HEA

LTH

& B

EAUT

Y

216

HEALTH & BEAUTY

216

HEA

LTH

& B

EAUT

Y

217

LL9023 Pocket First Aid Kit• First Aid Kit in red nylon zippered pouch with

black zip.• Contents:• 1pc cleansing wipe • 2pcs antiseptic wipe • 6pcs alcohol prep pads • 4pcs H-shaped adhesive bandage

(tga approved) • 4pcs small oval adhesive bandage

(tga approved) • 1 pc metal tweezer

Colour: Item Size: 145 x 95 x 8 (LxHxD)mm (Size variations considered acceptable).Screen Print: 70 x 50 (LxH)mm. 4CP Digital Transfer: 50 x 45 (LxH)mm.

LL9017 Traveller First Aid KitFirst Aid Kit in PP lock caseContents:• 3pcs cotton bandages • 4pcs adhesive bandage (tga approved) • 1roll adhesive tape• 1pc Scissors• 3pcs safety pins• 8pcs cotton sticks• 1pc cotton ball roll

Colour: Item Size: 120 x 87 x 33 (LxHxD)mm.Screen Print: Lid – 85 x 50 (LxH)mm. 4CP Digital Direct: Lid – 80 x 45 (LxH)mm. 4CP Standard Label: Lid – 71 x 41 (LxH)mm.

LL4680 Pack Tissues – 10 Pack.• Pack of 10, 2 layer tissues in resealable pocket sized pack. • Tissue size - 195 x 205 (LxH)mm. • Suitable for all age categories. • Can triple as a business card, brochure and promotional item.

Colour: Item Size: Pack size – 52 x 100 x 24 (LxHxD)mm, Tissue Size – 195 x 205 (LxH)mm.4CP Standard Label: 30 x 55 (LxH)mm.

HEA

LTH

& B

EAUT

Y

218

LL4659 Anti Bacterial Wipes in Pouch• 20 x Anti bacterial, citrus scented non woven wipes

in pouch.

Colour: Item Size: Pack –150 x 100 x 29 (LxHxD)mm, Wipes – 200 x 150 (LxH)mm. 4CP Standard Label: 71 x 41 (LxH)mm.

LL3027 Anti Bacterial Wet Wipes in Pouch • 10 x Citrus scented anti bacterial non woven hand wipes

in pouch.• Resealable sticker.

Colour: Item Size: 172 x 134 x 15 (LxHxD)mm. Standard Label: 55 x 30 (LxH)mm.

LL4658 Anti Bacterial Wet Wipes in Canister• 24 x Anti bacterial non woven hand wipes

in foil sealed flip lid canister with ballchain attachment.

Colour: Item Size: 83mmH x 50mmDia.4CP Standard Label: 94 x 42 (LxH)mm plus Statutory Information Section – 26 x 42 (LxH)mm (Label Size – 160 x 52 (LxH)mm).

PLEASE CONSIDER THE ENVIRONMENT AND DON’T FLUSH WIPES DOWN THE TOILET. WE RECOMMEND DISPOSING OF RESPONSIBLY IN RUBBISH BINS.

HEA

LTH

& B

EAUT

Y

219

LL4675 15ml Spray Pump Hand Sanitiser• 15ml citrus scented spray pump hand sanitiser.• Trigger protector which stops spills.• Compact, hand bag, sport bag, travel bag friendly. • 62% alcohol content.

Colour: Item Size: 46 x 84 x 10 (LxHxD)mm. 4CP Standard Label: 30 x 55 (LxH)mm.

LL726 60ml Gel Hand Sanitiser • 60ml alcohol based clear gel hand sanitiser with

moisturiser and Vitamin E in clear plastic squeeze bottle.• 62% alcohol content.

Colour: Item Size: 45 x 97 x 26 (LxHxD)mm. 4CP Standard Label: 30 x 55 (LxH)mm.

LL4673 30ml Liquid Hand Sanitiser with Carabiner• 30ml alcohol based clear gel with moisturiser and

Vitamin E in plastic squeeze bottle.• Kills most germs and leaves hands feeling refreshed

and clean. • 62% alcohol content.

Colour: Item Size: 48 x 95 x 24 (LxHxD)mm.4CP Standard Label: 32mmDia, 33 x 33 (LxH)mm.

HEA

LTH

& B

EAUT

Y

220

LL2004 Clear Rectangular 6 Compartment Pill Box• Frosted clear rectangular pill box with 6 large

compartments with snap lock lid.

