blends

Humates, microbes,

SubmersablePump to mix

Submersible pump with float to circulate bulk tanks for 30 minutes daily with timer

Your choice of blends for Greens

Bulk NPK for golf course and to add to mixer for Greens

G2000 Layout for Tanks and ConnectionsTanks are not included with system