HF Radio Communications 2060 HF Telephone interconnect
Transcript of HF Radio Communications 2060 HF Telephone interconnect
HF Radio Communications
BARRETT
2060 HF Telephone interconnect
2060
Fully automatic telephone interconnect
Enables hf radio network stations to become part of theinternational telephone network
Can call up to 98 programmable pre-set telephonenumbers
Comprehensive call logging for charging purposes andremote supervision by a dial up computer link.
The Barrett 2060, a fully automatic telephone interconnect, enables high frequency radio
network stations to become part of the international telephone network. HF stations can
direct dial any telephone number on the international telephone network. Additionally
Stations can call up to 98 programmable pre-set telephone numbers stored in the 2060
telephone interconnect. Telephone subscribers on the international telephone network can
dial into the 2060 interconnect and call any station on the HF network.
Independent of all other communications networks
MADE IN AUSTRALIA
BCB20600/6
www.barrettcommunications.com.au
HF Radio Communications
BARRETT
2050 Front panel
2020 Email Fax & Data System
BCB20600/6
MADE IN AUSTRALIA
www.barrettcommunications.com.au
The Barrett 2060 interconnect also supports MIL-STD 188 - 141B ALEallowing ALE networks to now have fully automatic access to thetelephone network.
The Barrett 2060 interconnect provides full network managementfacilities including variable access levels for HF stations calling thetelephone network, comprehensive call logging for charging purposesand remote supervision by a dial up computer link.
Recordable voice messages allows systems greetings andinstructions to be in any language - stored in non-volatile Flash RAM.
Should the selectable standard international telephone call progresstones not operate in certain countries the 2060 can record, learn andstore these non-standard call progress tones on site.
4096 log entries of system activity are stored in the 2060 before adownload is required.
When not handling traffic, if enabled, periodic beacons are sent on allchannels at regular intervals. This allows the HF users to evaluate thebest channel to use with the 2060 base station.
Editing and logged call information download via the telephonenetwork. Using a PC loaded with Barrett 2060 remote software,parameters, access levels and call logging information can bedownloaded via the telephone network. This allows 2060's to beinstalled at remote locations and be controlled from a central point.
Multilingual
"Learn" function for non-standard call progresstones
Large log capacity
Periodic beacons
Remote parameters
MIL-STD 188-141B, FED STD 1045ALE
Call charging
DTMF or Decadic dialling
Access levels and barring for individual users
DSP noise reduction
Manual /Automatic VOX
Emergency Selcalls
98 stored telephone numbers
ALE simplifies the operation of the system as the HF network user needonly enter the 2060 address and a telephone number required and thetelephone caller has only to enter the mobile number required. TheALEsystem establishes the link between the two.
Call charging information stored in the 2060 can either be based on callduration or information provided by 12/16 kHz or 50 Hz meteringpulses. (Note:- The Telco providing the line connected to the 2060 mustbe requested to provide these metering pulses).
To allow operation of the 2060 on older exchanges Decadic dialling aswell as DTMF can be selected.
Stations within the HF network can be allocated individual accesslevels in relation to the telephone network, i.e. local calls only, full ISDcall access, specific number barring or complete barring.
DSP noise reduction system that provides clearer reception from theHF network can be toggled on or off by the telephone caller by keying55 on their telephone.
Should telephone connection be of such poor quality that the automaticVOX becomes unstable, the telephone caller can switch to manualVOX by keying 88 on their telephone and use the hash key on theirtelephone to change the 2060 from transmit to receive.
The telephone caller can request the frequency of the currentlyselected channel in kHz by keying 77 on their telephone keypad.Keying 55 will provide the software version, PA temperature, supplyvoltage during transmit and the percentage of billing storage used fromthe 2060 and its associated 2050. Full base station operation featureswhen operated in manual mode. When operated in manual mode the2060 provides a full manual control of the associated 2050 transceiver.
While scanning, all types of emergency calls received will beannunciated both audibly and visually on the associated 2050transceiver (if a front panel is fitted).
98 pre-programmed telephone numbers stored in the 2060 can beaccessed by HF mobiles or base stations that only have Selcall and notthe full dial Telcall option fitted.
2060 system parameters by voice annunciation
2050 vehicle mounting options
2060
2050 Front panel
2060 HF Telephone interconnect
HF LandMobiles
InternationalTelephoneNetwork
HF Base Stations
HF Radio Communications
BARRETT
BCB20600/6
www.barrettcommunications.com.au
2060 HF Telephoneinterconnectspecifications
General Specifications
Standards
Power input
Scanning capacity
Operating temperature
Dialling modes
Dialled number
Transceiver control
Transceiver Tx, Rx
Transceiver PTT output
Frequency response
Hybrid system
Phone line levels
VOX sensitivity
Phone line connector
Remote supervisory
Telecom line
Call progress tones
Exceeds/complies with Australian/ New Zealandstandard AS/NZS 609501:2003 - AMPT 1:2008AS/ACIF 5002:2005 -AS/ACIF 5004:2006
13.8 V DC (11-15 V), > 400 mA
30 channels maximum
0°C to 50°C
DTMF of Decadic
16 digit maximum
RS-232, 9600bd. Barrett control syntax
600 ohm balanced 0 dBm
audio levels adjustable by menu option
Open collector to ground
300 to 2800 Hz ± 2 dB
DSP based continuously balancing
Adaption speed less than 0.5 seconds
Ultimate balance better than 40 dB
Input from line -9 dBm
Output to line -9 dBm
Impedance 600 ohm
Approx 16 dB below phone line level i.e. 25 dBm
RJ-45
Via on-board modem -V.34bis control (33.6 kbs)
Standard 2 wire automatic exchange preferably withline reversal "B" party "off hook" and "on hook"
If call charging required - 12/16 kHz or 50 Hz meteringpulses
Will respond to standard call progress tones,selectable by country. Has a learn function for non-standard tones
2060 remote control head
185 mm
270 mm
70 m
m
70 m
m185 m
m
2060 topview
2060 sideview
No 149438
Barrett 2060 HF Telephone interconnect rear panel
270 mm
European Office:Barrett Europe Limited, Unit 9, Fulcrum 2, Victory Park,Solent Way, Whiteley,PO15 7FN UNITED KINGDOMTel: +44 1489 880332Fax: +44 1489 565422email: [email protected]
Head Office:Barrett Communications Pty LtdP O Box 1214, Bibra Lake WA 6965 AUSTRALIAToll Free Tel: 1800 999 580 Tel: +618 9434 1700 Fax: +618 9418 6757email: [email protected]
Americas Office:Barrett USA LLC 15941 W. 65th StreetSuite 373, Shawnee, Kansas 66217 USATel: +1 913 671 9068email: [email protected]