Handling and use: MARTOR-Profi25 · 2013. 4. 10. · MARTOR-Profi25 To keep the automatic safety...
1
Operating Instructions for Safety Knives with automatic blade retraction. The blade will automatically and instantaneously retract into the safe position when the cutting operating is completed. Do not hold your thumb on the blade slider while cutting. IMPORTANT! - remove your thumb from the slider - don't worry - the material will hold the blade in the open position. Insert the blade into the materi- al, eg cardboard and continue to cut. Klinge mit dem Klingenschieber in Pfeilrichtung aus dem Griff schieben. 11.07.1.7 neu · Printed in Germany · Technische Änderungen vorbehalten. Handling and use: If you have any questions, please contact us. T.: +49 212 25805-0 F.: +49 212 25805-55 E.: [email protected] Please visit our homepage www.martor.com Waste manage- ment of blades: Never throw used blades into the wastepaper! High risk of injury! MARTOR SAFEBOX No. 108000 another novel contribution to SAFETY: Designed to snap-off used blade sections and/or to SAFE - keep used blades (max. length 62 mm). To empty the contents, fold the "outer case" back by 180 degrees. The transparent cover can now be opened and the contents be emptied, preferably, into the MARTOR USED BLADE CONTAINER No. 9810 - WALL MOUNT BRACKET optional. WRONG Finally, work the slider to check that the auto-retract mechanism is working smoothly. Push the central mechanism in the direction of the arrow. ATTENTION: Never hold your hand in front of the blade exit while inserting the blade! Make sure you position the new or turned blade exactly over the lo- cating lugs. IMPORTANT: Locate index finger below the black blade change cover so as to make sure that the blade cannot drop out! Squeeze blade mount insert - together with the blade push - out of handle. CAUTION: Don't pull the insert whilst holding on to the blade push! Blade change: Cutting Depth Adjustment: CAUTION - Risk of cutting accidents! 1. Undo the screw 2. Adjust blade push to the desired blade extension 3. Hold the blade push in this position and 4. tighten the screw at the aft limit stop IMPORTANT: Make sure not to turn the lock screw by more than one turn! ! WRONG CAUTION: When opening the cutter, never hold the slider. You may injure yourself or damage the retractor mechanism. WRONG ! Blade slider MARTOR-Profi25 To keep the automatic safety function fully active, it is important to ensure that the cutter is clean and free from any material residue at all times. Central mechanism For left-handers simply turn the blade by 180 degs! ! Lock Screw MARTOR-Multiset Blade slider Central mechanism
Transcript of Handling and use: MARTOR-Profi25 · 2013. 4. 10. · MARTOR-Profi25 To keep the automatic safety...
Operating Instructions for Safety Knives with automatic blade retraction.
The blade will automatically andinstantaneously retract into thesafe position when the cuttingoperating is completed.
Do not hold yourthumb on theblade slider whilecutting.
IMPORTANT! - remove yourthumb from the slider - don'tworry - the material will hold theblade in the open position.
Insert the blade into the materi-al, eg cardboard and continueto cut.
Klinge mit dem Klingenschieberin Pfeilrichtung aus dem Griffschieben.
11.0
7.1
.7 n
eu · P
rinte
d in
Germ
any
· Te
chnis
che Ä
nderu
ngen v
orb
ehalte
n.
Handling and use:
If you have any questions, please contact us.
T.: +49 212 25805-0 F.: +49 212 25805-55 E.: [email protected] visit our homepage www.martor.com
Waste manage-ment of blades:Never throw used blades into thewastepaper! High risk of injury!
MARTOR SAFEBOX No. 108000another novel contribution toSAFETY: Designed to snap-offused blade sections and/or toSAFE - keep used blades (max.length 62 mm). To empty thecontents, fold the "outer case"back by 180 degrees.
The transparent cover can nowbe opened and the contents beemptied, preferably, into theMARTOR USED BLADE CONTAINER No. 9810 - WALLMOUNT BRACKET optional.
WRONG
Finally, work the slider to checkthat the auto-retract mechanismis working smoothly.
Push the central mechanism inthe direction of the arrow. ATTENTION: Never hold yourhand in front of the blade exitwhile inserting the blade!
Make sure you position the new orturned blade exactly over the lo-cating lugs.
IMPORTANT: Locate index fingerbelow the black blade changecover so as to make sure thatthe blade cannot drop out!
Squeeze blade mount insert -together with the blade push -out of handle. CAUTION: Don'tpull the insert whilst holding onto the blade push!
Blade change:
Cutting Depth Adjustment:
CAUTION - Risk of cutting accidents!
1. Undo the screw2. Adjust blade push to the desired blade extension3. Hold the blade push in this position and4. tighten the screw at the aft limit stop
IMPORTANT:Make sure not to turn the lock screw by more than one turn!
!
WRONG
CAUTION: When opening the cutter,never hold the slider. You may injureyourself or damage the retractor mechanism.WRONG
!
Blade slider
MARTOR-Profi25
To keep the automatic safety function fullyactive, it is important to ensure that thecutter is clean and free from any materialresidue at all times.
Central mechanism
For left-handers simply turnthe blade by 180 degs!
!Lock Screw
MARTOR-Multiset
Blade slider
Central mechanism
