H&H Trailers, LLC - R K Belt & · PDF filefor hauling your golf car or ATV. Standard stake...

HH&&HH TTrraaiilleerrss,, LLLLCC ALL STEEL MODELS CATALOG

Limited Warranty on Frame, Tongue, and Crossmembers

Topline Models: 3 Year C Series Models: 1 Year

Table of Contents

TOPLINE TRAILER MODELS

General Purpose & Utility Trailers: PAGE 2 ........... GOLF CAR TRAILER & OPTIONS PAGE 3 ........... SINGLE AXLE FLATBEDS PAGE 4 ........... ATV TRAILERS PAGE 5-5B ........... RAIL SIDE UTILITY TRAILERS PAGE 6-7 ........... SOLID SIDE UTILITY TRAILERS – SINGLE AND TANDEM AXLES PAGE 8-9 ........... UTILITY OPTIONS SECTION Flatbed & Tiltbed Trailers: PAGE 12 ........... FUEL TRAILERS PAGE 13 ........... HEAVY DUTY FLATBED TRAILERS PAGE 14 ........... INDUSTRIAL LINE FLATBED TRAILERS PAGE 15 ........... SPEED LOADER™ MX AND EX TILTBED TRAILERS PAGE 16 ........... HEAVY DUTY SPEEDLOADER™ EX TANDEM TILTBED TRAILERS PAGE 17 ........... GTL GRAVITY TILT FLATBED TRAILERS PAGE 18-22 ........... FLATBED AND TILTBED OPTIONS SECTION Dump Box Trailers: PAGE 24-24A ........... UTILITY DUMP BOX TRAILER & OPTIONS PAGE 25 ........... XL DUMP BOX TRAILERS & OPTIONS PAGE 26 ........... DB DUMP BOX TRAILERS & OPTIONS Deck-Over Trailers: PAGE 28 ........... HDL LIGHT DUTY HI-DECK TRAILERS & OPTIONS PAGE 29-30 ........... HI-DECK TRAILERS PAGE 31 ........... HI-DECK OPTIONS SECTION

C SERIES VALUE TRAILER MODELS PAGE 35 ........... C SERIES SOLID SIDE UTILITY TRAILERS & OPTIONS – SINGLE AXLE ONLY PAGE 36 ........... C SERIES HEAVY DUTY FLATBED TRAILERS & OPTIONS PAGE 37 ........... C SERIES SPEEDLOADER™ MX TILTBED TRAILERS & OPTIONS

PLEASE NOTE: H&H TRAILERS LLC STRONGLY RECOMMENDS HITCHING YOUR TRAILER TO YOUR TOW VEHICLE BEFORE LOADING! PHOTOS MAY SHOW OPTIONAL EQUIPMENT. MODELS AND OPTIONS ARE SUBJECT TO CHANGE.

H&H Trailers®, the wing logo, & SpeedLoader are registered trademarks of H&H Trailers LLC. ©201-20132 H&H Trailers LLC. All rights reserved.

AVAILABLE COLOR OPTIONS

CAT Black H&H Yellow H&H Grey John Deere Green

Sapphire Blue Signal Red Safety Orange

H&H TRAILERS LLC STRONGLY RECOMMENDS HITCHING YOUR TRAILER TO YOUR TOW VEHICLE BEFORE LOADING! PHOTOS MAY SHOW OPTIONAL EQUIPMENT. MODELS AND OPTIONS ARE SUBJECT TO CHANGE. H&H IA Steel Trailer – Page 2

H&H Golf Car Trailer

Lightweight, High Strength, and Low Cost This is H&H Trailers cost effective steel alternative to an aluminum trailer. A light, rigid tube chassis married to a solid, diamond plate steel floor makes this one great trailer for hauling your golf car or ATV. Standard stake pockets allow the addition of side boards for hauling clippings, mulch, and other lawn debris!

Model Description 58GOLFCAR ...............5x8ft steel deck flatbed, rear ramp gate

Available Options:

Spare Wheel& Tire – 20.5x8x10

Upgrade Rear Gate to a Bi-fold Gate

Standard Features • Rectangular tube frame and cross-members.

Nothing is more rigid for the weight! • Diamond plate steel floor gives you virtually

unlimited service life and less weight than wood flooring.

• Radius fenders with our custom steel fender backs keep it clean.

• Rock guard on fender fronts help guard against unwanted rock chips and add a little style to your new trailer.

• S-bend tube tongue allows trailer to pull level behind full size vehicles.

• 2" Posi-Lock coupler is easy to use, strong, and self-locking for your safety.

• Standard dual DOT approved safety chains are longer than other brands.

• Full LED DOT compliant lighting includes full wiring and trailer light plug with stop, turn, and taillights for safety. Wiring enclosed in conduit.

• 2000lb rated swivel-up jack for unhooking easily, even when loaded. Unhook and leave your load on the trailer.

• 1500lb GVWR allows you to carry more than a golf car. Heavy suspension allows you to haul more at once.

• 20.5x8x10 DOT approved tires on 5-bolt pattern steel wheels. Bigger, wider, and better on the road!

• Standard tube steel main truss ramp gate unit allows easy loading and unloading at any time.

• Heavy, gauge formed steel stake pockets on front and both sides. Great tie down points!

• Gate can also be laid forward onto deck for less wind drag when towing empty.

Trailer will come standard with LED lighting.



Sapphire Blue

Signal RedSafety Orange


H&H SH Heavy Frame Flatbed Trailer

Model Description Deck Width Deck Length SH 5 X 10F FLATBED .................. 5x 10’ Flatbed Heavy Frame, ramp gate ................................... 60” ...........................10’ SH 5 X 12F FLATBED .................. 5x 12’ Flatbed Heavy Frame, ramp gate ................................... 60” ...........................12’ SH 5 X 14F FLATBED .................. 5x 14’ Flatbed Heavy Frame, ramp gate ................................... 60” ...........................14’

SH 5.5 X 10F FLATBED ............... 5.5x 10’ Flatbed Heavy Frame, ramp gate ................................ 66” ...........................10’ SH 5.5 X 12F FLATBED ............... 5.5x 12’ Flatbed Heavy Frame, ramp gate ................................ 66” ...........................12’ SH 5.5 X 14F FLATBED ............... 5.5x 14’ Flatbed Heavy Frame, ramp gate ................................ 66” ...........................14’

SH 8 X 10F FLATBED .................. 8x 10’ Flatbed Heavy Frame, ramp gate ................................... 76” ...........................10’ SH 8 X 12F FLATBED .................. 8x 12’ Flatbed Heavy Frame, ramp gate ................................... 76” ...........................12’ SH 8 X 14F FLATBED .................. 8x 14’ Flatbed Heavy Frame, ramp gate ................................... 76” ...........................14’

SH 8.5X 10F FLATBED ................ 8.5x 10’ Flatbed Heavy Frame, ramp gate ................................ 82” ...........................10’ SH 8.5X 12F FLATBED ................ 8.5x 12’ Flatbed Heavy Frame, ramp gate ................................ 82” ...........................12’ SH 8.5X 14F FLATBED ................ 8.5x 14’ Flatbed Heavy Frame, ramp gate ................................ 82” ...........................14’

Popular Options 3500lb Electric Brake Axle with Break-away Safety Kit & Battery Upgrade to Bi-fold Ramp Gate Spare Wheel & Tire Color upgrade Toolbox Kiln Dried Treated Lumber Aluminum Wheels

Standard Features • 4”x3”X1/4” angle steel frame • 2”x2”x3/16” angle steel crossmembers. • 4” channel tongue. • Extra thick Stakepockets: 10ft = 6, 12ft = 8, 14ft = 10 • 2” A-frame Posi-Lock coupler with dual safety chains. • 2000lb rated swivel-up jack. • Treated 2x8 wood decking. • Steel radius fenders with rock guard. • 3500lb axles with 5-bolt EZ lube hubs – 2990lb GVWR. • 15” white wheels and ST205/75R15 radial tires. • 50” tall, steel tube truss ramp gate with fold forward

storage & grab handle – 2000lb load rating. • Full LED, DOT compliant lighting with 4-prong flat trailer

plug. • Wiring enclosed in conduit. • Black powder coating standard.



5’ Wide Model78” overall width will fit inside a 7’ wide garage door. Fender width deck extensions (in front of fenders) allow space for a full size ATV.