Colour: Frosted ClearItem Size: 86 x 57 x 20 (LxHxD)mm. Pad Print: 60 x 31 (LxH)mm.

LL857 Stitch-In-Time Sewing Kit • Travel size sewing kit in convenient folding case.• Includes six cotton threads, three safety pins, two

buttons, two studs, needle threader and needle.

Colour: Item Size: 75 x 48 (LxH)mm. Pad Print: 55 x 40 (LxH)mm.4CP Digital Direct: 72 x 45 (LxH)mm, following curve of product (refer line drawing).

220

HEA

LTH

& B

EAUT

Y

221

LL1634 Compact Pop Up Brush / Mirror Set• Compact case opens to reveal black pop

up brush one side and shatter resistant mirror other side.

• Handy travel size.

Colours: Item Size: 75mmDia. Pad Print: 35mmDia.4CP Digital Direct: 25mmDia.

LL683 Reflections Round Folding Mirror• Compact mirror with flip lid that converts

to a stand.• Handy travel size.

Colours: White, ClearItem Size: 63 x 70 (LxH)mm. Pad Print: 50mmDia.4CP Digital Direct: 50mmDIa.

HEA

LTH

& B

EAUT

Y

222

LL2003 Sydney Mini Emery Board Pack • Set of 6 tear away mini emery boards in matchbox

style cardboard pack.

Colour: Item Size: 57 x 60 x 8 (LxHxD)mm.4CP Standard Label: 45mm Diameter, 50 x 50 (LxH)mm.

LL2008 Pink/Blue Salon Size Emery Boards • Two tone emery board in Clear

PVC pouch.• Warning - Colours may change from

shipment to shipment.

Colour: Item Size: 180 x 20 (LxH)mm.Screen Print: Pouch – 80 x 15 (LxH)mm.

LN2007 Custom Print Salon Size Emery Boards • Emery board custom printed up to

4 colour process both sides in Clear PVC pouch.

Colours: Custom. Minimum Quantity: 10,000 units.Item Size: 180 x 20 (LxH)mm.4CP Digital Direct: 180 x 20 (LxH)mm.Lead Time: 4-5 weeks AIR if digital proof approved same day.

HEA

LTH

& B

EAUT

Y

223

LL2006 New Vogue Nail File• Hard case nail file packed

in pouch.

Colours: Item Size: 160 x 20 (LxH)mm. Pad Print: 80 x 13 (LxH)mm.4CP Digital Direct: 160 x 20 (LxH)mm (Follow curve of product - refer line drawing).

LL0166 Folding Nail File• Hard case foldable nail file in pouch.

Colour: Item Size: Unfolded – 160 x 18 x 9 (LxHxD)mm, Folded – 94 x 18 (LxH)mm. 4CP Digital Direct: Left Side – 65 x 18 (LxH)mm, Right Side – 60 x 18 (LxH)mm.

IMPORTANT – Items illustrated are to show personalisation techniques and not to imply they haven been supplied to owners of the particular trademark. Personalised items are only for sale to the owners of that particular trademark. Some colours may vary from shipment to shipment – if colour is critical request sample and include with order. Stipples and screens are best avoided on spot, screen and pad printed items. Refer artwork for acceptance prior to committing delivery (if in doubt). Whilst every effort is made to ensure accuracy of colours in these products, they should be used as a guide only. Product colours depicted may vary from actual products due to photographic reproduction. As we continue to improve our range changes may be made without prior notice.

Supplier Partner Requirements Statement

We are committed to providing a safe and sustainable workplace for our employees, this also extends to the operations of our Supplier Partners which operate in a diverse range of environments across the world. The following is a list of expectations for Supplier Partners to clearly articulate what we expect them to adhere to for us to do business with them.1. Under no circumstances will Supply Partners employ or utilise

child or prison labor in their own or associated companies.2. In all instances employees will work for Supply Partners of their

own free will and without compulsion.3. Supply Partners will provide a safe working environment for their

employees and contractors and review incidences wherein people have been injured or the potential to be injured.

4. Employees of Supply Partners will be paid at prescribed rates for all hours worked and in accordance with agreements freely entered into by employees. Conditions of employment will meet or exceed local standards as prescribed by relevant authorities. We value Supply Partners who retain employees as a consequence of the environment and positive culture of their workplace.

5. Hazardous materials are managed by Supply Partners throughout the manufacturing processes, with the objective of reducing employee or contractor exposure to same.

