Heating system UDEN-S
-
Upload
selectsage -
Category
Technology
-
view
82 -
download
1
Transcript of Heating system UDEN-S
energy-efficient independent electrical heating
radiation of infrared long-wave heating corresponding to the human body radiation spectrum
environmentally friendly and economical heating
UDEN-S means:UDEN-S means:
infrared heating systems require 30 to 40 per cent less power than convectors or furnaces
they are easy to install and provide comfortable temperature conditions
they quickly eliminate the problem of cold and wet walls and corners
Why choose UDEN-S heating?Why choose UDEN-S heating?
The possibility of completely automated work of heating systems enables maintaining necessary microclimate in every separate room.
It enables redistribution and reducing of existing power networks load.
Infrared heating is 1,5 to 2 times more economical than others.
Why choose UDEN-S heating?Why choose UDEN-S heating?
Thus, infrared long-wave heating systems are the best to manage heating of rooms of any purpose. Meanwhile, their work requires minimum time and is maximally economical.
That is why this technology serves as a basis for production of UDEN-S heaters.
Why choose UDEN-S heating?Why choose UDEN-S heating?
UNIVERASLITY
CONVENIENCE
AVAILABILITY
EFFICIENCY
RELIABILITY
SAFETY
DESIGN
MODERNITY
ADVANTAGES OF UDEN-S HEATINGADVANTAGES OF UDEN-S HEATING
WALL PANELSWALL PANELS
Denomination of characteristics and sizesModel
UDEN-5OO UDEN-700Nominal consumption power, kW 0.5 0.7Nominal voltage, W 220 220Frequency, Hz 50 50Overall dimensions, m, at most:
width
length
thickness
0.475
0.8
0.013
0,475
1
0.013Emitting area S, m2 0.390 0.475Cubic capacity of heated airspace, m3 20-25 30-35Heated airspace, m2, by h=2,5 m 8-10 12-14Surface operating temperature, Co, at most 80+/-5 80+/-5Weight, kg, at most 7.6 9.0Type of installation wall wallTypical operation continuous continuous
Heaters installed under windows or balcony doors not only provide warmth, but also
prevent cold air from getting into the room.
WALL PANELSWALL PANELS
HEATED PLINTHSHEATED PLINTHS
Denomination of characteristics and sizesModel
UDEN-100 UDEN-150 UDEN-200Nominal consumption power, kW 0.1 0.15 0.2Nominal voltage, W 220 220 220Frequency, Hz 50 50 50Overall dimensions, m, at most:
•width
•length
•thickness
0.122
0.5
0.013
0.122
0.75
0.013
0.122
1.0
0.013Emitting area S, m2 0.069 0.104 0.139Cubic capacity of heated airspace, m3 4-6 6-9 8-12Heated airspace, m2, by h=2,5 m 1.6-2.4 2.4-3.6 3.2-4.8Surface operating temperature, Co, at most
80+/-5 80+/-5 80+/-5
Weight, kg, at most 0.5 1.0 1.8Type of installation wall wall wallTypical operation continuous continuous continuous
A heated plinth directly A heated plinth directly heats the wall surface heats the wall surface
(tempering of buildings) (tempering of buildings) creating a kind of a heat creating a kind of a heat
shield that prevents cold air shield that prevents cold air from getting inside.from getting inside.
HEATED PLINTHSHEATED PLINTHS
CEILING PANELSCEILING PANELS
Denomination of characteristics and sizes UDEN-500 П
Nominal consumption power, kW 0.5Nominal voltage, W 220Frequency, Hz 50Overall dimensions, m, at most:
•width
•length
•thickness
0.6
0.6
0.015Emitting area S, m2 0.360Cubic capacity of heated airspace, m3 20-25Heated airspace, m2, by h=2,5 m 8-10Surface operating temperature, C o, at most 90+/-5Weight, kg, at most 6.0Type of installation ceilingTypical operation continuou
s
Using ceiling panels in shops enables keeping the
walls open for placing goods
CEILING PANELSCEILING PANELS
UDEN-S HEATING IS CERTIFIED FOR UDEN-S HEATING IS CERTIFIED FOR USING IN MEDICAL INSTITUTIONSUSING IN MEDICAL INSTITUTIONS
UDEN-S HEATING IS CERTIFIED FOR UDEN-S HEATING IS CERTIFIED FOR USING IN EDUCATIONAL INSTITUTIONSUSING IN EDUCATIONAL INSTITUTIONS
Enable:Enable:Energy saving (the duration of system working is 5 to 7 hours a day).
Redistribution of heaters’ power – the house heating system is cascaded, not simultaneous, which reduces power network load considerably.
Maintaining desired temperature with people absent in the room during long time.
Automation of the whole heating system or separate heaters.
THERMOSTATS IN HEATING THERMOSTATS IN HEATING SYSTEMSSYSTEMS
A regular electromechanical indoor heat regulator. The device is equipped with a temperature sensor that closes or breaks commutation contacts when particular temperature is reached. The temperature is set by turning the regulator on the thermostat body and is maintained precisely up to 1°C. Range: +8С...+30°С.
РТ-16/П 01 thermostats are applied when installing heaters be means of energy wire with a plug. The thermostat is plugged in the socket, and the panel is connected directly to the thermostat. Range: 0,0…+99,5ºС. Accuracy of maintaining temperature: 0,1°C.
THERMOSTATS IN HEATING THERMOSTATS IN HEATING SYSTEMSSYSTEMS
Automatic weekly thermoregulator, which is programmed, and has a wide range of settings for changing temperature even in your absence. Setting six intervals for week days and two for weekends is possible. There is a control locking function – protection from children’s reach. Range: 5...90 °С
Touch-sensitive programmed weekly indoor thermoregulator. Setting six intervals for week days and two for weekends is possible. There is a control locking function – protection from children’s reach. Range: 5...90 °С
THERMOSTATS IN HEATING THERMOSTATS IN HEATING SYSTEMSSYSTEMS
COMBINATION OF ‘GARNET BRACELET’ COMBINATION OF ‘GARNET BRACELET’ WITH A PANEL FROM THE CLASSIC SERIESWITH A PANEL FROM THE CLASSIC SERIES
INTERIOR COLOURSINTERIOR COLOURS
Customized order possible on the example of ‘Annet’.The panel colour is matching the interior.
AN INTERIOR WITH A PANELAN INTERIOR WITH A PANEL
OVERALL SPACE – 48,25 M2
CEILING HEIGHT – 2,6 M
CALCULATED POWER FOR 1 M 2 – 0,062 KW
OVERALL POWER – 3 KW
SYSTEM WORKING TIME – 6 HOURS
ELECTRIC POWER CONSUMPTION – 540 KW PER MONTH
An example of heating system An example of heating system adjustment for a 2-room apartment adjustment for a 2-room apartment
Visit our website www.tov-imb.com.ua
Order technical and economic calculation of heating system setting using the site, by calling +38067-45-66-119 or via e-mail: [email protected]
Order a necessary number of heaters.
REMEMBER!!!Our company provides professional installation
of UDEN-S heating systems
WHAT DO YOU DO NEXT?WHAT DO YOU DO NEXT?