8’ Wide Models

76” deck ............. 6’4” between fenders

8.5’ Wide Models 82”deck ............. 6’10”between fenders

H&H ATV Trailer

Model Description SH 5 X12F 4-Wheeler ......................................................... 5x 12’ Flatbed ATV, rail sides, removable front/side ramps, rear ramp gate SH 8 X12F HEAVY 4-Wheeler ............................. 8x 12’ Heavy Frame Flatbed, rail sides, removable front/side ramps, rear ramp gate SH 8 X14F HEAVY 4-Wheeler ............................. 8x 14’ Heavy Frame Flatbed, rail sides, removable front/side ramps, rear ramp gate SH 8.5 X12F HEAVY 4-Wheeler ....................... 8.5x 12’ Heavy Frame Flatbed, rail sides, removable front/side ramps, rear ramp gate SH 8.5 X14F HEAVY 4-Wheeler ....................... 8.5x 14’ Heavy Frame Flatbed, rail sides, removable front/side ramps, rear ramp gate

Popular Options 3500lb Electric Brake Axle with Break-away Safety Kit & Battery Upgrade to Bi-fold Ramp Gate Curbside Landscape Gate - in lieu of ramps Spare Wheel & Tire Kiln Dried Treated Deck

See All Options Page 6-7

Standard Features • 5 wide – 3”x2”x¼” angle steel frame • 8 and 8.5 wide - heavy 4”x3”x¼” angle steel frame. • 2”x2”x3/16” angle steel uprights and top rail. • 4” channel tongue. • 2” A-frame Posi-Lock coupler and dual safety chains. • 2000lb swivel-up jack. • 3500lb spring idler axle with 5-bolt EZ lube hubs – 2990lb

GVWR. • Treated 2x8 wood decking. • ST205/75R15 radial tires on white wheels. • Full LED, DOT compliant lighting with 4-prong flat trailer plug. • Wiring enclosed in conduit. • Steel fenders with rock guard on fender fronts. • 50” tall, tube steel main truss ramp gate with spring loaded J-

hook closure & grab handle – 2000lb load rating. • Two 5’ long heavy duty ramps stored on side of trailer –

heavier ramps allow you to load more than just ATVs!

72”

60”

NOTE: Ramps will be black regardless of trailer color.



Sapphire Blue



Standard Features • A36 grade 2”x 2”x 3/16” angle steel frame & crossmembers. • A36 grade 2”x 2”x 3/16” angle steel uprights with 2”x 1 1/2”

tube steel top rail – 15” tall. • 4” channel steel tongue. • 2” A-frame Posi-Lock coupler with dual safety chains. • 2000lb swivel-up jack. • Treated 2x8 wood decking. • Steel radius fenders. • 3500lb spring idler axle with 5-bolt EZ lube hubs – 2990lb

GVWR. • 15” White wheels and ST205/75R15 radial tires. • 50” tall, tube steel truss ramp gate with fold forward storage &

grab handle – 2000lb load rating. • Full LED, DOT compliant lighting with 4-prong flat trailer plug. • Wiring enclosed in conduit.

Model Description Deck Width Deck Length RS 5 X 8F RS ............................... 5x 8’ Flatbed Rail Sides, ramp gate ........................................... 60” ............................8’ RS 5 X 10F RS ............................. 5x 10’ Flatbed Rail Sides, ramp gate ......................................... 60” ...........................10’ RS 5 X 12F RS ............................. 5x 12’ Flatbed Rail Sides, ramp gate ......................................... 60” ...........................12’ RS 5 X 14F RS ............................. 5X 14’ Flatbed Rail Sides, ramp gate ........................................ 60” ...........................14’

RS 5.5 X 8F RS ............................ 5.5x 8’ Flatbed Rail Sides, ramp gate ........................................ 66” ............................8’ RS 5.5 X 10F RS .......................... 5.5x 10’ Flatbed Rail Sides, ramp gate ...................................... 66” ...........................10’ RS 5.5 X 12F RS .......................... 5.5x 12’ Flatbed Rail Sides, ramp gate ...................................... 66” ...........................12’ RS 5.5 X 14F RS .......................... 5.5x 14’ Flatbed Rail Sides, ramp gate ...................................... 66” ...........................14’

RS 8 X 10F RS ............................. 8X 10’ Flatbed Rail Sides, ramp gate ........................................ 76” ...........................10’ RS 8 X 12F RS ............................. 8X 12’ Flatbed Rail Sides, ramp gate ........................................ 76” ...........................12’ RS 8 X 14F RS ............................. 8X 14’ Flatbed Rail Sides, ramp gate ........................................ 76” ...........................14’

RS 8.5X 10F RS ........................... 8.5X 10’ Flatbed Rail Sides, ramp gate ..................................... 82” ...........................10’ RS 8.5X 12F RS ........................... 8.5X 12’ Flatbed Rail Sides, ramp gate ..................................... 82” ...........................12’ RS 8.5X 14F RS ........................... 8.5X 14’ Flatbed Rail Sides, ramp gate ..................................... 82” ...........................14’

Popular Options 3500lb Electric Brake Axle with Break-away Safety Kit & Battery Upgrade to Bi-fold Ramp Gate Spare Wheel & Tire Kiln Dried Treated Deck Aluminum Wheels

H&H RS Rail Side Single Axle Utility Trailer

H&H TRAILERS LLC STRONGLY RECOMMENDS HITCHING YOUR TRAILER TO YOUR TOW VEHICLE BEFORE LOADING! PHOTOS MAY SHOW OPTIONAL EQUIPMENT. MODELS AND OPTIONS ARE SUBJECT TO CHANGE. H&H IA Steel Trailer – Page 5A

H&H TRAILERS LLC STRONGLY RECOMMENDS HITCHING YOUR TRAILER TO YOUR TOW VEHICLE BEFORE LOADING! PHOTOS MAY SHOW OPTIONAL EQUIPMENT. MODELS AND OPTIONS ARE SUBJECT TO CHANGE. H&H IA Steel Trailer – Page 5B

Model Description Deck Width Deck Length TRS8 UT12 RS ........................ 8x12’ Rail Side Tandem Utility Trailer ................................................ 76” ............................... 12 ft TRS8 UT14 RS ........................ 8x14’ Rail Side Tandem Utility Trailer ................................................ 76” ............................... 14 ft TRS8 UT16 RS ........................ 8x16’ Rail Side Tandem Utility Trailer ................................................ 76” ............................... 16 ft TRS8 UT18 RS ........................ 8x18’ Rail Side Tandem Utility Trailer ................................................ 76” ............................... 18 ft TRS8 UT20 RS ........................ 8x20’ Rail Side Tandem Utility Trailer ................................................ 76” ............................... 20 ft

TRS8.5 UT 12 RS .................... 8.5x12’ Rail Side Tandem Utility Trailer ............................................. 82” ............................... 12 ft TRS8.5 UT 14 RS .................... 8.5x14’ Rail Side Tandem Utility Trailer ............................................. 82” ............................... 14 ft TRS8.5 UT 16 RS .................... 8.5x16’ Rail Side Tandem Utility Trailer ............................................. 82” ............................... 16 ft TRS8.5 UT 18 RS .................... 8.5x18’ Rail Side Tandem Utility Trailer ............................................. 82” ............................... 18 ft TRS8.5 UT 20 RS .................... 8.5x20’ Rail Side Tandem Utility Trailer ............................................. 82” ............................... 20 ft

H&H RS Rail Side Tandem Axle Utility Trailer

Standard Features • 4”x 3”x 1/4” angle steel frame. • 3”x 2”x 3/16” angle steel crossmembers. • A36 grade 2”x 2”x 3/16” angle steel uprights with 2”x

1 1/2” tube steel top rail – 15” tall. • 4” channel steel tongue. • 2 5/16” A-frame Posi-Lock coupler with dual safety

chains. • 5000lb set-back jack with foot. • Treated 2x8 wood decking. • Steel radius fenders. • Tandem 3500lb spring axles with EZ lube hubs –

7000lb GVWR. • 4-wheel electric brakes with break-away kit and

battery. • ST205/75R15 radial tires on white wheels. • 50” tall, tube steel truss ramp gate with fold forward

storage & grab handle – 2000lb load rating. • Full LED, DOT compliant lighting. • 7-prong trailer plug. • Wiring enclosed in conduit.



Sapphire Blue


Popular Options Tear Drop Fenders Bi-fold Ramp Gate Split Ramp Gates

Side Landscape Gate Aluminum Wheels

9990lb Suspension Package Toolbox

Kiln Dried Treated Deck


Standard Features • Unique 12-gauge solid steel chassis. • 15” tall, 12-gauge solid steel sides. • 4” channel steel tongue – tilting or non-tilting. • 2” A-frame Posi-Lock coupler with dual safety chains. • 2000lb swivel-up jack. • 3500lb spring idler axle with 5-bolt EZ lube hubs – 2990lb GVWR

rating. • ST205/75R15 radial tires mounted on white wheels. • Steel radius fenders with rock guard on fender fronts. • Treated 2x8 wood decking. • 8 mini D-rings mounted on interior sides and 4 corner tie downs. • Standard board gate slot at rear of deck. • Full LED, DOT compliant lighting with 4-prong flat trailer plug.

Wiring enclosed in conduit.

H&H SS Solid Side Tandem Axle Utility Trailers

Deck Width Deck Length Tiltbed Model Flatbed Model 60” ....................... 10ft ......................... SS 5x10E SS .......................... SS 5x10F SS 60” ....................... 12ft ......................... SS 5x12E SS .......................... SS 5x12F SS 60” ....................... 14ft ......................... SS 5x14E SS .......................... SS 5x14F SS

66” ....................... 10ft ......................... SS 5.5x10E SS ....................... SS 5.5x10F SS 66” ....................... 12ft ......................... SS 5.5x12E SS ....................... SS 5.5x12F SS 66” ....................... 14ft ......................... SS 5.5x14E SS ....................... SS 5.5x14F SS

76” ....................... 10ft ......................... SS 8x10E SS .......................... SS 8x10F SS 76” ....................... 12ft ......................... SS 8x12E SS .......................... SS 8x12F SS 76” ....................... 14ft ......................... SS 8x14E SS .......................... SS 8x14F SS

82” ....................... 10ft ......................... SS 8.5x10E SS ....................... SS 8.5x10F SS 82” ....................... 12ft ......................... SS 8.5x12E SS ....................... SS 8.5x12F SS 82” ....................... 14ft ......................... SS 8.5x14E SS ....................... SS 8.5x14F SS

H&H SS Solid Side Single Axle Utility Trailers

Ramp Gate STANDARD 50” tall, tube steel truss ramp gate latches using a spring-loaded J-hook with no pin removal. Lay it flat on the floor for no wind drag. Grab handle included for ease of lifting. Flatbed models only. 2000lb load rating.