6. Fire Safety is an ongoing area of vigilance for Supply Partners, who hold regular evacuation drills in relevant areas.

7. Supply Partners will minimize their impact on their direct environment modifying work practices where appropriate to reduce waste and emissions. Supply Partners will work with their own suppliers to seek to reduce waste and emissions throughout the supply chain.

8. Quality control and assurance procedures are in place and actively managed to ensure products are of the best quality possible.

Maintenance of these standards are vital to us as good corporate citizens and we are sincere in consistently pursuing our Core Values which include that we operate with integrity and honesty. We constantly and consistently look to partner with suppliers who share this value and live it out through the expectations articulated above.We constantly monitor our supplier’s factories by personal inspections.

Decoration TechniquesPad Printing – An inked image is transferred from a photo-etched plate to a thick, soft, silicone pad, which is then pressed against the product. One Pantone colour is printed at a time, and suitable for most designs with tight registration.

Screen Printing – The direct imprinting of a design onto the surface of a product. Image is pressed through tensioned nylon mesh, leaving a paint-like appearance. Sharper imprint than pad printing. Available on a select range of products.

Laser Engraving – A permanent decoration technique. Light burns an image into a substrate. Works best when the item’s surface is a different colour than the substrate.

Debossing / Embossing – Techniques in which a metal die is created from artwork. The die is then heat-pressed onto the material, leaving an image of the artwork in recess (Debossing) or a 3D effect (Embossing) as the impression is raised. Metal products are embossed by stamping the material with the die.

Epoxy Dome – A thick clear polyurethane coating applied directly to a decorated product.

Embroidery – A traditional method of decorating textiles with needle and coloured thread. Available for some plush items indent.

4 Colour Process (4CP)

Digital Direct Print – Photo quality images and graphics printed directly onto a broad range of products using specialist inkjet printers, producing spectacular results. Four colour process (CMYK) artwork required - white ink is laid down as a 5th colour if needed.

Digital Standard Label – A laser printer reproduces the image in CMYK onto pre-cut gloss White paper labels. Labels are hand applied. Die cutting is available on vinyl deluxe labels.

Digital Transfer Print – Suitable for detailed and multicolour imprints. A computer printer uses special inks to create CMYK transfers designed to be applied to products using heat.

Digital Sublimation Print – A technique using specialist inkjet printer that transfers a CMYK image directly onto materials using heat.

AccreditationOur confectionery packaging facility has been accredited by HACCP – Australia’s food safety certification programme.

Our Power Banks and Wall Chargers are compliant with the necessary Australian / New Zealand standards. Look for the RCM symbol. Copies of compliance certificates are available upon request. Covered by a 12 month limited warranty.

1YEARWARRANTY

In- House Decoration Methods

Items in stock and decorated in Australia. Despatch is typically 3 working days from approval of artwork (large quantities subject to acceptance). Free 24 express despatch available pending criteria.

These items can be identified by the LL code.

A unique range of items that are made and decorated in Asia and USA (quantities that usually start at 500 units). Airfreight delivery is

typically 4 weeks from approval of artwork. Exceptions are items that are sea freighted. These items can be identified by the LN code.

IMPORTANT – Items illustrated are to show personalisation techniques and not to imply they haven been supplied to owners of the par‑ticular trademark. Personalised items are only for sale to the owners of that particular trademark. Some colours may vary from shipment to shipment – if colour is critical request sample and include with order. Stipples and screens are best avoided on spot, screen and pad printed items. Refer artwork for acceptance prior to committing delivery (if in doubt). Whilst every effort is made to ensure accuracy of colours in these products, they should be used as a guide only. Product colours depicted may vary from actual products due to photo‑graphic reproduction. As we continue to improve our range changes may be made without prior notice.

Supplier Partner Requirements Statement

We are committed to providing a safe and sustainable workplace for our employees, this also extends to the operations of our Supplier Partners which operate in a diverse range of environments across the world. The following is a list of expectations for Supplier Partners to clearly articulate what we expect them to adhere to for us to do business with them.1. Under no circumstances will Supply Partners employ or utilise

child or prison labor in their own or associated companies.2. In all instances employees will work for Supply Partners of their

own free will and without compulsion.3. Supply Partners will provide a safe working environment for their

employees and contractors and review incidences wherein people have been injured or the potential to be injured.

4. Employees of Supply Partners will be paid at prescribed rates for all hours worked and in accordance with agreements freely entered into by employees. Conditions of employment will meet or exceed local standards as prescribed by relevant authorities. We value Supply Partners who retain employees as a consequence of the environment and positive culture of their workplace.

