Hardware Manual of T23
Transcript of Hardware Manual of T23
1
Hardware Guide
Version English-1.0.0
Time Attendance System
ZKS-T23
The introduction of
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
2
companySince 1995, ZKS has been at the forefront of consumer fingerprint products, providing innovative, high-value solutions
for business and consumers. The ZKS name stands for the highest quality products and a profitable partnership. In
1999, ZKS began producing Time & Attendance, Access Control and Door Lock etc. and making ZKS become the
leader in the development of fingerprint applications, comprising R&D, design and manufacture. We have been
offering core fingerprint algorithm technology and mature embedded application products all the time. Our seventeen
R&D members have more than 10 years experience in this field for keeping that we are at the high top of biometric
fingerprint all the while. Our fingerprint products are featured by the integration of their excellent system design and
the precision in algorithms. We offer our global clients with fingerprint products of competitive price, superior quality
and good performance. And we have become a reputable OEM/ODM manufacturer all over the world, and will happily
work with you to develop custom solutions for your security requirements.
History
* 1995: Established a primal bio-identification system named Office Equipment Trading Company for supplying with
fingerprint and OA materials.
* 1999: Began producing Time & Attendance, Access Control, Door Lock etc. and making us became the leader in the
development of fingerprint applications.
* 2002: The Company has been reformed and named Stronger Tech. Co. Limited, establishing a favorable base for
future development. Therefore, we are engaged in R&D, design, manufacture and sales on a big scale.
* 2004: We established the overseas sales department named ZKS Group as international window for global market
in Shanghai, which majors in OEM/ODM manufacture for many valued clients.
*2006: Built up our inner sales department named Xin Stronger Tech. Co. Limited and promote our own independent
brand "ZKS" in China.
* 2007: Get a great sales achievement in domestic and overseas market in the first half a year against at the same
period of last year, forming a high efficient system base in Shanghai, the economic center of China.
* 2008: Upgrading our multimedia series products with GPRS, IP CAMERA and Video Door Phone functions,
channeling off the new Researching and Developing trends in biometric Time Attendance and Access Control system,
making us as the first and unique manufacturer at the top of advanced technology.
Global strategyZKS Group provides China and the world with biometric technologies and related products, together with
technological information services. In our strategy, international investment capital will be utilized to facilitate the
popularization and application of biometric technologies/products in China, and then slowly move from local market
towards the global market. The development strategy of ZKS Group can be described as follows: relying on sale,
manufacture and technology development, undertaking to provide products in full range from hardware, SDK and
Customization and establishing a powerful network of sales in domestic and oversea market.
MANIFESTO: Welcome all friends from all over the world to join in our projects!
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
3
The Hardware Manual of Fingerprint Time Attendance System ZKS-T23
Preamble
Respected users, sincerely thank you for the use of the products of ZKS, Please read the manual and understand the
basic structure of the product, performance, function and master basic knowledge about installation, using,
maintenance and management of the terminal.
ZKS terminals has been adopting with the most advanced technology identification (RF / Fingerprint Identification),
equipped with the controller alone, attendance doors to achieve integration, patented design and an unique wall
hanging generous beautiful structure. They are flexible in the allocation of various identification methods, such as
encoding recognition, fingerprint identification, identification numbers + code, information.
Fingerprint time attendance system ZKS-T23 is an innovative stand-alone fingerprint recorder that can be used mainly
in time attendance application. We can also supply you with its access control function, but it is only an optional
function according to your requests. It is adopted with the northern Korean industrialized design with refined fashion,
integrates ZKS attendance management software, low price with good performance, designed specially in the
purpose of popularizing the fingerprint products. It will bring you much boon because of its excellent function and
competitive price.
The terminal can communicate with its software through RS232 or RS485 and TCP/IP. And by RS485 communication,
the distance can be as far as 1200 meters and the connecting nets can be 31 nets as the most.The capacity of nets
can reach 255 units via TCP/IP communication In addition, we supply with a USB interface, with which you can
transmit the data between the machine and PC and software conveniently. It can work with fingerprint, password,
card, fingerprint+ card, fingerprint +password for high security and precision. It could store 3000 fingerprint templates,
and 80000 transaction records. For the storage of 3000 fingerprint templates, every can register 3 fingers, and even
can register 10 fingers. And In the menu, besides English there are several other languages can be used, such as
French, Spanish, Czech, Indonesian, Portuguese, Turkish and so on.
Terminal supports with optional functions of embedded proximity of HID of Mifare card reader, backup battery. The
false acceptance rate and the truth rejection rate are both very low. With its high recognition rate, high reliability,
stability, long life, large-capacity attendance record, high precision clock, and reasonable structure of device, it is
widely applied to factory, office, bank, hotel, school and so on.
The contents of the hardware manual are not our promise and the company reserves the right to change the manual
without further notice. For any installation or improper use directly, indirectly or unintentionally, inadvertent damage
and dangers, ZKS lives up to any responsibilities.