Popular Options Bi-fold Ramp

Side Landscape Gate Box Top Rope Rail

Upgrade to Electric Brake Axle Kiln Dried Treated Deck

See page 6 & 7 for all available options.


Standard Features • Unique 12-gauge solid steel chassis. • 4” channel steel tongue fully wrapped to front

suspension mounts for unmatched strength! • 15” tall, 12-gauge solid steel sides. • 25/16" A-frame Posi-Lock coupler and dual safety chains. • 5000lb set-back jack with foot for more tailgate clearance. • Multiple interior D-ring tie-downs. • Standard fenders with bracing. • Rock guard on fender fronts. • Treated 2x8 wood decking. • Tandem 3500lb spring axles – 7000lb GVWR. • 4-wheel electric brakes with break-away kit and battery. • ST205/75R15 radial tires on white wheels. • Full LED, DOT compliant lighting and 7-prong trailer plug. • Wiring enclosed in conduit. • Board gate slots at rear of deck. • 50” tall, tube steel truss ramp gate standard…folds flat for

less drag – 2000lb load rating.

Model Description Deck Width Deck Length ST8 UT12 SS ........................... 8x12’ SS Solid Panel Side Tandem Utility Trailer ............................... 76” ............................... 12 ft ST8 UT14 SS ........................... 8x14’ SS Solid Panel Side Tandem Utility Trailer ............................... 76” ............................... 14 ft ST8 UT16 SS ........................... 8x16’ SS Solid Panel Side Tandem Utility Trailer ............................... 76” ............................... 16 ft ST8 UT18 SS ........................... 8x18’ SS Solid Panel Side Tandem Utility Trailer ............................... 76” ............................... 18 ft ST8 UT20 SS ........................... 8x20’ SS Solid Panel Side Tandem Utility Trailer ............................... 76” ............................... 20 ft

ST8 .5UT 12SS ........................ 8.5x12’ SS Solid Panel Side Tandem Utility Trailer ............................ 82” ............................... 12 ft ST8 .5UT 14SS ........................ 8.5x14’ SS Solid Panel Side Tandem Utility Trailer ............................ 82” ............................... 14 ft ST8 .5UT 16SS ........................ 8.5x16’ SS Solid Panel Side Tandem Utility Trailer ............................ 82” ............................... 16 ft ST8 .5UT 18SS ........................ 8.5x18’ SS Solid Panel Side Tandem Utility Trailer ............................ 82” ............................... 18 ft ST8 .5UT 20SS ........................ 8.5x20’ SS Solid Panel Side Tandem Utility Trailer ............................ 82” ............................... 20 ft ST8 .5UT 22 SS ....................... 8.5x22’ SS Solid Panel Side Tandem Utility Trailer ............................ 82” ............................... 22 ft ST8 .5UT 24 SS ....................... 8.5x24’ SS Solid Panel Side Tandem Utility Trailer ............................ 82” ............................... 24 ft

H&H SS Solid Side Tandem Axle Utility Trailers

Popular Options Tear Drop Fenders Box Top Rope Rail Split Ramp Gates

Side Landscape Gate 9990lb Suspension Package

Kiln Dried Treated Deck

See page 6 & 7 for all available options.




Sapphire Blue



H&H Utility Trailers Options

Coupler ATV RS SSSA SSUT2" Bulldog Forged Cast A-frame - 7000lb rating x x x x Adjustable 2" Bulldog Cast Forged - 7000lb rating x x x x 25/16" Bulldog Forged Cast A-frame - 12500lb rating x x x x Adjustable 25/16" Bulldog Cast Forged - 12500lb rating x x x x Fenders ATV RS SS SA SSUTTear Drop Fenders x Jack ATV RS SS SA SSUT7000lb Dropleg Jack (in set-back position) x Paint Color ATV RS SS SA SSUTCAT Black (standard) x x x x CAT Yellow x x x x H&H Grey x x x x John Deere Green x x x x Safety Orange x x x x Sapphire Blue x x x x Signal Red x x x x Ramp Gates and Ramps ATV RS SS SA SSUTSide Ramp Gates 60” Side Landscape Ramp Gate – 12ft & 14ft single axle models only x x 60” Side Landscape Ramp Gate – 16ft + tandem axle models only x 76” Side Landscape Ramp Gate – 18ft + tandem axle models only x 82” Side Landscape Ramp Gate – 18ft + tandem axle models only x Upgrade Side Ramp Gate to Bi-fold Ramp Gate – priced additional to ramp gate cost x x x Rear Ramp Gates Upgrade Rear Ramp Gate to Bi-fold Ramp Gate – priced additional to ramp gate cost x x x x 5' Tall Gate x x x x 4' Tall SPLIT Gate x x x x 5' Tall SPLIT Gate x x x x Heavy Duty 5’ Ramp Gate - Spring Assisted SPLIT folding skid loader ramp gate x Remove Ramp Gate **FLATBEDS ONLY** x x x x Ramps ATV RS SS SA SSUT5' long 2" Ramps in Carrier instead of standard gate - 16' trailer or longer x 5' long 3" Heavy Service Ramps in Carrier instead of standard gate - 16' trailer or longer x

Rock Guard ATV RS SS SA SSUTCover front panel of Solid Side with 15" of Aluminum Tread Plate x x Cover front panel of Solid Side with 24" of Aluminum Tread Plate x x Cover front panel of Solid Side with 34" of Aluminum Tread Plate x x


H&H Utility Trailers Options

Rope Tie Downs, Side Height, Stake Pockets, & Storage ATV RS SS SA SSUTBox Top Rope Rail above Solid Side x x 24” Tall Front and Sidewall Height x x 34” Tall Front and Sidewall Height x x D Rings (750lb rate miniature rings for SS trailers) x x x x Stake Pockets (approx. every 4'; 2-3 on front, depending on width) x x x x Tongue Mounted Toolbox x x x x Suspension

Single Axle ATV RS SS SA SSUT3500lb Electric Brake Axle & Break-away Kit with Battery x x x 5200lb Brake Axle & Break-away Kit with Battery x x Tandem Axles ATV RS SS SA SSUT7000lb Torsion Brake Axles Upgrade – includes break-away kit with battery x 9990lb Package – includes approx. 16” on center crossmembers spacing, tandem 5200lb axles with 4-wheel electric brakes, sealed beam lighting, break-away kit with battery, ST225/75R15 trailer radials on 6-bolt white wheels, and 7K dropleg jack. *Please note: H&H does NOT recommend using any utility trailer for hauling cars.

x

Tire/Wheel Upgrades UPGRADES ATV RS SS SA SSUTST205/75R15 Radial on Chrome Wheel x x x x ST205/75R15 Radial on Aluminum Wheel: Mod, 5-star, Hollow or Spider Spoke x x x x 10K ST225/75R15 (D) Radial on Chrome Wheel x 10K ST225/75R15 (D) Radial on Aluminum Wheel: Directional, 5-Star, or Mod x SPARES ATV RS SS SA SSUTSPARE ST205/75R15 Radial with White Wheel x x x x SPARE ST205/75R15 Radial with Chrome Wheel x x x x SPARE ST205/75R15 Radial with Aluminum Wheel: Directional, 5-Star, or Mod x x x x SPARE ST225/75R15 D rated on 15" white wheel 6-bolt white wheel x Mounting for Spare x x x x Winches ATV RS SS SA SSUTManual 3200lb Winch – 2-speed cable; receiver tube and insert mount winch x x x Manual Winch Mounting Only x x x

Model shown with optional 24” sides. Model shown with optional split ramp gate, 9990lb suspension, and color.


Standard Features • Treated 2x8 wood decking pressed into place to eliminate gaps.

• Front and rear end caps bolted into place to eliminate board cupping. • 3” Steel runners for fuel mounting placed in the deck.

• 25/16" A-frame Posi-Lock coupler standard - 14000lb rated. • Dual safety chains with ‘S’ hooks.

• 4-wheel electric brakes with break-away kit and battery. • 10” wide tandem fenders with structural braces inside. Strong enough to walk on!

• Rock guard on fenders fronts helps against chipping. • 6 extra thick-formed stake pockets.

• Low profile headache rack with supports on front of the deck. • DOT compliant, full LED lighting includes combination stop, turn, and taillights.

• Wiring enclosed in conduit. • Black powder coating standard.