5. Hazardous materials are managed by Supply Partners throughout the manufacturing processes, with the objective of reducing employee or contractor exposure to same.

6. Fire Safety is an ongoing area of vigilance for Supply Partners, who hold regular evacuation drills in relevant areas.

7. Supply Partners will minimize their impact on their direct environment modifying work practices where appropriate to reduce waste and emissions. Supply Partners will work with their own suppliers to seek to reduce waste and emissions throughout the supply chain.

8. Quality control and assurance procedures are in place and actively managed to ensure products are of the best quality possible.

Maintenance of these standards are vital to us as good corporate citizens and we are sincere in consistently pursuing our Core Values which include that we operate with integrity and honesty. We constantly and consistently look to partner with suppliers who share this value and live it out through the expectations articulated above.We constantly monitor our supplier’s factories by personal inspections.

Decoration TechniquesPad Printing – An inked image is transferred from a photo‑etched plate to a thick, soft, silicone pad, which is then pressed against the product. One Pantone colour is printed at a time, and suitable for most designs with tight registration.

Screen Printing – The direct imprinting of a design onto the surface of a product. Image is pressed through tensioned nylon mesh, leaving a paint‑like appearance. Sharper imprint than pad printing. Available on a select range of products.

Laser Engraving – A permanent decoration technique. Light burns an image into a substrate. Works best when the item’s surface is a different colour than the substrate.

Debossing / Embossing – Techniques in which a metal die is created from artwork. The die is then heat‑pressed onto the material, leaving an image of the artwork in recess (Debossing) or a 3D effect (Embossing) as the impression is raised. Metal products are embossed by stamping the material with the die.

Epoxy Dome – A thick clear polyurethane coating applied directly to a decorated product.

Embroidery – A traditional method of decorating textiles with needle and coloured thread. Available for some plush items indent.

4 Colour Process (4CP)

Digital Direct Print – Photo quality images and graphics printed directly onto a broad range of products using specialist inkjet printers, producing spectacular results. Four colour process (CMYK) artwork required ‑ white ink is laid down as a 5th colour if needed.

Digital Standard Label – A laser printer reproduces the image in CMYK onto pre‑cut gloss White paper labels. Labels are hand applied. Die cutting is available on vinyl deluxe labels.

Digital Transfer Print – Suitable for detailed and multicolour imprints. A computer printer uses special inks to create CMYK transfers designed to be applied to products using heat.

Digital Sublimation Print – A technique using specialist inkjet printer that transfers a CMYK image directly onto materials using heat.

AccreditationOur confectionery packaging facility has been accredited by HACCP – Australia’s food safety certification programme.

Our Power Banks and Wall Chargers are compliant with the necessary Australian / New Zealand standards. Look for the RCM symbol. Copies of compliance certificates are available upon request. Covered by a 12 month limited warranty.

1YEARWARRANTY

3 DAY DESPATCH CUSTOM MADE PRODUCTSon stock products

24 hour despatch on select products.

4CP Digital Direct

Keytags

Banner pens

Microfibre cloths

Playing cards

Car Fresheners

Laser Engraved

Pad Print

Screen Print

4CP Labels

FREE FREE DispenserFREE

WHEN YOU BUY 1000 PENSSelected styles ex-stock

When you order 200+ Power Banks or Speakers When you order 250+

Cube Breath Mints

Suitcase or VR Headset

MR Promo Cube

*1 per order. Applies to LL079.

FREE When You Order 1000+ 30cm Rulers

Groove Speaker

1 per order. Applies to LL12, LL11.

*1 per order.

CANNOT BE USED IN CONJUNCTION WITH ANY OTHER LOGO-LINE OFFER. DOES NOT APPLY TO SALE ITEMS. WE RESERVE THE RIGHT TO SUBSTITUTE ITEM/S OF SIMILAR VALUE IF STOCK SOLD OUT OR RUNS OUT. ALL OFFERS EXPIRE 31 AUGUST 2017.

Promotional Productsideas book 2017-2018

LifestyleTechnologyConfectioneryBagsFunky ThingzWrite n RuleNoteworthyPlushKeytags & LightsAuto & TradeHealth & Beauty

FREEFREE

iTunes Gi f t Card M&M DispenserVR HeadsetMovie TicketsGroove Speaker

3 DAY DESPATCH on select stock products.

Pro

mo

tion

al P

rod

uc

ts ideas Book 2017-2018 Edition 21