Without the authorization about the manual copyright of ZKS Group Co., Limited, the manufacturers involved prohibit
the modification and printing brochures. http://www.zksgroup.com/ for more product information of ZKS:
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
4
CONTENTS
Chapter 1 Using Notice.......................................................................................5
1.1Note.............................................................................................................................................................5
1.2 Technical index...........................................................................................................................................8
1.3 System introduction....................................................................................................................................9
1.3.1 Brief introduction...........................................................................................................................................9
1.3.2 Users register fingerprint.............................................................................................................................9
1.3.3 Two kinds of users......................................................................................................................................10
1.4 Terminal maintenance...............................................................................................................................10
1.5 Work principle...........................................................................................................................................10
1.5.1 Fingerprint T&A...........................................................................................................................................10
1.5.2 T&A with card reader (optional)................................................................................................................11
Chapter 2 Appearance and Installation.....................................................12
2.1 Appearance Notes of overall structure.....................................................................................................12
2.1.1 Appearance.................................................................................................................................................12
2.1.2 Functions showing of the keypad.............................................................................................................12
2.2 Equipment installation...............................................................................................................................13
2.2.1 Installation notice........................................................................................................................................13
2.3 Network.....................................................................................................................................................14
2.3.1 Interface for RS232 and RS485...............................................................................................................14
2.3.2. Binding Post on the back of Equipment.................................................................................................14
2.3.3 Communication via RS232 /RS485 (standalone connection)..............................................................15
Chapter 3 Function Menu..............................................................................16
3.1 Data processing........................................................................................................................................16
3.1.2 Admin Reg...................................................................................................................................................21
3.1.3 Sensitivity.....................................................................................................................................................21
3.1.4 Delete...........................................................................................................................................................22
3.1.5 USB Download............................................................................................................................................23
3.1.6 View URec...................................................................................................................................................23
3.1.7 View ARec...................................................................................................................................................23
3.1.8 Delete All Rec..............................................................................................................................................24
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
5
3.2 Setup.........................................................................................................................................................24
3.2.1 System.........................................................................................................................................................24
3.2.2Record...........................................................................................................................................................25
3.2.3Communication............................................................................................................................................25
3.2.4 Light Adjust..................................................................................................................................................26
3.3 System Info...............................................................................................................................................26
3.3.1 User Reg......................................................................................................................................................26
3.3.2 Admin Reg...................................................................................................................................................27
3.3.3 Finger...........................................................................................................................................................27
3.3.4 Card..............................................................................................................................................................27
3.3.5 Password.....................................................................................................................................................27
3.3.6 User Recs....................................................................................................................................................27
3.3.7 Admin Recs.................................................................................................................................................27
Chapter 4 Questions & Answers.....................................................................27
Chapter 1 Using Notice
1.1Note
Please don’t install it in large temperature difference environment
Please install in the room where the temperature is appropriate.
Please don’t install it in dirty and moist places
Otherwise using results and life of the equipment will be greatly affected.
Please don’t let the non-professional staff open the equipment or change the circuit equipment
Otherwise it will cause significant equipment failure even a fire or electrical short.Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
6
Please don’t use sharp objects or weights crushing to blow equipment
Otherwise it may lead to equipment, fingerprint identification and exterior damaged, which will impact the use and
appearance.
Please keep equipment away from dust, water and fire
There may be some short circuit or fire caused by electrical equipment.
Please keep equipment away from magnets and magnetic materials, or the strong local magnetization
It will avoid failure of displaying and storage components of equipment.
Please keep equipment steady
Otherwise it may lead to internal or mobile equipment damage.
Please do not repair privately if equipment fails
If you are in need of repairing equipment, please contact the equipment providers.
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
7
If in exceptional circumstances, we should put device out of door
Special equipment for outdoor use, or distribute a protective shield that can effectively prevent it from malfunction.
Please don’t install the terminal in a private plane
Otherwise the T&A process will fail and abnormal operating conditions will occur.
It is better to managed by two or more admin
It is useful to facilitate the coordination of the work of various departments and the transition of related technical
parameters.
Equipment administrators need to study the methods of operation seriously
And then the equipment can be operated in normal procedure, and kept in good conditions.
Please make a copy of backup data after equipment being used for a period of time
It can avoid documents being lost when abnormal equipment happens.
Please use the power adapter of manufacturer
OEM power adapter is stabilizing and filtering, equipment can be supplied with power effectively with it.
Power
DC9V, 1A (AC100V to 240V, 50-60Hz)
Environment of the use
Temperature 0℃—45℃, Humidity 20%-80%.