H&H Fuel Trailers

Model: TH 5X10F FUEL 60” Deck Width 10’ Deck Length 4”x3”x1/4” Angle Steel Frame 3”x 2”x 3/16” Angle Steel Crossmembers 4” Channel Steel Tongue 5000lb Set-back Jack (2) 3500lb Leaf Spring Axles – 5-bolt EZ Lube Hubs7000lb GVWR ST205/75R15 Radial Tires on White Wheels

Model: HD 5.5X10F FUEL 66” Deck Width 10’ Deck Length 6” Channel Steel Frame 3” Channel Steel Crossmembers 5” Channel Steel Tongue 7000lb Dropleg Jack (2) 5200lb Leaf Spring Axles – 5-bolt EZ Lube Hubs9990lb GVWR ST225/75R15 Radial Tires on 16” White Wheels

Trailers are designed to haul fuel tanks. Tanks & components sold separately. Photos below are for reference.


Model Deck Width Deck Length *8.5HD12 .......................... 82” ........................... 12 ft 8.5HD14 ............................ 82” ........................... 14 ft 8.5HD16 ............................ 82” ........................... 16 ft 8.5HD18 ............................ 82” ........................... 18 ft 8.5HD20 ............................ 82” ........................... 20 ft 8.5HD22 ............................ 82” ........................... 22 ft 8.5HD24 ............................ 82” ........................... 24 ft *Ramp carrier unavailable on 12ft lengths. Ramps sold separately.

What’s in an H&H Heavy Duty Flatbed Trailer? • Treated 2x8 wood decking.

• Floor pressed into place to eliminate gaps and mounted with ¼” type F trailer decking screws. • Front and rear end caps bolted into place to eliminate board cupping.

• Full structural channel steel tongue, frame, and crossmembers featuring fully conjoined welds. • 6.7lb/ft, 5” channel steel frame.

• Full wrap tongue extended to front suspension mount. Nothing stronger! • Critical tongue areas are braced and gussets are welded into place.

• 5000lb set-back jack for more clearance – open your tailgate without unhooking the trailer! • 25/16" Posi-Lock coupler standard - 14000lb rated.

• Dual safety chains with ‘S’ hooks. • Steel leaf spring suspension mounted to equalized JIG fitted suspension system.

• (2) 3500lb spring axles with EZ lube hubs – 7000lb GVWR. • 4-wheel electric brakes with break-away kit and battery.

• 10” wide tandem fenders with structural braces inside. Strong enough to walk on! • Rock guard on fenders fronts helps against chipping.

• 10 extra thick-formed stake pockets are standard on a 16’ trailer. The longer the trailer, the more pockets! • Low profile headache rack with four supports on front of the deck.

• (2) 2”x 5' long ramps with lockable carrier standard – 1750lb load rating each. • Full width ramp hook bar on rear of deck.

• DOT compliant, full LED lighting includes combination stop, turn, and taillights. • Wiring enclosed in conduit.

• The industry’s toughest design standards. • Black powder coating standard.

See pages 13-17 for additional options.

H&H Heavy Duty Flatbed Trailer


• Full structural channel steel tongue, frame, and crossmembers featuring fully conjoined welds.

• 6” channel steel frame. • 2ft all steel dovetail with 3”x5' long flip down, lay down skid

loader ramps – 3000lb load rating each. • 5” channel steel, fully wrapped tongue extended to front

suspension mount. • Critical tongue areas are braced and gussets are welded into

place. • Low profile headache rack with four supports on front of the

deck. • Treated 2x8 wood decking pressed into place to eliminate

gaps and mounted. • Front and rear end caps bolted into place to eliminate board

cupping. • 10 extra thick-formed stake pockets are standard on a 16’

trailer. The longer the trailer, the more pockets! • 10” wide tandem fenders with structural braces inside. Strong

enough to walk on! • Rock guard on fenders fronts helps against chipping. • (2) 5200lb steel leaf spring suspension mounted to equalized

JIG fitted suspension system -9990lb GVWR. • 4-wheel electric brakes with break-away kit and battery. • ST225/75R15 radial tires on white wheels. • Full LED, DOT compliant lighting to include stop, turn, and

taillights. • Wiring enclosed in conduit. • Black powder coating standard.

Overall Model Description Deck Width Deck Length Deck Length 8.5HD14 +DOVE 16’ .......... 8.5x 14’ Flatbed with 2’ Steel Dovetail ................... 82” .............................. 14’ .............................. 16’ 8.5HD16 +DOVE 18’ .......... 8.5x 16’ Flatbed with 2’ Steel Dovetail ................... 82” .............................. 16’ .............................. 18’ 8.5HD18 +DOVE 20’ .......... 8.5x 18’ Flatbed with 2’ Steel Dovetail ................... 82” .............................. 18’ .............................. 20’ 8.5HD20 +DOVE 22’ .......... 8.5x 20’ Flatbed with 2’ Steel Dovetail ................... 82” .............................. 20’ .............................. 22’ 8.5HD22 +DOVE 24’ .......... 8.5x 22’ Flatbed with 2’ Steel Dovetail ................... 82” .............................. 22’ .............................. 24’ 8.5HD24 +DOVE 26’ .......... 8.5x 24’ Flatbed with 2’ Steel Dovetail ................... 82” .............................. 24’ .............................. 26’

H&H Industrial Line Flatbed Trailer

Model shown with gooseneck hitch & drive-over fenders options.


To tilt EX trailer: Press the up button to raise the front of the deck and drop the tail on the ground! Press the down button to lower the front of the deck down and go!

How the MX Manual Tiltbed works: Powerful hydraulic ram jack is operated by hand to tilt the bed up. (Much faster than handling ramps) Slowly release pressure valve on the jack to lower the bed down at the rate YOU CHOOSE.

Model Description T 8.5HD18 MX MAN/HYD ..... 8.5x 18’ SpeedLoader™ MX Manual Tandem Tiltbed T 8.5HD20 MX MAN/HYD ..... 8.5x 20’ SpeedLoader™ MX Manual Tandem Tiltbed T 8.5HD22 MX MAN/HYD ..... 8.5x 22’ SpeedLoader™ MX Manual Tandem Tiltbed T 8.5HD24 MX MAN/HYD ..... 8.5x 24’ SpeedLoader™ MX Manual Tandem Tiltbed

Model Description Deck Width T8.5HD18 EX HYD/ELEC ................... 8.5x 18’ SpeedLoader™ EX Electric Tandem Tiltbed ................................................................ 82” T8.5HD20 EX HYD/ELEC ................... 8.5x 20’ SpeedLoader™ EX Electric Tandem Tiltbed ................................................................ 82” T8.5HD22 EX HYD/ELEC ................... 8.5x 22’ SpeedLoader™ EX Electric Tandem Tiltbed ................................................................ 82” T8.5HD24 EX HYD/ELEC ................... 8.5x 24’ SpeedLoader™ EX Electric Tandem Tiltbed ................................................................ 82”

Features Same chassis design and materials as our Heavy Duty Flatbed Trailer and SpeedLoader™ MX Manual Tilt Trailer! Complete power pack pre-wired with long lasting deep cycle battery system and recharge feature built in. Extremely powerful hydraulic unit with all lines and cylinder system pre-engineered. Power up and power down!

Standard Features • 5” Full structural channel steel frame; 6.7lb/ft. • 3” Full structural channel steel crossmembers.

• 5” Channel steel tongue. • 7000lb rated dropleg jack, set back for more clearance

• 2 5/16” Posi-lock – 14000lb rating with dual safety chains. • Treated 2x8 wood decking.

• Low profile headache rack and at least 10 heavy gauge stake pockets are fitted to each trailer. • Full LED, DOT compliant lighting with wiring enclosed in conduit.

• Reverse dovetail with taper cut under the deck for a lower approach angle. • 10” wide fenders with structural braces and ATP rock guard fronts.

• 7000lb GVWR with ST205/75R15 radial tires on white wheels with 4-wheel electric brakes, break-away kit and battery.

WARNING: H&H DOES NOT RECOMMEND TILTING THE SPEEDLOADER BED WHEN THE TRAILER IS NOT COUPLED TO THE TOW VEHICLE.

WWAARRNNIINNGG:: HH&&HH DDOOEESS NNOOTT RREECCOOMMMMEENNDD TTIILLTTIINNGG TTHHEE SSPPEEEEDDLLOOAADDEERR BBEEDD WWHHEENN TTHHEE TTRRAAIILLEERR IISS NNOOTT CCOOUUPPLLEEDD TTOO TTHHEE TTOOWW VVEEHHIICCLLEE..

H&H SpeedLoader™ Tandem Tiltbed Trailers

It really is that simple!


Standard Features • 8” high tensile strength channel steel frame – fully

gusseted for strength! • 12000lb rated dropleg jack. • Tandem 6000lb slipper spring straight axles. • 4-wheel electric brakes with break-away kit and battery. • ST235/80R16 tires on 8-bolt wheels – rated at 3500lb

each! • 12000lb GVWR. • Full LED lighting. • Wiring enclosed in conduit. • Treated 2x8 wood decking – 82” deck width. • Extra thick 3/16” formed stake pockets – the heaviest in

the industry! • Smooth top design with a taper cut under the deck. • Bumper Pull Models: • 6” Channel steel tongue. • Headache rack. • 25/16” Adjustable height coupler with dual safety chains. • Gooseneck Models: • 8” Channel steel dropdown neck with custom built bi-fold

neck gussets. • Adjustable height gooseneck ball mount coupler with

safety chains.

All the popular features of our best selling SpeedLoaders™ in longer lengths with heavier suspensions!

To tilt trailer: Press the up button to raise the front of the deck and drop the tail on the ground! Press the down button to lower the front of the deck down and go! It really is that simple!

Bumper Hitch Models Description T8.5HD26 EX ........................................................... 8.5x 26' Heavy Duty SpeedLoader™ EX Electric Tandem Tiltbed; 12000lb GVWR

Gooseneck Hitch Models Description T8.5HD26 GOOSENECK EX ............... 8.5x 26' Heavy Duty SpeedLoader™ EX Gooseneck Electric Tandem Tiltbed; 12000lb GVWR T8.5HD28 GOOSENECK EX ............... 8.5x 28' Heavy Duty SpeedLoader™ EX Gooseneck Electric Tandem Tiltbed; 12000lb GVWR T8.5HD30 GOOSENECK EX ............... 8.5x 30' Heavy Duty SpeedLoader™ EX Gooseneck Electric Tandem Tiltbed; 12000lb GVWR

See pages 13-17 for additional options.

WARNING: H&H DOES NOT RECOMMEND TILTING THE SPEEDLOADER™

BED WHEN THE TRAILER IS NOT COUPLED TO THE TOW VEHICLE.

H&H Heavy Duty SpeedLoader™ EX Tandem Tiltbed

Suspension Upgrades Available



Sapphire Blue



Model Description 10000lb GVWR GTL14+4 10K ............................ GTL Lo-Deck 8.5x14’ Gravity Tilt with 4’ Stationery Deck GTL14+6 10K ............................ GTL Lo-Deck 8.5x14’ Gravity Tilt with 6’ Stationery Deck GTL16+4 10K ............................ GTL Lo-Deck 8.5x16’ Gravity Tilt with 4’ Stationery Deck GTL16+6 10K ............................ GTL Lo-Deck 8.5x16’ Gravity Tilt with 6’ Stationery Deck GTL18+4 10K ............................ GTL Lo-Deck 8.5x18’ Gravity Tilt with 4’ Stationery Deck GTL18+6 10K ............................ GTL Lo-Deck 8.5x18’ Gravity Tilt with 6’ Stationery Deck GTL20+4 10K ............................ GTL Lo-Deck 8.5x20’ Gravity Tilt with 4’ Stationery Deck GTL20+6 10K ............................ GTL Lo-Deck 8.5x20’ Gravity Tilt with 6’ Stationery Deck

Standard Features • 6” channel steel main frame. • 6” channel steel, full wrap tongue. • 3” channel steel crossmembers on 16” centers. • Greasable pivot points. • Hydraulic cushion load cylinder – gravity operated. • Foot operated step latch – one step, unlock and

tilt! • 82” Deck width between fenders. • 75” tilting deck width – behind fenders. • 80” main deck width – in front of fenders. • Treated 2x8 wood decking. • Extra thick-formed stake pockets. • 25/16” adjustable height 14K rated coupler with dual

safety chains. • 7000lb dropleg jack. • Tandem teardrop steel fenders with ATP front rock

guard. • Tandem 5200lb drop axles with 4-wheel electric

brakes, break-away safety kit and battery. – 9990lb GVWR

• ST225/75R15 radial tires on 15” white wheels. • Full LED lighting with wiring enclosed in conduit.

Available Options 12000lb Suspension Upgrade 14000lb Suspension Upgrade 12000lb Dropleg Jack Gooseneck Hitch Second 12K Jack on Gooseneck Rub Rails E-track & Clips Paint Color Upgrade

H&H GTL Gravity Tilt Flatbed Trailer


WARNING: H&H DOES NOT RECOMMEND TILTING THE SPEEDLOADED BED WHEN THE TRAILER IS NOT COUPLED TO THE TOW VEHICLE.

Section: DeckDescription Dovetail Option, all steel units – adds 2’ to bed length ...................... A must have item for car haulers! No other like it! Steel Diamond Plate Floor ................................................................ ⅛” steel diamond plate over gridded crossmembers. Outrigger Deck Extensions – in front of fenders ................................ Steel extensions bring floor out to fender width to front of

trailer. Includes rub rails on stake pockets! Outrigger Deck Extensions – behind fenders .................................... Steel extensions bring floor out to fender width to rear of

trailer. Includes rub rails on stake pockets!

NEED EXTRA WIDTH? ORDER OUTRIGGER DECK EXTENSIONS WITH OUR EXCLUSIVE DRIVE OVER

FENDERS (SHOWN IN PHOTO TO LEFT) FOR A FULL 102” WIDE DECK!

Section: FendersDescription Teardrop fenders ............................................................................... Great looks and even more strength. Removable teardrop fenders ............................................................. Easily removed and installed. Smooth steel drive-over fender

Section: Couplers and Gooseneck HitchesDescription 2" Bulldog coupler ............................................................................. Full 7000lb rated coupler for a 2” ball hitch. 2" Bulldog adjustable height coupler ................................................. 7000lb rate coupler. 25/16" Bulldog coupler ........................................................................ 12500lb rated coupler. 25/16” Bulldog adjustable height coupler ............................................ 12500lb rated coupler. 25/16” Adjustable height coupler – 20000lb rating .............................. Fully adjustable height with Bulldog or Posi-Lock coupler. Adjustable pintle ring hitch ................................................................ Fully adjustable industrial pintle ring hitch. Gooseneck hitch option for Heavy Duty Flatbed ............................... Converts trailer to a gooseneck and includes...

8” channel steel gooseneck welded to main chassis of trailer. Adjustable height gooseneck ball mount coupler. 12000lb rated dropleg jack with sidewind handle mounted. Proper gooseneck safety chains mounted.

Gooseneck hitch option for SpeedLoader™ EX ........................... Includes gooseneck features plus twin cylinder tilt system. Required on 28ft + models.

Flatbed & Tiltbed Trailers Options Section


Section: Paint

Powder Coat Finish Standard!

Introducing Super Durable TGIC-Free Polyester High-Gloss Powder Coating. In combination with our steel blasting preparation, H&H powder coating process provides these benefits:

● Better Corrosion Resistance & Adhesion ● Superior Gloss & Color Retention ● Superior Durability ● Superior Finish ● UV Protection ● Meets AAMA 2604 Specifications ● Impact Resistant ● Environmentally Friendly

RAMP GATES AND SKID LOADER RAMPS ARE NOT AVAILABLE ON SPEEDLOADER™ TILTBED MODELS


Section: JacksDescription 7000lb dropleg jack ............................................................................Top of the line jack with big foot and super strength - standard

on all SpeedLoader© tiltbed trailers! 12000lb spring loaded jack ................................................................Standard on our Goosenecks and heavy suspension models-

mounted to front of deck.

Available Colors CAT Black ....................... No Charge H&H Yellow H&H Gray John Deere Green Safety Orange Sapphire Blue Signal Red

Section: Ramps

NOTE: Ramp carriers are NOT available on 12’ length tandem trailers Description ____________________________________ Ramps: 5’ long 2” ramps – Loose ...................................................................Each ramp, not including carrier – 1750lb rating each. 5' long 3” heavy service ramps and carrier upgrade ..........................3” channel steel units for heavier loads with lockable carrier –

Recommended on GVWR of 9990lb and above – 3000lb rating each.

6' long 3” heavy service ramps and carrier upgrade ..........................Extra length for lower slope – 3000lb rating each. Skid Loader Ramps: 3” skid loader ramps ..........................................................................H&H exclusive channel steel flip-over ramps with their own

dock legs – 3000lb rating each. 4” skid loader ramps ..........................................................................A little beefier model – 3250lb rating each. Spring assist option for skid loader ramps .........................................Spring assist does all the work for you!


Section: Ramp Gates Description Ramp Gates: 4’ tall ramp gate in lieu of standard ramps & carrier .......................... H&H exclusive heavy duty ramp gate features 7 - 2” tube steel

supports covered by 1.5” x 9lb expanded metal. Lightweight and strong! 2000lb load rating.

5’ tall ramp gate in lieu of standard ramps & carrier .......................... 1 foot extra height for a lower slope – 2000lb load rating. 4’ tall split ramp gate in lieu of standard ramps ................................. Allows gate to be lowered in halves for lighter weight – 2000lb

load rating. 5’ tall split ramp gate in lieu of standard ramps ................................. Extra tall for lower slope – 2000lb load rating. Heavy Duty Spring Assist 5’ Split Ramp Gate ................................... The convenience of a ramp gate with the strength of a skid

loader ramp! This is a double spring assist split ramp gate with a structure made from 3” channel steel and the heaviest expanded metal we can find! The capacity rivals any skid loader ramp. Includes flip-down dock legs. 3000lb load rating.