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
8
1.2 Technical index
Subject Parameters
Time Required for A Successful
Confirmation
< 1S
Comparison Method 1:1 or 1:N
Time Required for A Failing
Confirmation
< 1.2S
Period of data Keep for 3 years when no current
Confirmation Method 1 Fingerprint or Password
Confirmation Method 2 Proximity or HID or Mifare card (optional)
Confirmation Method 3 F+C or F+P (C: optional)
Communication RS232/RS485, TCP/IP,USB
Network Capacity 31 units (RS485 mode)
Distance 1200m (RS485)
Show Time, ID number, Name
Simply access control (optional) Connect Electronic lock, Electronic bell
Alarm clock Embedded alarm clock
User Number any number between 1 to 65535
Number of Fingerprint Inputs 3 times
Area of Fingerprint Input 16mm × 16mm
FAR ≤0.0001%
FRR ≤0.01%
Fingerprint Capacity 3000 fingerprints
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
9
Management Records 1000 entries
Attendance Records 80000 entries
Rs232 Baud Rate 9600,19200,38400,115200
Rs485 Baud Rate 9600,19200,38400,115200
Working Language Chinese, English, option with Spanish,
French and so on
Working mode T&A , standalone, can work persistently
Save function Turn off device automatically for saving
Power Consumption <9W
Power SupplyDC9V, 1A (AC100V to 240V, 50-60Hz)
backup battery (optional)
Warranty of period 24 months
Size 189*50*137mm
Weight 2 kg
Working Environment Temperature 0-45℃
Humidity 20%-80%
Applications Factory/office/bank/hotel/school etc.
1.3 System introduction
1.3.1 Brief introduction
T&A system is divided into two parts: Terminal and T&A (Time and Attendance) management software.
Terminals primarily are responsible for day-to-day T&A, building card files. You can keep communication between
terminal and management software after plugging terminal to power supply and linking it to network.
Access database management software, in which manager can establish staff files and other information to terminal
by RS232/RS485 and TCP/IP. And manage can also upload logs from terminal to management software for analyzing
report of shift. In addition, the USB interface makes data transmission between terminal and software more
convenient
And the software supply path to SQL2000.
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
10
Terminal and management software can be communicated by RS232/485 and TCP/IP.
1.3.2 Users register fingerprint.
First of all, users establish an ID No. and then under this ID No., register your finger by pressing the same finger for
three times. Terminal will get the character of your finger under that ID No., and store it into fingerprint memory. When
verifying, Terminal identifies status by comparing the current finger with previous registered one.
Under the same ID No., one user can register three different fingerprints, and even can register 10 fingers.
1.3.3 Two kinds of users
The users include administrators and general users:
1.3.3.1 Administrators:
Those who are authorized to operate all the procedures on the terminal, browse the deleted or recorded data,
browse the system information and set up functions and environment. Since the administrators have the right to
manage all the procedure on the machine, it is important for him to remember his password firmly, it is troublesome if
it is forgotten by carelessness. Please contact with the manufacture if that happens
1.3.3.2 General users:
General users are the users who can only press their fingers or wipe their cards or input their passwords to leave
their logs. If they verify by finger, then they can press their fingers on the sensor directly or input their ID number first,
then press their fingers. If verify by password, they should first input their ID number, and then input their password to
verify.
1.4 Terminal maintenance
Please pay attention to the following items
(1). Please clean dust on the sensor first of all;
(2). Please wipe sensor with clean tampon;
(3). Please don’t wash sensor with water, alcohol and other lotion;
(4).Please don’t press sensor with force.
1.5 Work principle
1.5.1 Fingerprint T&A
Fingerprint terminals receive digital signals through fingerprint image recording equipment recognition memory, as
well as external equipment (such as locks, door buttons and other equipment) controller.
It is the Irreplaceable fingerprint character that shows one’s status, Fingerprint sensors capture the human finger
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
11
and then combine fingerprint image acquisition with software, every one could register ten fingerprints. And the
fingerprints images are made into corresponding encrypt documents stored in the machine.
When staffs put their fingers onto the sensor, sensor will compare the fingerprint put on just now with the original
image of the register, so it is very important for us to register the good fingerprint at first. It will show successful if
fingerprints are accordant, or else, there are some differences between them, such as, too dry, too wet, too dirty,
exposed skin or so on (see pictures below). In order to avoid this situation, we’d better to register other two backup
fingers. And for fingerprint registering, the recommendation of the fingers: the thumb, index finger and middle
finger.register and so on.
After staff put their fingers onto sensor, their info of fingers and time of T&A are recorded into terminal and then
transmit their info from terminal to computer by appropriate modes, such as, RS232 or RS485. After analyzing these
data on management software by managers, statements in attendance will be showed up. Excel spreadsheet of
printing can also be derived
Note: When register finger, the user should put his/her finger on the correct posture, see the following picture:
Correct Posture
1.5.2 T&A with card reader (optional)
T&A terminal is storage equipment which records digital information by receiving terminal identification card, as well
as external equipment (such as locks, open buttons and other equipment) controller.
There are particular frequency induction coils in internal cards and CMOS chip, each card corresponds to the
only one number. With each card staff files will be established in the management.
When cardholders wipe their cards on card-reader areas, then their particular status are recorded and stored into
the terminal. By appropriate means of communication, such as, RS232 or RS485 and TCP/IP. The information will be
sent to the T&A management computer, after analyzing these data on management software by managers,
statements in attendance will be showed up. Excel spreadsheet of printing can also be derived. But it is invalid if the
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
12
staff did not register with the card before.
Chapter 2 Appearance and Installation
2.1 Appearance Notes of overall structure
2.1.1 Appearance
Describe the exterior appearance and equipment.