Section: Rub Rails, Tie-Downs, and StorageDescription Extra headache rack height .............................................................. per foot. Side Rails .......................................................................................... Removable side rails, drop in pockets, front or rear. Extra stake pockets ........................................................................... (each) Rub Rails .......................................................................................... Add rub rails on trailer sides, over stake pockets D-Ring tie-downs (each) .................................................................. Wood floor models only. Recessed D-Ring tie-downs (each) ................................................... Steel floor models only. Recessed E-track (per foot) .............................................................. Wood floor models only. E-track Clips (per clip) ....................................................................... Rated at 5000lb. Chain Tray (Gooseneck ONLY) ........................................................ Open wire mesh tray in hitch area. Toolbox ............................................................................................. Tongue mounted. Pump Box ......................................................................................... for tiltbed models.

Section: Rock Guard FairingDescription Rock Guard Fairing ........................................................................... Rock guard fairing made from stainless

steel tube and formed ATP! Simple bolt-on design for easy removal!



9990lb GVWR Upgrade Options (HDF / MX / EX Models)10K Suspension Package: Tandem 5200lb axles.................................................... Included .......Two commercial grade 5200lb spring axles. Tandem equalizer suspension ...................................... Included .......Full eye design for more weight transition. 4 wheel 12” electric brakes ........................................... Included .......Heavy service commercial electric drum brakes. (4) ST225/75R-15 D rated trailer radials ....................... Included .......Mounted on white wheels – 6 on 5.5-bolt pattern. 6" channel steel frame upgrade .................................... Included .......20% more frame than the standard model. 7000lb dropleg jack ....................................................... Included .......HDF models. GVWR Rating ....................................................................................9990lb Option Package Ramp Requirement for Heavy Duty Flatbed Trailers 5' length 3” Heavy Service ramps and carrier ............................ Additional Upgrades Torsion Axle Upgrade – (2) 5200lb axles ...........................................smoothest highway ride!

12000lb GVWR Upgrade Options (HDF / HD IL / MX / EX Models)12K Spring Suspension Package: Tandem 6000lb axles.................................................... Included .......8 on 6.5-bolt pattern. Self-equalizing slipper type suspension ........................ Included .......Rated for 100,000+ mile service life. 12” brakes on all wheels ............................................... Included .......Commercial grade 4-wheel electric drum brakes. 6" channel steel frame upgrade .................................... Included .......20% more frame than the standard trailer (HDF/MX/EX) 25/16” Adjustable height coupler .................................... Included .......8” of height adjustment with simple hand tools! 12000lb capacity dropleg jack ....................................... Included .......Gooseneck style dropleg jack with spring retractable foot. DOT red/white reflective tape ....................................... Included .......Required by law on all 10000lb+ GVWR rated trailers. 16” white wheels ........................................................... Included .......8 on 6.5-bolt pattern. ST235/80R16 radial trailer tires .................................... Included .......Heavier 80 Series tire rated at 3500lb+ each. Option Package Ramp Requirement for Heavy Duty Flatbed Trailers 5' length 3” Heavy Service ramps and carrier ............................ NOTE: This upgrade package WILL raise fender height from floor! Industrial Line comes standard with 6” frame. Additional Upgrades Torsion Axles Upgrade ......................................................................Smoothest highway ride!

14000lb GVWR Upgrade Options (HDF / HD IL / MX / EX Models)14K Spring Suspension Package: Tandem 7000lb axles.................................................... Included .......8 on 6.5-bolt pattern. 12” brakes on all wheels ............................................... Included 6" channel steel frame upgrade .................................... Included .......The strongest in the industry! (HDF/MX/EX) 6” channel steel tongue upgrade .................................. Included 25/16” Adjustable height coupler .................................... Included .......8” of height adjustment with simple hand tools! 12000lb capacity dropleg jack ....................................... Included .......Gooseneck style dropleg jack with spring retractable foot. DOT red/white reflective tape ....................................... Included .......Required by law on all 10000lb+ GVWR rated trailers. 16” 8-bolt pattern white wheels ..................................... Included .......8 on 6.5 bolt pattern. ST235/80R16 radial trailer tires ................................... Included .......Heavier 80 Series tire rated at 3500lb+ each. Option Package Ramp Requirement for Heavy Duty Flatbed Trailers 5' length 3” Heavy Service ramps and carrier NOTE: This upgrade package WILL raise fender height from floor! Industrial Line comes standard with 6” frame. Additional Upgrades Torsion Brake Axles ...........................................................................Smooth highway ride! Other suspension upgrades may be available. Please ask for details.

Section: Suspensions7000lb GVWR Upgrade Option (HDF / MX / EX Models)Torsion Brake Axle Upgrade ..............................................................7000lb GVWR.




Section: Tires and WheelsDescription 7000lb GVWR – ST205/75R15 radial tire, 5 on 4.5” bolt pattern Aluminum Wheels (each) .................................................................. Includes ST205/75R15 radial tires. Chrome Wheels (each) ..................................................................... Includes ST205/75R15 radial tires. Spare ST205/75R15 radial tire on white wheel ................................. Does not include mount. Spare tire mount ................................................................................ On front or side of deck. Description 9990lb GVWR – ST225/75R15 tire, 6 on 5.5” bolt pattern: Aluminum Wheels (each) Chrome Wheels (each) Spare ST225/75R15 on white wheel ................................................. Does not include mount. Spare tire mount ................................................................................ On front or side of deck. Description 12000lb and 14000lb GVWR – ST235/80R16 tire, 8 on 6.5” bolt pattern: Aluminum Wheels (each) Chrome Wheels (each) Spare ST235/80R16 on white wheel ................................................. Does not include mount. Spare tire mount ................................................................................ On front or side of deck.

Section: Winches & RemotesDescription 3200lb rated Mechanical 2-speed winch ........................................... Welded on headache rack mount - includes steel cable. 10K rated Electric Super Winch with remote ..................................... Mounted on trailer floor at headache rack. Self-contained automotive battery pack for winches ......................... 12v Deep cycle battery. 2-way Cordless Remote .................................................................... Cordless remote for electric winch or EX electric tiltbed. Note: If you order an electric winch on your H&H SpeedLoader EX push button tiltbed trailer, the winch is

automatically pre-wired to the SpeedLoader EX’s standard battery pack.


Standard Features • 25/16” A-frame mounted Posi-Lock coupler. • 2000lb coupler mount jack. • Safety chains with snap hooks. • 4” Channel steel frame. • 3” Channel steel crossmembers. • 4” Channel steel tongue. • 66” interior box width. • 15” tall, 12 gauge steel sides. • 2-way landscape gate with spread chains. • 12-gauge steel floor with 4 mini d-rings welded in

corners. • 3”x24” single stroke Ram cylinder. • 12v hydraulic pump (3000 PSI) – pump box included. • Weatherproof 2-button remote. • 12v deep cycle battery. • 5200lb spring straight axle – 5200lb GVWR. • 12” electric drum brake with break-away kit. • ST225/75R15 trailer radials on 6-bolt white wheels. • Custom formed 10-guage steel fenders with vinyl rock

guard fronts. • Full LED, DOT compliant lighting. • Wiring in seamless PVC conduit. • Black powder coating standard.

MODEL Description UD5.5X8 15 SA Single Axle Utility Dump Box Trailer

H&H Utility Dump Box Trailer

Available Options Coupler Upgrades

7000lb Dropleg Jack Rock Guard on Front Panel

Box Top Rope Rails Stakepockets

Aluminum Wheels Spare Tire & Mount



Sapphire Blue


H&H TRAILERS LLC STRONGLY RECOMMENDS HITCHING YOUR TRAILER TO YOUR TOW VEHICLE BEFORE LOADING! PHOTOS MAY SHOW OPTIONAL EQUIPMENT. MODELS AND OPTIONS ARE SUBJECT TO CHANGE. H&H IA Steel Trailer – Page 24A

Standard Features • 25/16” A-frame mounted Posi-Lock coupler. • 7000lb dropleg jack. • Safety chains with snap hooks. • 5” Channel steel frame. • 3” Channel steel crossmembers. • 5” Channel steel tongue. • 76” interior box width. • 15” tall, 12 gauge steel sides. • Barn door style rear gate – ramps optional. • 12-gauge steel floor with 4 d-rings welded in floor

corners. • 4”x24” single stroke Ram cylinder. • 12v hydraulic pump (3000 PSI) – pump box included. • Weatherproof 2-button remote. • 12v deep cycle battery. • Tandem 5200lb spring straight axle – 9990lb GVWR. • 12” electric drum brakes with break-away kit. • ST225/75R15 trailer radials on 6-bolt white wheels. • Standard tandem fenders with ATP rock guard fronts. • Full LED, DOT compliant lighting. • Wiring in seamless PVC conduit. • Black powder coating standard.

MODEL Description UDB8X10 15 TA 96”x 10’ Tandem Axle Utility Dump Box Trailer Available Options 2”x 5’ Ramps in Carrier Spare Tire & Mount Teardrop or Drive-over Fenders Coupler Upgrades Stake Pockets ATP Rock Guard on Front Panel Aluminum Wheels Color Options Available

H&H Utility Dump Box Trailer


Upgrade Options Drop Axle Suspension Upgrade

Gooseneck Hitch Combo Gate (opens to top, bottom, or can be swung around to

side) Spare Tire & Wheel

Spare Tire Mount – placed on in front of fender on curbside Cordless Remote

Solar Charger for 12V Battery Rollover Tarp – installed

Pump Box

Standard Features • 25/16” A-frame mounted Posi-Lock coupler. • 7000lb dropleg jack. • Safety chains with snap hooks. • 6” Hot mill structural channel steel tongue. • 8” Hot mill structural channel steel frame. • 81” interior box width. • 24” tall, 12 gauge steel sides. • Standard side board provisions. • 2-way aggregate gate with spread chains. • 10-gauge steel floor. • 4x48 single cylinder. • 12v hydraulic pump – 3000 PSI. • Weatherproof 2-button remote. • 12v deep cycle battery. • Equalized slipper spring straight axle suspension. • 4-wheel 12” electric drum brakes with break-away kit. • ST235/80R16 trailer radials on 8-bolt white wheels. • Standard tandem fenders. • 5’ long 3” heavy service ramps with carrier – 3000lb

load rating each. • Full LED, DOT compliant lighting. • Wiring in seamless PVC conduit.

Model Description XLDB12-12K ..................... 102”x 12’ XL Dump Box, 12000lb GVWR XLDB14-12K ..................... 102”x 14' XL Dump Box, 12000lb GVWR

WARNING: H&H DOES NOT RECOMMEND TILTING THE DUMP BED WHEN THE TRAILER IS NOT COUPLED TO THE TOW VEHICLE.

WARNING: H&H DOES NOT RECOMMEND TILTING THE DUMP BED WHEN THE TRAILER IS

NOT COUPLED TO THE TOW VEHICLE.

Differences from DB Series Dump Box (page 19) indicated by gray highlight above.

H&H XL Series Dump Box Trailer


Standard Features • 25/16” Adjustable height coupler. • 7000lb dropleg jack. • Safety chains with snap hooks. • 6” Hot mill structural channel steel tongue. • 8” Hot mill structural channel steel frame. • 81” Interior box width. • 24” tall, 12-gauge formed steel sides. • Standard side board provisions & tarp brackets. • Barn door gate. • 7-gauge steel floor. • Scissor Lift – 2-way 5x16 cylinder. • 12v hydraulic pump – 3000 PSI • Dual purpose pump and tool box. • Weatherproof 2-button remote. • 12v deep cycle battery. • 12v trickle charger. • Equalized slipper spring straight axle suspension. • 4-wheel 12” electric drum brakes with break-away kit. • ST235/80R16 trailer radials on 8-bolt white wheels. • Steel fenders. • 6’ long, 3” heavy service ramps with carrier – 3000lb

load rating each. • Full LED, DOT compliant lighting. • Wiring in seamless PVC conduit.

Upgrade Options Drop Axle Suspension Upgrade Gooseneck Hitch Combo gate (opens to top, bottom, or can be swung around to side) Spare Tire & Wheel Spare Tire Mount – placed on in front of fender on curbside Cordless Remote Solar Charger for 12V Battery Rollover Tarp – installed

The ultimate commercial grade dump box trailer. With its wide 81” interior box width, it is capable of carrying small tractors, excavators, and skid loaders from site to site using its self-contained loading ramps while performing all the jobs you would expect an industrial dump box trailer to do once you get there! Nearly 50-degrees of vertical dumping ability, and six or seven ton dumping capacities, make this the one trailer that you’ll never get tired of using!

Model Size Description DBL 12’ 6T .......................... 102”x12’ length box .................................. DB Series Rock & Material Handling trailer, 12000lb GVWR DBL 12’ 7T .......................... 102”x12’ length box .................................. DB Series Rock & Material Handling trailer, 14000lb GVWR DBL 14’ 7T .......................... 102”x14’ length box .................................. DB Series Rock & Material Handling trailer, 14000lb GVWR

WARNING: H&H DOES NOT RECOMMEND TILTING THE DUMP BED WHEN THE TRAILER IS NOT COUPLED TO THE TOW VEHICLE.

Model shown with combo gate.

H&H DB Series Dump Box Trailer



Sapphire Blue



Upgrade Options D-Rings 10000lb GVWR package 12000lb GVWR package Headache Rack Upgrade 4ft All Steel Dovetail Ramps Gooseneck Coupler

Mode Description HDL16 HI FLATBED ..................... 102”x16’ Flatbed Straight Hi-Deck HDL18 HI FLATBED ..................... 102”x18' Flatbed Straight Hi-Deck HDL20 HI FLATBED ..................... 102”x20' Flatbed Straight Hi-Deck

Standard Features • 6” deep C-channel steel tongue extended above the

suspension provides deck height over the tires with unmatched strength.

• 5” channel steel main frame with 3” channel steel crossmembers on 16” center spacing.

• 5” channel steel rub rails with stake pockets take more abuse than flat steel rub rails!

• Extra thick 10-gauge formed stake pockets on 24” spacing.

• 25/16” adjustable height coupler. • (2) 3500lb axles with 4 wheel electric brakes with

break-away kit and battery and equalized leaf spring suspension.

• 7000lb dropleg jack in set-back position for more tailgate clearance.

• Treated 2x8 wood decking, 101” wide. • ST205/75R15 radial tires on white wheels with mud

flaps. • Full LED, DOT compliant lighting. • Wiring enclosed in conduit. • Black powder coating standard.

H&H HDL Light Duty Hi-Deck Trailer

NO Fenders for easy to

load access!



Sapphire Blue



The very best flat deck trailer money can buy.

Why is the H&H Hi-Deck trailer better? • Standard torque tube system eliminates any unwanted side-to-side twist! If you’ve ever pulled a trailer without

these, you will notice the difference immediately on an H&H. • Complete wide flange 12” wide I-beam frame and neck. No cheap channel necks! • Standard drop-down nose on neck eliminates excessive coupler flex under heavy load…this eliminates that

“jerking” sensation you’ve felt from the driver’s seat on other trailers. • 25/16” adjustable height coupler is stronger, has more travel length, and allows you to “level” the deck, no matter

what tow vehicle you use. • Dual 12000lb spring loaded drop-leg jack standard. Spring loaded foot retracts automatically for easy stowing. • 3” channel steel crossmembers full weld conjoined to frame on 16” centers. Semi-trailer style crossmembers

give you the ultimate trailer. • Custom cut and fitted bi-fold high tensile strength steel neck gussets. • Standard chain storage tray included on every trailer at front of deck. • 10 gauge stake pockets 16” OC with inverted rub rails. Twice the thickness and twice the weight of our

competition! • Stronger, 5” channel steel rub rails can take bumping from forklifts or loaders without waving up or bending. • Treated 2x8 wood flooring. • Heavier 80 Series radial tires carry more weight than any other E rated tire on the market. • Custom H&H mud flaps. • LED lighting and break-away brake actuation system. • The best dovetail options in the industry! Our standard convertible dovetail set the world on its ear, and then we

came out with our convertible dovetail with bobcat ramps! See them in person and you’ll know why they are the #1 choice of professional trailer users all over the United States and Canada!

H&H Hi-Deck Trailers

Tag Chassis


Model Deck Width Deck Length H20' STRAIGHT ................................................... 102” ........................................................ 20’ H25’ STRAIGHT ................................................... 102” ........................................................ 25’ H30' STRAIGHT ................................................... 102” ........................................................ 30’ H35’ STRAIGHT ................................................... 102” ........................................................ 35’ H40’ STRAIGHT ................................................... 102” ........................................................ 40’

Model Deck Width Deck Length HD20’ STRAIGHT ................................................. 102” ........................................................ 20’ HD25’ STRAIGHT ................................................. 102” ........................................................ 25’ HD30’ STRAIGHT ................................................. 102” ........................................................ 30’ HD35’ STRAIGHT ................................................. 102” ........................................................ 35’ HD40’ STRAIGHT ................................................. 102” ........................................................ 40’

Standard Features • 12” wide flange 14lb/ft I-beam frame and neck –

highest strength to weight ratio – your best value! • Tandem 7000lb slipper sprung axles with 4-wheel

brakes. Spring axles allow for better off-road weight handling.

• 14000lb GVWR

• 37” Deck Height

Standard Features • Heavier 12” wide flange 19lb/ft I-Beam frame and neck – built

for heavy service! • Tandem 10000lb slipper sprung axles with 4-wheel brakes.

Spring axles allow for better off-road weight handling. • 20000lb GVWR. • 37” Deck Height

• 35’ and 40’ lengths include bridge under frame option standard.

Model shown to right with optional convertible dovetail with bobcat ramps and spare wheel mount.

H&H Standard Hi-Deck Trailers

H&H Heavy Frame Hi-Deck Trailers

Model shown to right with optional convertible dovetail with fold-over ramps.



Sapphire Blue



Dovetail Note: All dovetails add 5’ to the overall length of the trailer Convertible Dovetail with Pull-out Ramps

Our exclusive convertible dovetail gives you the best of both worlds! It can be a flat, level area for hauling cargo or with a quick flip of the hinged mechanism; it converts to a sloped dovetail for easy loading and unloading of wheeled machinery. 3”x 5' heavy-duty, pull-out ramps and carrier included (3000lb load rating each)!

Convertible Dovetail with Fold-Over Ramps Our exclusive convertible dovetail with multifunction comes complete with a two heavy-duty, hinged fold-over ramps.