2.1.2 Functions showing of the keypad
2.1.2.1. Keyboard configuration
2.1.2.2. Keyboard Function
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
13
ESC Exit or cancel a menu
MENU Enter into machine menu
OK Confirm
⊙ Switch on or off machine
▲ Move up the menu
▼ Move down the menu
0-9 Input numerical values
2.1.2.3 Function keys for Clock In/Out
(a) “▲” – Clock In
When machine works under function keys for clocking In/Out , but without any shift setting on the software,, “▲”
means clock in , press key of “▲” before clocking in ,it will appear “In” on LCD, meanwhile it will show as status of “ in
” instead of “ auto ” in the attendance report .
(b) “▼” – Clock Out
When machine works under function keys for clocking In/Out, but without any shift setting on the software, “▼” means
clock out, press key of “▼” before clocking out, it will appear ”Out” on LCD, meanwhile it will show as status of “out”
instead of “ auto ” in the attendance report .
2.2 Equipment installation
2.2.1 Installation notice
Make sure that the terminal equipment is installed in the room. If being installed outdoors, you should notice that
water exposed to the adverse circumstances.
Make sure that the equipment is installed with metal grounded backplane in order to avoid the current pulse and
avoid shocking terminal equipment.
To prevent electrical short circuit, we suggest you not share power with other equipments.
You should avoid the direct exposure of sunlight or a large number of sandstorms in this region. otherwise it will
affect the use of keyboard.
Because of the small size of terminal, it can be installed at any place. If terminal is used for access control or
T&A, it should be installed beside the door so that users can check in and out automatically before doors unlocked.
You should pay attention to two points about site of installation: One is that you should ensure that there is
enough air for dispelling heat, the other is that do not install it near the place with the source of heat, direct irradiation
and lots of dust.
The installation of metal backboard is necessary and it can release static if users when connected to power
supply with the earth wire.
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
14
2.3 Network
2.3.1 Interface for RS232 and RS485
2.3.2. Binding Post on the back of Equipment
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
15
2.3.3 Communication via RS232 /RS485 (standalone connection)
2.3.4 TCP/IP environment with multi units
Note: To connect the machine a bit far (1.5 meters), or multi sets of machines, please use the RS485 communication
method. And the distance by RS485 mode can be as far as 1200 meters.
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
16
Chapter 3 Function Menu
Press key 【Menu】,then it enters into the three submenus on the LCD 【Data Proc】, 【Setup】,【System Info】for your
option with ▲ and ▼.
3.1 Data processing
3.1.1Users register
After entering into the menu, select 【Data Proc.】(means data processing),select the submenu 【UReg.】(means
users register), then general users can register. There are five kinds of register mode:
3.1.1.1【Finger】:Select “finger” item, then it comes to the window:” New Reg. (YES-OK, NO-ESC)”
Finger New Reg?No-ESC Yes-OK
(Here” Reg” means Register)
Select YES, then it will spring an ID number for you, and click OK to register under this ID number. The ID number will
be increased by degrees automatically from 00001.
After clicking OK, it will appear the following windows for your pressing one of your fingers for three times
New Reg
Place Finger #1
New Reg
Remove Finger!
New Reg
Place Finger #2
New Reg
Remove Finger!
New Reg
Place Finger #3
New Reg
Remove Finger!
Every new register should press his/her finger for three times,
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
17
(Note: the register finger here must be the same one, if not, it will show you: “Enter Again” as follows. Then you must
press your finger for another three times)
New RegEnter Again
And if the finger is the one that has been registered before it will show you as follows, then you have to change
another finger that has not been registered on this machine before
RemoveFP Double
After pressing the same finger for three times successfully, please remember to click OK to save.
New Reg00001-0
Ign-ESC Sav-OK
(Here “Ign” means Ignore, and “Sav” means Save)
After saving, this will be another window: Continue? (YES-OK, NO-ESC),
(Note: if not save, the register this time is invalid. And it also comes to the same window as the one after saved as
follows:
Finger Continue?No-ESC Yes-OK
Select OK if you want to register under a new ID number or under the same ID number. Select ESC then it will go
back to the menu【finger】
Finger New Reg?No-ESC Yes-OK
Selecting OK means that you can register another finger under a new ID number on the following interface:
New RegID 00002Ign-ESC Sav-OK
;
While selecting ESC means continuing to register under the same ID number. Then it will show you:
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
18
Then you can click OK to begin to register another finger under the same ID number, and the step is the same as the
register of the first finger;
(Note: when you have already registered three fingers under a same ID number, and still continue to register under
this ID number, then it will shows your the following window:
Backup RegID 00001
Reg Error
3.1.1.2【Card】:After entering into the menu, select 【Data Proc.】(means data processing),select the submenu 【UReg.】(means
users register), and select【Card】, then general users can register by card
After selecting “card” item, then it comes to New Reg. Window (YES-OK, NO-ESC),
Card New Reg?No-ESC Yes-OK
Select YES to register under a new ID number by wiping your card (see interface below), and click OK to register
under this ID number. The ID number will be increased by degrees automatically from 00001.
After wiping your card, it shows:
Card In 25365Ign-ESC Sav-OK
Don’t forget to click OK to save, if select ESC, it will go back to the menu【Card】, then this card register is invalid.
New Enroll 00002-0CNo-ESC Yes-OK
Click OK to save, after saving, there will be another window: Continue? (YES-OK, NO-ESC), Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
19
(Note: if not save, the register this time is invalid. And it also comes to the same window as the one after saved as
follows:
Card Continue?NO-ESC YES-OK
Select ESC to back to menu【Card】;Select OK to enter into the following interface.
Card New Reg?No-ESC Yes-OK
Click OK to continue to register a new card under a new ID number, The ID number will be increased by degrees
automatically from 00001. If you select ESC, then it comes to
Backup Reg ID 00002ESC Yes-OK
Select ESC to get back to the menu【Card】, if select OK, then it will show you
Backup RegID 00002
Reg Error
That is to say, you can only register one card under an ID number.
3.1.1.3.【Password】:With the same method, Select “password” item, then it comes to New Reg. Window (YES-OK, NO-ESC),
Password New Reg?No-ESC Yes-OK
Select YES to register under a new ID number,
Password PWD In Ign-ESC Sav-OK
Input your password and save it, you have to confirm your password a second time
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
20
Password PWD In ****Confrm No-ESC Yes-OK
( “Confrm” here means Confirm)
After inputting the same password for the second time, it will come to the window:
Password 00002-0PIgn-ESC Sav-OK
Click OK to save, after saving, there will be another window: Continue? (YES-OK, NO-ESC),
(Note: if not save, the register this time is invalid. And it also comes to the same window as the one after saved as
follows:
Password Continue?NO-ESC YES-OK
Select OK to enter into the following interface.
Password New Reg?No-ESC Yes-OK
Select OK to continue register a new password under a new ID number, The ID number will be increased by degrees
automatically from 00001. If you select ESC, then it comes to
Backup Reg ID 00002ESC Yes-OK
Select ESC to get back to the menu【password】, if select OK, then it will show you
Backup RegID 00002
Reg Error
That is to say, you can only register one password under an ID number.
3.1.1.4【F+C】:Select “F+C” item, it will also come out Window: New Reg. (YES-OK, NO-ESC),
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
21
FP +Card New Reg?No-ESC Yes-OK
select YES to get a new ID number for you, under this ID number , you should first register your finger by pressing
you finger for three times, the step is the same as 3.1.1.1【finger】register. and then register with card, and the
step is the same as 3.1.1.2【card】 register. Remember to save it. While selecting this method to verify by both
fingerprint and card, you should firstly enter into the menu, select【Setup】,and select submenu 【System】, then
change the【Verify mode】to ensure F+C mode
3.1.1.5【F+P】:Select “F+P” item, it will also come out Window: New Reg. (YES-OK, NO-ESC),
FP+PWD New Reg?No-ESC Yes-OK
select YES to get a new ID number for you, under this ID number , you should first register your finger by pressing
you finger for three times, the step is the same as 3.1.1.1【finger】register, and then input your password twice, the
step is the same as 3.1.1.2 【password】register. And remember to save when finished. While selecting this method
verify by both fingerprint and password, you should firstly enter into the menu, select【Setup】,and select submenu
【System】, then change the【Verify mode】to ensure F+P mode.
.
3.1.2 Admin Reg.
After entering into the menu, select 【Data Proc.】,and select the submenu【AReg.】(AReg. means admin register)
Admin can register There are also five register mode:【Finger】【Card】【Password】【F+C】【F+P】The step of Administrator register is the same as users register, every Admin also can register three different fingers,
and every machine can register at least 1 admin and maximum 10.
Note: It is easy for managing with more admin, and please do not forget or lose the information. It is important to
remember the password firmly. It is troublesome if it is forgotten by carelessness. Please contact with the manufacture
soon if that happens
After admin register, when go back to the main interface, and enter into the menu , press the key【menu】, and this
time you can not enter into it directly, instead it is followed by a display of “Admin? ”, at this time, general person
cannot enter into the main menu until the administrator has been identified successfully , then it will show: 【Data
Proc】, 【Setup】, 【System Info】for your option with ▲ and ▼.
3.1.3 Sensitivity
After entering into the menu, select 【Data Proc.】,and select the submenu 【Sensitivity】,Its function is to change the
rate of verification precision. It includes the following three options
3.1.3.1【Comparison】:Under the menu【Sensitivity】, select【Comparison】
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
22
It used for aiming at individual. For example, one user’s finger was broken in one day, and it’s difficult for him to verify
if the sensitivity numerical value is high, so admin can change his sensitivity down by Comparison in order to verify
easier. The other way, if one’s finger is easy to verify, we can change this parameter a little high to make a high
precision for him.
After clicking 【comparison】, then input the ID number of the person who need to change his/her verify precision.(
picture 1).click the key “OK” to enter into the interface as picture 2; continue to click “OK” to enter picture 3, now you
can change the numerical value, The value scope is between 0—50.the higher the value, the more precision.