Convertible Dovetail with Deluxe Bobcat Ramps Super strong, spring-loaded wide bobcat ramps with a spring assisted center lift panel convertible dovetail. Lay your ramps forward, lift and lock the center panel and the entire dovetail can be used as a flat floor.

Super Deluxe Dovetail & Bobcat Ramps with Double-spring Assist New, full width bobcat ramps with double-spring assist allows for a fixed dovetail and ease of use. No more heavy lifting and strain on your back and still super strong!

Lo-pro Pierced Beam Frame Option - Lower Deck approximately 4.5 Suspensions GVWR upgrades available only on Heavy Duty 19lb frames Upgrade to (2) 7000 torsion axles – 14000lb GVWR. Standard Frames Only Triple 7000lb axles with electric brakes – 22500lb GVWR. Heavy Duty Frames Only Tandem 12000lb axles with electric brakes – 25900lb GVWR. Heavy Duty Frames Only *Tandem 15000lb axles with electric brakes – 30000lb GVWR. Heavy Duty Frames Only (*upgrades to 26lb/ft I-beam)

Coupler, Chassis, and Deck Tag Type Chassis - converts gooseneck to bumper pull, includes adjustable pintle or 25/16" coupler King Pin Coupler Insert Gooseneck Height - Increase height 12 inches Bridge Under Frame(standard on 35' & 40' models) Upper Deck on Gooseneck with Rub Rails & Stake Pockets Steel Floor (per foot) Kiln Dried Treated Lumber "D" Rings ***Not recessed*** (each) Jack 2-speed Drive Dual 12K jacks – Heavy Duty Hi-Deck Big Foot Gooseneck Hydraulic Electric Dual 12KJacks - complete with hydraulic cylinders, hoses, & battery Lighting Extra Marker Lights - each Mid-ship Turn Lights Storage Mesh Chain Tray in Upper Neck 24" Wide Under Deck Toolbox - driver's side front corner 48" Wide Under Deck Toolbox - driver's side front corner - available on 20 & 24K suspensions Tire/Wheel Spare Wheel, Tire & Mount

H&H Hi-Deck Options Section

Torque Tube

Bridge Under Frame

HH&&HH TTrraaiilleerrss,, LLLLCC

C Series Steel Models Economy Value Trailers

1 Year Limited Warranty on Frame, Tongue, and Crossmembers

PAGE 35 .......... C SERIES SOLID SIDED SINGLE AXLE UTILITY TRAILERS PAGE 36 .......... C SERIES HEAVY DUTY FLATBED TRAILERS PAGE 37 .......... C SERIES SPEEDLOADER™ MXC

PLEASE NOTE: H&H TRAILERS LLC STRONGLY RECOMMENDS HITCHING YOUR TRAILER TO YOUR TOW VEHICLE BEFORE LOADING! PHOTOS MAY SHOW OPTIONAL FEATURES.

H&H Trailers® is a registered trademark of H&H Trailers LLC. ©2010/2011 H&H Trailers LLC. All rights reserved.



Sapphire Blue Signal Red Safety Orange

H&H TRAILERS LLC STRONGLY RECOMMENDS HITCHING YOUR TRAILER TO YOUR TOW VEHICLE BEFORE LOADING! PHOTOS MAY SHOW OPTIONAL EQUIPMENT. MODELS AND OPTIONS ARE SUBJECT TO CHANGE H&H IA Steel Trailer – Page 35

Popular Upgrade Options 2x8 Treated Wood Decking

Spare Tire & Wheel Spare Carrier

2000lb Swivel-Up Jack Bi-fold Upgrade

Full LED Lighting

Standard Features • 12” Tall, 14-gauge formed steel front & sides. • 3” channel steel tilting or non-tilting tongue. • 2” A-frame Posi-Lock coupler with dual safety chains. • 3500lb spring idler axle with 5-bolt hubs – 2600lb GVWR. • ST175/13 C rated bias tires mounted on white wheels. • 2x8 wood decking. • Full DOT compliant lighting with 4-prong flat trailer plug. • 2000lb coupler mounted storage jack with foot. • Steel radius fenders. • 4 mini D-rings mounted to the bed. • 48” tall rear ramp gate with fold forward storage standard on

flatbed models. 1000lb load rating.

Tiltbed Models Description Deck Width SSC 5x10E SSC ................... C Series 5x10’ Tiltbed, 12” Solid Side ........... 60” SSC 5x12E SSC ................... C Series 5x12’ Tiltbed, 12” Solid Side ........... 60”

SSC 8x10E SSC ................... C Series 8x10’ Tiltbed. 12” Solid Side ........... 76” SSC 8x12E SSC ................... C Series 8x12’ Tiltbed, 12” Solid Side ........... 76” Flatbed Models Description Deck Width SSC 5x8F SSC ..................... C Series 5x8’ Flatbed, 12” Solid Side ............ 60” SSC 5x10F SSC ................... C Series 5x10’ Flatbed, 12” Solid Side .......... 60” SSC 5x12F SSC ................... C Series 5x12’ Flatbed, 12” Solid Side .......... 60”

SSC 8x10F SSC ................... C Series 8x10’ Flatbed. 12” Solid Side .......... 76” SSC 8x12F SSC ................... C Series 8x12’ Flatbed, 12” Solid Side .......... 76”

H&H C Series Solid Sided Single Axle Utility Trailer


Standard Features • Full structural 4” channel steel tongue (wrapped) and 5” channel frame.

• 2 5/16” A-frame coupler with dual safety chains. • 2000lb coupler mounted jack with foot.

• 2x8 wood decking. • Extra thick stake pockets – 2 per side.

• Ramp hook bar. • 2-3500lb brake axle with breakaway kit and battery.

• ST205-15 C rated bias tires on white wheels – 7000lb GVWR. • Full DOT compliant lighting.

Model Description Deck Width Deck Length 8.5HDC12 ............... C Series8.5x12’ Heavy Duty Flatbed ...................... 82” ......................... 12 feet 8.5HDC14 ............... C Series 8.5x14’ Heavy Duty Flatbed ..................... 82” ......................... 14 feet 8.5HDC16 ............... C Series 8.5x16’ Heavy Duty Flatbed ..................... 82” ......................... 16 feet 8.5HDC18 ............... C Series 8.5x18’ Heavy Duty Flatbed ..................... 82” ......................... 18 feet

Available Upgrades 2X8 Treated Wood All Steel 2’ Dovetail

2”x 5’ Ramps and Carrier 2”x 5’ Ramps (loose)

Removable Teardrop Fenders Headache Rack Full LED Lighting

Additional Stake pockets – priced per each 5000lb Set-back Jack Radial Tire Upgrade Spare Wheel & Tire Spare Tire Mount

Models shown with optional dovetail and ramps with carrier.

H&H C Series Heavy Duty Flatbed Trailer

HDC dovetail option.


Standard Features

• Full structural 4” channel steel tongue (wrapped) and 5” channel steel frame. • 2 5/16” A-frame coupler with dual safety chains.

• 2000lb coupler mounted jack with foot. • 2x8 wood decking.

• Extra thick stake pockets – 2 per side. • 2-3500lb brake axle with breakaway kit and battery.

• ST205-15 C rated bias tires on white wheels – 7000lb GVWR. • Full DOT compliant lighting.

• Reverse dovetail with taper cut under deck for lower approach angle.

Model Description Deck Width Deck Length T8.5HD18 MXC MAN/HYD ........ 8.5x18ft SpeedLoader™ MXC Manual Tilt Trailer ............. 82” ........................ 18’ T8.5HD20 MXC MAN/HYD ........ 8.5x20ft SpeedLoader™ MXC Manual Tilt Trailer ............. 82” ........................ 20’

Available Upgrades • 2x8 Treated Wood Floor • Removable Teardrop Fenders

• Radial Tire Upgrade • Headache Rack

• 5000lb Set-back Jack • Additional Stake pockets

• Spare Wheel & Tire • Spare Wheel & Tire Mount • LED Tail Upgrade – includes SlimLine LED taillights, SlimLine 3-bar light, center marker

recessed into rear bumper & 2 LED side marker lights on tail.

How the Manual Tilt Works: The powerful hydraulic ram jack is operated by hand to tilt the bed up (Much faster than handling ramps.) Slowly release the pressure valve on the jack to lower the bed down at the rate you choose.

H&H C Series MXC Manual Tiltbed Trailer

HH && HH TT rr aa ii ll ee rr ss ,, LL LL CC 22 22 22 NN .. 11 ss tt SS tt rr ee ee tt ,, CC ll aa rr ii nn dd aa ,, II AA 55 11 66 33 22 77 11 22 .. 55 44 22 .. 22 66 11 88 PP 77 11 22 .. 55 44 22 .. 22 77 00 77 FF

H&H Trailers®, the wing logo, & SpeedLoader are registered trademarks of H&H Trailers LLC. ©201-20132 H&H Trailers LLC. All rights reserved. Published 8/1/2012. Revised 3/18/2013

H&H Trailers, LLC - R K Belt & · PDF filefor hauling your golf car or ATV. Standard stake...

Documents

Transcript of H&H Trailers, LLC - R K Belt & · PDF filefor hauling your golf car or ATV. Standard stake...