1 2 3
3.1.3.2【Init. 1:1】:If the Verify Type is 1:1, 1:1 means when verify, you must enter user’s ID number before pressing fingerprint, or
inputting password, or wiping card, the machine itself will select the ID number for comparing between current status
and the registered one . Admin can adjust sensitivity numerical value by 【Init 1:1】 , the scope is also between 0—50
,
3.1.3.3【Global】:If Verify Type is 1:1: N or 1: N, 1: N means verifying by pressing fingerprint, or inputting password, or wiping card
directly. The machine itself will recognize you by comparing between the current status and all the registered ones.
Verify Type 1:1: N contains both 1:1 and 1: N verify type. Admin can adjust sensitivity numerical value in 【Global】, the
scope for sensitivity numerical value is between 1—4.
3.1.4 Delete
After entering into the menu, select 【Data Proc.】,and select the submenu【Delete】, then you can delete the
registered information After deleting, he/she can not be verified by prior registered finger or password as before.
Delete the users with inputting his/her ID number 【 Delete ID 0000 】 , including fingerprint, password.
Inputting his/her ID number in the window above, then it comes as follows for you to choose which register under the
ID number
Input the one you want to delete, then it shows you
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
23
If you do not want to delete now, you can also select ESC to exit. Select YES to delete it successfully and enter into
another delete interface for another register under this ID number.
After deleting all the registers under this ID number, it will hint you as follows:
(Note: If there is only one register under this ID number, it will hint you with the same interface as above)
If only delete one of its information under an ID number, and there is still other finger or password, he/ can still verify
his status by the leaving fingerprint or password under the ID number.
3.1.5 USB Download
We supply you with a USB interface aside the machine. Then this menu can be used for download all staff attendance
logs by U-disk. Which make the transmit of data more conveniently
First, you plug a U-disk in. and then enter into the main menu, select 【Data Proc.】and then select the submenu【USB
download】 , select relative menu items to download until it shows you: download OK! the relative items and
meanings are as follows:
3.1.5.1【Glog】 : “Glog” means general logs. Select this to download general users’ attendance records (the new
attendance records after being downloaded last time)
3.1.5.2【All Glog】:Select this to download all general users’ attendance records on the machine
3.1.5.3【Slog】 : “Slog” means super logs. Select this to download administrators’ attendance records (the new
attendance records after being downloaded last time)
3.1.5.4【All Slog】: Select this to download all administrators’ attendance records on the machine
3.1.5.5【All Enroll Down】:Select this to download all the register records
3.1.5.6【All Enroll Up】: Select this to upload all the register records
Note: if you have not plugged a U-disk in, or have not formatted the U-disk, it will show you: “Device Error”. We
suggest FAT32 for format of U-disk
3.1.6 View URec
After entering into the menu, select 【Data Proc.】,and select the submenu【View URec】(URec. Means users record)
Then Admin can check users’ records by inputting the ID number【URec. ID 0000】,
After inputting the ID number and selecting OK to confirm, there will be the record information interface,
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
24
It shows the verifying date, time, mode, C-0000x (C means total amount of users records of this ID number) and N-
0000x (N means the sequence number of the current record).Admin can check all records one by one through ▲, ▼
or “OK”.
3.1.7 View ARec
After entering into the menu, select 【Data Proc.】,and select the submenu【View ARec】(ARec means admin
records)
.The same as 【View URec.】 Admin can check admin records by this way, and check all records one by one through
▲, ▼ or “OK”.
3.1.8 Delete All Rec
After entering into the menu, select 【Data Proc.】,and select the submenu【Delete All Rec】Admin can delete all
records by this menu, including user and admin records. Then we can not see any records in the menu.
3.2 Setup
After entering into the main menu, select 【Setup】,then you can set up the kinds of parameters that you need.
3.2.1 System
After entering into the menu, select 【Setup】,and select the submenu【System】. Then you can set up the system
parameters according to your requirements.
3.2.1.1.【Admin Max 5】:Every machine can register maximum 10 admin, and its minimum is 1. The default value is 5. It is better to have more
admin for management.
3.2.1.2【Language】:The default menu language is English. You can also select other languages for the menu, such as French, Spanish,
Korean, Portuguese, Turkish and Indonesian and so on.
3.2.1.3.【Date Format】:You can setup the date format of the machine by this, including YMD, DMY and MDY.
3.2.1.4.【Time】:You can set the inside time of the machine by this menu.
Note: you can only adjust the time by ▲ and ▼, and click OK to adjust the next item
3.2.1.5.:【Voice Out】:
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
25
Select YES or NO to decide whether hint voice while verifying on the machine. Selecting no, then there is no voice to
give out when you are verifying.
3.2.1.6【LCD Contra】:This can adjust LCD contraction degree to a certain number. The max value is 60. The default value is 30. The higher
the value is, the more clearly the LCD will display
3.2.1.7.【Unlock】:You can setup a value, then the door will be closed automatically in the setting time, the value is from 1-255 seconds
for your option. This applies to connecting with access control system.
3.2.1.8.【Bell】:You can set up how long the bell will ring when it is reaching a certain time. Its scope is from 0 second to 15 seconds.
Note: You can set up disabling this function with 0 second.
3.2.1.9【Auto Off】:You can set up automatic off for the machine according to the time with this menu, then the machine will automatically
power off when it reaches that time. Selecting NO means disable this function.
Note: The unit is minute.
3.2.1.10.【Verify Mode】:This includes F/P/C, F+C, F+P, if select F/P/C, you can verify at any method; if you want to register by two modes at
the same, you should select F+C or F+P. If select F+C, all the users should register by both fingerprint and card, when
verify, users should first wipe their cards, then you should press your finger; And if select F+P, all the users must
register by both fingerprint and password., when verify by inputting ID number first, then users should input password
at first step, second press fingers; when verify directly, users should firstly press fingers, secondly input password.
3.2.1.11.【Verify Func.】 “Verify Func.” means “Verify Function”. This includes 1:1, 1: N, 1:1: N, 1:1 means when verify, you must enter user’s
ID number before pressing fingerprint, or inputting password, or wiping card, the machine itself will select the ID
number for comparing between current status and the registered one. 1: N means verifying by pressing fingerprint, or
inputting password, or wiping card directly. The machine itself will recognize you by comparing between the current
status and all the registered ones. In general we select 1:1: N or 1: N;
3.2.1.12.【Default Setup】You can select this menu to make the machine become default setting after leaving factory. All the parameter set by
admin will be lost after this operation。
3.2.2Record
After entering into the menu, select 【Setup】,and select the submenu 【Record】 ,you can set up parameter
concerning to records by this.
3.2.2.1.【ARec.Alert】“ARec.Alert” means “Admin record Alert”. You can set a value by this menu, then the machine will give out alert when
the stored admin records reaching the value. The value scope is from 0 to 255.
If it can store 10000 records, when you set 200 here, then it will alert you when the records reach 9800.
3.2.2.2.【URec.Alert】“URec.Alert” means “User record Alert”. Also, you can set a value by this menu. The value scope is from 0 to 1500.
If it can store 70000 records, when you set 200 here, then it will alert you when the records reach 69800.
3.2.2.3.【Reverify】
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
26
“Reverify” means “Re-verify”. You can set a value, for example “3”, then one user can verify only once in 3minutes; if a
user verify twice or more in 3 minutes, then the machine will hint you. The value scope is from 0 to 255.
3.2.3Communication
3.2.3.1【Device NO.】The Device Numbers are from 1-255 for option. If there are multi nets to be connected together, then you can set
them with Device NO.1; Device NO 2; Device NO. 3 etc., but neither of them can be the same. When connected with
the manage software, the device NO. of the machine must be the same as the manage software.
3.2.3.2【Baud Rate】It is a parameter needed to set for communication, if terminal was connected with PC and software by RS232/RS485,
then the Baud Rate on the terminal must be the same as the PC’s and software. They are 9600, 19200, 38400,
115200. Default Baud rate is 38400. After entering into the menu 【 Setup 】 , then enter into
submenu【Communication】,select 【Baud rate】,then you can choose the value by pressing the key “▲” and “▼”.
Please refer to the software manual or consult the sales manager for more details of connecting mode.
Note: Communicating by RS232/485, Baud rate, on the machine should be the same as software.
3.2.3.3【Port NO.】You can set the Port NO. on the machine here, and you must keep it the same value when communication with
software, if terminal was connected with PC and software by TCP/IP. You must keep Port No. on software the same
as the terminal. We suggest Port No. is 5005
3.2.3.4【PWD COM】That is Password of Communication. Set up password to connect server with terminal, Default PWD of
communication is 200409 or 0. After entering into the main menu, select the menu【 Setup】 , then enter into
submenu【Communication】, click【PWD COM】to show the current parameter, click OK to input a new password, click
OK to save it after inputting the value.
3.2.3.5 【IP Address】It is used for communication between the terminal and management software by TCP/IP. In this part, you must set up
fixed IP address and it must be the same as the software. After entering into the main menu, select the menu【Setup】,
then enter into submenu【Communication】, click 【IP Address】, then press OK to Input IP Address (depending on the
Locate IP network addresses, such as 192.168.0.160. It must be in the same network but different from host computer
IP Address).
Note: The IP address is only for TCP/IP communications.
3.2.3.6【Subnet mask】The subnet mask, which is required for TCP/IP to work, is used by the TCP/IP protocol to determine whether a host
computer is on the local subnet or on a remote network. Subnet mask is 255.255.255.0
3.2.3.7【Default gateway】It is the router’s IP address connected with the host computer in the same subnet. Default gateway is 192.168.001.001.
3.2.3.8【RS485】Decide whether to communication by RS485, if communication by RS485, you should select Yes here; if not, then
select No.
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
27
3.2.4 Light Adjust
After entering into the menu, select 【Setup】,and select the submenu【Light Adjust】, You can adjust the light degree
of fingerprint sensor through this menu.
3.3 System Info
After entering into Menu, select【System Info.】(means System Information). There are three pieces of information for
browsing.
3.3.1 User Reg
It shows the quantity of users that have registered on the machine. For example, if it shows 3, it means that there are
3 users registered on the machine.
3.3.2 Admin Reg
It shows the quantity of admin that have registered on the machine. You can query the quantity of admin register by
pressing OK when you on the “User Reg” interface. For example, if it shows 3, it means that there are 3 admin
registered on the machine.
3.3.3 Finger
It shows the quantity of fingerprint registered on the machine. For example if it shows 3, then it means that there are 3
fingerprints registered on the machine.
3.3.4 Card
It shows the quantity of card registered on the machine. You can query the quantity with card register by pressing OK
when you on the “Finger” interface. For example if it shows 3, then it means that there are 3 cards registered on the
machine.
3.3.5 Password
It shows the quantity of password registered on the machine. You can query the quantity with password register by
pressing OK when you on the “Card” interface. For example if it shows 3, then it means that there are 3 passwords
registered on the machine.
3.3.6 User Recs
It shows the user attendance records quantity that have stored on the machine. For example, if it shows 3, it means
that the quantity of the users’ attendance records is 3.
3.3.7 Admin Recs
It shows the admin attendance records quantity that have stored on the machine You can query the quantity of admin
attendance records by pressing OK when you are on the “User Recs” interface. For example, if it shows 3, it means
that the quantity of the admin attendance records is 3.
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
28
Chapter 4 Questions & Answers
Frequently Asked Questions
Question 1: Are there any notes in the installation and using fingerprint terminal?
Answer: We should note the matters of the following three aspects of the using of fingerprint terminal:
(1) Initialize the fingerprint terminal before using, to prevent the existence of lawless fingerprint and lawless
password.
(2) The installation of fingerprint terminal affects its future using directly, so please install it by the professional
personnel according to the requirements of ZKS Company strictly, and please don’t change the installation
requirements and parameters optionally.
(3) Pay attention to the maintenance of Fingerprint terminal during the daily process, to ensure that it is running in
the good environment.
Question 2: Could it still verify when the Fingerprint Window is dirty?
Answer: It can work when the Fingerprint Window is dirty, but you must pay attention to the maintenance of finger
terminal and especially the fingerprint window at any time. General speaking, please wipe the fingerprint window with
the soft cloth, but note not to use the organic solvent of viscous liquid, alcohol or oil etc.
Question 3: What about the durability of fingerprint module? How long has it been used in normal condition?
Answer: Fingerprint terminal adopts the most advanced fingerprint module, this fingerprint module is processed with
toughened & thick glass material, of which wearable degree is strong and normal operation life can reach up to five
years.
Question 4: Fingerprint could be copied, can the copied fingerprint be used to verify?
Answer: Fingerprint picture can be copied, but the copied fingerprint picture cannot be identified on the living
fingerprint sensor, this is because the Fingerprint terminal adopts the most advanced living fingerprint identification
technology and finger sensor can verify well only for living object fingerprint.
Question 5: Whether someone's fingerprint is the same as yours and can verify my terminal?
Answer: No fingerprint is the same as yours, because the fingerprint is varied as different people, even that the
fingerprints of ten fingers of a person are not the same.
Question 6: What can I do if my registered finger is scratched? Can I verify freely?
Answer: If your finger is just scratched a little, it won't affect the opening function of fingerprint, because it adopts the
automatic restoring function in ZKS Fingerprint terminal, fingerprint sensor can restore the rupture of fingerprint
according to the trend of fingerprint, so as not to affect the normal verifying of fingerprint. But the restoring function of
fingerprint cannot realize the complete restoring when the finger is scratched seriously, so we suggest that you
register one or two backup fingerprints, if your registered fingerprint is injured, you can use the backup fingerprint to
verify; if your fingers are all injured, you can input the password or card.
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.
29
Question 7: Most of others' fingerprint terminal adopt capacitance fingerprint sensor, but ZKS fingerprint terminal
adopts optics fingerprint sensor, which is better?
Answer: In current, the technology used for collecting fingerprint image is optics technology and capacitance
technology. Capacitance technology obtains the complete fingerprint by the measurement of chip, the price of the chip
is expensive, the collection range is small, but fingerprint collection is not reliable, which causes the difficulty to the
using of users, in addition, it is easy to be interfered, whether static interference, salinity of sweat or other swag and
the abrasion of finger can make collection head be difficult to read fingerprint. But for optics, it collects fingerprint by
the reflection of light, optics fingerprint collection head provides more reliable solution and improves the primary optics
image-capturing technology, the new optics fingerprint sensor adopts the imaging technology with 500 DPI, which is
suitable to peoples aged 6 to 80; adopt the newest light road imaging system and increase the exoteric anti-
interference ability; the surface of fingerprint sensor uses nanometer plating film to deal with and make the fingerprint
sensor more wearable, it make the capacitance sensor be outshone as the unquestionable character and favorable
price.
Send Message 15 800 6000 15If you using a mobile phone or dialing from Dubai, Macau, Istanbul or areas outside China,Please call: (86-21) 6767 9389www.zksgroup.com www.zksgroup.com.br www.zksgroup.es www.zksgroup.co.ukwww.zksgroup.in www.zksgroup.com.ar www.zksgroup.fr www. zksgroup. com.auwww.zksgroup.com.mx www.zksgroup.ae www.zksgroup.de552, Dongzhou Road, The Second Section of Dongjing Industrial Park, Dongjing 201619, Songjiang, Shanghai, China.